- 18 May, 2020 1 commit
-
-
https://github.com/nbd168/wirelessKalle Valo authored
mt76 patches for 5.8 * new devices for mt76x0/mt76x2 * mt7615 fixes * mt7663 fixes * support for non-offload firmware on mt7663 * hw/sched scan support for mt7663 * mt7615/mt7663 MSI support * TDLS support * mt7603/mt7615 rate control fixes * new driver for mt7915 * wowlan support for mt7663 * suspend/resume support for mt7663 # gpg: Signature made Thu 14 May 2020 01:10:07 PM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
-
- 14 May, 2020 1 commit
-
-
Lorenzo Bianconi authored
Fix typo defining ps_work in mt7615_register_ext_phy(). This is not a real issue since 802.11 power save is not yet support by the external phy Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
- 13 May, 2020 18 commits
-
-
Sean Wang authored
Introduce essential bss information for multiple vifs hw_scan in mt7615_mcu_uni_add_dev adding the interface Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Co-developed-by:
-
Lorenzo Bianconi authored
Introduce p2p-go/p2p-client suppor to mt76 driver Co-developed-by:
-
Lorenzo Bianconi authored
Differentiate hw scan channel time between passive and active scan Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following kernel warning that occurs if scan work is scheduled and the hw scan has been cancelled by mac80211 WARNING: CPU: 1 PID: 502 at net/mac80211/scan.c:391 __ieee80211_scan_completed+0x299/0x690 Modules linked in: CPU: 1 PID: 502 Comm: kworker/u4:4 Not tainted 5.7.0-rc1+ #2882 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Workqueue: phy0 ieee80211_scan_work RIP: 0010:__ieee80211_scan_completed+0x299/0x690 RSP: 0018:ffffc9000036fda8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 8c6318c6318c6320 RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff88803bb129b8 RBP: ffff88803bb10d80 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88803bb12ae8 FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f13ee5c1470 CR3: 000000003c790000 CR4: 00000000000006a0 Call Trace: ieee80211_scan_work+0x170/0x850 ? sched_clock_cpu+0x11/0xb0 process_one_work+0x24f/0x580 ? worker_thread+0xcc/0x3e0 worker_thread+0x4f/0x3e0 ? process_one_work+0x580/0x580 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x3a/0x50 irq event stamp: 9255532 hardirqs last enabled at (9255531): [<ffffffff81a504e4>] _raw_spin_unlock_irq+0x24/0x30 hardirqs last disabled at (9255532): [<ffffffff81001b3f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (9255526): [<ffffffff8107c9ef>] process_one_work+0x24f/0x580 softirqs last disabled at (9255524): [<ffffffff815f2f41>] mt7615_scan_work+0x91/0xc0 Signed-off-by:
-
Sean Wang authored
mt7615_mcu_sched_scan_enable should be taken along with mt7615_mcu_sched_scan_req to have proper scan plans initialization. Fixes: bd39bd2f00c3 ("mt76: mt7663: introduce WoW with net detect support") Co-developed-by:Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by:
Soul Huang <Soul.Huang@mediatek.com> Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2020-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second set of iwlwifi patches intended for v5.8 * Support new FW APIs; * Remove some old and unused features; * HW configuration rework continues; * Some queues rework by Johannes; * Enable A-AMSDU in low latency; * Some debugging fixes; * Some other small fixes and clean-ups; # gpg: Signature made Fri 08 May 2020 10:08:58 AM EEST using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
-
ChenTao authored
Fix the following warning: drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8225.c:609:17: warning: ‘rtl8225z2_tx_power_ofdm’ defined but not used static const u8 rtl8225z2_tx_power_ofdm[] = { Acked-by:Hin-Tak Leung <htl10@users.sourceforge.net> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
ChenTao <chentao107@huawei.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200513011754.28432-1-chentao107@huawei.com
-
Yan-Hsuan Chuang authored
sparse warnings: (new ones prefixed by >>) >> drivers/net/wireless/realtek/rtw88/rtw8723d.c:1899:6: sparse: sparse: symbol 'rtw8723d_pwr_track' was not declared. Should it be static? Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
Since 8723D code is ready, we can build it. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
8723D adds some experimental features to word 0x06 of cam entry, so fill zeros to initialize them to off state. For existing chips, these two words are reserved and always zeros, so this change is harmless for them. Signed-off-by:
-
Ping-Ke Shih authored
8723D is a Wifi+BT combo card. To make them work properly, we need coex mechanism to avoid interference, such as TX simultaneously. Basically, coex.c provide main algorithm to deal with many use cases, and this commit adds some parameters and ops differ from other chips, because coex hardware and WiFi generation are changed. Signed-off-by:
-
Ping-Ke Shih authored
Since 8723D use different address of ltecoex register, this commit add a new field in chip_info and fill proper address. Then, ltecoex_read_reg() and ltecoex_reg_write() can use them to access ltecoex according to chip. Signed-off-by:
-
Ping-Ke Shih authored
Flush queue is used to check if queue is empty, before doing something else. Since 8723D uses different registers and page number of availabl/reserved occupy 8 bits instead of 16 bits, so use a 'wsize' field to discriminate which rtw_read{8,16} is adopted. Signed-off-by: -
Ping-Ke Shih authored
Without this patch, wifi card can't initialize properly due to BT in USB suspend state. So, we disable BT USB suspend (wakeup) in shutdown callback that is the moment before rebooting. To save BT USB power, we can't do this in 'remove' callback. Signed-off-by:
-
Ping-Ke Shih authored
When chip's temperature is changed, RF characters are changed. To keep the characters to be consistent, 8723d uses thermal meter to assist in calibrating LCK, IQK, crystal and TX power. A base thermal value is programmed in efuse, all calibration data in MP process is based on this thermal value. So we calucate the delta of thermal value between the base value, and use this delta to reference XTAL and TX power offset tables to know how much we need to adjust. For IQK and LCK, driver checks if delta of thermal value is over 8, then they are triggered. For crystal adjustment, when delta of thermal value is changed, we check XTAL tables to get offset of XTAL value. If thermal value is larger than base value, positive table (_p as suffix) is used. Otherwise, we use negative table (_n as suffix). Then, we add offset to XTAL default value programmed in efuse, and write sum value to register. To compensate TX power, there are two hierarchical tables. First level use delta of thermal value to access eight tables to yield delta of TX power index. Then, plus base TX power index to get index of BB swing table (second level tables) where register value is induced. BB swing table can't deal with all cases, if index of BB swing table is over the size of the table. In this case, TX AGC is used to compensate the remnant part. Assume 'upper' is the upper bound of BB swing table, and 'target' is the desired index. Then, we can illustrate them as compensation method BB swing TX AGC ------------------- -------- -------------- target > upper upper target - upper target < 0 0 target otherwise target 0 For debug purpose, add a column 'rem' to tx_pwr_tbl entry, and it looks like path rate pwr base (byr lmt ) rem A CCK_1M 32(0x20) 34 -2 ( 0 -2) 0 Signed-off-by: -
Ping-Ke Shih authored
IQ calibration is used to calibrate RF characteristic to yield expected performance. Basically, we do calibration twice and compare the similarity to determine calibration is good or not, if not we do the third calibration, and then compare with the results of first and second calibration. If it still not similar, IQK is failed. Before doing calibration, we need to backup registers that will be modified in calibration procedure, and restore these registers after calibration is done. A calibration procedure can divided into four sub-procedures that are S1-TX, S1-RX, S0-TX and S0-RX. Where, S1 and S0 represent to path A and B respectively. Each sub-procedure configure proper registers, and then rigger one-shot calibration and poll until completion. For RX calibration, it needs to do twice one-shot calibration, first one is to yield parameter used by second one. The result of TX part is stored for TX power tracking that adjusts TX AGC to output expected power. Signed-off-by:
-
Ping-Ke Shih authored
LC calibration is done by hardware circuit. Driver sets the LCK bit to kick start, and then poll the bit to check if it's done. Signed-off-by:
-
Chung-Hsien Hsu authored
An incorrect value of use_fwsup is set for 4-way handshake offload for WPA//WPA2-PSK, caused by commit 3b1e0a7b ("brcmfmac: add support for SAE authentication offload"). It results in missing bit BRCMF_VIF_STATUS_EAP_SUCCESS set in brcmf_is_linkup() and causes the failure. This patch correct the value for the case. Also setting bit BRCMF_VIF_STATUS_EAP_SUCCESS for SAE offload case in brcmf_is_linkup() to fix SAE offload failure. Fixes: 3b1e0a7b ("brcmfmac: add support for SAE authentication offload") Signed-off-by:
Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by:
Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
-
- 12 May, 2020 20 commits
-
-
Ryder Lee authored
make mac_work per phy instead of per device and fix a possible deadlock in mt7915_stop since mt7915_mac_work runs holding mt76 mutex Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Allocating proper memory size according to tlv usage. Signed-off-by:
-
Ryder Lee authored
Add debug counters to track status of beamformer and beamformee. Signed-off-by:
-
Ryder Lee authored
This allows to set HE TxBF runtime stream capabilities Signed-off-by:
-
Ryder Lee authored
Enable beamformee support. Signed-off-by:
Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Enable TxBF modules and trigger sounding process to support Tx beamformer. Signed-off-by:
-
Ryder Lee authored
Add a helper to reduce duplicate codes. This is a preliminary patch to add Tx beamforming support. Signed-off-by:
-
Lorenzo Bianconi authored
Cancel possible power_save work before stopping the mt7663u interface Signed-off-by:
-
Lorenzo Bianconi authored
Add missing PLE/PSE base register definitions for mt7663u Signed-off-by:
-
Lorenzo Bianconi authored
Copy key pointer value before running mt76_tx_status_skb_add() in mt7663u_mac_write_txwi since it will be overwritten setting mt76_tx_cb for probing frames Co-developed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Ryder Lee authored
This patch can support concurrent dual-band operation. Signed-off-by:
-
Ryder Lee authored
This allows host driver to get useful information of some important modules. Signed-off-by:
Chih-Min Chen <chih-min.chen@mediatek.com> Signed-off-by:
-
Ryder Lee authored
It is useful for IBSS Mesh to adjust t_clockdrift. Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Tested-by:
-
Ryder Lee authored
Driver can manually set fixed rate for each peer through debugfs. May use .set_bitrate_mask callback and iterate stations under the current vif to achieve the aim once it supports HE rate. Signed-off-by:
-
Ryder Lee authored
Add useful debug counters since this generation uses struct rate_info to report HE tx rate. Signed-off-by:
-
Ryder Lee authored
This generation supports much more per-peer statistics than legacy ones, so add .sta_add_debugfs accordingly. This is convenient to set/get more settings/counters in the long run. Signed-off-by:
-
Ryder Lee authored
mac80211 expects the definition of what HE rate info is available inside astruct prepended to the skb. Signed-off-by:
-
Ryder Lee authored
Set peer's bsic HE capabilities through starec. Signed-off-by:
Shihwei Lin <shihwei.lin@mediatek.com> Tested-by:
Yiwei Chung <yiwei.chung@mediatek.com> Acked-by:
YF Luo <yf.luo@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Add basic HE BSS's info for interfaces. As for the advanced features will be added gradually in the future patches. (i.e. BSS color, TWT, spatial reuse and OFDMA) Signed-off-by:
-
Ryder Lee authored
The capabilities for the HE interfaces are generated from the capabilities reported by the firmware. This should move to common file once we got other HE devices support. Signed-off-by:
-
