Pull btrfs fixes from David Sterba:
 "A few more fixes:

   - regression fix for a crash after failed snapshot creation

   - one more lockep fix: use nofs allocation when allocating missing
     device

   - fix reloc tree leak on degraded mount

   - make some extent buffer alignment checks less strict to mount
     filesystems created by btrfs-convert"

* tag 'for-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix NULL pointer dereference after failure to create snapshot
  btrfs: free data reloc tree on failed mount
  btrfs: require only sector size alignment for parent eb bytenr
  btrfs: fix lockdep splat in add_missing_dev

Pull cifs fix from Steve French:
 "A fix for lookup on DFS link when cifsacl or modefromsid is used"

* tag '5.9-rc4-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix DFS mount with cifsacl/modefromsid

Pull ceph fix from Ilya Dryomov:
 "Add missing capability checks in rbd, marked for stable"

* tag 'ceph-for-5.9-rc5' of git://github.com/ceph/ceph-client:
  rbd: require global CAP_SYS_ADMIN for mapping and unmapping

Pull i2c updates from Wolfram Sang:
 "Usual driver bugfixes for the I2C subsystem"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: algo: pca: Reapply i2c bus settings after reset
  i2c: npcm7xx: Fix timeout calculation
  misc: eeprom: at24: register nvmem only after eeprom is ready to use

Pull power management fixes from Rafael Wysocki:
 "These fix three pieces of documentation and add new CPU IDs to the
  Intel RAPL power capping driver.

  Specifics:

   - Add CPU IDs of the TigerLake Desktop, RocketLake and AlderLake
     chips to the Intel RAPL power capping driver (Zhang Rui).

   - Add the missing energy model performance domain item to the struct
     device kerneldoc comment (Randy Dunlap).

   - Fix the struct powercap_control_type kerneldoc comment to match the
     actual definition of that structure and add missing item to the
     struct powercap_zone_ops kerneldoc comment (Amit Kucheria)"

* tag 'pm-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap: make documentation reflect code
  PM: <linux/device.h>: fix @em_pd kernel-doc warning
  powercap/intel_rapl: add support for AlderLake
  powercap/intel_rapl: add support for RocketLake
  powercap/intel_rapl: add support for TigerLake Desktop

Pull block fixes from Jens Axboe:

 - Fix a regression in bdev partition locking (Christoph)

 - NVMe pull request from Christoph:
      - cancel async events before freeing them (David Milburn)
      - revert a broken race fix (James Smart)
      - fix command processing during resets (Sagi Grimberg)

 - Fix a kyber crash with requeued flushes (Omar)

 - Fix __bio_try_merge_page() same_page error for no merging (Ritesh)

* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
  block: Set same_page to false in __bio_try_merge_page if ret is false
  nvme-fabrics: allow to queue requests for live queues
  block: only call sched requeue_request() for scheduled requests
  nvme-tcp: cancel async events before freeing event struct
  nvme-rdma: cancel async events before freeing event struct
  nvme-fc: cancel async events before freeing event struct
  nvme: Revert: Fix controller creation races with teardown flow
  block: restore a specific error code in bdev_del_partition

Pull spi fixes from Mark Brown:
 "There's some driver specific fixes here plus one core fix for memory
  leaks that could be triggered by a potential race condition when
  cleaning up after we have split transfers to fit into what the
  controller can support"

* tag 'spi-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: stm32: fix pm_runtime_get_sync() error checking
  spi: Fix memory leak on splited transfers
  spi: spi-cadence-quadspi: Fix mapping of buffers for DMA reads
  spi: stm32: Rate-limit the 'Communication suspended' message
  spi: spi-loopback-test: Fix out-of-bounds read
  spi: spi-cadence-quadspi: Populate get_name() interface
  MAINTAINERS: add myself as maintainer for spi-fsl-dspi driver

Merge tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "The biggest set of fixes here is those from Michał Mirosław fixing
  some locking issues with coupled regulators that are triggered in
  cases where a coupled regulator is used by a device involved in
  fs_reclaim like eMMC storage.

  These are relatively serious for the affected systems, though the
  circumstances where they trigger are very rare"

* tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: pwm: Fix machine constraints application
  regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive()
  regulator: remove superfluous lock in regulator_resolve_coupling()
  regulator: cleanup regulator_ena_gpio_free()
  regulator: plug of_node leak in regulator_register()'s error path
  regulator: push allocation in set_consumer_device_supply() out of lock
  regulator: push allocations in create_regulator() outside of lock
  regulator: push allocation in regulator_ena_gpio_request() out of lock
  regulator: push allocation in regulator_init_coupling() outside of lock
  regulator: fix spelling mistake "Cant" -> "Can't"
  regulator: cros-ec-regulator: Add NULL test for devm_kmemdup call

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - sdio: Restore ~20% performance drop for SDHCI drivers, by using
     mmc_pre_req() and mmc_post_req() for SDIO requests.

  MMC host:
   - sdhci-of-esdhc: Fix support for erratum eSDHC7
   - mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
   - sdhci-msm: Use retries to fix tuning
   - sdhci-acpi: Fix resume for eMMC HS400 mode"

* tag 'mmc-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdio: Use mmc_pre_req() / mmc_post_req()
  mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt
  mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
  mmc: sdhci-msm: Add retries when all tuning phases are found valid
  mmc: sdhci-acpi: Clear amd_sdhci_host on reset

Pull drm fixes from Dave Airlie:
 "Regular fixes, not much a major amount. One thing though is Laurent
  fixed some Kconfig issues, and I'm carrying the rapidio kconfig change
  so the drm one for xlnx driver works. He hadn't got a response from
  rapidio maintainers.

  Otherwise, virtio, sun4i, tve200, ingenic have some fixes, one audio
  fix for i915 and a core docs fix.

  kconfig:
   - rapidio/xlnx kconfig fix

  core:
   - Documentation fix

  i915:
   - audio regression fix

  virtio:
   - Fix double free in virtio
   - Fix virtio unblank
   - Remove output->enabled from virtio, as it should use crtc_state

  sun4i:
   - Add missing put_device in sun4i, and other fixes
   - Handle sun4i alpha on lowest plane correctly

  tv200:
   - Fix tve200 enable/disable

  ingenic
   - Small ingenic fixes"

* tag 'drm-fixes-2020-09-11' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: fix regression leading to display audio probe failure on GLK
  drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency
  rapidio: Replace 'select' DMAENGINES 'with depends on'
  drm/virtio: drop virtio_gpu_output->enabled
  drm/sun4i: backend: Disable alpha on the lowest plane on the A20
  drm/sun4i: backend: Support alpha property on lowest plane
  drm/sun4i: Fix DE2 YVU handling
  drm/tve200: Stabilize enable/disable
  dma-buf: fence-chain: Document missing dma_fence_chain_init() parameter in kerneldoc
  dma-buf: Fix kerneldoc of dma_buf_set_name()
  drm/virtio: fix unblank
  Documentation: fix dma-buf.rst underline length warning
  drm/sun4i: Fix dsi dcs long write function
  drm/ingenic: Fix driver not probing when IPU port is missing
  drm/ingenic: Fix leak of device_node pointer
  drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux()
  drm/virtio: Revert "drm/virtio: Call the right shmem helpers"

Pull rdma fixes from Jason Gunthorpe:
 "A number of driver bug fixes and a few recent regressions:

   - Several bug fixes for bnxt_re. Crashing, incorrect data reported,
     and corruption on new HW

   - Memory leak and crash in rxe

   - Fix sysfs corruption in rxe if the netdev name is too long

   - Fix a crash on error unwind in the new cq_pool code

   - Fix kobject panics in rtrs by working device lifetime properly

   - Fix a data corruption bug in iser target related to misaligned
     buffers"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/isert: Fix unaligned immediate-data handling
  RDMA/rtrs-srv: Set .release function for rtrs srv device during device init
  RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx'
  RDMA/core: Fix reported speed and width
  RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ
  RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds
  RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address
  RDMA/bnxt_re: Restrict the max_gids to 256
  RDMA/bnxt_re: Static NQ depth allocation
  RDMA/bnxt_re: Fix the qp table indexing
  RDMA/bnxt_re: Do not report transparent vlan from QP1
  RDMA/mlx4: Read pkey table length instead of hardcoded value
  RDMA/rxe: Fix panic when calling kmem_cache_create()
  RDMA/rxe: Fix memleak in rxe_mem_init_user
  RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars
  RDMA/rtrs-srv: Replace device_register with device_initialize and device_add

Using gcov to collect coverage data for kernels compiled with GCC 10.1
causes random malfunctions and kernel crashes.  This is the result of a
changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between
the layout of the gcov_info structure created by GCC profiling code and
the related structure used by the kernel.

Fix this by updating the in-kernel GCOV_COUNTERS value.  Also re-enable
config GCOV_KERNEL for use with GCC 10.
Reported-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Tested-and-Acked-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* powercap:
  powercap: make documentation reflect code
  powercap/intel_rapl: add support for AlderLake
  powercap/intel_rapl: add support for RocketLake
  powercap/intel_rapl: add support for TigerLake Desktop

drm-misc-fixes for v5.9-rc5:
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl

Merge tag 'drm-intel-fixes-2020-09-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.9-rc5:
- Fix regression leading to audio probe failure
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875z8m2hss.fsf@intel.com

Pull f2fs fixes from Jaegeuk Kim:
 "Small bug fixes for:

   - SMR drive fix

   - infinite loop when building free node ids

   - EOF at DIO read"

* tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: Return EOF on unaligned end of file DIO read
  f2fs: fix indefinite loop scanning for free nid
  f2fs: Fix type of section block count variables

Fix up the documentation of the struct powercap_control_type members
to match the code.

Also fixup stray whitespace.
Signed-off-by: Amit Kucheria <amitk@kernel.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix kernel-doc warning in <linux/device.h>:

../include/linux/device.h:613: warning: Function parameter or member 'em_pd' not described in 'device'

Fixes: 1bc138c6 ("PM / EM: add support for other devices than CPUs in Energy Model")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add intel_rapl support for the AlderLake platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add intel_rapl support for the RocketLake platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add intel_rapl support for the TigerLake desktop platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull NVMe fixes from Christoph.

"nvme fixes for 5.9

 - cancel async events before freeing them (David Milburn)
 - revert a broken race fix (James Smart)
 - fix command processing during resets (Sagi Grimberg)"

* tag 'nvme-5.9-2020-09-10' of git://git.infradead.org/nvme:
  nvme-fabrics: allow to queue requests for live queues
  nvme-tcp: cancel async events before freeing event struct
  nvme-rdma: cancel async events before freeing event struct
  nvme-fc: cancel async events before freeing event struct
  nvme: Revert: Fix controller creation races with teardown flow

Pull crypto fix from Herbert Xu:
 "This fixes a regression in padata"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  padata: fix possible padata_works_lock deadlock

Pull NFS client bugfixes from Trond Myklebust:

 - Fix an NFS/RDMA resource leak

 - Fix the error handling during delegation recall

 - NFSv4.0 needs to return the delegation on a zero-stateid SETATTR

 - Stop printk reading past end of string

* tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: stop printk reading past end of string
  NFS: Zero-stateid SETATTR should first return delegation
  NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
  xprtrdma: Release in-flight MRs on disconnect

Currently we allocate rx buffers in a single contiguous buffers for
headers (iser and iscsi) and data trailer. This means that most likely the
data starting offset is aligned to 76 bytes (size of both headers).

This worked fine for years, but at some point this broke, resulting in
data corruptions in isert when a command comes with immediate data and the
underlying backend device assumes 512 bytes buffer alignment.

We assume a hard-requirement for all direct I/O buffers to be 512 bytes
aligned. To fix this, we should avoid passing unaligned buffers for I/O.

Instead, we allocate our recv buffers with some extra space such that we
can have the data portion align to 512 byte boundary. This also means that
we cannot reference headers or data using structure but rather
accessors (as they may move based on alignment). Also, get rid of the
wrong __packed annotation from iser_rx_desc as this has only harmful
effects (not aligned to anything).

This affects the rx descriptors for iscsi login and data plane.

Fixes: 3d75ca0a ("block: introduce multi-page bvec helpers")
Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.meReported-by: Stephen Rust <srust@blockbridge.com>
Tested-by: Doug Dumitru <doug@dumitru.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The device .release function was not being set during the device
initialization. This was leading to the below warning, in error cases when
put_srv was called before device_add was called.

Warning:

Device '(null)' does not have a release() function, it is broken and must
be fixed. See Documentation/kobject.txt.

So, set the device .release function during device initialization in the
__alloc_srv() function.

Fixes: baa5b28b ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add")
Link: https://lore.kernel.org/r/20200907102216.104041-1-haris.iqbal@cloud.ionos.comSigned-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

drivers/infiniband/hw/bnxt_re/main.c:1012:25:
 warning: variable ‘qplib_ctx’ set but not used [-Wunused-but-set-variable]

Fixes: f86b31c6 ("RDMA/bnxt_re: Static NQ depth allocation")
Link: https://lore.kernel.org/r/20200905121624.32776-1-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway
not merging this page in this bio, then it make sense to make same_page
also as false before returning.

Without this patch, we hit below WARNING in iomap.
This mostly happens with very large memory system and / or after tweaking
vm dirty threshold params to delay writeback of dirty data.

WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150
 CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G        W         5.8.0-rc3 #6
 Call Trace:
  __remove_mapping+0x154/0x320 (unreliable)
  iomap_releasepage+0x80/0x180
  try_to_release_page+0x94/0xe0
  invalidate_inode_page+0xc8/0x110
  invalidate_mapping_pages+0x1dc/0x540
  generic_fadvise+0x3c8/0x450
  xfs_file_fadvise+0x2c/0xe0 [xfs]
  vfs_fadvise+0x3c/0x60
  ksys_fadvise64_64+0x68/0xe0
  sys_fadvise64+0x28/0x40
  system_call_exception+0xf8/0x1c0
  system_call_common+0xf0/0x278

Fixes: cc90bc68 ("block: fix "check bi_size overflow before merge"")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The pm_runtime_get_sync() can return either 0 or 1 on success but this
code treats 1 as a failure.

Fixes: db96bf97 ("spi: stm32: fixes suspend/resume management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/20200909094304.GA420136@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

In the prepare_message callback the bus driver has the
opportunity to split a transfer into smaller chunks.
spi_map_msg is done after prepare_message.

Function spi_res_release releases the splited transfers
in the message. Therefore spi_res_release should be called
after spi_map_msg.

The previous try at this was commit c9ba7a16
which released the splited transfers after
spi_finalize_current_message had been called.
This introduced a race since the message struct could be
out of scope because the spi_sync call got completed.

Fixes this leak on spi bus driver spi-bcm2835.c when transfer
size is greater than 65532:

Kmemleak:
sg_alloc_table+0x28/0xc8
spi_map_buf+0xa4/0x300
__spi_pump_messages+0x370/0x748
__spi_sync+0x1d4/0x270
spi_sync+0x34/0x58
spi_test_execute_msg+0x60/0x340 [spi_loopback_test]
spi_test_run_iter+0x548/0x578 [spi_loopback_test]
spi_test_run_test+0x94/0x140 [spi_loopback_test]
spi_test_run_tests+0x150/0x180 [spi_loopback_test]
spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test]
spi_drv_probe+0x84/0xe0
Signed-off-by: Gustav Wiklander <gustavwi@axis.com>
Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.comSigned-off-by: Mark Brown <broonie@kernel.org>

If something goes wrong (such as the SCL being stuck low) then we need
to reset the PCA chip. The issue with this is that on reset we lose all
config settings and the chip ends up in a disabled state which results
in a lock up/high CPU usage. We need to re-apply any configuration that
had previously been set and re-enable the chip.
Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'at24-fixes-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current

at24 fixes for v5.9-rc5

- delay registration of the nvmem provider until after power is enabled

Right now we are failing requests based on the controller state (which
is checked inline in nvmf_check_ready) however we should definitely
accept requests if the queue is live.

When entering controller reset, we transition the controller into
NVME_CTRL_RESETTING, and then return BLK_STS_RESOURCE for non-mpath
requests (have blk_noretry_request set).

This is also the case for NVME_REQ_USER for the wrong reason. There
shouldn't be any reason for us to reject this I/O in a controller reset.
We do want to prevent passthru commands on the admin queue because we
need the controller to fully initialize first before we let user passthru
admin commands to be issued.

In a non-mpath setup, this means that the requests will simply be
requeued over and over forever not allowing the q_usage_counter to drop
its final reference, causing controller reset to hang if running
concurrently with heavy I/O.

Fixes: 35897b92 ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready")
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Reading past end of file returns EOF for aligned reads but -EINVAL for
unaligned reads on f2fs.  While documentation is not strict about this
corner case, most filesystem returns EOF on this case, like iomap
filesystems.  This patch consolidates the behavior for f2fs, by making
it return EOF(0).

it can be verified by a read loop on a file that does a partial read
before EOF (A file that doesn't end at an aligned address).  The
following code fails on an unaligned file on f2fs, but not on
btrfs, ext4, and xfs.

  while (done < total) {
    ssize_t delta = pread(fd, buf + done, total - done, off + done);
    if (!delta)
      break;
    ...
  }

It is arguable whether filesystems should actually return EOF or
-EINVAL, but since iomap filesystems support it, and so does the
original DIO code, it seems reasonable to consolidate on that.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

If the sbi->ckpt->next_free_nid is not NAT block aligned and if there
are free nids in that NAT block between the start of the block and
next_free_nid, then those free nids will not be scanned in scan_nat_page().
This results into mismatch between nm_i->available_nids and the sum of
nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids
will always be greater than the sum of free nids in all the blocks.
Under this condition, if we use all the currently scanned free nids,
then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids
is still not zero but nm_i->free_nid_count of that partially scanned
NAT block is zero.

Fix this to align the nm_i->next_scan_nid to the first nid of the
corresponding NAT block.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Commit da52f8ad ("f2fs: get the right gc victim section when section
has several segments") added code to count blocks of each section using
variables with type 'unsigned short', which has 2 bytes size in many
systems. However, the counts can be larger than the 2 bytes range and
type conversion results in wrong values. Especially when the f2fs
sections have blocks as many as USHRT_MAX + 1, the count is handled as 0.
This triggers eternal loop in init_dirty_segmap() at mount system call.
Fix this by changing the type of the variables to block_t.

Fixes: da52f8ad ("f2fs: get the right gc victim section when section has several segments")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Kconfig fixes for DRM_ZYNQMP_DPSUB DMA engine dependency
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200905172751.GC6319@pendragon.ideasonboard.com

Yang Yang reported the following crash caused by requeueing a flush
request in Kyber:

  [    2.517297] Unable to handle kernel paging request at virtual address ffffffd8071c0b00
  ...
  [    2.517468] pc : clear_bit+0x18/0x2c
  [    2.517502] lr : sbitmap_queue_clear+0x40/0x228
  [    2.517503] sp : ffffff800832bc60 pstate : 00c00145
  ...
  [    2.517599] Process ksoftirqd/5 (pid: 51, stack limit = 0xffffff8008328000)
  [    2.517602] Call trace:
  [    2.517606]  clear_bit+0x18/0x2c
  [    2.517619]  kyber_finish_request+0x74/0x80
  [    2.517627]  blk_mq_requeue_request+0x3c/0xc0
  [    2.517637]  __scsi_queue_insert+0x11c/0x148
  [    2.517640]  scsi_softirq_done+0x114/0x130
  [    2.517643]  blk_done_softirq+0x7c/0xb0
  [    2.517651]  __do_softirq+0x208/0x3bc
  [    2.517657]  run_ksoftirqd+0x34/0x60
  [    2.517663]  smpboot_thread_fn+0x1c4/0x2c0
  [    2.517667]  kthread+0x110/0x120
  [    2.517669]  ret_from_fork+0x10/0x18

This happens because Kyber doesn't track flush requests, so
kyber_finish_request() reads a garbage domain token. Only call the
scheduler's requeue_request() hook if RQF_ELVPRIV is set (like we do for
the finish_request() hook in blk_mq_free_request()). Now that we're
handling it in blk-mq, also remove the check from BFQ.
Reported-by: Yang Yang <yang.yang@vivo.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'linux-kselftest-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "A single fix to timers test to disable timeout setting for tests to
  run and report accurate results"

* tag 'linux-kselftest-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/timers: Turn off timeout setting

Pull SCSI fixes from James Bottomley:
 "Eleven fixes, mostly in drivers or minor fixes in driver related
  infrastructure libraries (target, libfc and libsas).

  Most of the bugs fixed only show up under rare circumstances, the
  exception being the endianness problem in qla2xxx which is used as a
  device on some sparc systems"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Don't call disable_irq from IRQ poll handler
  scsi: megaraid_sas: Don't call disable_irq from process IRQ poll
  scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
  scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
  scsi: target: iscsi: Fix data digest calculation
  scsi: lpfc: Update lpfc version to 12.8.0.4
  scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events
  scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
  scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask
  scsi: qla2xxx: Fix regression on sparc64
  scsi: libfc: Fix for double free()
  scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort