* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (33 commits)
  drm/radeon/kms: fix typo in radeon_compute_pll_gain
  drm/radeon/kms: try to detect tv vs monitor for underscan
  drm/radeon/kms: fix sideport detection on newer rs880 boards
  drm/radeon: fix passing wrong type to gem object create.
  drm/radeon/kms: set encoder type to DVI for HDMI on evergreen
  drm/radeon/kms: add back missing break in info ioctl
  drm/radeon/kms: don't enable MSIs on AGP boards
  drm/radeon/kms: fix agp mode setup on cards that use pcie bridges
  drm: move dereference below check
  drm: fix end of loop test
  drm/radeon/kms: rework radeon_dp_detect() logic
  drm/radeon/kms: add missing asic callback assignment for evergreen
  drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2c
  drm/radeon/kms/pm: bail early if nothing's changing
  drm/radeon/kms/atom: clean up dig atom handling
  drm/radeon/kms: DCE3/4 transmitter fixes
  drm/radeon/kms: rework encoder handling
  drm/radeon/kms: DCE3/4 AdjustPixelPll updates
  drm/radeon: Fix stack data leak
  drm/radeon/kms: fix GTT/VRAM overlapping test
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: wire up new fanotify/prlimit64 syscalls
  ADI/ASoC: add MAINTAINERS entries
  Blackfin: fix hweight breakage

dev_name always dereferences its argument, so it should not be called if
the argument is NULL.  The function indeed later tests the argument for
being NULL.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

  // <smpl>
  @@
  expression dev,E;
  @@

  *dev_name(dev)
  ... when != dev = E
  (
  *dev == NULL
  |
  *dev != NULL
  )
  // </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'misc' of git://git.kernel.dk/linux-2.6-block:
  ipheth: add support for iPhone 4

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: i.MX ssi: use SSI_STCCR in synchronous mode
  ALSA: hda - Add support for Lenovo S10-3t
  ALSA: hda - Fix stream and channel-ids codec-bus wide
  ALSA: hda - Fix conflict of sticky PCM parameter in HDMI codecs
  ALSA: intel8x0: Mute External Amplifier by default for ThinkPad X31
  ALSA: hda - Fix build error with CONFIG_PROC_FS=n
  ALSA: hda - Add support for IDT 92HD89XX codecs

In synchronous mode the SSI_SRCCR values are ignored. Instead
SSI_STCCR must be used for both receiving and transmitting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

This adds support for the iPhone 4 to the ipheth driver.
Acked-by: Diego Giagio <diego@giagio.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The recent commit to add constant optimization to hweight implicitly broke
the Blackfin arch.  Seems we were missed when all the other arches were
fixed with renames.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This patch adds quirk for the Lenovo S10-3t so the headphone &
microphone jacks will now work.
Signed-off-by: Jerone Young <jerone.young@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'radix-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tags
  radix-tree: clear all tags in radix_tree_node_rcu_free

Commit ebf8aa44 ("radix-tree:
omplement function radix_tree_range_tag_if_tagged") does not safely
set tags on on intermediate tree nodes. The code walks down the tree
setting tags before it has fully resolved the path to the leaf under
the assumption there will be a leaf slot with the tag set in the
range it is searching.

Unfortunately, this is not a valid assumption - we can abort after
setting a tag on an intermediate node if we overrun the number of
tags we are allowed to set in a batch, or stop scanning because we
we have passed the last scan index before we reach a leaf slot with
the tag we are searching for set.

As a result, we can leave the function with tags set on intemediate
nodes which can be tripped over later by tag-based lookups. The
result of these stale tags is that lookup may end prematurely or
livelock because the lookup cannot make progress.

The fix for the problem involves reocrding the traversal path we
take to the leaf nodes, and only propagating the tags back up the
tree once the tag is set in the leaf node slot. We are already
recording the path for efficient traversal, so there is no
additional overhead to do the intermediately node tag setting in
this manner.

This fixes a radix tree lookup livelock triggered by the new
writeback sync livelock avoidance code introduced in commit
f446daae ("mm: implement writeback
livelock avoidance using page tagging").
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>

Commit f446daae ("mm: implement
writeback livelock avoidance using page tagging") introduced a new
radix tree tag, increasing the number of tags in each node from 2 to
3. It did not, however, fix up the code in
radix_tree_node_rcu_free() that cleans up after radix_tree_shrink()
and hence could leave stray tags set in the new tag array.

The result is that the livelock avoidance code added in the the
above commit would hit stale tags when doing tag based lookups,
resulting in livelocks when trying to traverse the tree.

Fix this problem in radix_tree_node_rcu_free() so it doesn't happen
again in the future by using a loop to walk all the tags up to
RADIX_TREE_MAX_TAGS to clear the stray tags radix_tree_shrink()
leaves behind.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>
Acked-by: Jan Kara <jack@suse.cz>

* 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next:
  drm/nouveau: fix earlier mistake when fixing merge conflict
  drm/nvc0: fix thinko in instmem suspend/resume
  drm/nouveau: Workaround missing GPIO tables on an Apple iMac G4 NV18.
  drm/nouveau: Add TV-out quirk for an MSI nForce2 IGP.
  drm/nv50-nvc0: ramht_size is meant to be in bytes, not entries
  drm/nouveau: punt some more log messages to debug level
  drm/nouveau: remove warning about unknown tmds table revisions
  drm/nouveau: check for error when allocating/mapping dummy page
  drm/nouveau: fix race condition when under memory pressure
  drm/nv50: fix minor thinko from nvc0 changes
  drm/nouveau: Don't try DDC on the dummy I2C channel.

Looks like this got copied from the ddx wrong.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

When enabling underscan for hdmi monitors, attempt to detect
whether we are driving a TV or a monitor.  The should hopefully
prevent underscan from being enabled on monitors attached via
hdmi that do not overscan the image.  Only enable underscan
if the mode is a common hdtv mode (480p, 720p, etc.).
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The meaning of ucMemoryType changed on recent boards, however,
ulBootUpSidePortClock should be set properly across all boards.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

We are passing a ttm type when we want to pass true/false.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PIT: free irq source id in handling error path
  KVM: destroy workqueue on kvm_create_pit() failures
  KVM: fix poison overwritten caused by using wrong xstate size

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (58 commits)
  drm/i915,intel_agp: Add support for Sandybridge D0
  drm/i915: fix render pipe control notify on sandybridge
  agp/intel: set 40-bit dma mask on Sandybridge
  drm/i915: Remove the conflicting BUG_ON()
  drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/
  drm/i915/suspend: Flush register writes before busy-waiting.
  i915: disable DAC on Ironlake also when doing CRT load detection.
  drm/i915: wait for actual vblank, not just 20ms
  drm/i915: make sure eDP PLL is enabled at the right time
  drm/i915: fix VGA plane disable for Ironlake+
  drm/i915: eDP mode set sequence corrections
  drm/i915: add panel reset workaround
  drm/i915: Enable RC6 on Ironlake.
  drm/i915/sdvo: Only set is_lvds if we have a valid fixed mode.
  drm/i915: Set up a render context on Ironlake
  drm/i915 invalidate indirect state pointers at end of ring exec
  drm/i915: Wake-up wait_request() from elapsed hang-check (v2)
  drm/i915: Apply i830 errata for cursor alignment
  drm/i915: Only update i845/i865 CURBASE when disabled (v2)
  drm/i915: FBC is updated within set_base() so remove second call in mode_set()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix object alignment
  slub: add missing __percpu markup in mm/slub_def.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: wait for discard to finish

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

This one is missed in last pipe control fix for sandybridge,
that really unmask interrupt bit for notify in render engine IMR.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

We now attempt to free "active" objects following a GPU hang as either
the GPU will be reset or the hang is permenant. In either case, the GPU
writes will not be flushed to main memory and it should be safe to
return that memory back to the system.

The BUG_ON(active) is thus overkill and can erroneously fire after a
EIO.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

For the shared paths on the next generation chipsets.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Like on Sandybridge, disabling the DAC here when doing CRT load detect
avoids forever hangs waiting on the hardware.

test procedure on HP 2740p:
boot with no VGA plugged in, start X,
plug in VGA monitor (1280x1024)
chvt 3
machine hangs waiting forever.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Waiting for a hard coded 20ms isn't always enough to make sure a vblank
period has actually occurred, so add code to make sure we really have
passed through a vblank period (or that the pipe is off when disabling).

This prevents problems with mode setting and link training, and seems to
fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but
on an HP 8440p instead.  Hopefully also fixes
https://bugs.freedesktop.org/show_bug.cgi?id=29141.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/mtd-2.6:
  mtd: nand: Fix probe of Samsung NAND chips
  mtd: nand: Fix regression in BBM detection
  pxa3xx: fix ns2cycle equation

The "Configure" word tends to make user believe they have to say 'yes'
to be able to choose the number of procs/nodes.  "Enable" should be
unambiguous enough.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Like the mlock() change previously, this makes the stack guard check
code use vma->vm_prev to see what the mapping below the current stack
is, rather than have to look it up with find_vma().

Also, accept an abutting stack segment, since that happens naturally if
you split the stack with mlock or mprotect.
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If we've split the stack vma, only the lowest one has the guard page.
Now that we have a doubly linked list of vma's, checking this is trivial.
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's a really simple list, and several of the users want to go backwards
in it to find the previous vma.  So rather than have to look up the
previous entry with 'find_vma_prev()' or something similar, just make it
doubly linked instead.
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>