* acpi-soc:
  ACPI / APD: Add device HID for future AMD UART controller

* acpi-misc:
  ACPI / util: cast data to u64 before shifting to fix sign extension

* acpi-pci:
  PCI: ACPI: IA64: fix IO port generic range check

* device-properties:
  ACPI / property: fix data node parsing in acpi_get_next_subnode()

* pm-avs:
  PM / AVS: rockchip-io: add io selectors and supplies for rk3399

* pm-clk:
  PM / clk: Add support for obtaining clocks from device-tree

* pm-devfreq:
  PM / devfreq: Spelling s/frequnecy/frequency/

* pm-sleep:
  ACPI / PM: Runtime resume devices when waking from hibernate
  PM / sleep: Clear pm_suspend_global_flags upon hibernate

* pm-cpufreq:
  cpufreq: governor: Always schedule work on the CPU running update
  cpufreq: Always update current frequency before startig governor
  cpufreq: Introduce cpufreq_update_current_freq()
  cpufreq: Introduce cpufreq_start_governor()
  cpufreq: powernv: Add sysfs attributes to show throttle stats
  cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static
  cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path
  cpufreq: acpi-cpufreq: Clean up hot plug notifier callback
  intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts
  cpufreq: Make cpufreq_quick_get() safe to call

* pm-cpuidle:
  intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
  intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
  cpuidle: menu: Fall back to polling if next timer event is near
  cpuidle: menu: use high confidence factors only when considering polling

Pull intel_idle patches for 4.6 from Len Brown.

* 'cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
  intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled

This adds the necessary data for handling io voltage domains on the rk3399.
As interesting tidbit, the rk3399 contains two separate iodomain areas.
One in the regular General Register Files (GRF) and one in PMUGRF in the
pmu power domain.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Enables "Intel(R) Xeon Phi(TM) Processor x200 Product Family" support,
formerly code-named KNL. It is based on modified Intel Atom Silvermont
microarchitecture.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
[micah.barany@intel.com: adjusted values of residency and latency]
Signed-off-by: Micah Barany <micah.barany@intel.com>
[hubert.chrzaniuk@intel.com: removed deprecated CPUIDLE_FLAG_TIME_VALID flag]
Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: Pawel Karczewski <pawel.karczewski@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Some SKL-H configurations require "intel_idle.max_cstate=7" to boot.
While that is an effective workaround, it disables C10.

This patch detects the problematic configuration,
and disables C8 and C9, keeping C10 enabled.

Note that enabling SGX in BIOS SETUP can also prevent this issue,
if the system BIOS provides that option.

https://bugzilla.kernel.org/show_bug.cgi?id=109081
"Freezes with Intel i7 6700HQ (Skylake), unless intel_idle.max_cstate=7"
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org

Commit 58a1fbbb ("PM / PCI / ACPI: Kick devices that might have been
reset by firmware") added a runtime resume for devices that were runtime
suspended when the system entered suspend-to-RAM.

Briefly, the motivation was to ensure that devices did not remain in a
reset-power-on state after resume, potentially preventing deep SoC-wide
low-power states from being entered on idle.

Currently we're not doing the same when leaving suspend-to-disk and this
asymmetry is a problem if drivers rely on the automatic resume triggered
by pm_complete_with_resume_check(). Fix it.

Fixes: 58a1fbbb (PM / PCI / ACPI: Kick devices that might have been reset by firmware)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When suspending to RAM, waking up and later suspending to disk,
we gratuitously runtime resume devices after the thaw phase.
This does not occur if we always suspend to RAM or always to disk.

pm_complete_with_resume_check(), which gets called from
pci_pm_complete() among others, schedules a runtime resume
if PM_SUSPEND_FLAG_FW_RESUME is set. The flag is set during
a suspend-to-RAM cycle. It is cleared at the beginning of
the suspend-to-RAM cycle but not afterwards and it is not
cleared during a suspend-to-disk cycle at all. Fix it.

Fixes: ef25ba04 (PM / sleep: Add flags to indicate platform firmware involvement)
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Modify dbs_irq_work() to always schedule the process-context work
on the current CPU which also ran the dbs_update_util_handler()
that the irq_work being handled came from.

This causes the entire frequency update handling (involving the
"ondemand" or "conservative" governors) to be carried out by the
CPU whose frequency is to be updated and reduces the overall amount
of inter-CPU noise related to cpufreq.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Make policy->cur match the current frequency returned by the driver's
->get() callback before starting the governor in case they went out of
sync in the meantime and drop the piece of code attempting to
resync policy->cur with the real frequency of the boot CPU from
cpufreq_resume() as it serves no purpose any more (and it's racy and
super-ugly anyway).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Move the part of cpufreq_update_policy() that obtains the current
frequency from the driver and updates policy->cur if necessary to
a separate function, cpufreq_get_current_freq().

That should not introduce functional changes and subsequent change
set will need it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Starting a governor in cpufreq always follows the same pattern
involving two calls to cpufreq_governor(), one with the event
argument set to CPUFREQ_GOV_START and one with that argument set to
CPUFREQ_GOV_LIMITS.

Introduce cpufreq_start_governor() that will carry out those two
operations and make all places where governors are started use it.

That slightly modifies the behavior of cpufreq_set_policy() which
now also will go back to the old governor if the second call to
cpufreq_governor() (the one with event equal to CPUFREQ_GOV_LIMITS)
fails, but that really is how it should work in the first place.

Also cpufreq_resume() will now pring an error message if the
CPUFREQ_GOV_LIMITS call to cpufreq_governor() fails, but that
makes it follow cpufreq_add_policy_cpu() and cpufreq_offline()
in that respect.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

Create sysfs attributes to export throttle information in
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory. The
newly added sysfs files are as follows:

 1)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat
 2)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub-turbo_stat
 3)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/unthrottle
 4)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/powercap
 5)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overtemp
 6)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/supply_fault
 7)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overcurrent
 8)/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset

Detailed explanation of each attribute is added to
Documentation/ABI/testing/sysfs-devices-system-cpu
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

These frequency register read/write operations' implementations for the
given processor (Intel/AMD MSR access or I/O port access) are only used
internally in acpi-cpufreq, so make them static.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The [0 - 64k] ACPI PCI IO port resource boundary check in:

acpi_dev_ioresource_flags()

is currently applied blindly in the ACPI resource parsing to all
architectures, but only x86 suffers from that IO space limitation.

On arches (ie IA64 and ARM64) where IO space is memory mapped,
the PCI root bridges IO resource windows are firstly initialized from
the _CRS (in acpi_decode_space()) and contain the CPU physical address
at which a root bridge decodes IO space in the CPU physical address
space with the offset value representing the offset required to translate
the PCI bus address into the CPU physical address.

The IO resource windows are then parsed and updated in arch code
before creating and enumerating PCI buses (eg IA64 add_io_space())
to map in an arch specific way the obtained CPU physical address range
to a slice of virtual address space reserved to map PCI IO space,
ending up with PCI bridges resource windows containing IO
resources like the following on a working IA64 configuration:

PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x1000000-0x100ffff window] (bus
address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
pci_bus 0000:00: root bus resource [bus 00]

This implies that the [0 - 64K] check in acpi_dev_ioresource_flags()
leaves platforms with memory mapped IO space (ie IA64) broken (ie kernel
can't claim IO resources since the host bridge IO resource is disabled
and discarded by ACPI core code, see log on IA64 with missing root bridge
IO resource, silently filtered by current [0 - 64k] check in
acpi_dev_ioresource_flags()):

PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
pci_bus 0000:00: root bus resource [bus 00]

[...]

pci 0000:00:03.0: [1002:515e] type 00 class 0x030000
pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref]
pci 0000:00:03.0: reg 0x14: [io  0x1000-0x10ff]
pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff]
pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: can't claim BAR 1 [io  0x1000-0x10ff]: no compatible
bridge window

For this reason, the IO port resources boundaries check in generic ACPI
parsing code should be guarded with a CONFIG_X86 guard so that more arches
(ie ARM64) can benefit from the generic ACPI resources parsing interface
without incurring in unexpected resource filtering, fixing at the same
time current breakage on IA64.

This patch factors out IO ports boundary [0 - 64k] check in generic ACPI
code and makes the IO space check X86 specific to make sure that IO
space resources are usable on other arches too.

Fixes: 3772aea7 (ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge)
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

obj->buffer.pointer[i] should be cast to u64 to prevent an unintentional
sign extension.  For example, if pointer[7] is 0x80, then the value
0xffffffffff000000 is or'd into mask rather than the intended value
0xff00000000000000

Detected with static analysis by CoverityScan
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 96c4726f "cpufreq: powernv: Remove cpu_to_chip_id() from
hot-path" introduced a 'core_to_chip_map' array to cache the chip-ids
of all cores.

Replace this with a per-CPU variable that stores the pointer to the
chip-array. This removes the linear lookup and provides a neater and
simpler solution.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit a9ceb78b (cpuidle,menu: use interactivity_req to disable
polling) changed the behavior of the fallback state selection part
of menu_select() so it looks at interactivity_req instead of
data->next_timer_us when it makes its decision.  That effectively
caused polling to be used more often as fallback idle which led to
significant increases of energy consumption in some cases.

Commit e132b9b3 (cpuidle: menu: use high confidence factors
only when considering polling) changed that logic again to be more
predictable, but that didn't help with the increased energy
consumption problem.

For this reason, go back to making decisions on which state to fall
back to based on data->next_timer_us which is the time we know for
sure something will happen rather than a prediction (which may be
inaccurate and turns out to be so often enough to be problematic).
However, take the target residency of the first proper idle state
(C1) into account, so that state is not used as the fallback one
if its target residency is greater than data->next_timer_us.

Fixes: a9ceb78b (cpuidle,menu: use interactivity_req to disable polling)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-and-tested-by: Doug Smythies <dsmythies@telus.net>

This driver has two issues.  First, it tries to fiddle with the hot
plugged CPU's MSR on the UP_PREPARE event, at a time when the CPU is
not yet online.  Second, the driver sets the "boost-disable" bit for a
CPU when going down, but does not clear the bit again if the CPU comes
up again due to DOWN_FAILED.

This patch fixes the issues by changing the driver to react to the
ONLINE/DOWN_FAILED events instead of UP_PREPARE.  As an added benefit,
the driver also becomes symmetric with respect to the hot plug
mechanism.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

After commit a4675fbc (cpufreq: intel_pstate: Replace timers with
utilization update callbacks) wrmsrl_on_cpu() cannot be called in the
intel_pstate_adjust_busy_pstate() path as that is executed with
disabled interrupts.  However, atom_set_pstate() called from there
via intel_pstate_set_pstate() uses wrmsrl_on_cpu() to update the
IA32_PERF_CTL MSR which triggers the WARN_ON_ONCE() in
smp_call_function_single().

The reason why wrmsrl_on_cpu() is used by atom_set_pstate() is
because intel_pstate_set_pstate() calling it is also invoked during
the initialization and cleanup of the driver and in those cases it is
not guaranteed to be run on the CPU that is being updated.  However,
in the case when intel_pstate_set_pstate() is called by
intel_pstate_adjust_busy_pstate(), wrmsrl() can be used to update
the register safely.  Moreover, intel_pstate_set_pstate() already
contains code that only is executed if the function is called by
intel_pstate_adjust_busy_pstate() and there is a special argument
passed to it because of that.

To fix the problem at hand, rearrange the code taking the above
observations into account.

First, replace the ->set() callback in struct pstate_funcs with a
->get_val() one that will return the value to be written to the
IA32_PERF_CTL MSR without updating the register.

Second, split intel_pstate_set_pstate() into two functions,
intel_pstate_update_pstate() to be called by
intel_pstate_adjust_busy_pstate() that will contain all of the
intel_pstate_set_pstate() code which only needs to be executed in
that case and will use wrmsrl() to update the MSR (after obtaining
the value to write to it from the ->get_val() callback), and
intel_pstate_set_min_pstate() to be invoked during the
initialization and cleanup that will set the P-state to the
minimum one and will update the MSR using wrmsrl_on_cpu().

Finally, move the code shared between intel_pstate_update_pstate()
and intel_pstate_set_min_pstate() to a new static inline function
intel_pstate_record_pstate() and make them both call it.

Of course, that unifies the handling of the IA32_PERF_CTL MSR writes
between Atom and Core.

Fixes: a4675fbc (cpufreq: intel_pstate: Replace timers with utilization update callbacks)
Reported-and-tested-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The function, cpufreq_quick_get, accesses the global 'cpufreq_driver' and
its fields without taking the associated lock, cpufreq_driver_lock.

Without the locking, nothing guarantees that 'cpufreq_driver' remains
consistent during the call.  This patch fixes the issue by taking the lock
before accessing the data structure.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When an ACPI node has both ACPI device nodes and ACPI data nodes,
acpi_get_next_subnode() will return the ACPI data nodes of its last
parsed child.

To avoid that, make acpi_get_next_subnode() go back to the original
ACPI device object when all of the device node children of it have
been found already.
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add device HID AMDI0020 to match the AMD ACPI Vendor ID (AMDI) as
registered in http://www.uefi.org/acpi_id_list, and the UART
controller on future AMD paltform will use the HID instead of AMD0020.
Signed-off-by: Wang Hongcheng <annie.wang@amd.com>
Acked-by: Ken Xue <Ken.Xue@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The menu governor uses five different factors to pick the
idle state:
 - the user configured latency_req
 - the time until the next timer (next_timer_us)
 - the typical sleep interval, as measured recently
 - an estimate of sleep time by dividing next_timer_us by an observed factor
 - a load corrected version of the above, divided again by load

Only the first three items are known with enough confidence that
we can use them to consider polling, instead of an actual CPU
idle state, because the cost of being wrong about polling can be
excessive power use.

The latter two are used in the menu governor's main selection
loop, and can result in choosing a shallower idle state when
the system is expected to be busy again soon.

This pushes a busy system in the "performance" direction of
the performance<>power tradeoff, when choosing between idle
states, but stays more strictly on the "power" state when
deciding between polling and C1.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The PM clocks framework requires clients to pass either a con-id or a
valid clk pointer in order to add a clock to a device. Add a new
function of_pm_clk_add_clks() to allows device clocks to be retrieved
from device-tree and populated for a given device. Note that it is
not necessary to make the compilation of this new function dependent
upon CONFIG_OF because there are stubs functions for the device-tree
APIs used.

In order to handle errors encountered when adding clocks from
device-tree, add a function pm_clk_remove_clk() to remove any clocks
(using a pointer to the clk structure) that have been added
successfully before the error occurred.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the majority of changes go into cpufreq and they are
  significant.

  First off, the way CPU frequency updates are triggered is different
  now.  Instead of having to set up and manage a deferrable timer for
  each CPU in the system to evaluate and possibly change its frequency
  periodically, cpufreq governors set up callbacks to be invoked by the
  scheduler on a regular basis (basically on utilization updates).  The
  "old" governors, "ondemand" and "conservative", still do all of their
  work in process context (although that is triggered by the scheduler
  now), but intel_pstate does it all in the callback invoked by the
  scheduler with no need for any additional asynchronous processing.

  Of course, this eliminates the overhead related to the management of
  all those timers, but also it allows the cpufreq governor code to be
  simplified quite a bit.  On top of that, the common code and data
  structures used by the "ondemand" and "conservative" governors are
  cleaned up and made more straightforward and some long-standing and
  quite annoying problems are addressed.  In particular, the handling of
  governor sysfs attributes is modified and the related locking becomes
  more fine grained which allows some concurrency problems to be avoided
  (particularly deadlocks with the core cpufreq code).

  In principle, the new mechanism for triggering frequency updates
  allows utilization information to be passed from the scheduler to
  cpufreq.  Although the current code doesn't make use of it, in the
  works is a new cpufreq governor that will make decisions based on the
  scheduler's utilization data.  That should allow the scheduler and
  cpufreq to work more closely together in the long run.

  In addition to the core and governor changes, cpufreq drivers are
  updated too.  Fixes and optimizations go into intel_pstate, the
  cpufreq-dt driver is updated on top of some modification in the
  Operating Performance Points (OPP) framework and there are fixes and
  other updates in the powernv cpufreq driver.

  Apart from the cpufreq updates there is some new ACPICA material,
  including a fix for a problem introduced by previous ACPICA updates,
  and some less significant changes in the ACPI code, like CPPC code
  optimizations, ACPI processor driver cleanups and support for loading
  ACPI tables from initrd.

  Also updated are the generic power domains framework, the Intel RAPL
  power capping driver and the turbostat utility and we have a bunch of
  traditional assorted fixes and cleanups.

  Specifics:

   - Redesign of cpufreq governors and the intel_pstate driver to make
     them use callbacks invoked by the scheduler to trigger CPU
     frequency evaluation instead of using per-CPU deferrable timers for
     that purpose (Rafael Wysocki).

   - Reorganization and cleanup of cpufreq governor code to make it more
     straightforward and fix some concurrency problems in it (Rafael
     Wysocki, Viresh Kumar).

   - Cleanup and improvements of locking in the cpufreq core (Viresh
     Kumar).

   - Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
     Kumar, Eric Biggers).

   - intel_pstate driver updates including fixes, optimizations and a
     modification to make it enable enable hardware-coordinated P-state
     selection (HWP) by default if supported by the processor (Philippe
     Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
     Franciosi).

   - Operating Performance Points (OPP) framework updates to improve its
     handling of voltage regulators and device clocks and updates of the
     cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).

   - Updates of the powernv cpufreq driver to fix initialization and
     cleanup problems in it and correct its worker thread handling with
     respect to CPU offline, new powernv_throttle tracepoint (Shilpasri
     Bhat).

   - ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).

   - ACPICA updates including one fix for a regression introduced by
     previos changes in the ACPICA code (Bob Moore, Lv Zheng, David Box,
     Colin Ian King).

   - Support for installing ACPI tables from initrd (Lv Zheng).

   - Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
     Chaugule).

   - Support for _HID(ACPI0010) devices (ACPI processor containers) and
     ACPI processor driver cleanups (Sudeep Holla).

   - Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
     Aleksey Makarov).

   - Modification of the ACPI PCI IRQ management code to make it treat
     255 in the Interrupt Line register as "not connected" on x86 (as
     per the specification) and avoid attempts to use that value as a
     valid interrupt vector (Chen Fan).

   - ACPI APEI fixes related to resource leaks (Josh Hunt).

   - Removal of modularity from a few ACPI drivers (BGRT, GHES,
     intel_pmic_crc) that cannot be built as modules in practice (Paul
     Gortmaker).

   - PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
     as a valid resource type (Harb Abdulhamid).

   - New device ID (future AMD I2C controller) in the ACPI driver for
     AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).

   - Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).

   - cpuidle menu governor optimization to avoid a square root
     computation in it (Rasmus Villemoes).

   - Fix for potential use-after-free in the generic device properties
     framework (Heikki Krogerus).

   - Updates of the generic power domains (genpd) framework including
     support for multiple power states of a domain, fixes and debugfs
     output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
     Geert Uytterhoeven).

   - Intel RAPL power capping driver updates to reduce IPI overhead in
     it (Jacob Pan).

   - System suspend/hibernation code cleanups (Eric Biggers, Saurabh
     Sengar).

   - Year 2038 fix for the process freezer (Abhilash Jindal).

   - turbostat utility updates including new features (decoding of more
     registers and CPUID fields, sub-second intervals support, GFX MHz
     and RC6 printout, --out command line option), fixes (syscall jitter
     detection and workaround, reductioin of the number of syscalls
     made, fixes related to Xeon x200 processors, compiler warning
     fixes) and cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu)"

* tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (182 commits)
  tools/power turbostat: bugfix: TDP MSRs print bits fixing
  tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump
  tools/power turbostat: call __cpuid() instead of __get_cpuid()
  tools/power turbostat: indicate SMX and SGX support
  tools/power turbostat: detect and work around syscall jitter
  tools/power turbostat: show GFX%rc6
  tools/power turbostat: show GFXMHz
  tools/power turbostat: show IRQs per CPU
  tools/power turbostat: make fewer systems calls
  tools/power turbostat: fix compiler warnings
  tools/power turbostat: add --out option for saving output in a file
  tools/power turbostat: re-name "%Busy" field to "Busy%"
  tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding
  tools/power turbostat: Intel Xeon x200: fix erroneous bclk value
  tools/power turbostat: allow sub-sec intervals
  ACPI / APEI: ERST: Fixed leaked resources in erst_init
  ACPI / APEI: Fix leaked resources
  intel_pstate: Do not skip samples partially
  intel_pstate: Remove freq calculation from intel_pstate_calc_busy()
  intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance()
  ...

Merge first patch-bomb from Andrew Morton:

 - some misc things

 - ofs2 updates

 - about half of MM

 - checkpatch updates

 - autofs4 update

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
  autofs4: fix string.h include in auto_dev-ioctl.h
  autofs4: use pr_xxx() macros directly for logging
  autofs4: change log print macros to not insert newline
  autofs4: make autofs log prints consistent
  autofs4: fix some white space errors
  autofs4: fix invalid ioctl return in autofs4_root_ioctl_unlocked()
  autofs4: fix coding style line length in autofs4_wait()
  autofs4: fix coding style problem in autofs4_get_set_timeout()
  autofs4: coding style fixes
  autofs: show pipe inode in mount options
  kallsyms: add support for relative offsets in kallsyms address table
  kallsyms: don't overload absolute symbol type for percpu symbols
  x86: kallsyms: disable absolute percpu symbols on !SMP
  checkpatch: fix another left brace warning
  checkpatch: improve UNSPECIFIED_INT test for bare signed/unsigned uses
  checkpatch: warn on bare unsigned or signed declarations without int
  checkpatch: exclude asm volatile from complex macro check
  mm: memcontrol: drop unnecessary lru locking from mem_cgroup_migrate()
  mm: migrate: consolidate mem_cgroup_migrate() calls
  mm/compaction: speed up pageblock_pfn_to_page() when zone is contiguous
  ...

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix misspellings in comments.
  m68k: Use conventional function parameters for do_sigreturn
  zorro: Use kobj_to_dev()

Pull s390 updates from Martin Schwidefsky:

 - Add the CPU id for the new z13s machine

 - Add a s390 specific XOR template for RAID-5 checksumming based on the
   XC instruction.  Remove all other alternatives, XC is always faster

 - The merge of our four different stack tracers into a single one

 - Tidy up the code related to page tables, several large inline
   functions are now out-of-line.  Bloat-o-meter reports ~11K text size
   reduction

 - A binary interface for the priviledged CLP instruction to retrieve
   the hardware view of the installed PCI functions

 - Improvements for the dasd format code

 - Bug fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
  s390/pci: enforce fmb page boundary rule
  s390: fix floating pointer register corruption (again)
  s390/cpumf: add missing lpp magic initialization
  s390: Fix misspellings in comments
  s390/mm: split arch/s390/mm/pgtable.c
  s390/mm: uninline pmdp_xxx functions from pgtable.h
  s390/mm: uninline ptep_xxx functions from pgtable.h
  s390/pci: add ioctl interface for CLP
  s390: Use pr_warn instead of pr_warning
  s390/dasd: remove casts to dasd_*_private
  s390/dasd: Refactor dasd format functions
  s390/dasd: Simplify code in format logic
  s390/dasd: Improve dasd format code
  s390/percpu: remove this_cpu_cmpxchg_double_4
  s390/cpumf: Improve guest detection heuristics
  s390/fault: merge report_user_fault implementations
  s390/dis: use correct escape sequence for '%' character
  s390/kvm: simplify set_guest_storage_key
  s390/oprofile: add z13/z13s model numbers
  s390: add z13s model number to z13 elf platform
  ...

Pull AVR32 updates from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: fix asm operand constraint in cmpxchg()
  avr32: wire up copy_file_range syscall

Pull KVM updates from Paolo Bonzini:
 "One of the largest releases for KVM...  Hardly any generic
  changes, but lots of architecture-specific updates.

  ARM:
   - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
   - PMU support for guests
   - 32bit world switch rewritten in C
   - various optimizations to the vgic save/restore code.

  PPC:
   - enabled KVM-VFIO integration ("VFIO device")
   - optimizations to speed up IPIs between vcpus
   - in-kernel handling of IOMMU hypercalls
   - support for dynamic DMA windows (DDW).

  s390:
   - provide the floating point registers via sync regs;
   - separated instruction vs.  data accesses
   - dirty log improvements for huge guests
   - bugfixes and documentation improvements.

  x86:
   - Hyper-V VMBus hypercall userspace exit
   - alternative implementation of lowest-priority interrupts using
     vector hashing (for better VT-d posted interrupt support)
   - fixed guest debugging with nested virtualizations
   - improved interrupt tracking in the in-kernel IOAPIC
   - generic infrastructure for tracking writes to guest
     memory - currently its only use is to speedup the legacy shadow
     paging (pre-EPT) case, but in the future it will be used for
     virtual GPUs as well
   - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits)
  KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
  KVM: x86: disable MPX if host did not enable MPX XSAVE features
  arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit
  arm64: KVM: vgic-v3: Reset LRs at boot time
  arm64: KVM: vgic-v3: Do not save an LR known to be empty
  arm64: KVM: vgic-v3: Save maintenance interrupt state only if required
  arm64: KVM: vgic-v3: Avoid accessing ICH registers
  KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit
  KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit
  KVM: arm/arm64: vgic-v2: Reset LRs at boot time
  KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty
  KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function
  KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required
  KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers
  KVM: s390: allocate only one DMA page per VM
  KVM: s390: enable STFLE interpretation only if enabled for the guest
  KVM: s390: wake up when the VCPU cpu timer expires
  KVM: s390: step the VCPU timer while in enabled wait
  KVM: s390: protect VCPU cpu timer with a seqcount
  KVM: s390: step VCPU cpu timer during kvm_run ioctl
  ...

Pull EDAC updates from Borislav Petkov:

 - Altera: L2 cache and On-Chip RAM support (Thor Thayer).

 - EDAC: Workqueue handling cleanups (Borislav Petkov).

 - Xgene: Register bus error handling (Loc Ho).

 - Misc small fixes.

* tag 'edac_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  ARM: socfpga: Enable OCRAM ECC on startup
  ARM: socfpga: Enable L2 cache ECC on startup
  ARM: dts: Add Altera L2 Cache and OCRAM EDAC entries
  EDAC, altera: Add Altera L2 cache and OCRAM support
  EDAC: Use edac_debugfs_remove_recursive() in edac_debugfs_exit()
  EDAC, mpc85xx: Silence unused variable warning
  EDAC: Cleanup/sync workqueue functions
  EDAC: Kill workqueue setup/teardown functions
  EDAC: Balance workqueue setup and teardown
  arm64: Update the APM X-Gene EDAC node with the RB register resource
  EDAC, xgene: Add missing SoC register bus error handling
  Documentation, EDAC: Update xgene binding for missing register bus
  EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()

Pull LED updates from Jacek Anaszewski:
 "LED core improvements:
   - Fix misleading comment after workqueue removal from drivers
   - Avoid error message when a USB LED device is unplugged
   - Add helpers for calling brightness_set(_blocking)

  LED triggers:
   - Simplify led_trigger_store by using sysfs_streq()

  LED class drivers improvements:
   - Improve wording and formatting in a comment: lp3944
   - Fix return value check in create_gpio_led(): leds-gpio
   - Use GPIOF_OUT_INIT_LOW instead of hardcoded zero: leds-gpio
   - Use devm_led_classdev_register(): leds-lm3533, leds-lm3533,
     leds-lp8788, leds-wm831x-status, leds-s3c24xx, leds-s3c24xx,
     leds-max8997.

  New LED class driver:
   - Add driver for the ISSI IS31FL32xx family of LED controllers.

  Device Tree documentation:
   - of: Add vendor prefixes for Integrated Silicon Solutions Inc.
     (issi) and Si-En Technology (si-en).
   - DT: Add common bindings for Si-En Technology SN3216/18 and
     IS31FL32xx family of LED controllers, since they seem to be the
     same hardware, just rebranded"

* tag 'leds_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: triggers: simplify led_trigger_store
  leds: max8997: Use devm_led_classdev_register
  leds: da903x: Use devm_led_classdev_register
  leds: s3c24xx: Use devm_led_classdev_register
  leds: wm831x-status: Use devm_led_classdev_register
  leds: lp8788: Use devm_led_classdev_register
  leds: 88pm860x: Use devm_led_classdev_register
  leds: Add SN3218 and SN3216 support to the IS31FL32XX driver
  of: Add vendor prefix for Si-En Technology
  leds: Add driver for the ISSI IS31FL32xx family of LED controllers
  DT: leds: Add binding for the ISSI IS31FL32xx family of LED controllers
  DT: Add vendor prefix for Integrated Silicon Solutions Inc.
  leds: lm3533: Use devm_led_classdev_register
  leds: gpio: Use GPIOF_OUT_INIT_LOW instead of hardcoded zero
  leds: core: add helpers for calling brightness_set(_blocking)
  leds: leds-gpio: Fix return value check in create_gpio_led()
  leds: lp3944: improve wording and formatting in a comment
  leds: core: avoid error message when a USB LED device is unplugged
  leds: core: fix misleading comment after workqueue removal from drivers

Pull RTC updates from Alexandre Belloni:
 "Core:
   - New sysfs interface to set and read clock offset
   - Drivers can now be both I2C and SPI (see pcf2127 and ds3232)

  New drivers:
   - Alphascale ASM9260
   - Epson RX6110SA
   - Maxim max20024 and max77620 (in max77686)
   - Microchip PIC32
   - NXP pcf2129 (in pcf2127)

  Subsystem wide cleanups:
   - remove IRQF_EARLY_RESUME when unecessary

  Drivers:
   - ds1307: clock output, temperature sensor and wakeup-source support
   - ds1685: actually spin forever in poweroff error path
   - ds3232: many cleanups
   - ds3234: merged in ds3232
   - hym8563: fix invalid year calculation
   - max77686: many cleanups
   - max77802 merged in max77686
   - pcf2123: cleanups and offset support
   - pcf85063: cleanups
   - pcf8523: propely handle oscillator stop bit
   - rv3029: many cleanups, trickle charger and temperature sensor support
   - rv8803: convert spin_lock to mutex_lock
   - rx8025: many fixes
   - vr41xx: restore alarm_irq_enable"

* tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits)
  rtc: pcf2127: add pcf2129 device id
  rtc: pcf2127: add support for spi interface
  rtc: pcf2127: convert to use regmap
  rtc: rv3029: Add thermometer hwmon support
  rtc: rv3029: Add update_bits helper for eeprom access
  rtc: ds1685: actually spin forever in poweroff error path
  rtc: hym8563: fix invalid year calculation
  rtc: ds3232: use rtc->ops_lock to protect alarm operations
  rtc: ds3232: fix issue when irq is shared several devices
  rtc: ds3232: remove unused UIE code
  rtc: ds3232: add register access error checks
  rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON
  rtc: merge ds3232 and ds3234
  rtc: ds3232: convert to use regmap
  rtc: pxa: fix Kconfig indentation
  rtc: rv3029: Add device tree property for trickle charger
  rtc: rv3029: Add functions for EEPROM access
  rtc: rv3029: Add i2c register update-bits helper
  rtc: rv3029: Add missing register definitions
  rtc: rv3029: Add "rv3029" I2C device id
  ...

Merge tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - New drivers for NSA320 and LTC2990
 - Added support for ADM1278 to adm1275 driver
 - Added support for ncpXXxh103 to ntc_thermistor driver
 - Renamed vexpress hwmon implementation
 - Minor cleanups and improvements

* tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: Create an NSA320 hardware monitoring driver
  hwmon: Define binding for the nsa320-hwmon driver
  hwmon: (adm1275) Add support for ADM1278
  hwmon: (ntc_thermistor) Add support for ncpXXxh103
  Doc: hwmon: Fix typo "montoring" in hwmon
  ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel
  ARM: dts: Change iio_hwmon nodes to use hypen in node names
  hwmon: (iio_hwmon) Allow the driver to accept hypen in device tree node names
  hwmon: Add LTC2990 sensor driver
  hwmon: (vexpress) rename vexpress hwmon implementation

Pull regulator updates from Mark Brown:
 "This has been an extremely quiet release for the regulator API, aside
  from bugfixes and small enhancements the only thing that really stands
  out are the new drivers for Action Semiconductors ACT8945A, HiSilicon
  HI665x, and the Maxim MAX20024 and MAX77620"

* tag 'regulator-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (46 commits)
  regulator: pwm: Add support to have multiple instance of pwm regulator
  regulator: pwm: Fix calculation of voltage-to-duty cycle
  regulator: of: Use of_property_read_u32() for reading min/max
  regulator: pv88060: fix incorrect clear of event register
  regulator: pv88090: fix incorrect clear of event register
  regulator: max77620: Add support to configure active-discharge
  regulator: core: Add support for active-discharge configuration
  regulator: helper: Add helper to configure active-discharge using regmap
  regulator: core: Add support for active-discharge configuration
  regulator: DT: Add DT property for active-discharge configuration
  regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9
  regulator: act8865: Rename platform_data field to init_data
  regulator: act8865: Remove "static" from local variable
  ASoC: cs4271: add regulator consumer support
  regulator: max77620: Remove duplicate module alias
  regulator: max77620: Eliminate duplicate code
  regulator: max77620: Remove unused fields
  regulator: core: fix crash in error path of regulator_register
  regulator: core: Request GPIO before creating sysfs entries
  regulator: gpio: don't print error on EPROBE_DEFER
  ...

Pull regmap updates from Mark Brown:
 "This has been a very busy release for regmap, not just in cleaning up
  the mess we got ourselves into with the endianness handling but also
  in other areas too:

   - Fixes for the endianness handling so that we now explicitly default
     to little endian (the code used to do this by accident).  This
     fixes handling of explictly specified endianness on big endian
     systems.

   - Optimisation of the implementation of register striding.

   - A refectoring of the _update_bits() code to reduce duplication.

   - Fixes and enhancements for the interrupt implementation which make
     it easier to use in a wider range of systems"

* tag 'regmap-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (28 commits)
  regmap: irq: add devm apis for regmap_{add,del}_irq_chip
  regmap: replace regmap_write_bits()
  regmap: irq: Enable irq retriggering for nested irqs
  regmap: add regmap_fields_force_xxx() macros
  regmap: add regmap_field_force_xxx() macros
  regmap: merge regmap_fields_update_bits() into macro
  regmap: merge regmap_fields_write() into macro
  regmap: add regmap_fields_update_bits_base()
  regmap: merge regmap_field_update_bits() into macro
  regmap: merge regmap_field_write() into macro
  regmap: add regmap_field_update_bits_base()
  regmap: merge regmap_update_bits_check_async() into macro
  regmap: merge regmap_update_bits_check() into macro
  regmap: merge regmap_update_bits_async() into macro
  regmap: merge regmap_update_bits() into macro
  regmap: add regmap_update_bits_base()
  regcache: flat: Introduce register strider order
  regcache: Introduce the index parsing API by stride order
  regmap: core: Introduce register stride order
  regmap: irq: add devm apis for regmap_{add,del}_irq_chip
  ...

Pull spi updates from Mark Brown:
 "Not the biggest set of changes for SPI but a bit of a pickup in
  activity on the core:

   - Support for memory mapped read from flash devices via a SPI
     controller.

   - The beginnings of a message rewriting framework in the core which
     should in time allow us to support transforming messages to work
     around the limits of controllers or optimise the performance for
     controllers transparently to calling drivers.

   - Updates to the PXA2xx, the main functional change being to improve
     the ACPI support.

   - A new driver for the Analog Devices AXI SPI engine"

* tag 'spi-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: Add gfp parameter to kernel-doc to fix build warning
  spi: Fix htmldocs build error due struct spi_replaced_transfers
  spi: rockchip: covert rsd_nsecs to u32 type
  spi: rockchip: header file cleanup
  spi: xilinx: Add devicetree binding for spi-xilinx
  spi: respect the maximum segment size of DMA device
  spi: rockchip: check requesting dma channel with EPROBE_DEFER
  spi: rockchip: migrate to dmaengine_terminate_async
  spi: rockchip: check return value of dmaengine_prep_slave_sg
  spi: core: Fix deadlock when sending messages
  spi/rockchip: fix endian mode for 16-bit transfers
  spi/rockchip: Make sure spi clk is on in rockchip_spi_set_cs
  spi: pxa2xx: Use newer more explicit DMAengine terminate API
  spi: pxa2xx: Add support for Intel Broxton B-Step
  spi: lp-8841: return correct error code from probe
  spi: imx: drop bogus tests for rx/tx bufs in DMA transfer
  spi: imx: set MX51_ECSPI_CTRL_SMC bit in setup function
  spi: imx: make some register defines simpler
  spi: imx: remove unnecessary bit clearing in mx51_ecspi_config
  spi: imx: add support for all SPI word width for DMA
  ...