- 01 Feb, 2008 40 commits
-
-
Chuck Lever authored
Clean up: file name lengths are unsigned on the wire, negative lengths are not meaningful natively either. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Acked-By:
NeilBrown <neilb@suse.de> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu>
-
Chuck Lever authored
According to The Open Group's NLM specification, NLM callers are variable length strings. XDR variable length strings use an unsigned 32 bit length. And internally, negative string lengths are not meaningful for the Linux NLM implementation. Clean up: Make nlm_lock.len and nlm_reboot.len unsigned integers. This makes the sign of NLM string lengths consistent with the sign of xdr_netobj lengths. Signed-off-by:
-
Chuck Lever authored
XDR strings, opaques, and net objects should all use unsigned lengths. To wit, RFC 4506 says: 4.2. Unsigned Integer An XDR unsigned integer is a 32-bit datum that encodes a non-negative integer in the range [0,4294967295]. ... 4.11. String The standard defines a string of n (numbered 0 through n-1) ASCII bytes to be the number n encoded as an unsigned integer (as described above), and followed by the n bytes of the string. After this patch, xdr_decode_string_inplace now matches the other XDR string and array helpers that take a string length argument. See: xdr_encode_opaque_fixed, xdr_encode_opaque, xdr_encode_array Signed-off-by:
-
Chuck Lever authored
Make sure we compare an unsigned length to an unsigned count in read_flush(). Signed-off-by:
-
J. Bruce Fields authored
Obviously at some point we thought "error" represented the length when positive. This appears to be a long-standing typo. Thanks to Prasad Potluri <pvp@us.ibm.com> for finding the problem and proposing an earlier version of this patch. Cc: Steve French <smfltc@us.ibm.com> Cc: Prasad V Potluri <pvp@us.ibm.com> Signed-off-by: -
Prasad P authored
Dereferenced pointer "dentry" without checking and assigned to inode in the declaration. (We could just delete the NULL checks that follow instead, as we never get to the encode function in this particular case. But it takes a little detective work to verify that fact, so it's probably safer to leave the checks in place.) Cc: Steve French <smfltc@us.ibm.com> Signed-off-by:
Prasad V Potluri <pvp@us.ibm.com> Signed-off-by:
-
J. Bruce Fields authored
The whole reason to move this callback-channel probe into a separate thread was because (for now) we don't have an easy way to create the rpc_client asynchronously. But I forgot to move the rpc_create() to the spawned thread. Doh! Fix that. Signed-off-by: -
J. Bruce Fields authored
Our callback code doesn't actually handle concurrent attempts to probe the callback channel. Some rethinking of the locking may be required. However, we can also just move the callback probing to this case. Since this is the only time a client is "confirmed" (and since that can only happen once in the lifetime of a client), this ensures we only probe once. Signed-off-by: -
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: kill swap_io_context() as-iosched: fix inconsistent ioc->lock context ide-cd: fix leftover data BUG block: make elevator lib checkpatch compliant cfq-iosched: make checkpatch compliant block: make core bits checkpatch compliant block: new end request handling interface should take unsigned byte counts unexport add_disk_randomness block/sunvdc.c:print_version() must be __devinit splice: always updated atime in direct splice
-
Jens Axboe authored
It blindly copies everything in the io_context, including the lock. That doesn't work so well for either lock ordering or lockdep. There seems zero point in swapping io contexts on a request to request merge, so the best point of action is to just remove it. Signed-off-by:Jens Axboe <jens.axboe@oracle.com>
-
Randy Dunlap authored
Fix docbook fatal error (files were renamed): docproc: linux-2.6.24-git9/arch/ppc/kernel/rio.c: No such file or directory Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt authored
Doing a make randconfig I came across this error in the Makefile. This patch makes a directory out of arch/x86/mach-default for CONFIG_X86_RDC321X Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix inconsistent .section usage in lib/ [SPARC/SPARC64]: Fix usage of .section .sched.text in assembler code.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (173 commits) [NETNS]: Lookup in FIB semantic hashes taking into account the namespace. [NETNS]: Add a namespace mark to fib_info. [IPV4]: fib_sync_down rework. [NETNS]: Process interface address manipulation routines in the namespace. [IPV4]: Small style cleanup of the error path in rtm_to_ifaddr. [IPV4]: Fix memory leak on error path during FIB initialization. [NETFILTER]: Ipv6-related xt_hashlimit compilation fix. [NET_SCHED]: Add flow classifier [NET_SCHED]: sch_sfq: make internal queues visible as classes [NET_SCHED]: sch_sfq: add support for external classifiers [NET_SCHED]: Constify struct tcf_ext_map [BLUETOOTH]: Fix bugs in previous conn add/del workqueue changes. [TCP]: Unexport sysctl_tcp_tso_win_divisor [IPV4]: Make struct ipv4_devconf static. [TR] net/802/tr.c: sysctl_tr_rif_timeout static [XFRM]: Fix statistics. [XFRM]: Remove unused exports. [PKT_SCHED] sch_teql.c: Duplicate IFF_BROADCAST in FMASK, remove 2nd. [BNX2]: Fix ASYM PAUSE advertisement for remote PHY. [IPV4] route cache: Introduce rt_genid for smooth cache invalidation ...
-
Olof Johansson authored
[POWERPC] pasemi: Fix thinko in dma_direct_ops setup The first patch will just fall through and still set dma_data to a bad value, make it return directly instead. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Greg Ungerer authored
Remove all the dead timer interrupt checking functions for the ColdFire CPU "timers" hardware that are not used after switching to GENERIC_TIME. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
Switching to GENERIC_TIME means we no longer need the empty timer offset function for the 68360 CPU. Signed-off-by:
-
Greg Ungerer authored
Remove unused local gettimeofday functions, now that we are using GENERIC_TIME. Signed-off-by:
-
Greg Ungerer authored
Switch m68knommu arch to using GENERIC_TIME. Signed-off-by:
-
Greg Ungerer authored
Switch the ColdFire TIMER timer to use GENERIC_TIME. Signed-off-by:
-
Greg Ungerer authored
Switch the ColdFire PIT timer to using GENERIC_TIME. Signed-off-by:
-
Greg Ungerer authored
Switch the 68328 CPU timer code to using GENERIC_TIME. Signed-off-by:
-
Greg Ungerer authored
Remove unused CONFIG_DISKtel define. Signed-off-by:
-
Greg Ungerer authored
Fix problems with the 528x ColdFire CPU cache setup. Do not cache the flash region (if present), and make the runtime settings consistent with the init setting. Problems pointed out by Bernd Buttner <b.buettner@mkc-gmbh.de> Signed-off-by:
-
Greg Ungerer authored
Use container_of() instead of assuming local uart struct is first member of uart_port struct. Signed-off-by:
-
Greg Ungerer authored
Remove unused LED heartbeat code from m68knommu timer code. Signed-off-by:
-
Greg Ungerer authored
Use IRQF_DISABLED instead of obsolete IRQ_FLG_STD for request_irq() flags in m68328serial.c driver. Signed-off-by:
-
Greg Ungerer authored
Move the ColdFire DMA address table into its own file, and out of each of the different CPU config files. No need to have a copy of it in each of the config setup files. Signed-off-by:
-
Greg Ungerer authored
Modify Makefiles to support separate coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by:
-
Greg Ungerer authored
Move common ColdFire CPU vectors.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by:
-
Greg Ungerer authored
Move common ColdFire CPU timers.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by:
-
Greg Ungerer authored
Move common ColdFire CPU pit.c to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by:
-
Greg Ungerer authored
Move common ColdFire CPU head.S to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by:
-
Greg Ungerer authored
Move common ColdFire CPU entry.S to common coldfire platform directory. Currently the common ColdFire CPU family code sits in the arch/m68knommu/platform/5307 directory. This is confusing, the files containing this common code are in no way specific to the 5307 ColdFire. Create an arch/m68knommu/platform/coldfire directory to contain this common code. Other m68knommu CPU varients do not need use this code though, so it doesn't make sense to move it to arch/m68knommu/kernel. Signed-off-by:
-
Greg Ungerer authored
Switch to platform style configuration for 5407 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by:
-
Greg Ungerer authored
Switch to platform style configuration for 532x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by:
-
Greg Ungerer authored
Switch to platform style configuration for 527x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by:
-
Greg Ungerer authored
Switch to platform style configuration for 5307 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by:
-
Greg Ungerer authored
Switch to platform style configuration for 528x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by:
-
Greg Ungerer authored
Switch to platform style configuration for 5249 ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by:
-
