- 16 Mar, 2017 5 commits
-
-
Alexander Shishkin authored
Since commit: 1c5ac21a ("perf/x86/intel/pt: Don't die on VMXON") ... PT events depend on re-scheduling to get enabled after a VMX session has taken place. This is, in particular, a problem for CPU context events, which don't normally get re-scheduled, unless there is a reason. This patch changes the VMX handling so that PT event gets re-enabled when VMX root mode exits. Also, notify the user when there's a gap in PT data due to VMX root mode by flagging AUX records as partial. In combination with vmm_exclusive=0 parameter of the kvm_intel driver, this will result in trace gaps only for the duration of the guest's timeslices. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20170220133352.17995-5-alexander.shishkin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Alexander Shishkin authored
The Intel PT driver needs to be able to communicate partial AUX transactions, that is, transactions with gaps in data for reasons other than no room left in the buffer (i.e. truncated transactions). Therefore, this condition does not imply a wakeup for the consumer. To this end, add a new "partial" AUX flag. Signed-off-by:
-
Will Deacon authored
In preparation for adding more flags to perf AUX records, introduce a separate API for setting the flags for a session, rather than appending more bool arguments to perf_aux_output_end. This allows to set each flag at the time a corresponding condition is detected, instead of tracking it in each driver's private state. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Kan Liang authored
Goldmont supports full Top Down level 1 metrics (FrontendBound, Retiring, Backend Bound and Bad Speculation). It has 3 wide pipeline. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 15 Mar, 2017 7 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Four small fixes for this cycle: - followup fix from Neil for a fix that went in before -rc2, ensuring that we always see the full per-task bio_list. - fix for blk-mq-sched from me that ensures that we retain similar direct-to-issue behavior on running the queue. - fix from Sagi fixing a potential NULL pointer dereference in blk-mq on spurious CPU unplug. - a memory leak fix in writeback from Tahsin, fixing a case where device removal of a mounted device can leak a struct wb_writeback_work" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq-sched: don't run the queue async from blk_mq_try_issue_directly() writeback: fix memory leak in wb_queue_work() blk-mq: Fix tagset reinit in the presence of cpu hot-unplug blk: Ensure users for current->bio_list can see the full list. -
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.12-20170314' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: New features: - Add PERF_RECORD_NAMESPACES so that the kernel can record information required to associate samples to namespaces, helping in container problem characterization. Now the 'perf record has a --namespace' option to ask for such info, and when present, it can be used, initially, via a new sort order, 'cgroup_id', allowing histogram entry bucketization by a (device, inode) based cgroup identifier (Hari Bathini) - Add --next option to 'perf sched timehist', showing what is the next thread to run (Brendan Gregg) Fixes: - Fix segfault with basic block 'cycles' sort dimension (Changbin Du) - Add c2c to command-list.txt, making it appear in the 'perf help' output (Changbin Du) - Fix zeroing of 'abs_path' variable in the perf hists browser switch file code (Changbin Du) - Hide tips messages when -q/--quiet is given to 'perf report' (Namhyung Kim) Infrastructure changes: - Use ref_reloc_sym + offset to setup kretprobes (Naveen Rao) - Ignore generated files pmu-events/{jevents,pmu-events.c} for git (Changbin Du) Documentation changes: - Document +field style argument support for --field option (Changbin Du) - Clarify 'perf c2c --stats' help message (Namhyung Kim) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a rather large set of fixes. The bulk are for lpfc correcting a lot of issues in the new NVME driver code which just went in in the merge window. The others are: - fix a hang in the vmware paravirt driver caused by incorrect handling of the new MSI vector allocation - long standing bug in storvsc, which recent block changes turned from being a harmless annoyance into a hang - yet more fallout (in mpt3sas) from the changes to device blocking The remainder are small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits) scsi: lpfc: Add shutdown method for kexec scsi: storvsc: Workaround for virtual DVD SCSI version scsi: lpfc: revise version number to 11.2.0.10 scsi: lpfc: code cleanups in NVME initiator discovery scsi: lpfc: code cleanups in NVME initiator base scsi: lpfc: correct rdp diag portnames scsi: lpfc: remove dead sli3 nvme code scsi: lpfc: correct double print scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT scsi: lpfc: Rework lpfc Kconfig for NVME options scsi: lpfc: add transport eh_timed_out reference scsi: lpfc: Fix eh_deadline setting for sli3 adapters. scsi: lpfc: add NVME exchange aborts scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport scsi: lpfc: Fix IO submission if WQ is full scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem scsi: lpfc: Fix RCTL value on NVME LS request and response scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters scsi: lpfc: fix missing spin_unlock on sql_list_lock scsi: lpfc: don't dereference dma_buf->iocbq before null check ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Bob Peterson: "This is an emergency patch for 4.11-rc3 The GFS2 developers uncovered a really nasty problem that can lead to random corruption and kernel panic, much like the last one. Andreas Gruenbacher wrote a simple one-line patch to fix the problem." * tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Avoid alignment hole in struct lm_lockname
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - self-test failure of crc32c on powerpc - regressions of ecb(aes) when used with xts/lrw in s5p-sss - a number of bugs in the omap RNG driver * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix spinlock recursion on LRW(AES) hwrng: omap - Do not access INTMASK_REG on EIP76 hwrng: omap - use devm_clk_get() instead of of_clk_get() hwrng: omap - write registers after enabling the clock crypto: s5p-sss - Fix completing crypto request in IRQ handler crypto: powerpc - Fix initialisation of crc32c context
-
Andreas Gruenbacher authored
Commit 88ffbf3e switches to using rhashtables for glocks, hashing over the entire struct lm_lockname instead of its individual fields. On some architectures, struct lm_lockname contains a hole of uninitialized memory due to alignment rules, which now leads to incorrect hash values. Get rid of that hole. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> CC: <stable@vger.kernel.org> #v4.3+
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver, from Steffen Klassert. 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from Alexei Starovoitov. 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from Michal Schmidt. 4) We can get a divide by zero when TCP socket are morphed into listening state, fix from Eric Dumazet. 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and skb_complete_tx_timestamp(). From Eric Dumazet. 6) Use after free in dccp_feat_activate_values(), also from Eric Dumazet. 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from Jarod Wilson. 8) Fix use after free in vrf_xmit(), from David Ahern. 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from Alexey Kodanev. 10) Properly check napi_complete_done() return value in order to decide whether to re-enable IRQs or not in amd-xgbe driver, from Thomas Lendacky. 11) Fix double free of hwmon device in marvell phy driver, from Andrew Lunn. 12) Don't crash on malformed netlink attributes in act_connmark, from Etienne Noss. 13) Don't remove routes with a higher metric in ipv6 ECMP route replace, from Sabrina Dubroca. 14) Don't write into a cloned SKB in ipv6 fragmentation handling, from Florian Westphal. 15) Fix routing redirect races in dccp and tcp, basically the ICMP handler can't modify the socket's cached route in it's locked by the user at this moment. From Jon Maxwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits) qed: Enable iSCSI Out-of-Order qed: Correct out-of-bound access in OOO history qed: Fix interrupt flags on Rx LL2 qed: Free previous connections when releasing iSCSI qed: Fix mapping leak on LL2 rx flow qed: Prevent creation of too-big u32-chains qed: Align CIDs according to DORQ requirement mlxsw: reg: Fix SPVMLR max record count mlxsw: reg: Fix SPVM max record count net: Resend IGMP memberships upon peer notification. dccp: fix memory leak during tear-down of unsuccessful connection request tun: fix premature POLLOUT notification on tun devices dccp/tcp: fix routing redirect race ucc/hdlc: fix two little issue vxlan: fix ovs support net: use net->count to check whether a netns is alive or not bridge: drop netfilter fake rtable unconditionally ipv6: avoid write to a possibly cloned skb net: wimax/i2400m: fix NULL-deref at probe isdn/gigaset: fix NULL-deref at probe ...
-
- 14 Mar, 2017 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "Three cgroup fixes. Nothing critical: - the pids controller could trigger suspicious RCU warning spuriously. Fixed. - in the debug controller, %p -> %pK to protect kernel pointer from getting exposed. - documentation formatting fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroups: censor kernel pointer in debug files cgroup/pids: remove spurious suspicious RCU usage warning cgroup: Fix indenting in PID controller documentation -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "Three libata fixes: - fix for a circular reference bug in sysfs code which prevented pata_legacy devices from being released after probe failure, which in turn prevented devres from releasing the associated resources. - drop spurious WARN in the command issue path which can be triggered by a legitimate passthrough command. - an ahci_qoriq specific fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: qoriq: correct the sata ecc setting error libata: drop WARN from protocol error in ata_sff_qc_issue() libata: transport: Remove circular dependency at free time -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fix from Tejun Heo: "If a delayed work is queued with NULL @wq, workqueue code explodes after the timer expires at which point it's difficult to tell who the culprit was. This actually happened and the offender was net/smc this time. Add an explicit sanity check for it in the queueing path" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: trigger WARN if queue_delayed_work() is called with NULL @wq
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull percpu fixes from Tejun Heo: - the allocation path was updating pcpu_nr_empty_pop_pages without the required locking which can lead to incorrect handling of empty chunks (e.g. keeping too many around), which is buggy but shouldn't lead to critical failures. Fixed by adding the locking - a trivial patch to drop an unused param from pcpu_get_pages() * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: remove unused chunk_alloc parameter from pcpu_get_pages() percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
-
David S. Miller authored
Yuval Mintz says: ==================== qed: Fixes series This address several different issues in qed. The more significant portions: Patch #1 would cause timeout when qedr utilizes the highest CIDs availble for it [or when future qede adapters would utilize queues in some constellations]. Patch #4 fixes a leak of mapped addresses; When iommu is enabled, offloaded storage protocols might eventually run out of resources and fail to map additional buffers. Patches #6,#7 were missing in the initial iSCSI infrastructure submissions, and would hamper qedi's stability when it reaches out-of-order scenarios. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Mintz, Yuval authored
Missing in the initial submission, qed fails to propagate qedi's request to enable OOO to firmware. Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Mintz, Yuval authored
Need to set the number of entries in database, otherwise the logic would quickly surpass the array. Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling") Signed-off-by:
-
Ram Amrani authored
Before iterating over the the LL2 Rx ring, the ring's spinlock is taken via spin_lock_irqsave(). The actual processing of the packet [including handling by the protocol driver] is done without said lock, so qed releases the spinlock and re-claims it afterwards. Problem is that the final spin_lock_irqrestore() at the end of the iteration uses the original flags saved from the initial irqsave() instead of the flags from the most recent irqsave(). So it's possible that the interrupt status would be incorrect at the end of the processing. Fixes: 0a7fb11c ("qed: Add Light L2 support"); CC: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
-
Mintz, Yuval authored
Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI") Signed-off-by:
-
Mintz, Yuval authored
When receiving an Rx LL2 packet, qed fails to unmap the previous buffer. Fixes: 0a7fb11c ("qed: Add Light L2 support"); Signed-off-by:
-
Tomer Tayar authored
Current Logic would allow the creation of a chain with U32_MAX + 1 elements, when the actual maximum supported by the driver infrastructure is U32_MAX. Fixes: a91eb52a ("qed: Revisit chain implementation") Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
Ram Amrani authored
The Doorbell HW block can be configured at a granularity of 16 x CIDs, so we need to make sure that the actual number of CIDs configured would be a multiplication of 16. Today, when RoCE is enabled - given that the number is unaligned, doorbelling the higher CIDs would fail to reach the firmware and would eventually timeout. Fixes: dbb799c3 ("qed: Initialize hardware for new protocols") Signed-off-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Couple of fixes Couple or small fixes. ==================== Signed-off-by: -
Jiri Pirko authored
The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans learning not being enabled for wider ranges than 255. Fixes: a4feea74 ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
The num_rec field is 8 bit, so the maximal count number is 255. This fixes vlans not being enabled for wider ranges than 255. Fixes: b2e345f9 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions") Signed-off-by:
-
Vlad Yasevich authored
When we notify peers of potential changes, it's also good to update IGMP memberships. For example, during VM migration, updating IGMP memberships will redirect existing multicast streams to the VM at the new location. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Naveen N. Rao authored
commit fc62d020 ("kprobes: Introduce weak variant of kprobe_exceptions_notify()") used the __kprobes annotation to exclude kprobe_exceptions_notify from being probed. Since NOKPROBE_SYMBOL() is a better way to do this enabling the symbol to be discovered as being blacklisted, change over to using NOKPROBE_SYMBOL(). Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/3f25bf400da5c222cd9b10eec6ded2d6b58209f8.1488991670.git.naveen.n.rao@linux.vnet.ibm.comSigned-off-by:
-
Naveen N. Rao authored
Update kprobe tracer documentation to also mention that NOKPROBE_SYMBOL() and nokprobe_inline add symbols to the kprobes blacklist. Signed-off-by:
-
Naveen N. Rao authored
perf now uses an offset from _text/_stext for kretprobes if the kernel supports it, rather than the actual function name. As such, let's choose the LEP for powerpc ABIv2 so as to ensure the probe gets hit. Do it only if the kernel supports specifying offsets with kretprobes. Signed-off-by:
-
Naveen N. Rao authored
We indicate support for accepting sym+offset with kretprobes through a line in ftrace README. Parse the same to identify support and choose the appropriate format for kprobe_events. As an example, without this perf patch, but with the ftrace changes: naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/tracing/README | grep kretprobe place (kretprobe): [<module>:]<symbol>[+<offset>]|<memaddr> naveen@ubuntu:~/linux/tools/perf$ naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d8] Probe point found: do_open+0 Matched function: do_open [35d76b5] found inline addr: 0xc0000000004ba984 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open do_open+0 Writing event: r:probe/do_open_1 do_open+0 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004433d0 r do_open+0x0 [DISABLED] c0000000004433d0 r do_open+0x0 [DISABLED] And after this patch (and the subsequent powerpc patch): naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d8] Probe point found: do_open+0 Matched function: do_open [35d76b5] found inline addr: 0xc0000000004ba984 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469712 Writing event: r:probe/do_open_1 _text+4956248 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004433d0 r do_open+0x0 [DISABLED] c0000000004ba058 r do_open+0x8 [DISABLED] Signed-off-by: -
Naveen N. Rao authored
Simplify and separate out the ftrace README scanning logic into a separate helper. This is used subsequently to scan for all patterns of interest and to cache the result. Since we are only interested in availability of probe argument type x, we will only scan for that. Signed-off-by:
-
Brendan Gregg authored
The --next option shows the next task for each context switch, providing more context for the sequence of scheduler events. $ perf sched timehist --next | head Samples do not have callchains. time cpu task name waittime schdelay run time [tid/pid] (msec) (msec) (msec) ---------- --- ---------- --------- ------ ----- 374.793792 [0] <idle> 0.000 0.000 0.000 next: rngd[1524] 374.793801 [0] rngd[1524] 0.000 0.000 0.009 next: swapper/0[0] 374.794048 [7] <idle> 0.000 0.000 0.000 next: yes[30884] 374.794066 [7] yes[30884] 0.000 0.000 0.018 next: swapper/7[0] 374.794126 [2] <idle> 0.000 0.000 0.000 next: rngd[1524] 374.794140 [2] rngd[1524] 0.325 0.006 0.013 next: swapper/2[0] 374.794281 [3] <idle> 0.000 0.000 0.000 next: perf[31070] Signed-off-by:Brendan Gregg <bgregg@netflix.com> Tested-by:
-
Hari Bathini authored
This patch introduces a cgroup identifier entry field in perf report to identify or distinguish data of different cgroups. It uses the device number and inode number of cgroup namespace, included in perf data with the new PERF_RECORD_NAMESPACES event, as cgroup identifier. With the assumption that each container is created with it's own cgroup namespace, this allows assessment/analysis of multiple containers at once. A simple test for this would be to clone a few processes passing SIGCHILD & CLONE_NEWCROUP flags to each of them, execute shell and run different workloads on each of those contexts, while running perf record command with --namespaces option. Shown below is the output of perf report, sorted with cgroup identifier, on perf.data generated with the above test scenario, clearly indicating one context's considerable use of kernel memory in comparison with others: $ perf report -s cgroup_id,sample --stdio # # Total Lost Samples: 0 # # Samples: 5K of event 'kmem:kmalloc' # Event count (approx.): 5965 # # Overhead cgroup id (dev/inode) Samples # ........ ..................... ............ # 81.27% 3/0xeffffffb 4848 16.24% 3/0xf00000d0 969 1.16% 3/0xf00000ce 69 0.82% 3/0xf00000cf 49 0.50% 0/0x0 30 While this is a start, there is further scope of improving this. For example, instead of cgroup namespace's device and inode numbers, dev and inode numbers of some or all namespaces may be used to distinguish which processes are running in a given container context. Also, scripts to map device and inode info to containers sounds plausible for better tracing of containers. Signed-off-by:
Hari Bathini <hbathini@linux.vnet.ibm.com> Tested-by:
-
Hari Bathini authored
Introduce a new option to display events of type PERF_RECORD_NAMESPACES and update perf-script documentation accordingly. Shown below is output (trimmed) of perf script command with the newly introduced option, on perf.data generated with perf record command using --namespaces option. $ perf script --show-namespace-events swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 1/1 - nr_namespaces: 7 [0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] swapper 0 [000] 0.000000: PERF_RECORD_NAMESPACES 2/2 - nr_namespaces: 7 [0/net: 3/0xf000001c, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] Commiter notes: Testing it: Investigating that double PERF_RECORD_NAMESPACES for the 19155 pid/tid... Its more than that, there are two PERF_RECORD_COMM as well, and with zeroed timestamps, so probably a synthesizing artifact... # perf script --show-task --show-namespace <SNIP> perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19154/19154 perf 0 [000] 0.000000: PERF_RECORD_FORK(19155:19155):(19154:19154) perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155 perf 0 [000] 0.000000: PERF_RECORD_COMM: perf:19155/19155 perf 0 [000] 0.000000: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] swapper 0 [000] 3110.881834: 1 cycles: ffffffffa7060bf6 native_write_msr (/lib/modules/4.11.0-rc1+/build/vmlinux) <SNIP> Signed-off-by:Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891932627.25309.1941587059154176221.stgit@hbathini.in.ibm.comSigned-off-by:
-
Hari Bathini authored
Synthesize PERF_RECORD_NAMESPACES events for processes that were running prior to invocation of perf record. The data for this is taken from /proc/$PID/ns. These changes make way for analyzing events with regard to namespaces. Committer notes: Check if 'tool' is NULL in perf_event__synthesize_namespaces(), as in the test__mmap_thread_lookup case, i.e. 'perf test Lookup mmap thread". Testing it: # ps axH > /tmp/allthreads # perf record -a --namespaces usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.169 MB perf.data (8 samples) ] # perf report -D | grep PERF_RECORD_NAMESPACES | wc -l 602 # wc -l /tmp/allthreads 601 /tmp/allthreads # tail /tmp/allthreads 16951 pts/4 T 0:00 git rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 16952 pts/4 T 0:00 /bin/sh /usr/libexec/git-core/git-rebase -i a033bf1bfacdaa25642e6bcc857a7d0f67cc3c92^ 17176 pts/4 T 0:00 git commit --amend --no-post-rewrite 17204 pts/4 T 0:00 vim /home/acme/git/linux/.git/COMMIT_EDITMSG 18939 ? S 0:00 [kworker/2:1] 18947 ? S 0:00 [kworker/3:0] 18974 ? S 0:00 [kworker/1:0] 19047 ? S 0:00 [kworker/0:1] 19152 pts/6 S+ 0:00 weechat 19153 pts/7 R+ 0:00 ps axH # perf report -D | grep PERF_RECORD_NAMESPACES | tail 0 0 0x125068 [0xa0]: PERF_RECORD_NAMESPACES 17176/17176 - nr_namespaces: 7 0 0 0x1255b8 [0xa0]: PERF_RECORD_NAMESPACES 17204/17204 - nr_namespaces: 7 0 0 0x125df0 [0xa0]: PERF_RECORD_NAMESPACES 18939/18939 - nr_namespaces: 7 0 0 0x125f00 [0xa0]: PERF_RECORD_NAMESPACES 18947/18947 - nr_namespaces: 7 0 0 0x126010 [0xa0]: PERF_RECORD_NAMESPACES 18974/18974 - nr_namespaces: 7 0 0 0x126120 [0xa0]: PERF_RECORD_NAMESPACES 19047/19047 - nr_namespaces: 7 0 0 0x126230 [0xa0]: PERF_RECORD_NAMESPACES 19152/19152 - nr_namespaces: 7 0 0 0x129330 [0xa0]: PERF_RECORD_NAMESPACES 19154/19154 - nr_namespaces: 7 0 0 0x12a1f8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 0 0 0x12b0b8 [0xa0]: PERF_RECORD_NAMESPACES 19155/19155 - nr_namespaces: 7 # Humm, investigate why we got two record for the 19155 pid/tid... Signed-off-by:
-
Jens Axboe authored
If we have scheduling enabled, we jump directly to insert-and-run. That's fine, but we run the queue async and we don't pass in information on whether we can block from this context or not. Fixup both these cases. Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Hari Bathini authored
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: -
Hannes Frederic Sowa authored
This patch fixes a memory leak, which happens if the connection request is not fulfilled between parsing the DCCP options and handling the SYN (because e.g. the backlog is full), because we forgot to free the list of ack vectors. Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
