Mirroring offset_in_page(), this gives you the offset within this
particular page, no matter what size page it is.  It optimises down to
offset_in_page() if CONFIG_TRANSPARENT_HUGEPAGE is not set.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-8-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is like compound_head() but compiles away when
CONFIG_TRANSPARENT_HUGEPAGE is not enabled.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-7-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The thp prefix is more frequently used than hpage and we should be
consistent between the various functions.

[akpm@linux-foundation.org: fix mm/migrate.c]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This function returns the number of bytes in a THP.  It is like
page_size(), but compiles to just PAGE_SIZE if CONFIG_TRANSPARENT_HUGEPAGE
is disabled.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-5-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This function returns the order of a transparent huge page.  It compiles
to 0 if CONFIG_TRANSPARENT_HUGEPAGE is disabled.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-4-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Give up on the notion that we can remove page-flags.h from mm.h.  There
are currently 14 inline functions which use a PageFoo function.  Also, two
of the files directly included by mm.h include page-flags.h themselves,
and there are probably more indirect inclusions.  So just include it at
the top like any other header file.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-3-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "THP prep patches".

These are some generic cleanups and improvements, which I would like
merged into mmotm soon.  The first one should be a performance improvement
for all users of compound pages, and the others are aimed at getting code
to compile away when CONFIG_TRANSPARENT_HUGEPAGE is disabled (ie small
systems).  Also better documented / less confusing than the current prefix
mixture of compound, hpage and thp.

This patch (of 7):

This removes a few instructions from functions which need to know how many
pages are in a compound page.  The storage used is either page->mapping on
64-bit or page->index on 32-bit.  Both of these are fine to overlay on
tail pages.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-1-willy@infradead.org
Link: http://lkml.kernel.org/r/20200629151959.15779-2-willy@infradead.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I had stopped using gkurz@linux.vnet.ibm.com a while back already but this
email address was shutdown last June when I quit IBM.  It's about time to
map it to groug@kaod.org.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/159724692879.76040.4938578139173154028.stgit@bahia.lanSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make sure execve() returns the expected errno values for non-regular
files.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: http://lkml.kernel.org/r/20200813231723.2725102-3-keescook@chromium.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Fix S_ISDIR execve() errno".

Fix an errno change for execve() of directories, noticed by Marc Zyngier.
Along with the fix, include a regression test to avoid seeing this return
in the future.

This patch (of 2):

The return code for attempting to execute a directory has always been
EACCES.  Adjust the S_ISDIR exec test to reflect the old errno instead of
the general EISDIR for other kinds of "open" attempts on directories.

Fixes: 633fb6ac ("exec: move S_ISREG() check earlier")
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Greg Kroah-Hartman <gregkh@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@google.com>
Link: http://lkml.kernel.org/r/20200813231723.2725102-2-keescook@chromium.org
Link: https://lore.kernel.org/lkml/20200813151305.6191993b@whySigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch replaces all memcpy() calls with LZ4_memcpy() which calls
__builtin_memcpy() so the compiler can inline it.

LZ4 relies heavily on memcpy() with a constant size being inlined.  In x86
and i386 pre-boot environments memcpy() cannot be inlined because memcpy()
doesn't get defined as __builtin_memcpy().

An equivalent patch has been applied upstream so that the next import
won't lose this change [1].

I've measured the kernel decompression speed using QEMU before and after
this patch for the x86_64 and i386 architectures.  The speed-up is about
10x as shown below.

Code	Arch	Kernel Size	Time	Speed
v5.8	x86_64	11504832 B	148 ms	 79 MB/s
patch	x86_64	11503872 B	 13 ms	885 MB/s
v5.8	i386	 9621216 B	 91 ms	106 MB/s
patch	i386	 9620224 B	 10 ms	962 MB/s

I also measured the time to decompress the initramfs on x86_64, i386, and
arm.  All three show the same decompression speed before and after, as
expected.

[1] https://github.com/lz4/lz4/pull/890Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Link: http://lkml.kernel.org/r/20200803194022.2966806-1-nickrterrell@gmail.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 26e7dead.

Sonny reported that one of their tests started failing on the latest
kernel on their Chrome OS platform.  The root cause is that the above
commit removed the protection line of empty zone, while the parser used in
the test relies on the protection line to mark the end of each zone.

Let's revert it to avoid breaking userspace testing or applications.

Fixes: 26e7dead ("mm/vmstat.c: do not show lowmem reserve protection information of empty zone)"
Reported-by: Sonny Rao <sonnyrao@chromium.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[5.8.x]
Link: http://lkml.kernel.org/r/20200811075412.12872-1-bhe@redhat.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The #ifdef statement that guards the generic version of pud_alloc_one() by
mistake used __HAVE_ARCH_PUD_FREE instead of __HAVE_ARCH_PUD_ALLOC_ONE.

Fix it.

Fixes: d9e8b929 ("asm-generic: pgalloc: provide generic pud_alloc_one() and pud_free_one()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200812191415.GE163101@linux.ibm.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull timekeeping updates from Thomas Gleixner:
 "A set of timekeeping/VDSO updates:

   - Preparatory work to allow S390 to switch over to the generic VDSO
     implementation.

     S390 requires that the VDSO data pointer is handed in to the
     counter read function when time namespace support is enabled.
     Adding the pointer is a NOOP for all other architectures because
     the compiler is supposed to optimize that out when it is unused in
     the architecture specific inline. The change also solved a similar
     problem for MIPS which fortunately has time namespaces not yet
     enabled.

     S390 needs to update clock related VDSO data independent of the
     timekeeping updates. This was solved so far with yet another
     sequence counter in the S390 implementation. A better solution is
     to utilize the already existing VDSO sequence count for this. The
     core code now exposes helper functions which allow to serialize
     against the timekeeper code and against concurrent readers.

     S390 needs extra data for their clock readout function. The initial
     common VDSO data structure did not provide a way to add that. It
     now has an embedded architecture specific struct embedded which
     defaults to an empty struct.

     Doing this now avoids tree dependencies and conflicts post rc1 and
     allows all other architectures which work on generic VDSO support
     to work from a common upstream base.

   - A trivial comment fix"

* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Delete repeated words in comments
  lib/vdso: Allow to add architecture-specific vdso data
  timekeeping/vsyscall: Provide vdso_update_begin/end()
  vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()

Pull more timer updates from Thomas Gleixner:
 "A set of posix CPU timer changes which allows to defer the heavy work
  of posix CPU timers into task work context. The tick interrupt is
  reduced to a quick check which queues the work which is doing the
  heavy lifting before returning to user space or going back to guest
  mode. Moving this out is deferring the signal delivery slightly but
  posix CPU timers are inaccurate by nature as they depend on the tick
  so there is no real damage. The relevant test cases all passed.

  This lifts the last offender for RT out of the hard interrupt context
  tick handler, but it also has the general benefit that the actual
  heavy work is accounted to the task/process and not to the tick
  interrupt itself.

  Further optimizations are possible to break long sighand lock hold and
  interrupt disabled (on !RT kernels) times when a massive amount of
  posix CPU timers (which are unpriviledged) is armed for a
  task/process.

  This is currently only enabled for x86 because the architecture has to
  ensure that task work is handled in KVM before entering a guest, which
  was just established for x86 with the new common entry/exit code which
  got merged post 5.8 and is not the case for other KVM architectures"

* tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Select POSIX_CPU_TIMERS_TASK_WORK
  posix-cpu-timers: Provide mechanisms to defer timer handling to task_work
  posix-cpu-timers: Split run_posix_cpu_timers()

Pull irq fixes from Thomas Gleixner:
 "Two fixes in the core interrupt code which ensure that all error exits
  unlock the descriptor lock"

* tag 'irq-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Unlock irq descriptor after errors
  genirq/PM: Always unlock IRQ descriptor in rearm_wake_irq()

Pull OpenRISC updates from Stafford Horne:
 "A few patches all over the place during this cycle, mostly bug and
  sparse warning fixes for OpenRISC, but a few enhancements too. Note,
  there are 2 non OpenRISC specific fixups.

  Non OpenRISC fixes:

   - In init we need to align the init_task correctly to fix an issue
     with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I
     kept it on my tree.

   - In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd.
     Arnd asked to merge it via my tree.

  OpenRISC fixes:

   - Many fixes for OpenRISC sprase warnings.

   - Add support OpenRISC SMP tlb flushing rather than always flushing
     the entire TLB on every CPU.

   - Fix bug when dumping stack via /proc/xxx/stack of user threads"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: uaccess: Add user address space check to access_ok
  openrisc: signal: Fix sparse address space warnings
  openrisc: uaccess: Remove unused macro __addr_ok
  openrisc: uaccess: Use static inline function in access_ok
  openrisc: uaccess: Fix sparse address space warnings
  openrisc: io: Fixup defines and move include to the end
  asm-generic/io.h: Fix sparse warnings on big-endian architectures
  openrisc: Implement proper SMP tlb flushing
  openrisc: Fix oops caused when dumping stack
  openrisc: Add support for external initrd images
  init: Align init_task to avoid conflict with MUTEX_FLAGS
  openrisc: fix __user in raw_copy_to_user()'s prototype

Pull powerpc fix from Michael Ellerman:
 "One fix for a boot crash on some platforms introduced by the recent
  pkey refactoring.

  Thanks to Christian Zigotzky and Aneesh Kumar K.V"

* tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)

Pull more xen updates from Juergen Gross:

 - Remove support for running as 32-bit Xen PV-guest.

   32-bit PV guests are rarely used, are lacking security fixes for
   Meltdown, and can be easily replaced by PVH mode. Another series for
   doing more cleanup will follow soon (removal of 32-bit-only pvops
   functionality).

 - Fixes and additional features for the Xen display frontend driver.

* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  drm/xen-front: Pass dumb buffer data offset to the backend
  xen: Sync up with the canonical protocol definition in Xen
  drm/xen-front: Add YUYV to supported formats
  drm/xen-front: Fix misused IS_ERR_OR_NULL checks
  xen/gntdev: Fix dmabuf import with non-zero sgt offset
  x86/xen: drop tests for highmem in pv code
  x86/xen: eliminate xen-asm_64.S
  x86/xen: remove 32-bit Xen PV guest support

Pull hyper-v fixes from Wei Liu:

 - fix oops reporting on Hyper-V

 - make objtool happy

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Make hv_setup_sched_clock inline
  Drivers: hv: vmbus: Only notify Hyper-V for die events that are oops

syzbot found its way in 86_fsgsbase_read_task() and triggered this oops:

   KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
   CPU: 0 PID: 6866 Comm: syz-executor262 Not tainted 5.8.0-syzkaller #0
   RIP: 0010:x86_fsgsbase_read_task+0x16d/0x310 arch/x86/kernel/process_64.c:393
   Call Trace:
     putreg32+0x3ab/0x530 arch/x86/kernel/ptrace.c:876
     genregs32_set arch/x86/kernel/ptrace.c:1026 [inline]
     genregs32_set+0xa4/0x100 arch/x86/kernel/ptrace.c:1006
     copy_regset_from_user include/linux/regset.h:326 [inline]
     ia32_arch_ptrace arch/x86/kernel/ptrace.c:1061 [inline]
     compat_arch_ptrace+0x36c/0xd90 arch/x86/kernel/ptrace.c:1198
     __do_compat_sys_ptrace kernel/ptrace.c:1420 [inline]
     __se_compat_sys_ptrace kernel/ptrace.c:1389 [inline]
     __ia32_compat_sys_ptrace+0x220/0x2f0 kernel/ptrace.c:1389
     do_syscall_32_irqs_on arch/x86/entry/common.c:84 [inline]
     __do_fast_syscall_32+0x57/0x80 arch/x86/entry/common.c:126
     do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:149
     entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

This can happen if ptrace() or sigreturn() pokes an LDT selector into FS
or GS for a task with no LDT and something tries to read the base before
a return to usermode notices the bad selector and fixes it.

The fix is to make sure ldt pointer is not NULL.

Fixes: 07e1d88a ("x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately")
Co-developed-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull crypto fix from Herbert Xu:
 "This fixes a regression in af_alg"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - fix uninitialized ctx->init

Pull module updates from Jessica Yu:
 "The most important change would be Christoph Hellwig's patch
  implementing proprietary taint inheritance, in an effort to discourage
  the creation of GPL "shim" modules that interface between GPL symbols
  and proprietary symbols.

  Summary:

   - Have modules that use symbols from proprietary modules inherit the
     TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim
     modules that are used to circumvent _GPL exports. These are modules
     that claim to be GPL licensed while also using symbols from
     proprietary modules. Such modules will be rejected while non-GPL
     modules will inherit the proprietary taint.

   - Module export space cleanup. Unexport symbols that are unused
     outside of module.c or otherwise used in only built-in code"

* tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  modules: inherit TAINT_PROPRIETARY_MODULE
  modules: return licensing information from find_symbol
  modules: rename the licence field in struct symsearch to license
  modules: unexport __module_address
  modules: unexport __module_text_address
  modules: mark each_symbol_section static
  modules: mark find_symbol static
  modules: mark ref_module static
  modules: linux/moduleparam.h: drop duplicated word in a comment

Pull Kconfig updates from Masahiro Yamada:

 - remove '---help---' keyword support

 - fix mouse events for 'menuconfig' symbols in search view of qconf

 - code cleanups of qconf

* tag 'kconfig-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: qconf: move setOptionMode() to ConfigList from ConfigView
  kconfig: qconf: do not limit the pop-up menu to the first row
  kconfig: qconf: refactor icon setups
  kconfig: qconf: remove unused voidPix, menuInvPix
  kconfig: qconf: remove ConfigItem::text/setText
  kconfig: qconf: remove ConfigList::addColumn/removeColumn
  kconfig: qconf: remove ConfigItem::pixmap/setPixmap
  kconfig: qconf: drop more localization code
  kconfig: qconf: remove 'parent' from ConfigList::updateMenuList()
  kconfig: qconf: remove unused argument from ConfigView::updateList()
  kconfig: qconf: remove unused argument from ConfigList::updateList()
  kconfig: qconf: omit parent to QHBoxLayout()
  kconfig: qconf: remove name from ConfigSearchWindow constructor
  kconfig: qconf: remove unused ConfigList::listView()
  kconfig: qconf: overload addToolBar() to create and insert toolbar
  kconfig: qconf: remove toolBar from ConfigMainWindow members
  kconfig: qconf: use 'menu' variable for (QMenu *)
  kconfig: qconf: do not use 'menu' variable for (QMenuBar *)
  kconfig: qconf: remove ->addSeparator() to menuBar
  kconfig: add 'static' to some file-local data
  ...

ConfigView::setOptionMode() only gets access to the 'list' member.

Move it to the more relevant ConfigList class.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

If you right-click the first row in the option tree, the pop-up menu
shows up, but if you right-click the second row or below, the event
is ignored due to the following check:

  if (e->y() <= header()->geometry().bottom()) {

Perhaps, the intention was to show the pop-menu only when the tree
header was right-clicked, but this handler is not called in that case.

Since the origin of e->y() starts from the bottom of the header,
this check is odd.

Going forward, you can right-click anywhere in the tree to get the
pop-up menu.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

These icon data are used by ConfigItem, but stored in each instance
of ConfigView. There is no point to keep the same data in each of 3
instances, "menu", "config", and "search".

Move the icon data to the more relevant ConfigItem class, and make
them static members.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

These are initialized, but not used by anyone.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use QTreeWidgetItem::text/setText directly
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use QTreeView::showColumn/hideColumn directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use QTreeWidgetItem::icon/setIcon directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This is a remnant of commit 694c49a7 ("kconfig: drop localization
support").

Get it back to the code prior to commit 3b9fa093 ("[PATCH] Kconfig
i18n support").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

All the call-sites of this function pass 'this' to the first argument.

So, 'parent' is always the 'this' pointer.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Now that ConfigList::updateList() takes no argument, the 'item' argument
ConfigView::updateList() is no longer used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This function allocates 'item' before using it, so the argument 'item'
is always shadowed.

Remove the meaningless argument.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Instead of passing 0 (i.e. nullptr), leave it empty.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This constructor is only called with "search" as the second argument.

Hard-code the name in the constructor, and drop it from the function
argument.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

I do not know how this function can be useful. In fact, it is unsed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Use the overloaded function, addToolBar(const QString &title)
to create a QToolBar object, setting its window title, and inserts
it into the toolbar area.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This pointer is only used in the ConfigMainWindow constructor.

Drop it from the private members.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>