- 09 May, 2018 3 commits
-
-
Simon Que authored
Improves code clarity in two ways: 1. The plural name makes it more clear that it is an array. 2. The name of the array is now no longer identical to the struct type name, so it is easier to find in the code. Signed-off-by:
Simon Que <sque@chromium.org> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Niklas Söderlund authored
s/dose/does/ Fixes: d295c6a4 ("[media] media: entity: Add media_entity_get_fwnode_pad() function") Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Bingbu Cao authored
Interrupt behavior shows that some time the frame end and frame start of next frame is unstable and can range from several to hundreds of micro-sec. In the case of ~10us, isr may not clear next sof interrupt status in single handling, which prevents new interrupts from coming. Fix this by handling all pending IRQs before exiting isr, so any abnormal behavior results from very short interrupt status changes is protected. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Andy Yeh <andy.yeh@intel.com> Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
- 05 May, 2018 37 commits
-
-
Mauro Carvalho Chehab authored
Just checking for ifdefs cause build issues as reported by kernel test: config: openrisc-allmodconfig (attached as .config) compiler: or1k-linux-gcc (GCC) 6.0.0 20160327 (experimental) All errors (new ones prefixed by >>): drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_init_connections': >> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:8: error: implicit declaration of function 'omapdss_find_mgr_from_display' [-Werror=implicit-function-declaration] mgr = omapdss_find_mgr_from_display(def_dssdev); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion] mgr = omapdss_find_mgr_from_display(def_dssdev); ^ drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_find_default_display': >> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:13: error: implicit declaration of function 'omapdss_get_default_display_name' [-Werror=implicit-function-declaration] def_name = omapdss_get_default_display_name(); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:11: warning: assignment makes pointer from integer without a cast [-Wint-conversion] def_name = omapdss_get_default_display_name(); ^ So, use IS_ENABLED() instead. Fixes: 771f7be8 ("media: omapfb: omapfb_dss.h: add stubs to build with COMPILE_TEST && DRM_OMAP") Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: tomi.valkeinen@ti.com Cc: linux-omap@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: -
Brad Love authored
0day build bot reported an unnoticed recursive dependency, fix it by removing the select statement. fixes: c66d4d99a8fb ("cx231xx: Add I2C_MUX dependency") Signed-off-by:Brad Love <brad@nextdimension.cc> Signed-off-by:
-
Hans de Goede authored
The recent "x86 ZONE_DMA love" discussion at LSF/MM pointed out that some gspca sub-drivvers are using GFP_DMA to allocate buffers which are used for USB bulk transfers, there is absolutely no need for this, drop it. Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This driver depends on sony-laptop driver, but this is available only for x86. So, add a stub function, in order to allow building it on non-x86 too. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Yasunari Takiguchi authored
This is the version update for this cxd2880 driver changing. Signed-off-by:
Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by:
Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by:
Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by:
Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by:
Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by:
Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by:
-
Yasunari Takiguchi authored
This is the optimization for SPI drive current and signal lock condition check part for BER/PER measure to ensure BER/PER are stable Signed-off-by:
-
Yasunari Takiguchi authored
This is the modification of structure declaration for spi_transfer. Signed-off-by:
-
Mauro Carvalho Chehab authored
As newer boards got added, update the cardlists. Signed-off-by: -
Marcel Stork authored
Extra code to be able to use this stick, only digital, not analog nor remote-control. Signed-off-by:
Marcel Stork <mjstork@gmail.com> Signed-off-by:
-
Marcel Stork authored
A cosmetic change by combining two sets of boards into one set because having the same arguments. Signed-off-by:
-
Niklas Söderlund authored
The VIN Gen3 hardware don't have Line Post-Clip capabilities as VIN Gen2 hardware have. To protect against writing outside the capture window enable field toggle after a set number of lines have been captured. Capturing outside the allocated capture buffer where observed on R-Car Gen3 Salvator-XS H3 from the CVBS input if the standard is misconfigured. That is if a PAL source is connected to the system but the adv748x standard is set to NTSC. In this case the format reported by the adv748x is 720x480 and that is what is used for the media pipeline. The PAL source generates frames in the format of 720x576 and the field is not toggled until the VSYNC is detected and at that time data have already been written outside the allocated capture buffer. With this change the capture in the situation described above results in garbage frames but that is far better then writing outside the capture buffer. Signed-off-by:
-
Niklas Söderlund authored
By setting VNMC_YCAL rcar-vin can support input video in MEDIA_BUS_FMT_UYVY8_1X16 format. Signed-off-by:
-
Niklas Söderlund authored
Store the group pointer before disassociating the VIN from the group. Fixes: 3bb4c3bc ("media: rcar-vin: add group allocator functions") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Niklas Söderlund authored
The compatible string "renesas,rcar-gen3-vin" was added before the Gen3 driver code was added but it's not possible to use. Each SoC in the Gen3 series require SoC specific knowledge in the driver to function. Remove it before it is added to any device tree descriptions. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Devin Heitmueller authored
This was left over from the conversion to VB2, where the call was getting invoked both in buffer_queue and start_streaming, which was intermittently causing invalid opcodes on the VBI RISC queue. This change effectively mirrors the exact same change Hans Verkuil made in cx88-video.c in commit 389208e1 ("[media] cx88: remove leftover start_video_dma() call"). Thanks to Daniel Glöckner for spotting the actual bug after I spent several days trying to chase down the issue. Fixes: 389208e1 ("[media] cx88: remove leftover start_video_dma() call") Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Thanks-to: Daniel Glöckner <daniel-gl@gmx.net> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Luc Van Oostenryck authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Luc Van Oostenryck authored
The method dvb_frontend_ops::search() is defined as returning an 'enum dvbfe_search', but the implementation in this driver returns an 'int'. Fix this by returning 'enum dvbfe_search' in this driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method dvb_frontend_ops::get_frontend_algo() is defined as returning an 'enum dvbfe_algo', but the implementation in this driver returns an 'int'. Fix this by returning 'enum dvbfe_algo' on drivers. [mchehab+samsung@kernel.org: merge similar patches and patch ddbridge-mci.c the same way] Signed-off-by:
-
Anders Roxell authored
Commit 7378f114 ("media: omap2: omapfb: allow building it with COMPILE_TEST") broke compilation without CONFIG_I2C selected. drivers/media/platform/fsl-viu.c: In function ‘viu_of_probe’: drivers/media/platform/fsl-viu.c:1452:7: error: implicit declaration of function ‘i2c_get_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration] ad = i2c_get_adapter(0); ^~~~~~~~~~~~~~~ i2c_lock_adapter drivers/media/platform/fsl-viu.c:1452:5: warning: assignment makes pointer from integer without a cast [-Wint-conversion] ad = i2c_get_adapter(0); ^ drivers/media/platform/fsl-viu.c:1534:2: error: implicit declaration of function ‘i2c_put_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration] i2c_put_adapter(ad); ^~~~~~~~~~~~~~~ i2c_lock_adapter Added I2C dependency in order to make all configurations work again. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Daniel Scheller authored
s/shifs/shifts/ Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Daniel Scheller authored
Commit ee93340e ("media: ngene: deduplicate I2C adapter evaluation") added a helper to evaluate the I2C adapter to be used for demod/tuner attachment based on the given ngene_channel, and that helper is used in many attach functions to initialise the i2c_adapter variable. However, for some reason in tuner_attach_stv6110() and demod_attach_stv0900(), the adapter evaluation wasn't removed as in all other functions. Fix (or finalize, even) the helper use by cleaning up the superfluous I2C adapter evaluation leftover in these two functions. Signed-off-by:
-
Mauro Carvalho Chehab authored
As pointed by ktest: >> drivers/media//pci/pt1/pt1.c:1433:5: warning: "CONFIG_PM_SLEEP" is not defined, evaluates to 0 [-Wundef] #if CONFIG_PM_SLEEP ^~~~~~~~~~~~~~~ Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
-
Colin Ian King authored
The value from a readl is being masked with ITE_REG_CIOCAN_MASK however this is not being used and cfg is being re-assigned. I believe the assignment operator should actually be instead the |= operator. Detected by CoverityScan, CID#1467987 ("Unused value") Signed-off-by:Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/usb/cx231xx/cx231xx-dvb.c: In function 'unregister_dvb': drivers/media/usb/cx231xx/cx231xx-dvb.c:607:21: warning: unused variable 'client' [-Wunused-variable] struct i2c_client *client; ^~~~~~ Fixes: a12481354656 ("media: cx231xx: Switch to using new dvb i2c helpers") Signed-off-by: -
Brad Love authored
cx231xx requires i2c mux adapter capability. Signed-off-by:
-
Brad Love authored
VIDEO_CX231XX_RC requires RC_CORE, but VIDEO_CX231XX does not require RC to compile or function. Signed-off-by:
-
Brad Love authored
The default is now 0, no need to override Signed-off-by:
-
Brad Love authored
Trim out some unused config params. Use the i2c mux adapter returned by frontend with the tuner. Signed-off-by:
-
Brad Love authored
Mostly very straight forward replace of blocks with equivalent code. Cleanup added at end of dvb_init in case of failure. Signed-off-by:
-
Brad Love authored
Hauppauge 935C cannot communicate with the si2157 when using the mux adapter returned by the si2168, so disable it to fix the device. Signed-off-by:
-
Brad Love authored
Replace zero fill memset inits with equivalent {} in declaration Signed-off-by: -
Brad Love authored
Replace all usage of hard coded values with the proper field from the board profile. Signed-off-by:
-
Brad Love authored
Now the board values match the hard coded constants used in the dvb initialization. Signed-off-by:
-
Jia-Ju Bai authored
Despite never getting called from atomic context, usb URB memory allocations use GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. [mchehab+samsung@kernel.org: merged 3 similar patches into one] Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/media/pci/pt1/pt1.c:213 config_demod() error: strncmp() '"tc90522sat"' too small (11 vs 20) Use the same strncmp() syntax as pt1_init_frontends() does. Signed-off-by: -
Akihiro Tsukada authored
As described in Document/timers/timers-howto.txt, hrtimer-based delay should be used for small sleeps. Signed-off-by:
Akihiro Tsukada <tskd08@gmail.com> Signed-off-by:
-
Akihiro Tsukada authored
Without this patch, re-loading of the module was required after resume. Signed-off-by:
-
