- 12 Aug, 2019 15 commits
-
-
Rob Herring authored
In preparation to create partial GPU mappings of BOs on page faults, split out the SG list handling of panfrost_mmu_map(). Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed: Steven Price <steven.price@arm.com> Acked-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190808222200.13176-5-robh@kernel.org
-
Rob Herring authored
Setting the GPU VA when creating the GEM object doesn't allow for any conditional adjustments to the mapping. In preparation to support adjusting the mapping and per FD address spaces, restructure the GEM object creation to map and unmap the GEM object in the GEM object .open() and .close() hooks. While panfrost_gem_free_object() and panfrost_gem_prime_import_sg_table() are not really needed after this commit, keep them as we'll need them in subsequent commits. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Steven Price <steven.price@arm.com> Acked-by:
-
Rob Herring authored
If a driver does its own management of pages, the shmem helper object's pages array could be allocated when a SG table is not. There's not really any good reason to tie putting pages with having a SG table when freeing the object, so just put pages if the pages array is populated. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Rob Herring authored
Panfrost has a need for pages allocated on demand via GPU page faults. When releasing the pages, the only thing preventing using drm_gem_put_pages() is needing to skip over unpopulated pages, so allow for skipping over NULL struct page pointers. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Hans de Goede authored
Add -ENODEV to the list of usb-transfer errors which we ignore to avoid logging Frame update errors when the device gets unplugged. Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190811143725.5951-2-hdegoede@redhat.com
-
Hans de Goede authored
I made the condition of the wait_event_timeout call in gm12u320_fb_update_work a helper which takes a mutex to make sure that any writes to fb_update.run or fb_update.fb from other CPU cores are seen before the check is done. This is not necessary as the wait_event helpers contain the necessary barriers for this themselves. More over it is harmfull since by the time the check is done the task is no longer in the TASK_RUNNING state and calling mutex_lock while not in task-running is not allowed, leading to this warning when the kernel is build with some extra locking checks enabled: [11947.450011] do not call blocking ops when !TASK_RUNNING; state=2 set at [<00000000e4306de6>] prepare_to_wait_event+0x61/0x190 This commit fixes this by dropping the helper and simply directly checking the condition (without unnecessary locking) in the wait_event_timeout call. Acked-by: -
Hans de Goede authored
Previously the driver was using a mix of DRM_ERROR and dev_err, be consisent and use DRM_DEV_ERROR everywhere instead. Cc: Sam Ravnborg <sam@ravnborg.org> Suggested-by:
-
Hans de Goede authored
3 small cleanups: 1) Drop unused DRIVER_PATCHLEVEL 2) We do not set mode_config.preferred_depth, so instead of passing the unset mode_config.preferred_depth to drm_fbdev_generic_setup simply pass 0 3) Use __maybe_unused instead of #ifdef CONFIG_PM around the suspend / resume functions Cc: Sam Ravnborg <sam@ravnborg.org> Suggested-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Jason Ekstrand authored
This patch only brings the syncobj documentation up-to-date for the original form of syncobj. It does not contain any information about the design of timeline syncobjs. v2: Incorporate feedback from Lionel and Christian: - Mention actual ioctl and flag names - Better language around reference counting - Misc. language cleanups Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Sean Paul authored
Fixes the following warnings: ../drivers/gpu/drm/drm_connector.c:989: WARNING: Unexpected indentation. ../drivers/gpu/drm/drm_connector.c:993: WARNING: Unexpected indentation. ../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string. ../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string. Changes in v2: - Use () instead of & for functions (Sam) Fixes: 1b27fbdd ("drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers") Fixes: bb5a45d4 ("drm/hdcp: update content protection property with uevent") Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190812140112.6702-1-sean@poorly.run
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 1000 in order to avoid a potential integer overflow and give the compiler complete information about the proper arithmetic to use. Notice that this constant is being used in a context that expects an expression of type u64, but it's currently evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1485796 ("Unintentional integer overflow") Fixes: ed22c6d9 ("drm/komeda: Use drm_display_mode "crtc_" prefixed hardware timings") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
-
Chris Wilson authored
Same as for the individual fences, we want to report the actual status of the fence when queried. Reported-by:
Petri Latvala <petri.latvala@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Petri Latvala <petri.latvala@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812091203.29871-1-chris@chris-wilson.co.uk
-
Ondrej Jirman authored
Orange Pi 3 board requires enabling a voltage shifting circuit via GPIO for the DDC bus to be usable. Add support for hdmi-connector node's optional ddc-en-gpios property to support this use case. Signed-off-by:
Ondrej Jirman <megous@megous.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190806155744.10263-4-megous@megous.com
-
Ondrej Jirman authored
Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable on-board voltage shifting logic for the DDC bus using a gpio to be able to access DDC bus. Use ddc-en-gpios property on the hdmi-connector to model this. Add binding documentation for optional ddc-en-gpios property. Signed-off-by:
-
Chris Wilson authored
When one of the array of fences is signaled, propagate its errors to the parent fence-array (keeping the first error to be raised). v2: Opencode cmpxchg_local to avoid compiler freakout. v3: Be careful not to flag an error if we race against signal-on-any. v4: Same applies to installing the signal cb. v5: Use cmpxchg to only set the error once before using a nifty idea by Christian to avoid changing the status after emitting the signal. Signed-off-by:
-
- 10 Aug, 2019 12 commits
-
-
Sam Ravnborg authored
There are no errors that can be reported by this function, so drop the return code. Fix the only bridge driver that checked the return result. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-14-sam@ravnborg.org
-
Sam Ravnborg authored
Inline comments provide better space for additional comments. Comments was slightly edited to follow the normal style, but no change to actual content. Used the opportuniy to change the order in drm_panel_funcs to follow the order they will be used by a panel. Signed-off-by:
-
Sam Ravnborg authored
Move inline functions from include/drm/drm_panel.h to drm_panel.c. This is in preparation for follow-up patches that will add extra logic to the functions. As they are no longer static inline, EXPORT them. v2: - align order of functions in drm_panel.h and drm_panel.c (Laurent) Signed-off-by:
-
Sam Ravnborg authored
To prepare the driver to receive drm_connector only in the get_modes() callback, move bus_flags handling to ili9322_get_modes(). Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Sam Ravnborg authored
Use the drm_panel_get_modes() function. Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-by:
-
Sam Ravnborg authored
Use drm_panel_get_modes() to access modes. This has a nice side effect to simplify the code. drm_panel_get_modes() may return a negative value if for example panel is NULL. This is a small change compared to before, but really what we want. v2: - Add more info to changelog (Stefan) Signed-off-by:
-
Sam Ravnborg authored
Use the drm_panel_get_modes() function to get the modes. This patch leave one test for the function pointer: panel->funcs->get_modes This is used to check if the panel may have any modes. There is no direct replacement. We may be able to just check that drm_panel_get_modes() return > 0, but as this is not the same functionality it is left for later. Signed-off-by:Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
-
Sam Ravnborg authored
Replace open coded version with call to drm_panel_get_modes(). Include change to deal with the possible negative return values from drm_panel_get_modes() v2: - Added more info to changelog (Philipp) Signed-off-by:
-
Christian König authored
Other cores don't busy wait any more and we removed the last user of checking the seqno for changes. Drop updating the number for shared fences altogether. Signed-off-by:
-
Christian König authored
Instead of open coding the sequence loop use the new helper. Signed-off-by:
-
Christian König authored
Add a new helper to get a consistent set of pointers from the reservation object. While at it group all access helpers together in the header file. v2: correctly return shared_count as well Signed-off-by:
-
Christian König authored
We clear the callback list on kref_put so that by the time we release the fence it is unused. No one should be adding to the cb_list that they don't themselves hold a reference for. This small change is actually making the structure 16% smaller. v2: add the comment to the code as well. Signed-off-by:
-
- 09 Aug, 2019 12 commits
-
-
Julien Masson authored
According to the register description of ENCI_MACV_MAX_AMP, the macrovision max amplitude value should be: - hdmi 480i => 0xb - hdmi 576i => 0x7 The max value is 0x7ff (10 bits). Signed-off-by:
Julien Masson <jmasson@baylibre.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Julien Masson authored
This patch add new macro HHI_HDMI_PLL_CNTL_EN which is used to enable HDMI PLL. Signed-off-by:
-
Julien Masson authored
This patch aims to: - Add general and TODO comments - Respect coding style for multi-line comments - Align macro definitions - Remove useless macro Signed-off-by:
-
Julien Masson authored
This patch add new macros which are used to set the following registers: - ENCI_CFILT_CTRL - ENCI_CFILT_CTRL2 - ENCI_MACV_MAX_AMP - ENCI_VIDEO_MODE_ADV - ENCI_VFIFO2VD_CTL - ENCI_VIDEO_EN - ENCP_VIDEO_MODE - VPU_HDMI_SETTING - VENC_UPSAMPLE_CTRL0 - VENC_UPSAMPLE_CTRL1 - VENC_UPSAMPLE_CTRL2 - VENC_VDAC_FIFO_CTRL - VENC_VDAC_DAC0_FILT_CTRL0 - VENC_INTCTRL Signed-off-by:
-
Julien Masson authored
This patch add new macros which are used to set the following registers: - VIU_SW_RESET - VIU_OSD1_CTRL_STAT - VIU_OSD2_CTRL_STAT - VIU_OSD1_FIFO_CTRL_STAT - VIU_OSD2_FIFO_CTRL_STAT - VIU_MISC_CTRL0 - VIU_OSD_BLEND_CTRL - OSD1_BLEND_SRC_CTRL - OSD2_BLEND_SRC_CTRL - DOLBY_PATH_CTRL Signed-off-by:
-
Julien Masson authored
This patch add new macros which are used to set the following registers: - VPP_OSD_SCALE_COEF_IDX - VPP_DOLBY_CTRL - VPP_OFIFO_SIZE - VPP_HOLD_LINES - VPP_SC_MISC - VPP_VADJ_CTRL Signed-off-by:
-
Julien Masson authored
This patch add new macro which is used to set WRARB/RDARB mode of the VPU. Signed-off-by:
-
Julien Masson authored
This patch add new macros which describe couple bits field of the following registers: - VD1_BLEND_SRC_CTRL - VPP_SC_MISC Signed-off-by:
-
Julien Masson authored
The value used in the macro writel_bits_relaxed has to be masked since we don't want change the bits outside the mask. Signed-off-by:
-
Linus Walleij authored
This adds support for the TI nspire panels to the simple panel roster. This code is based on arch/arm/mach-nspire/clcd.c. This includes likely the first grayscale panel supported. These panels will be used with the PL11x DRM driver. Cc: Daniel Tang <dt.tangr@gmail.com> Cc: Fabian Vogt <fabian@ritter-vogt.de> Tested-by:
Fabian Vogt <fabian@ritter-vogt.de> Reviewed-by:
-
Linus Walleij authored
Add bindings for the TI NSPIRE simple display panels. Cc: devicetree@vger.kernel.org Reviewed-by:
-
Linus Walleij authored
Migrating the TI nspire calculators to use the PL111 driver for framebuffer requires grayscale support for the elder panel which uses 8bit grayscale only. DRM does not support 8bit grayscale framebuffers in memory, but by defining the bus format to be MEDIA_BUS_FMT_Y8_1X8 we can get the hardware to turn on a grayscaling feature and convert the RGB framebuffer to grayscale for us. Cc: Daniel Tang <dt.tangr@gmail.com> Cc: Fabian Vogt <fabian@ritter-vogt.de> Tested-by:
-
- 08 Aug, 2019 1 commit
-
-
Rob Herring authored
Add support for madvise and a shrinker similar to other drivers. This allows userspace to mark BOs which can be freed when there is memory pressure. Unlike other implementations, we don't depend on struct_mutex. The driver maintains a list of BOs which can be freed when the shrinker is called. Access to the list is serialized with the shrinker_lock. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by:
-
