- 04 Jun, 2018 5 commits
-
-
Darrick J. Wong authored
If a btree lookup encounters an empty btree node or an empty btree leaf on a multi-level btree, that's evidence of a corrupt on-disk btree. Therefore, we should return -EFSCORRUPTED to the upper levels, not an ASSERT failure. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com>
-
Darrick J. Wong authored
Return -EFSCORRUPTED when the bnobt/cntbt return obviously corrupt values, rather than letting them bounce around in the internal code. Signed-off-by:
-
Darrick J. Wong authored
In xfs_dir2_leaf_addname we ASSERT if the length of the unused space described by bestfree[0] is less the amount of space we wish to consume. Immediately after it is a call to xfs_dir2_data_use_free where the offset parameter is offset of the unused space and the length parameter is the amount of space we wish to consume. Both values (and the unused space pointer) are passed into xfs_dir2_data_check_free, which also validates that the region of unused space is big enough to cover the space we wish to consume. This is effectively the same check that the ASSERT covers, and since a check failure results in a corruption message being logged we can remove the ASSERT. Signed-off-by:
-
Darrick J. Wong authored
Don't bother ASSERTing when we're already going to log and return the corruption status. Signed-off-by:
-
Darrick J. Wong authored
On a directory, the DAX flag is merely a hint that files created in the directory should have the DAX flag set at creation time. We don't care if the underlying device supports DAX or not because directory metadata are always cached in DRAM. We don't care if new files get the flag even if the device doesn't support DAX because we always check for DAX support before setting the VFS flag (S_DAX). Signed-off-by:
-
- 03 Jun, 2018 1 commit
-
-
Dave Chinner authored
The heads of tha AGI unlinked list are only scanned on debug kernels when the verifier runs. Change that to always scan the heads and validate that the inode numbers are valid. Signed-off-by:
-
- 02 Jun, 2018 14 commits
-
-
Christoph Hellwig authored
This way the implementation doesn't depend on buffer_head internals. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
We only call into this function through the iomap iterators, so we already know the buffer is unwritten. In addition to that we always require the uptodate flag that is ORed with the result anyway. Signed-off-by:
-
Christoph Hellwig authored
This function is only used by the iomap code, depends on being called from it, and will soon stop poking into buffer head internals. Signed-off-by:
-
Christoph Hellwig authored
Switch to the iomap based bmap implementation to get rid of one of the last users of xfs_get_blocks. Signed-off-by:
-
Christoph Hellwig authored
This adds a simple iomap-based implementation of the legacy ->bmap interface. Note that we can't easily add checks for rt or reflink files, so these will have to remain in the callers. This interface just needs to die.. Signed-off-by:
-
Christoph Hellwig authored
Factor the repeated calculation of the on-disk sector for a given logical block into a littler helper. Signed-off-by:
-
Christoph Hellwig authored
We don't need any merging logic, and this also replaces a BUG_ON with a WARN_ON_ONCE inside __bio_add_page for the impossible overflow condition. Signed-off-by:
-
Christoph Hellwig authored
Just define a range of fs specific flags and use that in gfs2 instead of exposing this internal flag globally. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Inline data is fundamentally different from our normal mapped case in that it doesn't even have a block address. So instead of having a flag for it it should be an entirely separate iomap range type. Signed-off-by:
-
Christoph Hellwig authored
That way file systems don't have to go spotting for non-contiguous pages and work around them. It also kicks off I/O earlier, allowing it to finish earlier and reduce latency. Signed-off-by:
-
Christoph Hellwig authored
We never return an error, so switch to returning an unsigned int. Most callers already did implicit casts to an unsigned type, and the one that didn't can be simplified now. Suggested-by:
Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Christoph Hellwig authored
It counts the number of pages acted on, so name it nr_pages to make that obvious. Signed-off-by:
-
Christoph Hellwig authored
For the upcoming removal of buffer heads in XFS we need to keep track of the number of outstanding writeback requests per page. For this we need to know if bio_add_page merged a region with the previous bvec or not. Instead of adding additional arguments this refactors bio_add_page to be implemented using three lower level helpers which users like XFS can use directly if they care about the merge decisions. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
- 01 Jun, 2018 5 commits
-
-
Dave Chinner authored
generic/475 fired an assert failure just after the filesystem was shut down: XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_refcount.c, line: 182 ..... Call Trace: xfs_refcount_insert+0x151/0x190 xfs_refcount_adjust_extents.constprop.11+0x9c/0x470 xfs_refcount_adjust.constprop.10+0xb0/0x270 xfs_refcount_finish_one+0x25a/0x420 xfs_trans_log_finish_refcount_update+0x2a/0x40 xfs_refcount_update_finish_item+0x35/0xa0 xfs_defer_finish+0x15e/0x4d0 xfs_reflink_remap_extent+0x1bc/0x610 xfs_reflink_remap_blocks+0x6e/0x280 xfs_reflink_remap_range+0x311/0x530 vfs_clone_file_range+0x119/0x200 .... If xfs_btree_insert() returns an error, the corruption check fires instead of passing the error back the caller. The corruption check should be after we've checked for an error, not before, thereby avoiding assert failures if the filesystem shuts down during a refcount btree record insert. Signed-off-by:
-
Darrick J. Wong authored
All the realtime allocation functions deal with space on the rtdev in units of realtime extents. However, struct xfs_rtalloc_rec confusingly uses the word 'block' in the name, even though they're really extents. Fix the naming problem and fix all the unit handling problems in the two existing users. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Reviewed-by:
Bill O'Donnell <billodo@redhat.com>
-
Darrick J. Wong authored
Strengthen the rtalloc range query checks to make sure that the keys do not run off the end of the realtime device inappropriately. Note that the query range functions require units of rt extents, not blocks, despite the type name. Signed-off-by:
-
Darrick J. Wong authored
The xfs_rtbuf_get function should check the block mapping it gets back from bmapi_read. If there are no mappings or the mapping isn't a real extent, we should return -EFSCORRUPTED rather than trying to read a garbage value. We also require realtime bitmap blocks to be real, written allocations. Signed-off-by:
-
Darrick J. Wong authored
xfs_rtword_t is used for bit manipulations in the realtime bitmap file. Since we're performing bit shifts with this type, we don't want sign extension and we don't want to be left shifting negative quantities because that's undefined behavior. This also shuts up these UBSAN warnings: UBSAN: Undefined behaviour in fs/xfs/libxfs/xfs_rtbitmap.c:833:48 signed integer overflow: -2147483648 - 1 cannot be represented in type 'int' Signed-off-by:
-
- 31 May, 2018 2 commits
-
-
Dave Jiang authored
The function return values are confusing with the way the function is named. We expect a true or false return value but it actually returns 0/-errno. This makes the code very confusing. Changing the return values to return a bool where if DAX is supported then return true and no DAX support returns false. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
-
Darrick J. Wong authored
Change bdev_dax_supported so it takes a bdev parameter. This enables multi-device filesystems like xfs to check that a dax device can work for the particular filesystem. Once that's in place, actually fix all the parts of XFS where we need to be able to distinguish between datadev and rtdev. This patch fixes the problem where we screw up the dax support checking in xfs if the datadev and rtdev have different dax capabilities. Signed-off-by:
Eric Sandeen <sandeen@redhat.com>
-
- 30 May, 2018 8 commits
-
-
Darrick J. Wong authored
If one of the backup superblocks is found to differ seriously from superblock 0, write out a fresh copy from the in-core sb. Signed-off-by:
-
Darrick J. Wong authored
Add a helper routine to attach quota information to inodes that are about to undergo repair. If that fails, we need to schedule a quotacheck for the next mount but allow the corrupted metadata repair to continue. Signed-off-by:
-
Darrick J. Wong authored
Add a helper function to help us recover btree roots from the rmap data. Callers pass in a list of rmap owner codes, buffer ops, and magic numbers. We iterate the rmap records looking for owner matches, and then read the matching blocks to see if the magic number & uuid match. If so, we then read-verify the block, and if that passes then we retain a pointer to the block with the highest level, assuming that by the end of the call we will have found the root. This will be used to reset the AGF/AGI btree root fields during their rebuild procedures. Signed-off-by:
-
Darrick J. Wong authored
Now that we've plumbed in the ability to construct a list of dead btree blocks following a repair, add more helpers to dispose of them. This is done by examining the rmapbt -- if the btree was the only owner we can free the block, otherwise it's crosslinked and we can only remove the rmapbt record. Signed-off-by:
-
Darrick J. Wong authored
Add some helpers to assemble a list of fs block extents. Generally, repair functions will iterate the rmapbt to make a list (1) of all extents owned by the nominal owner of the metadata structure; then they will iterate all other structures with the same rmap owner to make a list (2) of active blocks; and finally we have a subtraction function to subtract all the blocks in (2) from (1), with the result that (1) is now a list of blocks that were owned by the old btree and must be disposed. Signed-off-by:
-
Darrick J. Wong authored
Add a pair of helper functions to allocate and initialize fresh btree roots. The repair functions will use these as part of recreating corrupted metadata. Signed-off-by:
-
Darrick J. Wong authored
For repairs, we need to reserve at least as many blocks as we think we're going to need to rebuild the data structure, and we're going to need some helpers to roll transactions while maintaining locks on the AG headers so that other threads cannot wander into the middle of a repair. Signed-off-by:
-
Darrick J. Wong authored
Grab and hold the per-AG data across a scrub run whenever relevant. This helps us avoid repeated trips through rcu and the radix tree in the repair code. Signed-off-by:
-
- 29 May, 2018 3 commits
-
-
Souptick Joarder authored
Use new return type vm_fault_t for fault handlers. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by:
-
Darrick J. Wong authored
In commit a6a781a5 ("xfs: have buffer verifier functions report failing address") the bad magic number return was ported incorrectly. Fixes: a6a781a5 Reported-by: syzbot+08ab33be0178b76851c8@syzkaller.appspotmail.com Signed-off-by:
-
Darrick J. Wong authored
In inode_init_always(), we clear the inode mapping flags, which clears any retained error (AS_EIO, AS_ENOSPC) bits. Unfortunately, we do not also clear wb_err, which means that old mapping errors can leak through to new inodes. This is crucial for the XFS inode allocation path because we recycle old in-core inodes and we do not want error state from an old file to leak into the new file. This bug was discovered by running generic/036 and generic/047 in a loop and noticing that the EIOs generated by the collision of direct and buffered writes in generic/036 would survive the remount between 036 and 047, and get reported to the fsyncs (on different files!) in generic/047. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
Brian Foster <bfoster@redhat.com>
-
- 17 May, 2018 1 commit
-
-
Omar Sandoval authored
generic_swapfile_activate() doesn't allow holes, so we should be consistent here. This is also a bit safer: if the user creates a swapfile with, say, truncate -s $SIZE followed by mkswap, they should really get an error and not much less swap space than they expected. swapon(8) will error out before calling swapon(2) if the file has holes, anyways. Fixes: 9d93388b0afe ("iomap: add a swapfile activation function") Reviewed-by:Omar Sandoval <osandov@fb.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
- 16 May, 2018 1 commit
-
-
Omar Sandoval authored
Currently, for an invalid swap file, we print the same error message regardless of the reason. This isn't very useful for an admin, who will likely want to know why exactly they can't use their swap file. So, let's add specific error messages for each reason, and also move the bdev check after the flags checks, since the latter are more fundamental. Reviewed-by:
-
