Most of the GICv3 emulation code that deals with SGIs now has to be
aware of the v4.1 capabilities in order to benefit from it.

Add such support, keyed on the interrupt having the hw flag set and
being a SGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-19-maz@kernel.org

As GICv4.1 understands the life cycle of doorbells (instead of
just randomly firing them at the most inconvenient time), just
enable them at irq_request time, and be done with it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-18-maz@kernel.org

Now that we have HW-accelerated SGIs being delivered to VPEs, it
becomes required to map the VPEs on all ITSs instead of relying
on the lazy approach that we would use when using the ITS-list
mechanism.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-17-maz@kernel.org

Add the SGI configuration entry point for KVM to use.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-16-maz@kernel.org

Allocate per-VPE SGIs when initializing the GIC-specific part of the
VPE data structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-15-maz@kernel.org

In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.

This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org

Just like for vLPIs, there is some configuration information that cannot
be directly communicated through the normal irqchip API, and we have to
use our good old friend set_vcpu_affinity as a side-band communication
mechanism.

This is used to configure group and priority for a given vSGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-13-maz@kernel.org

To implement the get/set_irqchip_state callbacks (limited to the
PENDING state), we have to use a particular set of hacks:

- Reading the pending state is done by using a pair of new redistributor
  registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts
  state to be retrieved.
- Setting the pending state is done by generating it as we'd otherwise do
  for a guest (writing to GITS_SGIR).
- Clearing the pending state is done by emitting a VSGI command with the
  "clear" bit set.

This requires some interesting locking though:
- When talking to the redistributor, we must make sure that the VPE
  affinity doesn't change, hence taking the VPE lock.
- At the same time, we must ensure that nobody accesses the same
  redistributor's GICR_VSGIR registers for a different VPE, which
  would corrupt the reading of the pending bits. We thus take the
  per-RD spinlock. Much fun.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-12-maz@kernel.org

Implement mask/unmask for virtual SGIs by calling into the
configuration helper.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-11-maz@kernel.org

The GICv4.1 ITS has yet another new command (VSGI) which allows
a VPE-targeted SGI to be configured (or have its pending state
cleared). Add support for this command and plumb it into the
activate irqdomain callback so that it is ready to be used.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-10-maz@kernel.org

Since GICv4.1 has the capability to inject 16 SGIs into each VPE,
and that I'm keen not to invent too many specific interfaces to
manipulate these interrupts, let's pretend that each of these SGIs
is an actual Linux interrupt.

For that matter, let's introduce a minimal irqchip and irqdomain
setup that will get fleshed up in the following patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-9-maz@kernel.org

One of the new features of GICv4.1 is to allow virtual SGIs to be
directly signaled to a VPE. For that, the ITS has grown a new
64kB page containing only a single register that is used to
signal a SGI to a given VPE.

Add a second mapping covering this new 64kB range, and take this
opportunity to limit the original mapping to 64kB, which is enough
to cover the span of the ITS registers.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-8-maz@kernel.org

Tell KVM that we support v4.1. Nothing uses this information so far.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-7-maz@kernel.org

The GICv4.1 spec says that it is CONTRAINED UNPREDICTABLE to write to
any of the GICR_INV{LPI,ALL}R registers if GICR_SYNCR.Busy == 1.

To deal with it, we must ensure that only a single invalidation can
happen at a time for a given redistributor. Add a per-RD lock to that
effect and take it around the invalidation/syncr-read to deal with this.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-6-maz@kernel.org

In GICv4.1, we emulate a guest-issued INVALL command by a direct write
to GICR_INVALLR.  Before we finish the emulation and go back to guest,
let's make sure the physical invalidate operation is actually completed
and no stale data will be left in redistributor. Per the specification,
this can be achieved by polling the GICR_SYNCR.Busy bit (to zero).
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200302092145.899-1-yuzenghui@huawei.com
Link: https://lore.kernel.org/r/20200304203330.4967-5-maz@kernel.org

Before GICv4.1, all operations would be serialized with the affinity
changes by virtue of using the same ITS command queue. With v4.1, things
change, as invalidations (and a number of other operations) are issued
using the redistributor MMIO frame.

We must thus make sure that these redistributor accesses cannot race
against aginst the affinity change, or we may end-up talking to the
wrong redistributor.

To ensure this, we expand the irq_to_cpuid() helper to take a spinlock
when the LPI is mapped to a vLPI (a new per-VPE lock) on each operation
that requires mutual exclusion.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-4-maz@kernel.org

In a system that is only sparsly populated with CPUs, we can end-up with
redistributors structures that are not initialized. Let's make sure we
don't try and access those when iterating over them (in this case when
checking we have a L2 VPE table).

Fixes: 4e6437f1 ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-3-maz@kernel.org

To allow the direct injection of SGIs into a guest, the GICv4.1
architecture has to sacrifice the Active state so that SGIs look
a lot like LPIs (they are injected by the same mechanism).

In order not to break existing software, the architecture gives
offers guests OSs the choice: SGIs with or without an active
state. It is the hypervisors duty to honor the guest's choice.

For this, the architecture offers a discovery bit indicating whether
the GIC supports GICv4.1 SGIs (GICD_TYPER2.nASSGIcap), and another
bit indicating whether the guest wants Active-less SGIs or not
(controlled by GICD_CTLR.nASSGIreq).

A hypervisor not supporting GICv4.1 SGIs would leave nASSGIcap
clear, and a guest not knowing about GICv4.1 SGIs (or definitely
wanting an Active state) would leave nASSGIreq clear (both being
thankfully backward compatible with older revisions of the GIC).

Since Linux is perfectly happy without an active state on SGIs,
inform the hypervisor that we'll use that if offered.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-2-maz@kernel.org

Pull ext4 fixes from Ted Ts'o:
 "Two more bug fixes (including a regression) for 5.6"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
  jbd2: fix data races at struct journal_head

Pull KVM fixes from Paolo Bonzini:
 "More bugfixes, including a few remaining "make W=1" issues such as too
  large frame sizes on some configurations.

  On the ARM side, the compiler was messing up shadow stacks between EL1
  and EL2 code, which is easily fixed with __always_inline"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: check descriptor table exits on instruction emulation
  kvm: x86: Limit the number of "kvm: disabled by bios" messages
  KVM: x86: avoid useless copy of cpufreq policy
  KVM: allow disabling -Werror
  KVM: x86: allow compiling as non-module with W=1
  KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis
  KVM: Introduce pv check helpers
  KVM: let declaration of kvm_get_running_vcpus match implementation
  KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter
  arm64: Ask the compiler to __always_inline functions used by KVM at HYP
  KVM: arm64: Define our own swab32() to avoid a uapi static inline
  KVM: arm64: Ask the compiler to __always_inline functions used at HYP
  kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
  KVM: arm/arm64: Fix up includes for trace.h

KVM emulates UMIP on hardware that doesn't support it by setting the
'descriptor table exiting' VM-execution control and performing
instruction emulation. When running nested, this emulation is broken as
KVM refuses to emulate L2 instructions by default.

Correct this regression by allowing the emulation of descriptor table
instructions if L1 hasn't requested 'descriptor table exiting'.

Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode")
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull i2c fixes from Wolfram Sang:
 "I2C has three driver bugfixes for you. We agreed on the Mac regression
  to go in via I2C"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  macintosh: therm_windtunnel: fix regression when instantiating devices
  i2c: altera: Fix potential integer overflow
  i2c: jz4780: silence log flood on txabrt

If sbi->s_flex_groups_allocated is zero and the first allocation fails
then this code will crash.  The problem is that "i--" will set "i" to
-1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1
is type promoted to unsigned and becomes UINT_MAX.  Since UINT_MAX
is more than zero, the condition is true so we call kvfree(new_groups[-1]).
The loop will carry on freeing invalid memory until it crashes.

Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access")
Reviewed-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Removing attach_adapter from this driver caused a regression for at
least some machines. Those machines had the sensors described in their
DT, too, so they didn't need manual creation of the sensor devices. The
old code worked, though, because manual creation came first. Creation of
DT devices then failed later and caused error logs, but the sensors
worked nonetheless because of the manually created devices.

When removing attach_adaper, manual creation now comes later and loses
the race. The sensor devices were already registered via DT, yet with
another binding, so the driver could not be bound to it.

This fix refactors the code to remove the race and only manually creates
devices if there are no DT nodes present. Also, the DT binding is updated
to match both, the DT and manually created devices. Because we don't
know which device creation will be used at runtime, the code to start
the kthread is moved to do_probe() which will be called by both methods.

Fixes: 3e7bed52 ("macintosh: therm_windtunnel: drop using attach_adapter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201723Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org # v4.19+

journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/r/20200222043111.2227-1-cai@lca.pwSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull SCSI fixes from James Bottomley:
 "Four small fixes.

  Three are in drivers for fairly obvious bugs. The fourth is a set of
  regressions introduced by the compat_ioctl changes because some of the
  compat updates wrongly replaced .ioctl instead of .compat_ioctl"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places
  scsi: zfcp: fix wrong data and display format of SFP+ temperature
  scsi: sd_sbc: Fix sd_zbc_report_zones()
  scsi: libfc: free response frame from GPN_ID

Pull PCI fixes from Bjorn Helgaas:

 - Fix build issue on 32-bit ARM with old compilers (Marek Szyprowski)

 - Update MAINTAINERS for recent Cadence driver file move (Lukas
   Bulwahn)

* tag 'pci-v5.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Correct Cadence PCI driver path
  PCI: brcmstb: Fix build on 32bit ARM platforms with older compilers

Pull block fixes from Jens Axboe:

 - Passthrough insertion fix (Ming)

 - Kill off some unused arguments (John)

 - blktrace RCU fix (Jan)

 - Dead fields removal for null_blk (Dongli)

 - NVMe polled IO fix (Bijan)

* tag 'block-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  nvme-pci: Hold cq_poll_lock while completing CQEs
  blk-mq: Remove some unused function arguments
  null_blk: remove unused fields in 'nullb_cmd'
  blktrace: Protect q->blk_trace with RCU
  blk-mq: insert passthrough request into hctx->dispatch directly

Pull io_uring fixes from Jens Axboe:

 - Fix for a race with IOPOLL used with SQPOLL (Xiaoguang)

 - Only show ->fdinfo if procfs is enabled (Tobias)

 - Fix for a chain with multiple personalities in the SQEs

 - Fix for a missing free of personality idr on exit

 - Removal of the spin-for-work optimization

 - Fix for next work lookup on request completion

 - Fix for non-vec read/write result progation in case of links

 - Fix for a fileset references on switch

 - Fix for a recvmsg/sendmsg 32-bit compatability mode

* tag 'io_uring-5.6-2020-02-28' of git://git.kernel.dk/linux-block:
  io_uring: fix 32-bit compatability with sendmsg/recvmsg
  io_uring: define and set show_fdinfo only if procfs is enabled
  io_uring: drop file set ref put/get on switch
  io_uring: import_single_range() returns 0/-ERROR
  io_uring: pick up link work on submit reference drop
  io-wq: ensure work->task_pid is cleared on init
  io-wq: remove spin-for-work optimization
  io_uring: fix poll_list race for SETUP_IOPOLL|SETUP_SQPOLL
  io_uring: fix personality idr leak
  io_uring: handle multiple personalities in link chains

Pull NVMe fix from Keith.

* 'nvme-5.6-rc4' of git://git.infradead.org/nvme:
  nvme-pci: Hold cq_poll_lock while completing CQEs

Pull ACPI fixes from Rafael Wysocki:
 "Fix a couple of configuration issues in the ACPI watchdog (WDAT)
  driver (Mika Westerberg) and make it possible to disable that driver
  at boot time in case it still does not work as expected (Jean
  Delvare)"

* tag 'acpi-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: watchdog: Set default timeout in probe
  ACPI: watchdog: Fix gas->access_width usage
  ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
  ACPI: watchdog: Allow disabling WDAT at boot

Pull power management fixes from Rafael Wysocki:
 "Fix a recent cpufreq initialization regression (Rafael Wysocki),
  revert a devfreq commit that made incompatible changes and broke user
  land on some systems (Orson Zhai), drop a stale reference to a
  document that has gone away recently (Jonathan Neuschäfer), and fix a
  typo in a hibernation code comment (Alexandre Belloni)"

* tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Fix policy initialization for internal governor drivers
  Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
  PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
  Documentation: power: Drop reference to interface.rst

Pull zonefs fixes from Damien Le Moal:
 "Two fixes in here:

   - Revert the initial decision to silently ignore IOCB_NOWAIT for
     asynchronous direct IOs to sequential zone files. Instead, return
     an error to the user to signal that the feature is not supported
     (from Christoph)

   - A fix to zonefs Kconfig to select FS_IOMAP to avoid build failures
     if no other file system already selected this option (from
     Johannes)"

* tag 'zonefs-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: select FS_IOMAP
  zonefs: fix IOCB_NOWAIT handling

Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.6, take #1

- Fix compilation on 32bit
- Move  VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline

In older version of systemd(219), at boot time, udevadm is called with :
	/usr/bin/udevadm trigger --type=devices --action=add"

This program generates an echo "add" in /sys/devices/system/cpu/cpu<x>/uevent,
leading to the "kvm: disabled by bios" message in case of your Bios disabled
the virtualization extensions.

On a modern system running up to 256 CPU threads, this pollutes the Kernel logs.

This patch offers to ratelimit this message to avoid any userspace program triggering
this uevent printing this message too often.

This patch is only a workaround but greatly reduce the pollution without
breaking the current behavior of printing a message if some try to instantiate
KVM on a system that doesn't support it.

Note that recent versions of systemd (>239) do not have trigger this behavior.

This patch will be useful at least for some using older systemd with recent Kernels.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

* pm-sleep:
  PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
  Documentation: power: Drop reference to interface.rst

* pm-devfreq:
  Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"

struct cpufreq_policy is quite big and it is not a good idea
to allocate one on the stack.  Just use cpufreq_cpu_get and
cpufreq_cpu_put which is even simpler.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Restrict -Werror to well-tested configurations and allow disabling it
via Kconfig.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Compile error with CONFIG_KVM_INTEL=y and W=1:

  CC      arch/x86/kvm/vmx/vmx.o
arch/x86/kvm/vmx/vmx.c:68:32: error: 'vmx_cpu_id' defined but not used [-Werror=unused-const-variable=]
   68 | static const struct x86_cpu_id vmx_cpu_id[] = {
      |                                ^~~~~~~~~~
cc1: all warnings being treated as errors

When building with =y, the MODULE_DEVICE_TABLE macro doesn't generate a
reference to the structure (or any code at all).  This makes W=1 compiles
unhappy.

Wrap both in a #ifdef to avoid the issue.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
[Do the same for CONFIG_KVM_AMD. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>