- 09 Aug, 2017 6 commits
-
-
Heiko Carstens authored
Split the vmcp header file and move the device driver internal structure to the C file, and move the ioctl definitions to the uapi directory. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
If memory is fragmented it is unlikely that large order memory allocations succeed. This has been an issue with the vmcp device driver since a long time, since it requires large physical contiguous memory ares for large responses. To hopefully resolve this issue make use of the contiguous memory allocator (cma). This patch adds a vmcp specific vmcp cma area with a default size of 4MB. The size can be changed either via the VMCP_CMA_SIZE config option at compile time or with the "vmcp_cma" kernel parameter (e.g. "vmcp_cma=16m"). For any vmcp response buffers larger than 16k memory from the cma area will be allocated. If such an allocation fails, there is a fallback to the buddy allocator. Signed-off-by:
-
Heiko Carstens authored
According to the CP Programming Services manual Diagnose Code 8 "Virtual Console Function" can be used in all addressing modes. Also the input and output buffers do not have a limitation which specifies they need to be below the 2GB line. This is true at least since z/VM 5.4. Therefore remove the sam31/64 instructions and allow for simple GFP_KERNEL allocations. This makes it easier to allocate a 1MB page if the user requested such a large return buffer. Signed-off-by:
-
Heiko Carstens authored
The vmcp device driver should return -EFAULT if get_user() fails, due to an invalid user space address. In addition the buffer size value from user space is passed unchecked to get_order(). The return value of get_order(0) undefined. Therefore explicitly test for zero before calling get_order() and also return -EFAULT if get_user() fails. Signed-off-by:
-
Heiko Carstens authored
Memory blocks that contain areas for the contiguous memory allocator (cma) should not be allowed to go offline. Otherwise this would render cma completely useless. This might make sense on other architectures where memory might be taken offline due to hardware errors, but not on architectures which support memory hotplug for load balancing. Signed-off-by:
-
Heiko Carstens authored
Add all the missing little helper functions like virt_to_pfn(), phys_to_page(), etc. While we had a couple of these helper functions like e.g. page_to_phys() the other functions were missing, which is quite annoying if one is looking for exactly such a function. Therefore finally add all those little helper functions. Signed-off-by:
-
- 03 Aug, 2017 4 commits
-
-
Bhumika Goyal authored
Add const to bin_attribute structures as they are only passed to the functions device_{remove/create}_bin_file. The corresponding arguments are of type const, so declare the structures to be const. Cross compiled for s390 architecture. Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Declare bin_attribute structure as const as it is only passed as an argument to the function sysfs_create_bin_file. This argument is of type const, so declare the structure as const. Cross compiled for s390 architecture. Signed-off-by:
-
Heiko Carstens authored
And another header file for which we can use the generic variant, even though it doesn't look obvious at first glance. Signed-off-by:
-
Heiko Carstens authored
clang doesn't like s390 specific inline assembler constraints. These are present in our arch specific uapi/asm/swab.h which again is required by some ebpf test cases. For current compiler versions the generic swab.h already makes use of gcc's builtin functions. Therefore we can simply remove our own header file and use the generic one. This will generate worse code if used with compilers before gcc 4.8, which has no __builtin_bswap16(); or before gcc v4.4, which has no __builtin_bswap[32|64](). For these cases a C implementation fallback would be used which generates more code, but is still correct (170KB extra code for gcc 4.3 with performance_defconfig). However given that we need (and want) to get rid of the inline assemblies anyway in order to be able to use clang, the above is just a minor drawback if old gcc compilers are used. With current compilers there is close to zero difference, except for three btrfs bit functions which generate more out-of-line code. The generated code looks still correct and also uses the s390 specific byteswap instructions. Reported-and-tested-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
-
- 02 Aug, 2017 2 commits
-
-
Heiko Carstens authored
Both header files only include the corresponding uapi header file and therefore can be removed. Signed-off-by:
-
Heiko Carstens authored
The name of bit 36 of the machine check interruption code is "guarded storage registers validity". Add the missing "validity" part in order to be consistent with all other comments, which include this piece of information. Signed-off-by:
-
- 26 Jul, 2017 23 commits
-
-
Martin Schwidefsky authored
Merge tag 'vfio-ccw-20170724' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features Pull vfio-ccw fix from Cornelia Huck: "A bugfix in the ccw translation code."
-
Martin Schwidefsky authored
The z14 machine introduces new mode of the next-instruction-access-intent NIAI instruction. With NIAI-8 it is possible to pin a cache-line on a CPU for a small amount of time, NIAI-7 releases the cache-line again. Finally NIAI-4 can be used to prevent the CPU to speculatively access memory beyond the compare-and-swap instruction to get the lock. Use these instruction in the spinlock code. Signed-off-by: -
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 11511 656 16 12183 2f97 drivers/s390/char/tape_core.o File size After adding 'const': text data bss dec hex filename 11575 592 16 12183 2f97 drivers/s390/char/tape_core.o Signed-off-by:
-
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 8069 816 16 8901 22c5 drivers/s390/char/raw3270.o File size After adding 'const': text data bss dec hex filename 8133 752 16 8901 22c5 drivers/s390/char/raw3270.o Signed-off-by:
-
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 6763 1216 0 7979 1f2b drivers/s390/net/qeth_l3_sys.o File size After adding 'const': text data bss dec hex filename 7019 960 0 7971 1f2b drivers/s390/net/qeth_l3_sys.o Signed-off-by:
-
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 1019 160 0 1179 49b drivers/s390/crypto/zcrypt_card.o File size After adding 'const': text data bss dec hex filename 1083 96 0 1179 49b drivers/s390/crypto/zcrypt_card.o Signed-off-by:
-
Arvind Yadav authored
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 1361 96 0 1457 5b1 s390/crypto/zcrypt_queue.o File size After adding 'const': text data bss dec hex filename 1425 32 0 1457 5b1 s390/crypto/zcrypt_queue.o Signed-off-by:
-
Martin Schwidefsky authored
Add detection for machine type 0x3906 and set the ELF platform name to z14. Add the miscellaneous-instruction-extension 2 facility to the list of facilities for z14. And allow to generate code that only runs on a z14 machine. Signed-off-by: -
Martin Schwidefsky authored
The TOD epoch extension adds 8 epoch bits to the TOD clock to provide a continuous clock after 2042/09/17. The store-clock-extended (STCKE) instruction will store the epoch index in the first byte of the 16 bytes stored by the instruction. The read_boot_clock64 and the read_presistent_clock64 functions need to take the additional bits into account to give the correct result after 2042/09/17. The clock-comparator register will stay 64 bit wide. The comparison of the clock-comparator with the TOD clock is limited to bytes 1 to 8 of the extended TOD format. To deal with the overflow problem due to an epoch change the clock-comparator sign control in CR0 can be used to switch the comparison of the 64-bit TOD clock with the clock-comparator to a signed comparison. The decision between the signed vs. unsigned clock-comparator comparisons is done at boot time. Only if the TOD clock is in the second half of a 142 year epoch the signed comparison is used. This solves the epoch overflow issue as long as the machine is booted at least once in an epoch. Signed-off-by: -
Martin Schwidefsky authored
Set a new option bit of the attach command to speed up memory hotplug. Signed-off-by: -
Heiko Carstens authored
Reviewed-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
-
Heiko Carstens authored
Reviewed-by:
-
Heiko Carstens authored
Add various defines like e.g. _REGION1_SHIFT to reflect the hardware mmu. We have quite a bit code that does not make use of the Linux memory management primitives but directly modifies page, segment and region values. Most of this is open-coded like e.g. "1UL << 53". In order to clean this up introduce a couple of new defines. The existing Linux memory management defines are changed, so the mapping to the hardware implementation is reflected. Reviewed-by:
-
Heiko Carstens authored
We have C code also outside of #ifndef __ASSEMBLY__. So these guards seem to be quite pointless and can be removed. Reviewed-by:
-
Heiko Carstens authored
Reviewed-by:
-
Martin Schwidefsky authored
Add the TLB flushing changes via a tip branch to ease merging with the KVM tree.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three small fixes. The transfer size fixes are actually correcting some performance drops on the hpsa and smartpqi cards. The cards actually have an internal cache for request speed up but bypass it for transfers > 1MB. Since 4.3 the efficiency of our merges has rendered the cache mostly unused, so limit transfers to under 1MB to recover the cache boost" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sg: fix static checker warning in sg_is_valid_dxfer scsi: smartpqi: limit transfer length to 1MB scsi: hpsa: limit transfer length to 1MB
-
git://git.infradead.org/users/hch/uuidLinus Torvalds authored
Pull uuid fixes from Christoph Hellwig: - add a missing "!" in the uuid tests - remove the last remaining user of the uuid_be type, and then the type and its helpers * tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid: uuid: remove uuid_be thunderbolt: use uuid_t instead of uuid_be uuid: fix incorrect uuid_equal conversion in test_uuid_test
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma mapping fixes from Christoph Hellwig: "split the global dma coherent pool from the per-device pool. This fixes a regression in the earlier 4.13 pull requests where the global pool would override a per-device CMA pool (Vladimir Murzin)" * tag 'dma-mapping-4.13-2' of git://git.infradead.org/users/hch/dma-mapping: ARM: NOMMU: Wire-up default DMA interface dma-coherent: introduce interface for default DMA pool
-
- 25 Jul, 2017 5 commits
-
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull JFS fixes from David Kleikamp. * tag 'jfs-4.13' of git://github.com/kleikamp/linux-shaggy: jfs: preserve i_mode if __jfs_set_acl() fails jfs: Don't clear SGID when inheriting ACLs jfs: atomically read inode size
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - regression fix (missing IRQs) for devices that require 'always poll' quirk, from Dmitry Torokhov - new device ID addition to Ortek driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: ortek: add one more buggy device HID: usbhid: fix "always poll" quirk
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Three bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: set change and reference bit on lazy key enablement s390: chp: handle CRW_ERC_INIT for channel-path status change s390/perf: fix problem state detection
-
Martin Schwidefsky authored
Signed-off-by: -
Martin Schwidefsky authored
Signed-off-by:
-
