- 06 Dec, 2011 24 commits
-
-
Jesse Barnes authored
This is a core mode setting structure that deserves a little verbiage. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Jesse Barnes authored
We never used initial_x/y or the force_encoder_id, so drop those fields and proide a basic description of the others. Really, the ELD bits belong in drm_display_info rather than directly in the connector, but that's a separate cleanup. Signed-off-by:
-
Jesse Barnes authored
Just some basic comments about the place and function of the structure and fields. Signed-off-by:
-
Jesse Barnes authored
Just basic verbiage. Signed-off-by:
-
Jesse Barnes authored
Remove stale entries and update with the latest stuff. Signed-off-by:
-
Jesse Barnes authored
Doesn't really belong here anyway. Signed-off-by:
-
Dave Airlie authored
This merges a topic branch containing patches from Alan for the GMA500 driver. * drm-gma500-alancox: gma500: Oaktrail BIOS handling gma500: Fix oaktrail probing part 1 gma500: Be smarter about layout gma500: gtt based hardware scrolling console gma500: frame buffer locking gma500: Fix backlight crash gma500: kill bogus code gma500: Convert spaces to tabs in accel_2d.c. gma500: do a pass over the FIXME tags gma500: Add VBLANK support for Poulsbo hardware gma500: Don't enable MSI on Poulsbo gma500: Only register interrupt handler for poulsbo hardware gma500: kill virtual mapping support gma500: Move the API gma500: kill off NUM_PIPE define gma500: Rename the ioctls to avoid clashing with the legacy drivers drm/gma500: begin pruning dead bits of API
-
Alan Cox authored
Now that we pull the right BIOS data out of the hat we need to use it when doing our panel setup. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
The Oaktrail platform does not use the GCT/VBT format that is used by the Moorestowm (non PC legacy) equivalent device. It uses the BIOS tables which means an opregion and the like. The current code uses the wrong table which breaks things like the Fujitsu q550 tablets. Fix the table usage as a first step. The problem was found and diagnosed by Chia-I Wu Signed-off-by:
-
Alan Cox authored
If we can't fit a page aligned display stride then it's not the end of the world for a normal font, so try half a page and work down sizes. Signed-off-by:
-
Alan Cox authored
Add support for GTT based scrolling. Instead of pushing bits around we simply use the GTT to change the mappings. This provides us with a very fast way to scroll the display providing we have enough memory to allocate on 4K line boundaries. In practice this seems to be the case except for very big displays such as HDMI, and the usual configurations are netbooks/tablets. Signed-off-by:
-
Alan Cox authored
If we are the console then a printk can hit us with a spin lock held (and in fact the kernel will do its best to take the console printing lock). In that case we cannot politely sleep when synching after an accelerated op but must behave obnoxiously to be sure of getting the bits out. Signed-off-by:
-
Alan Cox authored
Initial changes to get backlight behaviour we want and to fix backlight crashes on suspend/resume paths. [Note: on some boxes this will now produce a warning about the backlight, this isn't a regression it's an unfixed but non harmful case I still need to nail] Signed-off-by:
-
Alan Cox authored
During the power split ups and work a chunk of code escaped into the Poulsbo code path which it isn't for. On some devices such as the Dell mini-10 this causes problems. Signed-off-by:
-
Akshay Joshi authored
Convert the spaces within the accel_2d.c file to tabs in order to comply with the coding style of the kernel. Signed-off-by:
Akshay Joshi <me@akshayjoshi.com> [Trimmed to subset relevant to current tree] Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Patrik Jakobsson authored
Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Patrik Jakobsson authored
Chipset reports MSI capabilities for Poulsbo even though it isn't really there. Signed-off-by:
-
Patrik Jakobsson authored
First step in adding proper irq handling. We'll start with poulsbo support so make sure other chips don't touch drm_irq_install(). Signed-off-by:
-
Alan Cox authored
This isn't actually usable - we simply don't have the vmap space on a 32bit system to do this stunt. Instead we will rely on the low level drivers limiting the console resolution as before. The real fix is for someone to write a page table aware version of the framebuffer console blit functions. Good university student project perhaps.. Signed-off-by:
-
Alan Cox authored
Finally move the API where it can be seen Signed-off-by:
-
Alan Cox authored
We don't want this external in case someone adds more to the hardware. We want it out of the ABI. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
At this point we won't add an external set of definitions. We want to get everything out before we admit to a public API beyond the standardised ones. Signed-off-by:
-
- 01 Dec, 2011 1 commit
-
-
Ville Syrjälä authored
Name the formats as DRM_FORMAT_X instead of DRM_FOURCC_X. Use consistent names, especially for the RGB formats. Component order and byte order are now strictly specified for each format. The RGB format naming follows a convention where the components names and sizes are listed from left to right, matching the order within a single pixel from most significant bit to least significant bit. The YUV format names vary more. For the 4:2:2 packed formats and 2 plane formats use the fourcc. For the three plane formats the name includes the plane order and subsampling information using the standard subsampling notation. Some of those also happen to match the official fourcc definition. The fourccs for for all the RGB formats and some of the YUV formats I invented myself. The idea was that looking at just the fourcc you get some idea what the format is about without having to decode it using some external reference. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 29 Nov, 2011 2 commits
-
-
Dave Airlie authored
This is used by nearly everyone including vmwgfx which doesn't generally use the fb helper. Signed-off-by: -
Dave Airlie authored
Commit 308e5bcb ("drm: add an fb creation ioctl that takes a pixel format v5") missed one spot needing to be fixed up in the __BIG_ENDIAN case. Fixes build error: drivers/gpu/drm/radeon/radeon_fb.c: In function 'radeonfb_create_pinned_object': drivers/gpu/drm/radeon/radeon_fb.c:144:18: error: 'struct drm_mode_fb_cmd2' has no member named 'bpp' Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 28 Nov, 2011 3 commits
-
-
Ilija Hadzic authored
fops field in drm_driver is a pointer to file_operations struct, not embedded structure Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by:
-
Ilija Hadzic authored
psb_gfx.mod.c is a generated file and should not be revision controlled Signed-off-by:
-
Dave Airlie authored
This takes over the staging change into the mainline driver. Fixes -next part one. Signed-off-by:
-
- 25 Nov, 2011 1 commit
-
-
Jesse Barnes authored
Here's a patch to move things over to the new addfb2 interfaces at least. Signed-off-by:
-
- 16 Nov, 2011 9 commits
-
-
Dave Airlie authored
* drm-gma500-alanc: gma500: Now connect up to the DRM build to finish the job gma500: fixup build versus latest header changes. gma500: Add support for Cedarview gma500: Add Oaktrail support gma500: Add Poulsbo support gma500: Add the core DRM files and headers gma500: Add the i2c bus support gma500: Add the glue to the various BIOS and firmware interfaces gma500: Add device framework gma500: introduce the framebuffer support code gma500: introduce the GTT and MMU handling logic gma500: GEM and GEM glue gma500: Move the basic driver out of staging
-
Alan Cox authored
Signed-off-by:
-
Dave Airlie authored
Signed-off-by: -
Alan Cox authored
Again this is similar but has some differences so we have a set of plug in support. This does make the driver bigger than is needed in some respects but the tradeoff for maintainability is huge. Signed-off-by:
-
Alan Cox authored
Oaktrail (GMA600) is found on some tablet/slate PC type systems. It's a bit different to the GMA500 but similar enough it makes sense to plug it into the same driver. Signed-off-by:
-
Alan Cox authored
This provides the specific code for Poulsbo, some of which is also used for the later chipsets. We support the GTT, the 2D engine (for console), and the display setup/management. We do not support 3D or the video overlays. In theory enough public info is available to do the video overlay work but that represents a large task. Framebuffer X will run nicely with this but do *NOT* use the VESA X server at the same time as KMS. With a Dell mini 10 things like Xfce4 are nice and usable even when compositing as the CPU has a good path to the memory. Signed-off-by:
-
Alan Cox authored
Not really a nice way to split this up further for submission. This provides all the DRM interfacing logic, the headers and relevant glue. Signed-off-by:
-
Alan Cox authored
Again this might be a candidate for sharing later. Signed-off-by:
-
Alan Cox authored
Some of this should one day become a library shared by i915 and gma500 I suspct. Best however to deal with that later once it is all nice and stably merged. Signed-off-by:
-
