- 21 Feb, 2016 7 commits
-
-
Victor Dodon authored
The US_DEBUGPX macro uses printk without specifying a kernel log level, so the default kernel log level is used, which may not match LOGLEVEL_DEBUG used in usb_stor_dbg. Remove the macro and use usb_store_dbg instead. Signed-off-by:
Victor Dodon <printesoi@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Penkler authored
When the device is disconnected poll waiters were not being woken. Changes for v2: - add commit summary - add Fixes and Reported-by tags Fixes: eb6b92ec ("Add support for receiving USBTMC USB488 SRQ notifications via poll/select") Reported-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Dave Penkler <dpenkler@gmail.com> Signed-off-by:
-
Simon Horman authored
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Simon Horman authored
Make use of ARCH_RENESAS in place of ARCH_SHMOBILE. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by:
-
Alan authored
The write value is 8bit, but currently writing a larger number (eg a doubled digit) is not errored but instead gets cast and sets off an action probably undesired. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Oliver Neukum authored
To allow for and clean handling of signals an URB is introduced. Signed-off-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
-
Oliver Neukum authored
Shares the cleanup code between all probe failure paths, instead of having per-failure cleanup at each point in the function. Signed-off-by:
-
- 20 Feb, 2016 1 commit
-
-
Greg Kroah-Hartman authored
This reverts commit 4b61b4f2. As reported by Oliver, this change was unnecessary. Reported-by:
-
- 15 Feb, 2016 32 commits
-
-
Oliver Neukum authored
Some devices I got show an inability to operate right after power on if they are already connected. They are beyond recovery if the descriptors are requested multiple times. So in case of a timeout we rather bail early and reset again. But it must be done only on the first loop lest we get into a reset/time out spiral that can be overcome with a retry. This patch is a rework of a patch that fell through the cracks. http://www.spinics.net/lists/linux-usb/msg103263.htmlSigned-off-by:
-
Saurabh Sengar authored
Added iounmap inorder to free memory mapped to pointer before returning Signed-off-by:
Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by:
-
Steinar H. Gunderson authored
Add a new interface for userspace to preallocate memory that can be used with usbfs. This gives two primary benefits: - Zerocopy; data no longer needs to be copied between the userspace and the kernel, but can instead be read directly by the driver from userspace's buffers. This works for all kinds of transfers (even if nonsensical for control and interrupt transfers); isochronous also no longer need to memset() the buffer to zero to avoid leaking kernel data. - Once the buffers are allocated, USB transfers can no longer fail due to memory fragmentation; previously, long-running programs could run into problems finding a large enough contiguous memory chunk, especially on embedded systems or at high rates. Memory is allocated by using mmap() against the usbfs file descriptor, and similarly deallocated by munmap(). Once memory has been allocated, using it as pointers to a bulk or isochronous operation means you will automatically get zerocopy behavior. Note that this also means you cannot modify outgoing data until the transfer is complete. The same holds for data on the same cache lines as incoming data; DMA modifying them at the same time could lead to your changes being overwritten. There's a new capability USBDEVFS_CAP_MMAP that userspace can query to see if the running kernel supports this functionality, if just trying mmap() is not acceptable. Largely based on a patch by Markus Rechberger with some updates. The original patch can be found at: http://sundtek.de/support/devio_mmap_v0.4.diffSigned-off-by:
Steinar H. Gunderson <sesse@google.com> Signed-off-by:
Markus Rechberger <mrechberger@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `isp1362_probe': /home/vegard/linux/drivers/usb/host/isp1362-hcd.c:2668: undefined reference to `devm_ioremap_resource' Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `oxu_drv_probe': /home/vegard/linux/drivers/usb/host/oxu210hp-hcd.c:3821: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `pxa_udc_probe': /home/vegard/linux/drivers/usb/gadget/udc/pxa27x_udc.c:2430: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `ohci_platform_probe': /home/vegard/linux/drivers/usb/host/ohci-platform.c:246: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
warning: (USB_APPLEDISPLAY) selects BACKLIGHT_LCD_SUPPORT which has unmet direct dependencies (HAS_IOMEM) Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `pxa_udc_probe': /home/vegard/linux/drivers/usb/gadget/udc/pxa27x_udc.c:2430: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `musb_probe': /home/vegard/linux/drivers/usb/musb/musb_core.c:2304: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `fotg210_hcd_probe': /home/vegard/linux/drivers/usb/host/fotg210-hcd.c:5637: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `xhci_plat_probe': /home/vegard/linux/drivers/usb/host/xhci-plat.c:160: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `ehci_platform_probe': /home/vegard/linux/drivers/usb/host/ehci-platform.c:282: undefined reference to `devm_ioremap_resource' drivers/built-in.o: In function `oxu_drv_probe': /home/vegard/linux/drivers/usb/host/oxu210hp-hcd.c:3821: undefined reference to `devm_ioremap_resource' drivers/built-in.o: In function `isp1362_probe': /home/vegard/linux/drivers/usb/host/isp1362-hcd.c:2668: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
drivers/built-in.o: In function `dwc2_driver_probe': /home/vegard/linux/drivers/usb/dwc2/platform.c:491: undefined reference to `devm_ioremap_resource' Signed-off-by:
-
Vegard Nossum authored
CC drivers/usb/host/xhci-mtk.o drivers/usb/host/xhci-mtk.c:135:12: warning: ‘xhci_mtk_host_disable’ defined but not used [-Wunused-function] static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk) ^ drivers/usb/host/xhci-mtk.c:313:13: warning: ‘usb_wakeup_enable’ defined but not used [-Wunused-function] static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk) ^ drivers/usb/host/xhci-mtk.c:321:13: warning: ‘usb_wakeup_disable’ defined but not used [-Wunused-function] static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk) ^ CC drivers/usb/host/sl811-hcd.o drivers/usb/host/sl811-hcd.c: In function ‘sl811h_remove’: drivers/usb/host/sl811-hcd.c:1607:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(sl811->data_reg); ^ drivers/usb/host/sl811-hcd.c: In function ‘sl811h_probe’: drivers/usb/host/sl811-hcd.c:1669:3: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] addr_reg = ioremap(addr->start, 1); ^ drivers/usb/host/sl811-hcd.c:1669:12: warning: assignment makes pointer from integer without a cast [enabled by default] addr_reg = ioremap(addr->start, 1); ^ drivers/usb/host/sl811-hcd.c:1675:12: warning: assignment makes pointer from integer without a cast [enabled by default] data_reg = ioremap(data->start, 1); ^ Signed-off-by: -
Vegard Nossum authored
CC drivers/usb/c67x00/c67x00-drv.o drivers/usb/c67x00/c67x00-drv.c: In function ‘c67x00_drv_probe’: drivers/usb/c67x00/c67x00-drv.c:148:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] c67x00->hpi.base = ioremap(res->start, resource_size(res)); ^ drivers/usb/c67x00/c67x00-drv.c:148:19: warning: assignment makes pointer from integer without a cast [enabled by default] c67x00->hpi.base = ioremap(res->start, resource_size(res)); ^ drivers/usb/c67x00/c67x00-drv.c:185:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(c67x00->hpi.base); ^ Signed-off-by: -
Vegard Nossum authored
CC drivers/usb/musb/tusb6010.o drivers/usb/musb/tusb6010.c: In function ‘tusb_musb_init’: drivers/usb/musb/tusb6010.c:1133:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] sync = ioremap(mem->start, resource_size(mem)); ^ drivers/usb/musb/tusb6010.c:1133:7: warning: assignment makes pointer from integer without a cast [enabled by default] sync = ioremap(mem->start, resource_size(mem)); ^ drivers/usb/musb/tusb6010.c:1162:4: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(sync); ^ Signed-off-by: -
Vegard Nossum authored
CC drivers/usb/host/r8a66597-hcd.o drivers/usb/host/r8a66597-hcd.c: In function ‘r8a66597_remove’: drivers/usb/host/r8a66597-hcd.c:2401:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(r8a66597->reg); ^ drivers/usb/host/r8a66597-hcd.c: In function ‘r8a66597_probe’: drivers/usb/host/r8a66597-hcd.c:2447:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] reg = ioremap(res->start, resource_size(res)); ^ drivers/usb/host/r8a66597-hcd.c:2447:6: warning: assignment makes pointer from integer without a cast [enabled by default] reg = ioremap(res->start, resource_size(res)); ^ Signed-off-by: -
Vegard Nossum authored
drivers/usb/host/xhci-mvebu.c: In function ‘xhci_mvebu_mbus_init_quirk’: drivers/usb/host/xhci-mvebu.c:58:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] base = ioremap(res->start, resource_size(res)); ^ drivers/usb/host/xhci-mvebu.c:58:7: warning: assignment makes pointer from integer without a cast [enabled by default] base = ioremap(res->start, resource_size(res)); ^ drivers/usb/host/xhci-mvebu.c:69:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(base); ^ Signed-off-by:Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Vegard Nossum authored
drivers/usb/gadget/udc/m66592-udc.c: In function ‘m66592_remove’: drivers/usb/gadget/udc/m66592-udc.c:1538:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(m66592->reg); ^ drivers/usb/gadget/udc/m66592-udc.c: In function ‘m66592_probe’: drivers/usb/gadget/udc/m66592-udc.c:1577:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] reg = ioremap(res->start, resource_size(res)); ^ drivers/usb/gadget/udc/m66592-udc.c:1577:6: warning: assignment makes pointer from integer without a cast [enabled by default] reg = ioremap(res->start, resource_size(res)); ^ Signed-off-by: -
Vegard Nossum authored
drivers/usb/gadget/udc/net2272.c: In function ‘net2272_remove’: drivers/usb/gadget/udc/net2272.c:2232:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(dev->base_addr); ^ drivers/usb/gadget/udc/net2272.c: In function ‘net2272_plat_probe’: drivers/usb/gadget/udc/net2272.c:2650:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration] dev->base_addr = ioremap_nocache(base, len); ^ drivers/usb/gadget/udc/net2272.c:2650:17: warning: assignment makes pointer from integer without a cast [enabled by default] dev->base_addr = ioremap_nocache(base, len); ^ Signed-off-by: -
Vegard Nossum authored
drivers/usb/host/isp116x-hcd.c: In function ‘isp116x_remove’: drivers/usb/host/isp116x-hcd.c:1552:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] iounmap(isp116x->data_reg); ^ drivers/usb/host/isp116x-hcd.c: In function ‘isp116x_probe’: drivers/usb/host/isp116x-hcd.c:1604:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] addr_reg = ioremap(addr->start, resource_size(addr)); ^ drivers/usb/host/isp116x-hcd.c:1604:11: warning: assignment makes pointer from integer without a cast [enabled by default] addr_reg = ioremap(addr->start, resource_size(addr)); ^ drivers/usb/host/isp116x-hcd.c:1613:11: warning: assignment makes pointer from integer without a cast [enabled by default] data_reg = ioremap(data->start, resource_size(data)); ^ Signed-off-by: -
Robert Jarzmik authored
In several drivers in the pxa architecture, it was found that the platform_get_irq() was not propagated. This breaks the the device-tree probe deferral path, if -EPROBE_DEFER is returned. Unfortunately, the error return in this case is transformed into -ENXIO, breaking the deferral mechanism. Even if in this specific case the driver was not broken, because the interrupt controller is always probed before drivers, propagate the proper return code. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Oliver Neukum authored
This should cut down latencies and waste if the tty layer writes single bytes. Signed-off-by: Oliver Neukum >oneukum@suse.com> Signed-off-by: -
Oliver Neukum authored
This updates my email. Signed-off-by:
-
Mathias Nyman authored
The transfer burst count (TBC) field in the Isoc TRB does not fit the new larger burst count available for USB 3.1 SSP Isoc tranfers. xhci 1.1 solved this by reusing the TD size field for transfer burst count. The Mult field was outgrown as well. xhci 1.1 controllers can calculate Mult itself and is not set if the new layout is used. xhci 1.1 controllers that support the new Isoc TRB format expose a Extended TBC Capability (ETC). To take the new format into use the xhci host controller driver needs to set a Extended TBC Enable (ETE) bit. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
Clean up xhci_queue_isoc_tx() and helpers to prepare them for USB 3.1 and xhci 1.1 isoc TRB changes. Only functional change is adding xhci version 1.1 to the BEI flag check toghether with xhci version 1.0. Both versions behave the same. Signed-off-by:
-
Mathias Nyman authored
SuperSpeedPlus doubled the number of transactions per service interval the isoc endpoints supports. To support this, xhci 1.1 added Large ESIT Capability (LEC), which takes into use new bits in the endpoint context to fit the parameters. If xhci supports LEC, and the device has a SuperSpeedPlus Isoc companion descriptor then take into use the high bits of max esit payload, and skip calculating the Mult field as it wouldn't fit. LEC capable host will calculate the Mult based on other paramenters. Signed-off-by:
-
Mathias Nyman authored
xhci_endpoint_init() and helper functions were a bit messy. Adding the higher bandwidth SuperSpeedPlus Isoc support on top of it would make it even harder to read. No functional changes. Signed-off-by:
-
Mathias Nyman authored
USB 3.1 devices that support precision time measurement have an additional PTM cabaility descriptor as part of the full BOS descriptor Look for this descriptor while parsing the BOS descriptor, and store it in struct usb_hub_bos if it exists. Signed-off-by:
-
Mathias Nyman authored
USB 3.1 devices can return a new SuperSpeedPlus isoc endpoint companion descriptor for a isochronous endpoint that requires more than 48K bytes per Service Interval. The new descriptor immediately follows the old USB 3.0 SuperSpeed Endpoint Companion and will provide a new BytesPerInterval value. It is parsed and stored in struct usb_host_endpoint with the other endpoint related descriptors, and should be used by USB3.1 capable hosts to reserve bus time in the schedule. Signed-off-by:
-
Mathias Nyman authored
USB3.1 specifies a SuperSpeedPlus Isoc endpoint companion descriptor which is returned as part of the devices complete configuration descriptor. It contains number of bytes per service interval which is needed when reserving bus time in the schedule for transfers over 48K bytes per service interval. If bmAttributes bit 7 is set in the old SuperSpeed Endpoint Companion descriptor, it will be ollowed by the new SuperSpeedPlus Isoc Endpoint Companion descriptor. Signed-off-by:
-
