- 27 May, 2014 1 commit
-
-
Jean Delvare authored
The Renesas R-Car USB PHY driver only supports the R8A7778 and R8A7779, it isn't useful on other systems unless build testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 23 May, 2014 11 commits
-
-
Dan Carpenter authored
My previous patch introduced a bug which prevented this driver from loading. devm_ioremap_resource() has a call to devm_request_mem_region() which will fail because the address space is shared between this PHY driver and CI device controller driver. Fixes: 10f0577a ('usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()') Reported-by: "Ivan T. Ivanov" <iivanov@mm-sol.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Update device states according to ch9 in USB 2.0 specification Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
When tried to enable OTG FSM, we need to rebuild both kernel Image and modules, since there are some codes at gadget modules which are controlled by related configurations. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan T. Ivanov authored
Since commit 62bb84ed (usb: gadget: ci13xxx: convert to platform device) start address of the capability registers is not passed correctly to udc_probe(). Fix this. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan T. Ivanov authored
Allows controller to be specified via device tree. Pass PHY phandle specified in DT to core driver. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ivan T. Ivanov authored
Document device tree binding information as required by the Qualcomm USB controller. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
The field PLLDIVVALUE of register PHY_CTRL_1 selects the reference clock source for the PHY: 00 = sysclock uses 19.2 MHz 01 = sysclock uses 24 MHz 10 = sysclock uses 26 MHz 11 = sysclock uses 27 MHz The reset value for this field is 10 according to the reference manual, and even though this reset value works for mx53, it does not work for mx51. So instead of relying on the reset value for the PLLDIVVALUE field, explicitly set it to 01 so that a 24MHz clock can be selected for the PHY and allowing both mx51 and mx53 to have USB OTG port functional. Succesfully tested 'g_ether' on a imx51-babbage and on a imx53-qsb boards. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
The otg queue work include operations: one is disable interrupt, another one is call kernel queue work API. Many codes do this operation, using one inline function to instead of them. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Delete useless code Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Chen authored
Update TODO list Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usbGreg Kroah-Hartman authored
Felipe writes: usb: patches for v3.16 merge window Not a lot here during this merge window. Mostly we just have the usual miscellaneous patches (removal of unnecessary prints, proper dependencies being added to Kconfig, build warning fixes, new device ID, etc. Other than those, the only important new features are the new support for OS Strings which should help Linux Gadget Drivers behave better under MS Windows. Also Babble Recovery implementation for MUSB on AM335x. Lastly, we also have ARCH_QCOM PHY support though phy-msm. Signed-of-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/phy/phy-mv-u3d-usb.c
-
- 20 May, 2014 11 commits
-
-
Mathias Nyman authored
Use one timer to control command timeout. start/kick the timer every time a command is completed and a new command is waiting, or a new command is added to a empty list. If the timer runs out, then tag the current command as "aborted", and start the xhci command abortion process. Previously each function that submitted a command had its own timer. If that command timed out, a new command structure for the command was created and it was put on a cancel_cmd_list list, then a pci write to abort the command ring was issued. when the ring was aborted, it checked if the current command was the one to be canceled, later when the ring was stopped the driver got ownership of the TRBs in the command ring, compared then to the TRBs in the cancel_cmd_list, and turned them into No-ops. Now, instead, at timeout we tag the status of the command in the command queue to be aborted, and start the ring abortion. Ring abortion stops the command ring and gives control of the commands to us. All the aborted commands are now turned into No-ops. If the ring is already stopped when the command times outs its not possible to start the ring abortion, in this case the command is turnd to No-op right away. All these changes allows us to remove the entire cancel_cmd_list code. The functions waiting for a command to finish no longer have their own timeouts. They will wait either until the command completes normally, or until the whole command abortion is done. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
Remove the per-device command list and handle_cmd_in_cmd_wait_list() and use the completion and status variables found in the command structure in the global command list. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
Create a list to store command structures, add a structure to it every time a command is submitted, and remove it from the list once we get a command completion event matching the command. Callers that wait for completion will free their command structures themselves. The other command structures are freed in the command completion event handler. Also add a check that prevents queuing commands if host is dying Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
To create a global command queue we require that each command put on the command ring is submitted with a command structure. Functions that queue commands and wait for completion need to allocate a command before submitting it, and free it once completed. The following command queuing functions need to be modified. xhci_configure_endpoint() xhci_address_device() xhci_queue_slot_control() xhci_queue_stop_endpoint() xhci_queue_new_dequeue_state() xhci_queue_reset_ep() xhci_configure_endpoint() xhci_configure_endpoint() could already be called with a command structure, and only xhci_check_maxpacket and xhci_check_bandwidth did not do so. These are changed and a command structure is now required. This change also simplifies the configure endpoint command completion handling and the "goto bandwidth_change" handling code can be removed. In some cases the command queuing function is called in interrupt context. These commands needs to be allocated atomically, and they can't wait for completion. These commands will in this patch be freed directly after queuing, but freeing will be moved to the command completion event handler in a later patch once we get the global command queue up.(Just so that we won't leak memory in the middle of the patch set) Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sarah Sharp authored
xHCI host controllers may only support a limited number of device slot IDs, which is usually far less than the theoretical maximum number of devices (255) that the USB specifications advertise. This is frustrating to consumers that expect to be able to plug in a large number of devices. Add a print statement when the Enable Slot command fails to show how many devices the host supports. We can't change hardware manufacturer's design decisions, but hopefully we can save customers a little bit of time trying to debug why their host mysteriously fails when too many devices are plugged in. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Amund Hov <Amund.Hov@silabs.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Gordeev authored
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabio Estevam authored
Using the IS_ENABLED() macro can make the code shorter and easier to read. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Williams authored
Save someone else the debug cycles of figuring out why a driver's transfer request is failing or causing undefined system behavior. Buffers submitted for dma must come from GFP allocated / DMA-able memory. Return -EAGAIN matching the return value for dma_mapping_error() cases. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Wang authored
This patch fix wrong port number reported when trying to enable/disable USB2.0 hardware LPM. Signed-off-by: Lin Wang <lin.x.wang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: for 3.16 merge window Bunch of fixes and a new driver for Exynos5 USB 3.0 PHY.
-
Greg Kroah-Hartman authored
We need these USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 16 May, 2014 2 commits
-
-
Matwey V. Kornilov authored
The value of the revision is stored in musb->tusb_revision, so don't re-read it every time. Exporting tusb_get_revision is not needed anymore, so the dependency loop between tusb6010 and tusb6010_omap is resolved. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Matwey V. Kornilov authored
Add field to store tusb6010 revision value. Read the revision at the startup and store to the variable. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 15 May, 2014 8 commits
-
-
Ricardo Ribalda Delgado authored
When DEBUG is enabled driver->driver.name is accessed, but driver can be NULL [ 174.411689] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 174.429043] RIP: 0010:[<ffffffffa0131ca3>] [<ffffffffa0131ca3>] net2280_stop+0xa3/0x100 [net2280] [ 174.457910] Call Trace: [ 174.459503] [<ffffffffa00dd92a>] usb_gadget_remove_driver+0x5a/0xb0 [udc_core] [ 174.462693] [<ffffffffa00ddd84>] usb_del_gadget_udc+0xb4/0x110 [udc_core] [ 174.464316] [<ffffffffa012e2bf>] net2280_remove+0x2f/0x1c0 [net2280] Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Laurent Pinchart authored
The vb2 queue timestamp_flags field must be set by drivers, as enforced by a WARN_ON in vb2_queue_init. The UVC gadget driver failed to do so. This resulted in the following warning. [ 2.104371] g_webcam gadget: uvc_function_bind [ 2.105567] ------------[ cut here ]------------ [ 2.105567] ------------[ cut here ]------------ [ 2.106779] WARNING: CPU: 0 PID: 1 at drivers/media/v4l2-core/videobuf2-core.c:2207 vb2_queue_init+0xa3/0x113() Fix it. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Laurent Pinchart authored
The UVC gadget driver doesn't support interlaced video but left the buffer field uninitialized. Set it to V4L2_FIELD_NONE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Laurent Pinchart authored
The wall time clock isn't useful for applications as it can jump around due to time adjustement. Switch to the monotonic clock. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Liviu Dudau authored
adding new device id for SMSC USB334x devices. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
In some circumstances when g_audio is being unloaded there happens an endless loop in udc driver. It has happend on a board with s3c-hsotg. If there are requests in endpoint's queue, they are completed in a loop. But completing them might cause appending new requests to the queue. This patch causes agdev_iso_complete() to return immediately if request's status is -ESHUTDOWN. If it does not return immediately, then although the current request is removed from the queue, a new one is appended to the queue, so the above mentioned loop cannot end. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andy Shevchenko authored
This fixes a bug when dwc3_pci_register_phys() fails and leaves device enabled. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andy Shevchenko authored
First usage of ret variable will re-write initial value. Thus, there is no need to initialize it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 14 May, 2014 7 commits
-
-
Andrzej Pietrasiewicz authored
Add handling of OS Extended Properties descriptors from configfs interface. One kind of "OS Descriptors" are "Extended Properties" descriptors, which need to be specified per interface or per group of interfaces described by an IAD. This patch adds support for creating subdirectories in interface.<n> directory located in the function's directory. Names of subdirectories created become names of properties. Each property contains two attributes: "type" and "data". The type can be a numeric value 1..7 while data is a blob interpreted depending on the type specified. The types are: 1 - unicode string 2 - unicode string with environment variables 3 - binary 4 - little-endian 32-bit 5 - big-endian 32-bit 6 - unicode string with a symbolic link 7 - multiple unicode strings Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
Added handling of OS Descriptors support for f_rndis. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
Add handling of OS Extended Compatibility descriptors from configfs interface. Hosts which expect the "OS Descriptors" ask only for configurations @ index 0, but linux-based USB devices can provide more than one configuration. This patch adds marking one of gadget's configurations the configuration to be reported at index 0, regardless of the actual sequence of usb_add_config invocations used for adding the configurations. The configuration is selected by creating a symbolic link pointing to it from the "os_desc" directory located at the top of a gadget's directory hierarchy. One kind of "OS Descriptors" are "Extended Compatibility Descriptors", which need to be specified per interface. This patch adds interface.<n> directory in function's configfs directory to represent each interface defined by the function. Each interface's directory contains two attributes: "compatible_id" and "sub_compatible_id", which represent 8-byte strings to be reported to the host as the "Compatible ID" and "Sub Compatible ID". Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
Add handling of OS String extension from the configfs interface. A directory "os_desc" is added at the top level of a gadget's directories hierarchy. In the "os_desc" directory there are three attributes: "use", "b_vendor_code" and "qw_sign". If "use" contains "0" the OS string is not reported to the host. "b_vendor_code" contains a one-byte value which is used for custom per-device and per-interface requests. "qw_sign" contains an identifier to be reported as the "OS String" proper. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
In order for usb functions to expose OS descriptors they need to be made aware of OS descriptors. This involves extending the "options" structure and setting up appropriate associations. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
There is a custom (non-USB IF) extension to the USB standard: http://msdn.microsoft.com/library/windows/hardware/gg463182 They grant permission to use the specification - there is "Microsoft OS Descriptor Specification License Agreement" under the link mentioned above, and its Section 2 "Grant of License", letter (b) reads: "Patent license. Microsoft hereby grants to You a nonexclusive, royalty-free, nontransferable, worldwide license under Microsoft’s patents embodied solely within the Specification and that are owned or licensable by Microsoft to make, use, import, offer to sell, sell and distribute directly or indirectly to Your Licensees Your Implementation. You may sublicense this patent license to Your Licensees under the same terms and conditions." The said extension is maintained by Microsoft for Microsoft. Yet it is fairly common for various devices to use it, and a popular proprietary operating system expects devices to provide "OS descriptors", so Linux-based USB gadgets whishing to be able to talk to a variety of operating systems should be able to provide the "OS descriptors". This patch adds optional support for gadgets whishing to expose the so called "OS Feature Descriptors", that is "Extended Compatibility ID" and "Extended Properties". Hosts which do request "OS descriptors" from gadgets do so during the enumeration phase and before the configuration is set with SET_CONFIGURATION. What is more, those hosts never ask for configurations at indices other than 0. Therefore, gadgets whishing to provide "OS descriptors" must designate one configuration to be used with this kind of hosts - this is what os_desc_config is added for in struct usb_composite_dev. There is an additional advantage to it: if a gadget provides "OS descriptors" and designates one configuration to be used with such non-USB-compliant hosts it can invoke "usb_add_config" in any order because the designated configuration will be reported to be at index 0 anyway. This patch also adds handling vendor-specific requests addressed at device or interface and related to handling "OS descriptors". Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Andrzej Pietrasiewicz authored
There is a custom (non-USB IF) extension to the USB standard: http://msdn.microsoft.com/library/windows/hardware/gg463182 They grant permission to use the specification - there is "Microsoft OS Descriptor Specification License Agreement" under the link mentioned above, and its Section 2 "Grant of License", letter (b) reads: "Patent license. Microsoft hereby grants to You a nonexclusive, royalty-free, nontransferable, worldwide license under Microsoft’s patents embodied solely within the Specification and that are owned or licensable by Microsoft to make, use, import, offer to sell, sell and distribute directly or indirectly to Your Licensees Your Implementation. You may sublicense this patent license to Your Licensees under the same terms and conditions." The said extension is maintained by Microsoft for Microsoft. Yet it is fairly common for various devices to use it, and a popular proprietary operating system expects devices to provide "OS descriptors", so Linux-based USB gadgets whishing to be able to talk to a variety of operating systems should be able to provide the "OS descriptors". This patch adds optional support for gadgets whishing to expose the so called "OS String" under index 0xEE of language 0. The contents of the string is generated based on the qw_sign array and b_vendor_code. Interested gadgets need to set the cdev->use_os_string flag, fill cdev->qw_sign with appropriate values and fill cdev->b_vendor_code with a value of their choice. This patch does not however implement responding to any vendor-specific USB requests. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-