- 09 Sep, 2020 14 commits
-
-
Vinicius Costa Gomes authored
The previous timestamping latency numbers were obtained by interpolating the i210 numbers with the i225 crystal clock value. That calculation was wrong. Use the correct values from real measurements. Fixes: 81b05520 ("igc: Add support for RX timestamping") Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Stefan Assmann authored
The for loop in i40e_set_vsi_promisc() reports errors via dev_err() but does not propagate the error up the call chain. Instead it continues the loop and potentially overwrites the reported error value. This results in the error being recorded in the log buffer, but the caller might never know anything went the wrong way. To avoid this situation i40e_set_vsi_promisc() needs to temporarily store the error after reporting it. This is still not optimal as multiple different errors may occur, so store the first error and hope that's the main issue. Fixes: 37d318d7 (i40e: Remove scheduling while atomic possibility) Reported-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
Stefan Assmann authored
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function ‘i40e_set_vsi_promisc’: drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1176:14: error: ‘aq_ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] i40e_status aq_ret; In case the code inside the if statement and the for loop does not get executed aq_ret will be uninitialized when the variable gets returned at the end of the function. Avoid this by changing num_vlans from int to u16, so aq_ret always gets set. Making this change in additional places as num_vlans should never be negative. Fixes: 37d318d7 ("i40e: Remove scheduling while atomic possibility") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Tested-by:
-
Ye Bin authored
clean follow coccicheck warning: net//hsr/hsr_netlink.c:94:8-42: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:87:30-57: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD net//hsr/hsr_netlink.c:79:29-53: WARNING avoid newline at end of message in NL_SET_ERR_MSG_MOD Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== net: skb_put_padto() fixes sysbot reported a bug in qrtr leading to use-after-free. First patch fixes the issue. Second patch addes __must_check attribute to avoid similar issues in the future. ==================== Signed-off-by: -
Eric Dumazet authored
skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
If skb_put_padto() returns an error, skb has been freed. Better not touch it anymore, as reported by syzbot [1] Note to qrtr maintainers : this suggests qrtr_sendmsg() should adjust sock_alloc_send_skb() second parameter to account for the potential added alignment to avoid reallocation. [1] BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline] BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline] BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline] BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316 CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 __skb_insert include/linux/skbuff.h:1907 [inline] __skb_queue_before include/linux/skbuff.h:2016 [inline] __skb_queue_tail include/linux/skbuff.h:2049 [inline] skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146 qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23 qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9 RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003 RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c Allocated by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461 slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518 slab_alloc mm/slab.c:3312 [inline] kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482 skb_clone+0x1b2/0x370 net/core/skbuff.c:1449 qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 4316: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free+0x82/0xf0 mm/slab.c:3693 __skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823 __skb_put_padto include/linux/skbuff.h:3233 [inline] skb_put_padto include/linux/skbuff.h:3252 [inline] qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] sock_write_iter+0x317/0x470 net/socket.c:998 call_write_iter include/linux/fs.h:1882 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0xa96/0xd10 fs/read_write.c:578 ksys_write+0x11b/0x220 fs/read_write.c:631 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88804d8ab3c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 0 bytes inside of 224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0) The buggy address belongs to the page: page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800 raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Fixes: ce57785b ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Carl Huang <cjhuang@codeaurora.org> Cc: Wen Gong <wgong@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Wei Wang authored
Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'ieee802154-for-davem-2020-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2020-09-08 An update from ieee802154 for your *net* tree. A potential memory leak fix for ca8210 from Liu Jian, a check on the return for a register read in adf7242 and finally a user after free fix in the softmac tx function from Eric found by syzkaller. ==================== Signed-off-by:
-
Jakub Kicinski authored
John's email has bounced and Thomas confirms he no longer works on ibmvnic. Signed-off-by:
-
Brian Vazquez authored
If CONFIG_IPV6=m, the IPV6 functions won't be found by the linker: ld: net/core/fib_rules.o: in function `fib_rules_lookup': fib_rules.c:(.text+0x606): undefined reference to `fib6_rule_match' ld: fib_rules.c:(.text+0x611): undefined reference to `fib6_rule_match' ld: fib_rules.c:(.text+0x68c): undefined reference to `fib6_rule_action' ld: fib_rules.c:(.text+0x693): undefined reference to `fib6_rule_action' ld: fib_rules.c:(.text+0x6aa): undefined reference to `fib6_rule_suppress' ld: fib_rules.c:(.text+0x6bc): undefined reference to `fib6_rule_suppress' make: *** [Makefile:1166: vmlinux] Error 1 Reported-by:
Sven Joachim <svenjoac@gmx.de> Fixes: b9aaec8f ("fib: use indirect call wrappers in the most common fib_rules_ops") Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
Brian Vazquez <brianvv@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: =================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Allow conntrack entries with l3num == NFPROTO_IPV4 or == NFPROTO_IPV6 only via ctnetlink, from Will McVicker. 2) Batch notifications to userspace to improve netlink socket receive utilization. 3) Restore mark based dump filtering via ctnetlink, from Martin Willi. 4) nf_conncount_init() fails with -EPROTO with CONFIG_IPV6, from Eelco Chaudron. 5) Containers fail to match on meta skuid and skgid, use socket user_ns to retrieve meta skuid and skgid. =================== Signed-off-by: -
Eric Dumazet authored
syzbot reported twice a lockdep issue in fib6_del() [1] which I think is caused by net->ipv6.fib6_null_entry having a NULL fib6_table pointer. fib6_del() already checks for fib6_null_entry special case, we only need to return earlier. Bug seems to occur very rarely, I have thus chosen a 'bug origin' that makes backports not too complex. [1] WARNING: suspicious RCU usage 5.9.0-rc4-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.5/8095: #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline] #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline] #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245 stack backtrace: CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline] fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline] call_netdevice_notifiers net/core/dev.c:2059 [inline] dev_close_many+0x30b/0x650 net/core/dev.c:1634 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261 rollback_registered net/core/dev.c:9329 [inline] unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410 unregister_netdevice include/linux/netdevice.h:2774 [inline] ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_user_mode_loop kernel/entry/common.c:163 [inline] exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 421842ed ("net/ipv6: Add fib6_null_entry") Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Since commit 845e0ebb ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning: ============================================ WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted -------------------------------------------- dhcpcd/323 is trying to acquire lock: ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 but task is already holding lock: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by dhcpcd/323: #0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180 Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master. We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses. There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice(). Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions. Fixes: 845e0ebb ("net: change addr_list_lock back to static key") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 08 Sep, 2020 7 commits
-
-
Eric Dumazet authored
syzbot reported a bug in ieee802154_tx() [1] A similar issue in ieee802154_xmit_worker() is also fixed in this patch. [1] BUG: KASAN: use-after-free in ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 Read of size 4 at addr ffff8880251a8c70 by task syz-executor.3/928 CPU: 0 PID: 928 Comm: syz-executor.3 Not tainted 5.9.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 ieee802154_tx+0x3d2/0x480 net/mac802154/tx.c:88 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45d5b9 Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc98e749c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000002ccc0 RCX: 000000000045d5b9 RDX: 0000000000000000 RSI: 0000000020007780 RDI: 000000000000000b RBP: 000000000118d020 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000118cfec R13: 00007fff690c720f R14: 00007fc98e74a9c0 R15: 000000000118cfec Allocated by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 slab_post_alloc_hook mm/slab.h:518 [inline] slab_alloc_node mm/slab.c:3254 [inline] kmem_cache_alloc_node+0x136/0x3e0 mm/slab.c:3574 __alloc_skb+0x71/0x550 net/core/skbuff.c:198 alloc_skb include/linux/skbuff.h:1094 [inline] alloc_skb_with_frags+0x92/0x570 net/core/skbuff.c:5771 sock_alloc_send_pskb+0x72a/0x880 net/core/sock.c:2348 packet_alloc_skb net/packet/af_packet.c:2837 [inline] packet_snd net/packet/af_packet.c:2932 [inline] packet_sendmsg+0x19fb/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 928: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kmem_cache_free.part.0+0x74/0x1e0 mm/slab.c:3693 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:622 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xcf/0x160 net/core/skbuff.c:832 __dev_kfree_skb_any+0x9c/0xc0 net/core/dev.c:3107 fakelb_hw_xmit+0x20e/0x2a0 drivers/net/ieee802154/fakelb.c:81 drv_xmit_async net/mac802154/driver-ops.h:16 [inline] ieee802154_tx+0x282/0x480 net/mac802154/tx.c:81 ieee802154_subif_start_xmit+0xbe/0xe4 net/mac802154/tx.c:130 __netdev_start_xmit include/linux/netdevice.h:4634 [inline] netdev_start_xmit include/linux/netdevice.h:4648 [inline] dev_direct_xmit+0x4e9/0x6e0 net/core/dev.c:4203 packet_snd net/packet/af_packet.c:2989 [inline] packet_sendmsg+0x2413/0x5290 net/packet/af_packet.c:3014 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:671 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2353 ___sys_sendmsg+0xf3/0x170 net/socket.c:2407 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2440 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880251a8c00 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 112 bytes inside of 224-byte region [ffff8880251a8c00, ffff8880251a8ce0) The buggy address belongs to the page: page:0000000062b6a4f1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x251a8 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0000435c88 ffffea00028b6c08 ffff8880a9055d00 raw: 0000000000000000 ffff8880251a80c0 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880251a8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880251a8b80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880251a8c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880251a8c80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff8880251a8d00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: 409c3b0c ("mac802154: tx: move stats tx increment") Signed-off-by:Stefan Schmidt <stefan@datenfreihafen.org>
-
Pablo Neira Ayuso authored
... instead of using init_user_ns. Fixes: 96518518 ("netfilter: add nftables") Tested-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Eelco Chaudron authored
The openvswitch module fails initialization when used in a kernel without IPv6 enabled. nf_conncount_init() fails because the ct code unconditionally tries to initialize the netns IPv6 related bit, regardless of the build option. The change below ignores the IPv6 part if not enabled. Note that the corresponding _put() function already has this IPv6 configuration check. Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Martin Willi authored
conntrack mark based dump filtering may falsely skip entries if a mask is given: If the mask-based check does not filter out the entry, the else-if check is always true and compares the mark without considering the mask. The if/else-if logic seems wrong. Given that the mask during filter setup is implicitly set to 0xffffffff if not specified explicitly, the mark filtering flags seem to just complicate things. Restore the previously used approach by always matching against a zero mask is no filter mark is given. Fixes: cb8aa9a3 ("netfilter: ctnetlink: add kernel side filtering for dump") Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
Pablo Neira Ayuso authored
On x86_64, each notification results in one skbuff allocation which consumes at least 768 bytes due to the skbuff overhead. This patch coalesces several notifications into one single skbuff, so each notification consumes at least ~211 bytes, that ~3.5 times less memory consumption. As a result, this is reducing the chances to exhaust the netlink socket receive buffer. Rule of thumb is that each notification batch only contains netlink messages whose report flag is the same, nfnetlink_send() requires this to do appropriate delivery to userspace, either via unicast (echo mode) or multicast (monitor mode). The skbuff control buffer is used to annotate the report flag for later handling at the new coalescing routine. The batch skbuff notification size is NLMSG_GOODSIZE, using a larger skbuff would allow for more socket receiver buffer savings (to amortize the cost of the skbuff even more), however, going over that size might break userspace applications, so let's be conservative and stick to NLMSG_GOODSIZE. Reported-by:
-
Will McVicker authored
The indexes to the nf_nat_l[34]protos arrays come from userspace. So check the tuple's family, e.g. l3num, when creating the conntrack in order to prevent an OOB memory access during setup. Here is an example kernel panic on 4.14.180 when userspace passes in an index greater than NFPROTO_NUMPROTO. Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in:... Process poc (pid: 5614, stack limit = 0x00000000a3933121) CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483 Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM task: 000000002a3dfffe task.stack: 00000000a3933121 pc : __cfi_check_fail+0x1c/0x24 lr : __cfi_check_fail+0x1c/0x24 ... Call trace: __cfi_check_fail+0x1c/0x24 name_to_dev_t+0x0/0x468 nfnetlink_parse_nat_setup+0x234/0x258 ctnetlink_parse_nat_setup+0x4c/0x228 ctnetlink_new_conntrack+0x590/0xc40 nfnetlink_rcv_msg+0x31c/0x4d4 netlink_rcv_skb+0x100/0x184 nfnetlink_rcv+0xf4/0x180 netlink_unicast+0x360/0x770 netlink_sendmsg+0x5a0/0x6a4 ___sys_sendmsg+0x314/0x46c SyS_sendmsg+0xb4/0x108 el0_svc_naked+0x34/0x38 This crash is not happening since 5.4+, however, ctnetlink still allows for creating entries with unsupported layer 3 protocol number. Fixes: c1d10adb ("[NETFILTER]: Add ctnetlink port for nf_conntrack") Signed-off-by:
Will McVicker <willmcvicker@google.com> [pablo@netfilter.org: rebased original patch on top of nf.git] Signed-off-by:
-
Dexuan Cui authored
mlx5_suspend()/resume() keep the network interface, so during hibernation netvsc_unregister_vf() and netvsc_register_vf() are not called, and hence netvsc_resume() should call netvsc_vf_changed() to switch the data path back to the VF after hibernation. Note: after we close and re-open the vmbus channel of the netvsc NIC in netvsc_suspend() and netvsc_resume(), the data path is implicitly switched to the netvsc NIC. Similarly, netvsc_suspend() should not call netvsc_unregister_vf(), otherwise the VF can no longer be used after hibernation. For mlx4, since the VF network interafce is explicitly destroyed and re-created during hibernation (see mlx4_suspend()/resume()), hv_netvsc already explicitly switches the data path from and to the VF automatically via netvsc_register_vf() and netvsc_unregister_vf(), so mlx4 doesn't need this fix. Note: mlx4 can still work with the fix because in netvsc_suspend()/resume() ndev_ctx->vf_netdev is NULL for mlx4. Fixes: 0efeea5f ("hv_netvsc: Add the support of hibernation") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
- 07 Sep, 2020 7 commits
-
-
Taehee Yoo authored
This reverts commit 8d7e5dee. To protect netns id, the nsid_lock is used when netns id is being allocated and removed by peernet2id_alloc() and unhash_nsid(). The nsid_lock can be used in BH context but only spin_lock() is used in this code. Using spin_lock() instead of spin_lock_bh() can result in a deadlock in the following scenario reported by the lockdep. In order to avoid a deadlock, the spin_lock_bh() should be used instead of spin_lock() to acquire nsid_lock. Test commands: ip netns del nst ip netns add nst ip link add veth1 type veth peer name veth2 ip link set veth1 netns nst ip netns exec nst ip link add name br1 type bridge vlan_filtering 1 ip netns exec nst ip link set dev br1 up ip netns exec nst ip link set dev veth1 master br1 ip netns exec nst ip link set dev veth1 up ip netns exec nst ip link add macvlan0 link br1 up type macvlan Splat looks like: [ 33.615860][ T607] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 33.617194][ T607] 5.9.0-rc1+ #665 Not tainted [ ... ] [ 33.670615][ T607] Chain exists of: [ 33.670615][ T607] &mc->mca_lock --> &bridge_netdev_addr_lock_key --> &net->nsid_lock [ 33.670615][ T607] [ 33.673118][ T607] Possible interrupt unsafe locking scenario: [ 33.673118][ T607] [ 33.674599][ T607] CPU0 CPU1 [ 33.675557][ T607] ---- ---- [ 33.676516][ T607] lock(&net->nsid_lock); [ 33.677306][ T607] local_irq_disable(); [ 33.678517][ T607] lock(&mc->mca_lock); [ 33.679725][ T607] lock(&bridge_netdev_addr_lock_key); [ 33.681166][ T607] <Interrupt> [ 33.681791][ T607] lock(&mc->mca_lock); [ 33.682579][ T607] [ 33.682579][ T607] *** DEADLOCK *** [ ... ] [ 33.922046][ T607] stack backtrace: [ 33.922999][ T607] CPU: 3 PID: 607 Comm: ip Not tainted 5.9.0-rc1+ #665 [ 33.924099][ T607] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 33.925714][ T607] Call Trace: [ 33.926238][ T607] dump_stack+0x78/0xab [ 33.926905][ T607] check_irq_usage+0x70b/0x720 [ 33.927708][ T607] ? iterate_chain_key+0x60/0x60 [ 33.928507][ T607] ? check_path+0x22/0x40 [ 33.929201][ T607] ? check_noncircular+0xcf/0x180 [ 33.930024][ T607] ? __lock_acquire+0x1952/0x1f20 [ 33.930860][ T607] __lock_acquire+0x1952/0x1f20 [ 33.931667][ T607] lock_acquire+0xaf/0x3a0 [ 33.932366][ T607] ? peernet2id_alloc+0x3a/0x170 [ 33.933147][ T607] ? br_port_fill_attrs+0x54c/0x6b0 [bridge] [ 33.934140][ T607] ? br_port_fill_attrs+0x5de/0x6b0 [bridge] [ 33.935113][ T607] ? kvm_sched_clock_read+0x14/0x30 [ 33.935974][ T607] _raw_spin_lock+0x30/0x70 [ 33.936728][ T607] ? peernet2id_alloc+0x3a/0x170 [ 33.937523][ T607] peernet2id_alloc+0x3a/0x170 [ 33.938313][ T607] rtnl_fill_ifinfo+0xb5e/0x1400 [ 33.939091][ T607] rtmsg_ifinfo_build_skb+0x8a/0xf0 [ 33.939953][ T607] rtmsg_ifinfo_event.part.39+0x17/0x50 [ 33.940863][ T607] rtmsg_ifinfo+0x1f/0x30 [ 33.941571][ T607] __dev_notify_flags+0xa5/0xf0 [ 33.942376][ T607] ? __irq_work_queue_local+0x49/0x50 [ 33.943249][ T607] ? irq_work_queue+0x1d/0x30 [ 33.943993][ T607] ? __dev_set_promiscuity+0x7b/0x1a0 [ 33.944878][ T607] __dev_set_promiscuity+0x7b/0x1a0 [ 33.945758][ T607] dev_set_promiscuity+0x1e/0x50 [ 33.946582][ T607] br_port_set_promisc+0x1f/0x40 [bridge] [ 33.947487][ T607] br_manage_promisc+0x8b/0xe0 [bridge] [ 33.948388][ T607] __dev_set_promiscuity+0x123/0x1a0 [ 33.949244][ T607] __dev_set_rx_mode+0x68/0x90 [ 33.950021][ T607] dev_uc_add+0x50/0x60 [ 33.950720][ T607] macvlan_open+0x18e/0x1f0 [macvlan] [ 33.951601][ T607] __dev_open+0xd6/0x170 [ 33.952269][ T607] __dev_change_flags+0x181/0x1d0 [ 33.953056][ T607] rtnl_configure_link+0x2f/0xa0 [ 33.953884][ T607] __rtnl_newlink+0x6b9/0x8e0 [ 33.954665][ T607] ? __lock_acquire+0x95d/0x1f20 [ 33.955450][ T607] ? lock_acquire+0xaf/0x3a0 [ 33.956193][ T607] ? is_bpf_text_address+0x5/0xe0 [ 33.956999][ T607] rtnl_newlink+0x47/0x70 Acked-by:
Guillaume Nault <gnault@redhat.com> Fixes: 8d7e5dee ("netns: don't disable BHs when locking "nsid_lock"") Reported-by: syzbot+3f960c64a104eaa2c813@syzkaller.appspotmail.com Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Indentation and logic clearly show that this code is missing parenthesis. Fixes: 9f134573 ("ibmvnic fix NULL tx_pools and rx_tools issue at do_reset") Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in <linux/netdevice.h>: ../include/linux/netdevice.h:2158: warning: Function parameter or member 'xdp_state' not described in 'net_device' Fixes: 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in <linux/netdevice.h>: ../include/linux/netdevice.h:2158: warning: Function parameter or member 'proto_down_reason' not described in 'net_device' Fixes: 829eb208 ("rtnetlink: add support for protodown reason") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Two bug fixes. The first patch fixes AER recovery by reducing the time from several minutes to a more reasonable 20 - 30 seconds. The second patch fixes a possible NULL pointer crash during firmware reset. ==================== Signed-off-by: -
Vasundhara Volam authored
bnxt_fw_reset_task() which runs from a workqueue can race with bnxt_remove_one(). For example, if firmware reset and VF FLR are happening at about the same time. bnxt_remove_one() already cancels the workqueue and waits for it to finish, but we need to do this earlier before the devlink reporters are destroyed. This will guarantee that the devlink reporters will always be valid when bnxt_fw_reset_task() is still running. Fixes: b148bb23 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
When the driver goes through PCIe AER reset in error state, all firmware messages will timeout because the PCIe bus is no longer accessible. This can lead to AER reset taking many minutes to complete as each firmware command takes time to timeout. Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages when either firmware is in fatal error state or when pci_channel_offline() is true. It now takes a more reasonable 20 to 30 seconds to complete AER recovery. Fixes: b4fff207 ("bnxt_en: Do not send firmware messages if firmware is in error state.") Signed-off-by:
-
- 06 Sep, 2020 2 commits
-
-
Linus Walleij authored
When removing a port from a VLAN we are just erasing the member config for the VLAN, which is wrong: other ports can be using it. Just mask off the port and only zero out the rest of the member config once ports using of the VLAN are removed from it. Reported-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Parshuram Thombare authored
PAE bit of NCFGR register, when set, pauses transmission if a non-zero 802.3 classic pause frame is received. Fixes: 7897b071 ("net: macb: convert to phylink") Signed-off-by:
Parshuram Thombare <pthombar@cadence.com> Signed-off-by:
-
- 05 Sep, 2020 7 commits
-
-
Ganji Aravind authored
Pass the correct offset to clear the stale filter hit bytes counter. Otherwise, the counter starts incrementing from the stale information, instead of 0. Fixes: 12b276fb ("cxgb4: add support to create hash filters") Signed-off-by:
Ganji Aravind <ganji.aravind@chelsio.com> Signed-off-by:
-
Jakub Kicinski authored
Luo bin says: ==================== hinic: BugFixes The bugs fixed in this patchset have been present since the following commits: patch #1: Fixes: 00e57a6d ("net-next/hinic: Add Tx operation") patch #2: Fixes: 5e126e7c ("hinic: add firmware update support") ==================== Signed-off-by:
-
Luo bin authored
Firmware erases the entire flash region which may take several seconds before flashing, so we bump up the timeout to ensure this cmd won't return failure. Fixes: 5e126e7c ("hinic: add firmware update support") Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
We free memory regardless of the return value of SET_FUNC_STATE cmd in hinic_close function to avoid memory leak and this cmd may timeout when fw is busy with handling other cmds, so we bump up the timeout of this cmd to ensure it won't return failure. Fixes: 00e57a6d ("net-next/hinic: Add Tx operation") Signed-off-by:
-
Cong Wang authored
The following deadlock scenario is triggered by syzbot: Thread A: Thread B: tcf_idr_check_alloc() ... populate_metalist() rtnl_unlock() rtnl_lock() ... request_module() tcf_idr_check_alloc() rtnl_lock() At this point, thread A is waiting for thread B to release RTNL lock, while thread B is waiting for thread A to commit the IDR change with tcf_idr_insert() later. Break this deadlock situation by preloading ife modules earlier, before tcf_idr_check_alloc(), this is fine because we only need to load modules we need potentially. Reported-and-tested-by: syzbot+80e32b5d1f9923f8ace6@syzkaller.appspotmail.com Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Jing Xiangfeng authored
eni_init_one() misses to call pci_disable_device() in an error path. Jump to err_disable to fix it. Fixes: ede58ef2 ("atm: remove deprecated use of pci api") Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
-
Xie He authored
PVC devices are virtual devices in this driver stacked on top of the actual HDLC device. They are the devices normal users would use. PVC devices have two types: normal PVC devices and Ethernet-emulating PVC devices. When transmitting data with PVC devices, the ndo_start_xmit function will prepend a header of 4 or 10 bytes. Currently this driver requests this headroom to be reserved for normal PVC devices by setting their hard_header_len to 10. However, this does not work when these devices are used with AF_PACKET/RAW sockets. Also, this driver does not request this headroom for Ethernet-emulating PVC devices (but deals with this problem by reallocating the skb when needed, which is not optimal). This patch replaces hard_header_len with needed_headroom, and set needed_headroom for Ethernet-emulating PVC devices, too. This makes the driver to request headroom for all PVC devices in all cases. Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
- 04 Sep, 2020 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken because of a typo - Update defconfigs * tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Fix the loading of modules built with binutils-2.35. This version produces writable and executable .text.ftrace_trampoline section which is rejected by the kernel. - Remove the exporting of cpu_logical_map() as the Tegra driver has now been fixed and no longer uses this function. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE arm64: Remove exporting cpu_logical_map symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: "A few MIPS fixes: - fallthrough fallout fix - BMIPS fixes - MSA fix to avoid leaking MSA register contents - Loongson perf and cpu feature fix - SNI interrupt fix" * tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: SNI: Fix SCSI interrupt MIPS: add missing MSACSR and upper MSA initialization MIPS: perf: Fix wrong check condition of Loongson event IDs mips/oprofile: Fix fallthrough placement MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores MIPS: mm: BMIPS5000 has inclusive physical caches MIPS: Loongson64: Do not override watch and ejtag feature
-
