If DRM_FBDEV_EMULATION is not selected in the config then we can save a
bit of space by not including the framebuffer code.
Signed-off-by: John Keeping <john@metanate.com>

args->pitch and args->size may not be set by userspace, sometimes
userspace only malloc args and not memset args to zero, then
args->pitch and args->size is random, it is very danger to use
pitch/size on gem.

pitch's type is u32, and min_pitch's type is int, example,
pitch is 0xffffffff, then pitch < min_pitch return true, then gem will
alloc very very big bufffer, it would eat all the memory and cause kernel
crash.

Stop using pitch/size from args, calc them from other args.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

Signed-off-by: John Keeping <john@metanate.com>

As commented in drm_atomic_helper_wait_for_vblanks(), userspace relies
on cursor ioctls being unsynced.  Converting the rockchip driver to
atomic has significantly impacted cursor performance by making every
cursor update wait for vblank.

By skipping the vblank sync when the framebuffer has not changed (as is
done in drm_atomic_helper_wait_for_vblanks()) we can avoid this for the
common case of moving the cursor and only need to delay the cursor ioctl
when the cursor icon changes.

We cannot add the check on legacy_cursor_update since that results in
the cursor bo being unreferenced while the hardware may still be reading
it.  Fully supporting unsynced cursor updates is left for the future
when the atomic helper framework supports async updates.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>

The Rockchip driver cannot use drm_atomic_helper_wait_for_vblanks()
because it has hardware counters for neither vblanks nor scanlines.

In order to simplify re-implementing the functionality for this driver,
export the framebuffer_changed() helper so it can be reused.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The function can return negative value so it should be assigned to signed
variable.

The problem has been detected using patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>

Commit dbb3d944 (drm/rockchip: vop: move interrupt registers into
vop_data) introduced new macros for updating the interrupt control
registers but these always use the mask from the register definition
without refining it for the particular bits that are being changed.

This means that whenever we enable/disable a particular interrupt we end
up disabling all of the others as a side effect.
Signed-off-by: John Keeping <john@metanate.com>

Now rockchip_drm_vop.c is build into rockchipdrm.ko, so
no need to export following symbol anymore:
    rockchip_drm_dma_attach_device
    rockchip_drm_dma_detach_device
    rockchip_drm_dma_attach_device
    rockchip_drm_dma_detach_device
    rockchip_register_crtc_funcs
    rockchip_unregister_crtc_funcs
    rockchip_fb_get_gem_obj
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

rockchip_drm_vop's module init had moved to rockchip_vop_reg.c
so no need to build rockchip_drm_vop.ko
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>

Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next

misc i915 fixes all over the place.

* tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
  drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long.
  drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
  drm/i915: shut up gen8+ SDE irq dmesg noise, again
  drm/i915: Restore inhibiting the load of the default context
  drm/i915: Tune down rpm wakelock debug checks
  drm/i915: Avoid writing relocs with addresses in non-canonical form
  drm/i915: Move Braswell stop_machine GGTT insertion workaround

Since your main drm-next pull isn't out of the door yet I figured I might
as well flush out drm-misc instead of delaying for 4.6. It's really just
random stuff all over, biggest thing probably connector_mask tracking from
Maarten.

* tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits)
  drm/fb_cma_helper: Remove implicit call to disable_unused_functions
  drm/sysfs: use kobj_to_dev()
  drm/i915: Init power domains early in driver load
  drm: Do not set connector->encoder in drivers
  apple-gmux: Add initial documentation
  drm: move MODULE_PARM_DESC to other file
  drm/edid: index CEA/HDMI mode tables using the VIC
  drm/atomic: Remove drm_atomic_connectors_for_crtc.
  drm/i915: Update connector_mask during readout, v2.
  drm: Remove opencoded drm_gem_object_release_handle()
  drm: Do not set outparam on error during GEM handle allocation
  drm/docs: more leftovers from the big vtable documentation pile
  drm/atomic-helper: Reject legacy flips on a disabled pipe
  drm/atomic: add connector mask to drm_crtc_state.
  drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2.
  drm/atomic: Add __drm_atomic_helper_connector_reset, v2.
  drm/i915: Set connector_state->connector using the helper.
  drm: Use a normal idr allocation for the obj->name
  drm: Only bump object-reference count when adding first handle
  drm: Balance error path for GEM handle allocation
  ...

The drm_fbdev_cma_init function always calls the
drm_helper_disable_unused_functions. Since it's part of the usual probe
process, all the drivers using that helper will end up having their encoder
and CRTC disable functions called at probe if their device has not been
reported as enabled.

This could be fixed by reading out from the registers the current state of
the device if it is enabled, but even that will not handle the case where
the device is actually disabled.

Moreover, the drivers using the atomic modesetting expect that their enable
and disable callback to be called when the device is already enabled or
disabled (respectively).

We can however fix this issue by moving the call to
drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the
drivers needing it (all the drivers calling drm_fbdev_cma_init and not
using the atomic modesetting) explicitly call it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452785109-6172-14-git-send-email-maxime.ripard@free-electrons.comAcked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

this fixes the build on arm.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

 This 2nd pull request includes the following,
   - add configurable plane support and relevant cleanups.
   - fixup kernel panic issue at drm releasing.
   - remove unnecessary codes.

   This has been delayed to resolve a critical issue - which incurrs
   a kernel panic when driver is released - and review it.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: fix kernel panic issue at drm releasing
  drm/exynos: crtc: do not wait for the scanout completion
  drm/exynos: mixer: properly update all planes on the same vblank event
  drm/exynos: crtc: rework atomic_{begin,flush}
  drm/exynos: mixer: unify a check for video-processor window
  drm/exynos: mixer: also allow ARGB1555 and ARGB4444
  drm/exynos: mixer: refactor layer setup
  drm/exynos: mixer: remove all static blending setup
  drm/exynos: mixer: set window priority based on zpos
  drm/exynos: make zpos property configurable
  drm/exynos: rename zpos to index

etnaviv fixes.

* 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: fix workaround for GC500
  drm/etnaviv: unlock on error in etnaviv_gem_get_iova()

Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

new rockchip bits.

* 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip:
  drm: rockchip: Support Synopsys DW MIPI DSI
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  drm/rockchip: return a true clock rate to adjusted_mode

When the framebuffer is a vmwgfx dma buffer and a proxy surface is
created, the vmw_kms_update_proxy() function requires that the proxy
surface width and the framebuffer pitch are compatible, otherwise
display corruption occurs as seen in gnome-shell/native with software
3D. Since the framebuffer pitch is determined by user-space, allocate
a proxy surface the width of which is based on the framebuffer pitch
rather than on the framebuffer width.

Cc: <stable@vger.kernel.org>
Reported-by: Raphael Hertzog <buxy@kali.org>
Tested-by: Mati Aharoni <muts@kali.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module
would unconditionally throw a bug when checking for a held spinlock
in the command buffer code. Fix this by using a lockdep check.

Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The new debugfs initialization code fails to build when CONFIG_DEBUG_FS
is disabled:

In file included from /git/arm-soc/drivers/gpu/drm/nouveau/nouveau_drm.c:57:0:
drivers/gpu/drm/nouveau/nouveau_debugfs.h: In function 'nouveau_debugfs_init':
drivers/gpu/drm/nouveau/nouveau_debugfs.h:37:29: error: parameter name omitted
 nouveau_debugfs_init(struct nouveau_drm *)

This fixes the prototypes so we can build it again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b126a200 ("drm/nouveau/debugfs: we need a ctrl object for debugfs")
Signed-off-by: Dave Airlie <airlied@redhat.com>

v2: remove unneeded pci check
Signed-off-by: Karol Herbst <nouveau@karolherbst.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

A few more misc things for radeon and amdgpu for 4.5:
- TTM fixes for imported buffers
- amdgpu fixes to avoid -ENOMEM in CS ioctl
- CZ UVD and VCE clock force options for debugging video issues
- A couple of ACP prerequisites
- Misc fixes

* 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: validate duplicates first
  drm/amdgpu: move VM page tables to the LRU end on CS v2
  drm/ttm: add ttm_bo_move_to_lru_tail function v2
  drm/ttm: fix adding foreign BOs to the swap LRU
  drm/ttm: fix adding foreign BOs to the LRU during init v2
  drm/radeon: use kobj_to_dev()
  drm/amdgpu: use kobj_to_dev()
  drm/amdgpu/cz: force vce clocks when sclks are forced
  drm/amdgpu/cz: force uvd clocks when sclks are forced
  drm/amdgpu/cz: add code to enable forcing VCE clocks
  drm/amdgpu/cz: add code to enable forcing UVD clocks
  drm/amdgpu: fix lost sync_to if scheduler is enabled.
  drm/amd/powerplay: fix static checker warning for return meaningless value.
  drm/amdgpu: add irq domain support
  drm/amdgpu/cgs: add an interface to access PCI resources

Most VM BOs end up in the duplicates list, validate it
first make -ENOMEM less likely.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This makes it less likely to run into an ENOMEM because
VM page tables are evicted last.

v2: move the BOs in the LRU tail after validation
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This allows the drivers to move a BO to the end of the LRU
without removing and adding it again.

v2: Make it more robust, handle pinned and swapable BOs as well.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It doesn't make any sense to try to swap out imported BOs.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

If we import a BO with an external reservation object we don't
reserve/unreserve it. So we never add it to the LRU causing a possible
denial of service.

v2: fix typo in commit message
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCE DPM works similarly to SCLK DPM.  Add a similar interface
for VCE for forcing the VCE clocks.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

UVD DPM works similarly to SCLK DPM.  Add a similar interface
for UVD for forcing the UVD clocks.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

when scheduler is enabled, the semaphore isn't used at all.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

The return value should be either negative or zero, no positive.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Use kobj_to_dev() instead of open-coding it.

Link: http://patchwork.freedesktop.org/patch/msgid/3fea991541fbfc4ffece2c174adeb02cb9436c90.1452696179.git.geliangtang@163.comSigned-off-by: Geliang Tang <geliangtang@163.com>

Since

commit ac9b8236
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri Nov 27 18:55:26 2015 +0200

    drm/i915: Introduce a gmbus power domain

gmbus also needs the power domain infrastructure right from the start,
since as soon as we register the i2c controllers someone can use them.

v2: Adjust cleanup paths too (Chris).

v3: Rebase onto -nightly (totally bogus tree I had lying around) and
also move dpio init head (Ville).

v4: Ville instead suggested to move gmbus setup later in the sequence,
since it's only needed by the modeset code.

v5: Move even close to the actual user, right next to the comment that
states where we really need gmbus (and interrupts!).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: ac9b8236 ("drm/i915: Introduce a gmbus power domain")
Cc: stable@vger.kernel.org
References: http://www.spinics.net/lists/intel-gfx/msg83075.htmlSigned-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452682528-19437-1-git-send-email-daniel.vetter@ffwll.chSigned-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

An encoder is associated with a connector by the DRM core as a result of
setting up a configuration. Drivers using the atomic or legacy helpers
should never set up this link, even if it is a static one.

While at it, try to catch this kind of error in the future by adding a
WARN_ON() in drm_mode_connector_attach_encoder(). Note that this doesn't
cover all the cases, since drivers could set this up after attaching.
Drivers that use the atomic helpers will get a warning later on, though,
so hopefully the two combined cover enough to help people avoid this in
the future.

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Mark yao <mark.yao@rock-chips.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1447694393-24700-1-git-send-email-thierry.reding@gmail.com

Kernel and userspace are able to handle 4GB (1<<32) address space range,
but "A32 Stateless Model" is not. According to documentation, A32 accesses
are based on General State Base Address and bound checking is in place.
Because size field (instruction State Base Address) limitation, it is not
possible to address full 4GB memory region.

A32 Stateless Model is used by some libraries and without this patch, the
last page of 4GB address space is not accessible in 32bit processes.
Reported-by: Artur Harasimiuk <artur.harasimiuk@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452512367-23614-1-git-send-email-michel.thierry@intel.com
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 1892faa9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

This fixes a spurious warning from an integer overflow on 64-bits systems.
The function may return MAX_SCHEDULE_TIMEOUT which gets truncated to -1.

Explicitly handling this by casting to lret fixes it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-and-tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Andreas Reis <andreas.reis@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: 3c28ff22 ("i915: wait for fence in prepare_plane_fb")
Link: http://patchwork.freedesktop.org/patch/msgid/5666EEC8.2000403@linux.intel.com
(cherry picked from commit bcf8be27)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

This fixes reprobing of display connectors on resume.  After some
talking with danvet on IRC, I learned that calling
drm_helper_hpd_irq_event() does actually trigger a full reprobe of each
connector's status. It turns out this is the actual reason reprobing on
resume hasn't been working (this was observed on a T440s):

	- We call hpd_init()
	- We check each connector for a couple of things before marking
	  connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an
	  active encoder. Of course, a disconnected port won't have an
	  active encoder, so we don't add the flag to any of the
	  connectors.
	- We call drm_helper_hpd_irq_event()
	- drm_helper_irq_event() checks each connector for the
	  DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1,
	  so we skip reprobing each connector except that one.

In addition, we also now avoid setting connector->polled to
DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is
handled by the mst helpers. This is probably what was originally
intended to happen here.

Changes since V1:
* Use the explanation of the issue as the commit message instead
* Change the title of the commit, since this does more then just stop a
  check for an encoder now
* Add "Fixes" line for the patch that introduced this regression
* Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors

Changes since V2:
* Put patch changelog above Signed-off-by
* Follow Daniel Vetter's suggestion for making the code here a bit more
  legible

Fixes: 0e32b39c ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: stable@vger.kernel.org
Signed-off-by: Lyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1452181408-14777-1-git-send-email-cpaul@redhat.comSigned-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 07c51913)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>