Pull spi updates from Mark Brown:
 "As well as the usual driver updates and cleanups there's a few
  improvements to the core here:

   - The start of some improvements to factor out more of the SPI
     message loop into the core.  Right now this is just simplifying the
     code a bit but hopefully next time around we'll also have managed
     to roll out some noticable performance improvements which drivers
     can take advantage of.
   - Support for loading modules for ACPI enumerated SPI devices.
   - Managed registration for SPI controllers.
   - Helper for another common I/O pattern"

* tag 'spi-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (116 commits)
  spi/hspi: add device tree support
  spi: atmel: fix return value check in atmel_spi_probe()
  spi: spi-imx: only enable the clocks when we start to transfer a message
  spi/s3c64xx: Fix doubled clock disable on suspend
  spi/s3c64xx: Do not ignore return value of spi_master_resume/suspend
  spi: spi-mxs: Use u32 instead of uint32_t
  spi: spi-mxs: Don't set clock for each xfer
  spi: spi-mxs: Clean up setup_transfer function
  spi: spi-mxs: Remove check of spi mode bits
  spi: spi-mxs: Fix race in setup method
  spi: spi-mxs: Remove bogus setting of ssp clk rate field
  spi: spi-mxs: Remove full duplex check, spi core already does it
  spi: spi-mxs: Fix chip select control bits in DMA mode
  spi: spi-mxs: Fix extra CS pulses and read mode in multi-transfer messages
  spi: spi-mxs: Change flag arguments in txrx functions to bit flags
  spi: spi-mxs: Always clear INGORE_CRC, to keep CS asserted
  spi: spi-mxs: Remove mxs_spi_enable and mxs_spi_disable
  spi: spi-mxs: Always set LOCK_CS
  spi/s3c64xx: Add missing pm_runtime_put on setup fail
  spi/s3c64xx: Add missing pm_runtime_set_active() call in probe()
  ...

Pull regulator updates from Mark Brown:
 "Lots of driver updates here plus some nice new core features, the main
  one being the first:

   - Enable support for providing a dummy regulator when we know that
     one must exist for the device to be functional.  This makes it much
     easier to add regulator support to drivers since we don't require
     that the machine integration for all systems using the device be
     updated to provide regulators.
   - Substantial reduction in the amount of busy waiting done while
     waiting for enables to complete.
   - Allow MFDs to distribute regulator supplies to child devices so we
     don't have to expose the internal structure of MFDs outside of the
     driver.
   - Managed registeration for regulators"

* tag 'regulator-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (113 commits)
  regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4
  regulator: s5m8767: Modify parse_dt function to parse data related to ramp
  regulator: da9052: Revert se apply_[reg|bit] with regmap based voltage_sel operations
  mfd: arizona: Specify supply mappings for Arizona CODECs
  mfd: Allow mapping regulator supplies to MFD device from children
  regulator: core: Add ability to create a lookup alias for supply
  regulator: tps65910: Fix checkpatch issue
  regulator: tps65023: Fix checkpatch issue
  regulator: tps6105x: Fix checkpatch issue
  regulator: mc13783: Fix checkpatch issue
  regulator: max8997: Fix checkpatch issue
  regulator: lp3971: Fix checkpatch issue
  regulator: fixed: Fix checkpatch issue
  regulator: anatop: Fix checkpatch issue
  regulator: Add REGULATOR_LINEAR_RANGE macro
  regulator: Remove max_uV from struct regulator_linear_range
  regulator: ti-abb: Fix operator precedence typo
  regulator: tps65910: get regulators node from parent node only
  regulator: tps6586x: get regulators node from parent node only
  regulator: tps65090: get regulators node from parent node only
  ...

Pull regmap updates from Mark Brown:
 "The main thing this time around has been some improvments to async
  I/O.

   - Cleaned up the async I/O support and extended it to allow single
     register writes more easily.  This is now used where possible for
     internally generated I/O, providing performance improvements for
     devices that can do async I/O.
   - An API for issuing a sequence of register writes as a single
     operation.  Some devices and buses can take advantage of this to do
     the I/O faster.
   - Addition of regmap_field APIs which help drivers for devices with
     repeated IPs or which move registers around between revisions to
     share helpers.
   - Support for SPMI buses"

* tag 'regmap-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add SPMI support
  regmap: debugfs: Fix a boot time crash with early regmap init
  regmap: irq: clear status when disable irq
  regmap: Only send a single buffer for async I/O if writing one register
  regmap: spi: Handle async writes of only one buffer
  regmap: new API regmap_multi_reg_write() definition
  regmap: Use async I/O during cache sync
  regmap: Use async I/O for patch application
  regmap: Fix regmap_bulk_write single-rw mutex deadlock
  regmap: Provide asynchronous write and update bits operations
  regmap: Simplify the initiation of async I/O
  regmap: Don't generate gather writes for single register raw writes
  regmap: Cache async work structures
  regmap: add helper macro to set min/max range of register
  regmap: Add regmap_fields APIs
  regmap: add regmap_field_update_bits()

Pull hwmon updates from Guenter Roeck:
 "Introduce new hwmon API functions hwmon_device_register_with_groups
  and devm_hwmon_device_register_with_groups, and convert several
  drivers to use the new API.

  Add support for EMC1404, EMC1424, LTC2977, LTC2978A, LM25063 to
  existing drivers

  Various cleanups in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: (w83793) Clean up a signedness issue
  hwmon: (nct6775) Remove an unused variable
  hwmon: (emc1403) Add support for EMC1404 and EMC1424
  hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (pmbus/ltc2978): Add support for LTC2978A
  hwmon: (pmbus/ltc2978): Add support for LTC2977
  hwmon: (pmbus/lm25066) Add support for LM25063
  hwmon: Correct some typos
  hwmon: (gpio-fan) Include linux/of.h header
  hwmon: (lm70) Remove redundant spi_set_drvdata
  hwmon: (adcxx) Remove redundant spi_set_drvdata
  hwmon: (jc42) fix coccinelle warnings
  hwmon: (ltc4261) fix coccinelle warnings
  hwmon: (lm95234) fix coccinelle warnings
  hwmon: (max6697) fix coccinelle warnings
  hwmon: (max6642 fix coccinelle warnings
  hwmon: (ds1621) fix coccinelle warnings
  hwmon: (nct6775) fix coccinelle warnings
  hwmon: (jc42) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (ltc4261) Convert to use devm_hwmon_device_register_with_groups
  ...

Pull powerpc updates from Benjamin Herrenschmidt:
 "The bulk of this is LE updates.  One should now be able to build an LE
  kernel and even run some things in it.

  I'm still sitting on a handful of patches to enable the new ABI that I
  *might* still send this merge window around, but due to the
  incertainty (they are pretty fresh) I want to keep them separate.

  Other notable changes are some infrastructure bits to better handle
  PCI pass-through under KVM, some bits and pieces added to the new
  PowerNV platform support such as access to the CPU SCOM bus via sysfs,
  and support for EEH error handling on PHB3 (Power8 PCIe).

  We also grew arch_get_random_long() for both pseries and powernv when
  running on P7+ and P8, exploiting the HW rng.

  And finally various embedded updates from freescale"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (154 commits)
  powerpc: Fix fatal SLB miss when restoring PPR
  powerpc/powernv: Reserve the correct PE number
  powerpc/powernv: Add PE to its own PELTV
  powerpc/powernv: Add support for indirect XSCOM via debugfs
  powerpc/scom: Improve debugfs interface
  powerpc/scom: Enable 64-bit addresses
  powerpc/boot: Properly handle the base "of" boot wrapper
  powerpc/bpf: Support MOD operation
  powerpc/bpf: Fix DIVWU instruction opcode
  of: Move definition of of_find_next_cache_node into common code.
  powerpc: Remove big endianness assumption in of_find_next_cache_node
  powerpc/tm: Remove interrupt disable in __switch_to()
  powerpc: word-at-a-time optimization for 64-bit Little Endian
  powerpc/bpf: BPF JIT compiler for 64-bit Little Endian
  powerpc: Only save/restore SDR1 if in hypervisor mode
  powerpc/pmu: Fix ADB_PMU_LED_IDE dependencies
  powerpc/nvram: Fix endian issue when using the partition length
  powerpc/nvram: Fix endian issue when reading the NVRAM size
  powerpc/nvram: Scan partitions only once
  powerpc/mpc512x: remove unnecessary #if
  ...

Pull microblaze updates from Michal Simek:
 - Get rid of NO_MMU Kconfig
 - mmap2 fixups
 - Some minor cleanups

* tag 'microblaze-3.13-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove incorrect file path
  microblaze: Fix bug with mmap2 syscall MB implementation
  microblaze: Use predefined SYSCALL_DEFINE macro
  microblaze: Remove deprecated IRQF_DISABLED
  microblaze: Calculate kernel pad automatically
  microblaze: Remove unused NO_MMU Kconfig parameter

Pull metag architecture changes from James Hogan:
 - A change to remove the last dependence on bootloader exception
   handlers so that QEMU can more easily boot an SMP Linux/Meta kernel
   image directly.
 - A fix for a minor off by one error in a BUG_ON condition found by Dan
   Carpenter.

* tag 'metag-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: off by one in setup_bootmem_node()
  metag: handle low level kicks directly

Pull h8300 platform removal from Guenter Roeck:
 "The patch series has been in -next for more than one relase cycle.  I
  did get a number of Acks, and no objections.

  H8/300 has been dead for several years, the kernel for it has not
  compiled for ages, and recent versions of gcc for it are broken.
  Remove support for it"

* tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  CREDITS: Add Yoshinori Sato for h8300
  fs/minix: Drop dependency on H8300
  Drop remaining references to H8/300 architecture
  Drop MAINTAINERS entry for H8/300
  watchdog: Drop references to H8300 architecture
  net/ethernet: Drop H8/300 Ethernet driver
  net/ethernet: smsc9194: Drop conditional code for H8/300
  ide: Drop H8/300 driver
  Drop support for Renesas H8/300 (h8300) architecture

Pull x86 UV debug changes from Ingo Molnar:
 "Various SGI UV debuggability improvements, amongst them KDB support,
  with related core KDB enabling patches changing kernel/debug/kdb/"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "x86/UV: Add uvtrace support"
  x86/UV: Add call to KGDB/KDB from NMI handler
  kdb: Add support for external NMI handler to call KGDB/KDB
  x86/UV: Check for alloc_cpumask_var() failures properly in uv_nmi_setup()
  x86/UV: Add uvtrace support
  x86/UV: Add kdump to UV NMI handler
  x86/UV: Add summary of cpu activity to UV NMI handler
  x86/UV: Update UV support for external NMI signals
  x86/UV: Move NMI support

Pull x86 uaccess changes from Ingo Molnar:
 "A single change that micro-optimizes __copy_*_user_inatomic(), used by
  the futex code"

* 'x86-uaccess-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add 1/2/4/8 byte optimization to 64bit __copy_{from,to}_user_inatomic

Pull x86 reboot changes from Ingo Molnar:
 "Misc changes - the only one with functional impact should be commit
  16c21ae5 ("reboot: Allow specifying warm/cold reset for CF9 boot
  type") which extends cold/warm reboot handling to the 0xCF9 reboot
  method"

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/reboot: Correct pr_info() log message in the set_bios/pci/kbd_reboot()
  x86/reboot: Sort reboot DMI quirks by vendor
  x86/reboot: Remove the duplicate C6100 entry in the reboot quirks list
  reboot: Allow specifying warm/cold reset for CF9 boot type

Pull x86 platform fixlet from Ingo Molnar:
 "A single __initdata fix"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/geode: Fix incorrect placement of __initdata tag

Pull x86 mm fixlet from Ingo Molnar:
 "One cleanup that documents a particular detail in init_mem_mapping()"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Add 'step_size' comments to init_mem_mapping()

Pull x86 RAS changes from Ingo Molnar:
 "The biggest change adds support for Intel 'CPER' (UEFI Common Platform
  Error Record) error logging, which builds upon an enhanced error
  logging mechanism available on Xeon processors.

  Full description is here:

    http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html

  This change provides a module (and support code) to check for an
  extended error log and prints extra details about the error on the
  console"

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ACPI, x86: Fix extended error log driver to depend on CONFIG_X86_LOCAL_APIC
  dmi: Avoid unaligned memory access in save_mem_devices()
  Move cper.c from drivers/acpi/apei to drivers/firmware/efi
  EDAC, GHES: Update ghes error record info
  ACPI, APEI, CPER: Cleanup CPER memory error output format
  ACPI, APEI, CPER: Enhance memory reporting capability
  ACPI, APEI, CPER: Add UEFI 2.4 support for memory error
  DMI: Parse memory device (type 17) in SMBIOS
  ACPI, x86: Extended error log driver for x86 platform
  bitops: Introduce a more generic BITMASK macro
  ACPI, CPER: Update cper info
  ACPI, APEI, CPER: Fix status check during error printing

Pull x86 iommu changes from Ingo Molnar:
 "Make it easier to turn off the old AMD GART code"

* 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/iommu: Clean up the CONFIG_GART_IOMMU config option a bit
  x86/iommu: Don't make AMD_GART depend on EXPERT and default y

Pull x86/intel-mid changes from Ingo Molnar:
 "Update the 'intel mid' (mobile internet device) platform code as Intel
  is rolling out more SoC designs.

  This gets rid of most of the 'MRST' platform code in the process,
  mostly by renaming and shuffling code around into their respective
  'intel-mid' platform drivers"

* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, intel-mid: Do not re-introduce usage of obsolete __cpuinit
  intel_mid: Move platform device setups to their own platform_<device>.* files
  x86: intel-mid: Add section for sfi device table
  intel-mid: sfi: Allow struct devs_id.get_platform_data to be NULL
  intel_mid: Moved SFI related code to sfi.c
  intel_mid: Added custom handler for ipc devices
  intel_mid: Added custom device_handler support
  intel_mid: Refactored sfi_parse_devs() function
  intel_mid: Renamed *mrst* to *intel_mid*
  pci: intel_mid: Return true/false in function returning bool
  intel_mid: Renamed *mrst* to *intel_mid*
  mrst: Fixed indentation issues
  mrst: Fixed printk/pr_* related issues

Pull x86/hyperv changes from Ingo Molnar:
 "These changes enable Linux guests to boot as 'Modern VM' guest kernels
  on MS-Hyperv hosts"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hyperv: Move a variable to avoid an unused variable warning
  x86, hyperv: Fix build error due to missing <asm/apic.h> include
  x86, hyperv: Correctly guard the local APIC calibration code
  x86, hyperv: Get the local APIC timer frequency from the hypervisor

Pull x86 EFI changes from Ingo Molnar:
 "Main changes:

   - Add support for earlyprintk=efi which uses the EFI framebuffer.
     Very useful for debugging boot problems.

   - EFI stub support for large memory maps (more than 128 entries)

   - EFI ARM support - this was mostly done by generalizing x86 <-> ARM
     platform differences, such as by moving x86 EFI code into
     drivers/firmware/efi/ and sharing it with ARM.

   - Documentation updates

   - misc fixes"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  x86/efi: Add EFI framebuffer earlyprintk support
  boot, efi: Remove redundant memset()
  x86/efi: Fix config_table_type array termination
  x86 efi: bugfix interrupt disabling sequence
  x86: EFI stub support for large memory maps
  efi: resolve warnings found on ARM compile
  efi: Fix types in EFI calls to match EFI function definitions.
  efi: Renames in handle_cmdline_files() to complete generalization.
  efi: Generalize handle_ramdisks() and rename to handle_cmdline_files().
  efi: Allow efi_free() to be called with size of 0
  efi: use efi_get_memory_map() to get final map for x86
  efi: generalize efi_get_memory_map()
  efi: Rename __get_map() to efi_get_memory_map()
  efi: Move unicode to ASCII conversion to shared function.
  efi: Generalize relocate_kernel() for use by other architectures.
  efi: Move relocate_kernel() to shared file.
  efi: Enforce minimum alignment of 1 page on allocations.
  efi: Rename memory allocation/free functions
  efi: Add system table pointer argument to shared functions.
  efi: Move common EFI stub code from x86 arch code to common location
  ...

Pull x86 cpu changes from Ingo Molnar:
 "The biggest change that stands out is the increase of the
  CONFIG_NR_CPUS range from 4096 to 8192 - as real hardware out there
  already went beyond 4k CPUs ...

  We only allow more than 512 CPUs if offstack cpumasks are enabled.

  CONFIG_MAXSMP=y remains to be the 'you are nuts!' extreme testcase,
  which now means a max of 8192 CPUs"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Increase max CPU count to 8192
  x86/cpu: Allow higher NR_CPUS values
  x86/cpu: Always print SMP information in /proc/cpuinfo
  x86/cpu: Track legacy CPU model data only on 32-bit kernels

Pull x86 cleanups from Ingo Molnar:
 "Two small cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, msr: Use file_inode(), not f_mapping->host
  x86: mkpiggy.c: Explicitly close the output file

Pull x86 build changes from Ingo Molnar:
 "Two small changes"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, defconfig: Add DEVTMPFS and DEVTMPFS_MOUNT to *86*_defconfig
  x86, build: move build output statistics away from stderr

Pull x86 boot changes from Ingo Molnar:
 "Two changes that prettify and compactify the SMP bootup output from:

     smpboot: Booting Node   0, Processors  #1 #2 #3 OK
     smpboot: Booting Node   1, Processors  #4 #5 #6 #7 OK
     smpboot: Booting Node   2, Processors  #8 #9 #10 #11 OK
     smpboot: Booting Node   3, Processors  #12 #13 #14 #15 OK
     Brought up 16 CPUs

  to something like:

     x86: Booting SMP configuration:
     .... node  #0, CPUs:        #1  #2  #3
     .... node  #1, CPUs:    #4  #5  #6  #7
     .... node  #2, CPUs:    #8  #9 #10 #11
     .... node  #3, CPUs:   #12 #13 #14 #15
     x86: Booted up 4 nodes, 16 CPUs"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Further compress CPUs bootup message
  x86: Improve the printout of the SMP bootup CPU table

Pull x86 user access changes from Ingo Molnar:
 "This tree contains two copy_[from/to]_user() build time checking
  changes/enhancements from Jan Beulich.

  The desired outcome is to get better compiler warnings with
  CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y, to keep people from
  introducing bugs such as overflows and information leaks"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Unify copy_to_user() and add size checking to it
  x86: Unify copy_from_user() size checking

Pull x86/apic fix from Ingo Molnar:
 "A single fix to the IO-APIC / local-APIC shutdown sequence"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Disable I/O APIC before shutdown of the local APIC

Pull timer changes from Ingo Molnar:
 "Main changes in this cycle were:

   - Updated full dynticks support.

   - Event stream support for architected (ARM) timers.

   - ARM clocksource driver updates.

   - Move arm64 to using the generic sched_clock framework & resulting
     cleanup in the generic sched_clock code.

   - Misc fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  x86/time: Honor ACPI FADT flag indicating absence of a CMOS RTC
  clocksource: sun4i: remove IRQF_DISABLED
  clocksource: sun4i: Report the minimum tick that we can program
  clocksource: sun4i: Select CLKSRC_MMIO
  clocksource: Provide timekeeping for efm32 SoCs
  clocksource: em_sti: convert to clk_prepare/unprepare
  time: Fix signedness bug in sysfs_get_uname() and its callers
  timekeeping: Fix some trivial typos in comments
  alarmtimer: return EINVAL instead of ENOTSUPP if rtcdev doesn't exist
  clocksource: arch_timer: Do not register arch_sys_counter twice
  timer stats: Add a 'Collection: active/inactive' line to timer usage statistics
  sched_clock: Remove sched_clock_func() hook
  arch_timer: Move to generic sched_clock framework
  clocksource: tcb_clksrc: Remove IRQF_DISABLED
  clocksource: tcb_clksrc: Improve driver robustness
  clocksource: tcb_clksrc: Replace clk_enable/disable with clk_prepare_enable/disable_unprepare
  clocksource: arm_arch_timer: Use clocksource for suspend timekeeping
  clocksource: dw_apb_timer_of: Mark a few more functions as __init
  clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally
  arm: zynq: Enable arm_global_timer
  ...

Pull scheduler changes from Ingo Molnar:
 "The main changes in this cycle are:

   - (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
     van Riel, Peter Zijlstra et al.  Yay!

   - optimize preemption counter handling: merge the NEED_RESCHED flag
     into the preempt_count variable, by Peter Zijlstra.

   - wait.h fixes and code reorganization from Peter Zijlstra

   - cfs_bandwidth fixes from Ben Segall

   - SMP load-balancer cleanups from Peter Zijstra

   - idle balancer improvements from Jason Low

   - other fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
  ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
  stop_machine: Fix race between stop_two_cpus() and stop_cpus()
  sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
  sched: Fix asymmetric scheduling for POWER7
  sched: Move completion code from core.c to completion.c
  sched: Move wait code from core.c to wait.c
  sched: Move wait.c into kernel/sched/
  sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
  sched: Avoid throttle_cfs_rq() racing with period_timer stopping
  sched: Guarantee new group-entities always have weight
  sched: Fix hrtimer_cancel()/rq->lock deadlock
  sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
  sched: Fix race on toggling cfs_bandwidth_used
  sched: Remove extra put_online_cpus() inside sched_setaffinity()
  sched/rt: Fix task_tick_rt() comment
  sched/wait: Fix build breakage
  sched/wait: Introduce prepare_to_wait_event()
  sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
  sched: Remove get_online_cpus() usage
  sched: Fix race in migrate_swap_stop()
  ...

Pull perf updates from Ingo Molnar:
 "As a first remark I'd like to note that the way to build perf tooling
  has been simplified and sped up, in the future it should be enough for
  you to build perf via:

        cd tools/perf/
        make install

  (ie without the -j option.) The build system will figure out the
  number of CPUs and will do a parallel build+install.

  The various build system inefficiencies and breakages Linus reported
  against the v3.12 pull request should now be resolved - please
  (re-)report any remaining annoyances or bugs.

  Main changes on the perf kernel side:

   * Performance optimizations:
      . perf ring-buffer code optimizations,          by Peter Zijlstra
      . perf ring-buffer code optimizations,          by Oleg Nesterov
      . x86 NMI call-stack processing optimizations,  by Peter Zijlstra
      . perf context-switch optimizations,            by Peter Zijlstra
      . perf sampling speedups,                       by Peter Zijlstra
      . x86 Intel PEBS processing speedups,           by Peter Zijlstra

   * Enhanced hardware support:
      . for Intel Ivy Bridge-EP uncore PMUs,          by Zheng Yan
      . for Haswell transactions,                     by Andi Kleen, Peter Zijlstra

   * Core perf events code enhancements and fixes by Oleg Nesterov:
      . for uprobes, if fork() is called with pending ret-probes
      . for uprobes platform support code

   * New ABI details by Andi Kleen:
      . Report x86 Haswell TSX transaction abort cost as weight

  Main changes on the perf tooling side (some of these tooling changes
  utilize the above kernel side changes):

   * 'perf report/top' enhancements:

      . Convert callchain children list to rbtree, greatly reducing the
        time taken for callchain processing, from Namhyung Kim.

      . Add new COMM infrastructure, further improving histogram
        processing, from Frédéric Weisbecker, one fix from Namhyung Kim.

      . Add /proc/kcore based live-annotation improvements, including
        build-id cache support, multi map 'call' instruction navigation
        fixes, kcore address validation, objdump workarounds.  From
        Adrian Hunter.

      . Show progress on histogram collapsing, that can take a long
        time, from Namhyung Kim.

      . Add --max-stack option to limit callchain stack scan in 'top'
        and 'report', improving callchain processing when reducing the
        stack depth is an option, from Waiman Long.

      . Add new option --ignore-vmlinux for perf top, from Willy
        Tarreau.

   * 'perf trace' enhancements:

      . 'perf trace' now can can use a 'perf probe' dynamic tracepoints
        to hook into the userspace -> kernel pathname copy so that it
        can map fds to pathnames without reading /proc/pid/fd/ symlinks.
        From Arnaldo Carvalho de Melo.

      . Show VFS path associated with fd in live sessions, using a
        'vfs_getname' 'perf probe' created dynamic tracepoint or by
        looking at /proc/pid/fd, from Arnaldo Carvalho de Melo.

      . Add 'trace' beautifiers for lots of syscall arguments, from
        Arnaldo Carvalho de Melo.

      . Implement more compact 'trace' output by suppressing zeroed
        args, from Arnaldo Carvalho de Melo.

      . Show thread COMM by default in 'trace', from Arnaldo Carvalho de
        Melo.

      . Add option to show full timestamp in 'trace', from David Ahern.

      . Add 'record' command in 'trace', to record raw_syscalls:*, from
        David Ahern.

      . Add summary option to dump syscall statistics in 'trace', from
        David Ahern.

      . Improve error messages in 'trace', providing hints about system
        configuration steps needed for using it, from Ramkumar
        Ramachandra.

      . 'perf trace' now emits hints as to why tracing is not possible,
        helping the user to setup the system to allow tracing in the
        desired permission granularity, telling if the problem is due to
        debugfs not being mounted or with not enough permission for
        !root, /proc/sys/kernel/perf_event_paranoit value, etc.  From
        Arnaldo Carvalho de Melo.

   * 'perf record' enhancements:

      . Check maximum frequency rate for record/top, emitting better
        error messages, from Jiri Olsa.

      . 'perf record' code cleanups, from David Ahern.

      . Improve write_output error message in 'perf record', from Adrian
        Hunter.

      . Allow specifying B/K/M/G unit to the --mmap-pages arguments,
        from Jiri Olsa.

      . Fix command line callchain attribute tests to handle the new
        -g/--call-chain semantics, from Arnaldo Carvalho de Melo.

   * 'perf kvm' enhancements:

      . Disable live kvm command if timerfd is not supported, from David
        Ahern.

      . Fix detection of non-core features, from David Ahern.

   * 'perf list' enhancements:

      . Add usage to 'perf list', from David Ahern.

      . Show error in 'perf list' if tracepoints not available, from
        Pekka Enberg.

   * 'perf probe' enhancements:

      . Support "$vars" meta argument syntax for local variables,
        allowing asking for all possible variables at a given probe
        point to be collected when it hits, from Masami Hiramatsu.

   * 'perf sched' enhancements:

      . Address the root cause of that 'perf sched' stack initialization
        build slowdown, by programmatically setting a big array after
        moving the global variable back to the stack.  Fix from Adrian
        Hunter.

   * 'perf script' enhancements:

      . Set up output options for in-stream attributes, from Adrian
        Hunter.

      . Print addr by default for BTS in 'perf script', from Adrian
        Juntmer

   * 'perf stat' enhancements:

      . Improved messages when doing profiling in all or a subset of
        CPUs using a workload as the session delimitator, as in:

         'perf stat --cpu 0,2 sleep 10s'

        from Arnaldo Carvalho de Melo.

      . Add units to nanosec-based counters in 'perf stat', from David
        Ahern.

      . Remove bogus info when using 'perf stat' -e cycles/instructions,
        from Ramkumar Ramachandra.

   * 'perf lock' enhancements:

      . 'perf lock' fixes and cleanups, from Davidlohr Bueso.

   * 'perf test' enhancements:

      . Fixup PERF_SAMPLE_TRANSACTION handling in sample synthesizing
        and 'perf test', from Adrian Hunter.

      . Clarify the "sample parsing" test entry, from Arnaldo Carvalho
        de Melo.

      . Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
        from Arnaldo Carvalho de Melo.

      . Memory leak fixes in 'perf test', from Felipe Pena.

   * 'perf bench' enhancements:

      . Change the procps visible command-name of invididual benchmark
        tests plus cleanups, from Ingo Molnar.

   * Generic perf tooling infrastructure/plumbing changes:

      . Separating data file properties from session, code
        reorganization from Jiri Olsa.

      . Fix version when building out of tree, as when using one of
        these:

        $ make help | grep perf
          perf-tar-src-pkg    - Build perf-3.12.0.tar source tarball
          perf-targz-src-pkg  - Build perf-3.12.0.tar.gz source tarball
          perf-tarbz2-src-pkg - Build perf-3.12.0.tar.bz2 source tarball
          perf-tarxz-src-pkg  - Build perf-3.12.0.tar.xz source tarball
        $

        from David Ahern.

      . Enhance option parse error message, showing just the help lines
        of the options affected, from Namhyung Kim.

      . libtraceevent updates from upstream trace-cmd repo, from Steven
        Rostedt.

      . Always use perf_evsel__set_sample_bit to set sample_type, from
        Adrian Hunter.

      . Memory and mmap leak fixes from Chenggang Qin.

      . Assorted build fixes for from David Ahern and Jiri Olsa.

      . Speed up and prettify the build system, from Ingo Molnar.

      . Implement addr2line directly using libbfd, from Roberto Vitillo.

      . Separate the GTK support in a separate libperf-gtk.so DSO, that
        is only loaded when --gtk is specified, from Namhyung Kim.

      . perf bash completion fixes and improvements from Ramkumar
        Ramachandra.

      . Support for Openembedded/Yocto -dbg packages, from Ricardo
        Ribalda Delgado.

  And lots and lots of other fixes and code reorganizations that did not
  make it into the list, see the shortlog, diffstat and the Git log for
  details!"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (300 commits)
  uprobes: Fix the memory out of bound overwrite in copy_insn()
  uprobes: Fix the wrong usage of current->utask in uprobe_copy_process()
  perf tools: Remove unneeded include
  perf record: Remove post_processing_offset variable
  perf record: Remove advance_output function
  perf record: Refactor feature handling into a separate function
  perf trace: Don't relookup fields by name in each sample
  perf tools: Fix version when building out of tree
  perf evsel: Ditch evsel->handler.data field
  uprobes: Export write_opcode() as uprobe_write_opcode()
  uprobes: Introduce arch_uprobe->ixol
  uprobes: Kill module_init() and module_exit()
  uprobes: Move function declarations out of arch
  perf/x86/intel: Add Ivy Bridge-EP uncore IRP box support
  perf/x86/intel/uncore: Add filter support for IvyBridge-EP QPI boxes
  perf: Factor out strncpy() in perf_event_mmap_event()
  tools/perf: Add required memory barriers
  perf: Fix arch_perf_out_copy_user default
  perf: Update a stale comment
  perf: Optimize perf_output_begin() -- address calculation
  ...

Pull leftover IRQ fixes from Ingo Molnar:
 "Two (minor) fixlets that missed v3.12"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Set the irq thread policy without checking CAP_SYS_NICE
  irq: DocBook/genericirq.tmpl: Correct various typos

Pull IRQ changes from Ingo Molnar:
 "The biggest change this cycle are the softirq/hardirq stack
  interaction and nesting fixes, cleanups and reorganizations from
  Frederic.  This is the longer followup story to the softirq nesting
  fix that is already upstream (commit ded79754: "irq: Force hardirq
  exit's softirq processing on its own stack")"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro
  powerpc: Tell about irq stack coverage
  x86: Tell about irq stack coverage
  irq: Optimize softirq stack selection in irq exit
  irq: Justify the various softirq stack choices
  irq: Improve a bit softirq debugging
  irq: Optimize call to softirq on hardirq exit
  irq: Consolidate do_softirq() arch overriden implementations
  x86/irq: Correct comment about i8259 initialization

Pull RCU updates from Ingo Molnar:
 "The main RCU changes in this cycle are:

   - Idle entry/exit changes, to throttle callback execution and other
     refinements to speed up kbuild, primarily to address performance
     issues located by Tibor Billes.

   - Grace-period related changes, primarily to aid in debugging,
     inspired by an -rt debugging session.

   - Code reorganization moving RCU's source files into its own
     kernel/rcu/ directory.

   - RCU documentation updates

   - Miscellaneous fixes.

  Note, the following commit:

    5c889690 mm: Place preemption point in do_mlockall() loop

  is identical to the commit already in your tree via email:

    22356f44 mm: Place preemption point in do_mlockall() loop

  [ Your version of the changelog nicely demonstrates it how kernel oops
    messages should be trimmed properly :-/ ]"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  rcu: Move RCU-related source code to kernel/rcu directory
  rcu: Fix occurrence of "the the" in checklist.txt
  kthread: Add pointer to vmstat-avoidance patch
  rcu: Update stall-warning documentation
  rcu: Consistent rcu_is_watching() naming
  rcu: Change EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL()
  rcu: Is it safe to enter an RCU read-side critical section?
  rcu: Throttle invoke_rcu_core() invocations due to non-lazy callbacks
  rcu: Throttle rcu_try_advance_all_cbs() execution
  rcu: Remove redundant code from rcu_cleanup_after_idle()
  rcu: Fix CONFIG_RCU_NOCB_CPU_ALL panic on machines with sparse CPU mask
  rcu: Avoid sparse warnings in rcu_nocb_wake trace event
  rcu: Track rcu_nocb_kthread()'s sleeping and awakening
  rcu: Distinguish between NOCB and non-NOCB rcu_callback trace events
  rcu: Add tracing for rcuo no-CBs CPU wakeup handshake
  rcu: Add tracing of normal (non-NOCB) grace-period requests
  rcu: Add tracing to rcu_gp_kthread()
  rcu: Flag lockless access to ->gp_flags with ACCESS_ONCE()
  rcu: Prevent spurious-wakeup DoS attack on rcu_gp_kthread()
  rcu: Improve grace-period start logic
  ...

This reverts commit 8eba1842.

uv_trace() is not used by anything, nor is uv_trace_nmi_func, nor
uv_trace_func.

That's not how we do instrumentation code in the kernel: we add
tracepoints, printk()s, etc. so that everyone not just those with
magic kernel modules can debug a system.

So remove this unused (and misguied) piece of code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/n/tip-tumfBffmr4jmnt8Gyxanoblg@git.kernel.org

Since the introduction of PREEMPT_NEED_RESCHED in:

  f27dde8d ("sched: Add NEED_RESCHED to the preempt_count")

we need to be able to look at both TIF_NEED_RESCHED and
PREEMPT_NEED_RESCHED to understand the full preemption behaviour.

Add it to the trace output.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/20131004152826.GP3081@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

There is a race between stop_two_cpus, and the global stop_cpus.

It is possible for two CPUs to get their stopper functions queued
"backwards" from one another, resulting in the stopper threads
getting stuck, and the system hanging. This can happen because
queuing up stoppers is not synchronized.

This patch adds synchronization between stop_cpus (a rare operation),
and stop_two_cpus.
Reported-and-Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20131101104146.03d1e043@annuminas.surriel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Randconfig build by Fengguang's robot army reported:

   drivers/built-in.o: In function `extlog_print':
   >> acpi_extlog.c:(.text+0xcc719): undefined reference to `boot_cpu_physical_apicid'

The config had CONFIG_SMP=n so we picked up this definition from:

  <asm/cpu.h>: #define cpu_physical_id(cpu) boot_cpu_physical_apicid

But boot_cpu_physical_apicid is defined in arch/x86/kernel/apic/apic.c
which is only built if CONFIG_X86_LOCAL_APIC=y.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/6be3afdcad7968f7fb7c0b681e547b3e872e44dd.1383947368.git.tony.luck@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARC changes from Vineet Gupta:
 - Towards a working SMP setup (ASID allocation, TLB Flush,...)
 - Support for TRACE_IRQFLAGS, LOCKDEP
 - cacheflush backend consolidation for I/D
 - Lots of allmodconfig fixlets from Chen
 - Other improvements/fixes

* tag 'arc-v3.13-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (25 commits)
  ARC: [plat-arcfpga] defconfig update
  smp, ARC: kill SMP single function call interrupt
  ARC: [SMP] Disallow RTSC
  ARC: [SMP] Fix build failures for large NR_CPUS
  ARC: [SMP] enlarge possible NR_CPUS
  ARC: [SMP] TLB flush
  ARC: [SMP] ASID allocation
  arc: export symbol for pm_power_off in reset.c
  arc: export symbol for save_stack_trace() in stacktrace.c
  arc: remove '__init' for get_hw_config_num_irq()
  arc: remove '__init' for first_lines_of_secondary()
  arc: remove '__init' for setup_processor() and arc_init_IRQ()
  arc: kgdb: add default implementation for kgdb_roundup_cpus()
  ARC: Fix bogus gcc warning and micro-optimise TLB iteration loop
  ARC: Add support for irqflags tracing and lockdep
  ARC: Reset the value of Interrupt Priority Register
  ARC: Reduce #ifdef'ery for unaligned access emulation
  ARC: Change calling convention of do_page_fault()
  ARC: cacheflush optim - PTAG can be loop invariant if V-P is const
  ARC: cacheflush refactor #3: Unify the {d,i}cache flush leaf helpers
  ...

Pull m68k updates from Geert Uytterhoeven:
 "Summary:
   - __put_user_unaligned may/will be used by btrfs
   - m68k part of a global cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove deprecated IRQF_DISABLED
  m68k/m68knommu: Implement __get_user_unaligned/__put_user_unaligned()

Pull parisc update from Helge Deller:
 - a bugfix for sticon (parisc text console driver) to not crash the
   64bit kernel on machines with more than 4GB RAM
 - added kernel audit support
 - made udelay() implementation SMP-safe
 - "make install" now does not depend on vmlinux
 - added defconfigs for 32- and 64-kernels

* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: add generic 32- and 64-bit defconfigs
  parisc: sticon - unbreak on 64bit kernel
  parisc: signal fixup - SIGBUS vs. SIGSEGV
  parisc: implement full version of access_ok()
  parisc: correctly display number of active CPUs
  parisc: do not count IPI calls twice
  parisc: make udelay() SMP-safe
  parisc: remove duplicate define
  parisc: make "make install" not depend on vmlinux
  parisc: add kernel audit feature
  parisc: provide macro to create exception table entries

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core

Pull uprobes fixes from Oleg Nesterov.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARM SoC DT updates from Olof Johansson:
 "Most of this branch consists of updates, additions and general churn
  of the device tree source files in the kernel (arch/arm/boot/dts).
  Besides that, there are a few things to point out:

   - Lots of platform conversion on OMAP2+, with removal of old board
     files for various platforms.
   - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as
     well
   - Some updates to pinctrl and other subsystems.  Most of these are
     for DT-enablement of the various platforms and acks have been
     collected"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits)
  ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts
  ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx)
  ARM: dts: bcm281xx: Add card detect GPIO
  ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt)
  ARM: bcm281xx: Add device node for the GPIO controller
  ARM: mvebu: Add Netgear ReadyNAS 104 board
  ARM: tegra: fix Tegra114 IOMMU register address
  ARM: kirkwood: add support for OpenBlocks A7 platform
  ARM: dts: omap4-panda: add DPI pinmuxing
  ARM: dts: AM33xx: Add RNG node
  ARM: dts: AM33XX: Add hwspinlock node
  ARM: dts: OMAP5: Add hwspinlock node
  ARM: dts: OMAP4: Add hwspinlock node
  ARM: dts: use 'status' property for PCIe nodes
  ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C
  ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes
  ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts
  ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts
  ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts
  ARM: mvebu: Add the core-divider clock to Armada 370/XP
  ...

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.  In this case it's involved:

   - Some Davinci driver updates that has required corresponding
     platform code changes (gpio mostly)
   - CCI bindings and a few driver updates
   - Marvell mvebu patches for PCI MSI support (could have gone through
     the PCI tree for this release, but they were acked by Bjorn for
     3.12 so we kept them through arm-soc).
   - Marvell dove switch-over to DT-based PCIe configuration
   - Misc updates for Samsung platform dmaengine drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
  dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller
  ARM: S3C24XX: Fix possible dma selection warning
  PCI: mvebu: make local functions static
  PCI: mvebu: add I/O access wrappers
  PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug
  ARM: mvebu: fix gated clock documentation
  ARM: dove: remove legacy pcie and clock init
  ARM: dove: switch to DT probed mbus address windows
  ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
  ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443
  dmaengine: add driver for Samsung s3c24xx SoCs
  ARM: S3C24XX: number the dma clocks
  PCI: mvebu: add support for Marvell Dove SoCs
  PCI: mvebu: add support for reset on GPIO
  PCI: mvebu: remove subsys_initcall
  PCI: mvebu: increment nports only for registered ports
  PCI: mvebu: move clock enable before register access
  PCI: mvebu: add support for MSI
  irqchip: armada-370-xp: implement MSI support
  ...