- 11 Jul, 2007 40 commits
-
-
Tejun Heo authored
Implement sysfs_find_dirent() and sysfs_get_dirent(). sysfs_dirent_exist() is replaced by sysfs_find_dirent(). These will be used to make directory entries reclamiable. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Tejun Heo authored
Implement SYSFS_FLAG_REMOVED flag which currently is used only to improve sanity check in sysfs_deactivate(). The flag will be used to make directory entries reclamiable. Signed-off-by:
-
Tejun Heo authored
Rename sysfs_dirent->s_type to s_flags, pack type into lower eight bits and reserve the rest for flags. sysfs_type() can used to access the type. All existing sd->s_type accesses are converted to use sysfs_type(). While at it, type test is changed to equality test instead of bit-and test where appropriate. Signed-off-by:
-
Tejun Heo authored
sysfs_drop_dentry() used to go through sd->s_dentry and sd->s_parent->s_dentry to access the inodes. This is incorrect because inode can be cached without dentry. This patch makes sysfs_drop_dentry() access inodes using ilookup() on sd->s_ino. This is both correct and simpler. Signed-off-by:
-
Rafael J. Wysocki authored
Fix oops on x86_64 caused by the dereference of dir in sysfs_drop_dentry() made before checking if dir is not NULL (cf. http://marc.info/?l=linux-kernel&m=118151626704924&w=2). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Tejun Heo authored
Make sysfs_dirent use singly linked list for its tree structure. sysfs_link_sibling() and sysfs_unlink_sibling() functions are added to handle simpler cases. It adds some complexity and cpu cycle overhead but reduced memory footprint is worthwhile on big machines. This change reduces the sizeof sysfs_dirent from 104 to 88 on 64bit and from 60 to 52 on 32bit. Signed-off-by:
-
Tejun Heo authored
Make sysfs_dirent->s_active an atomic_t instead of rwsem. This reduces the size of sysfs_dirent from 136 to 104 on 64bit and from 76 to 60 on 32bit with lock debugging turned off. With lock debugging turned on the reduction is much larger. s_active starts at zero and each active reference increments s_active. Putting a reference decrements s_active. Deactivation subtracts SD_DEACTIVATED_BIAS which is currently INT_MIN and assumed to be small enough to make s_active negative. If s_active is negative, sysfs_get() no longer grants new references. Deactivation succeeds immediately if there is no active user; otherwise, it waits using a completion for the last put. Due to the removal of lockdep tricks, this change makes things less trickier in release_sysfs_dirent(). As all the complexity is contained in three s_active functions, I think it's more readable this way. Signed-off-by:
-
Tejun Heo authored
These functions are about to receive more complexity and doesn't really need to be inlined in the first place. Move them from fs/sysfs/sysfs.h to fs/sysfs/dir.c. Signed-off-by:
-
Tejun Heo authored
The root sysfs_dirent didn't point to the root dentry fix it. Signed-off-by:
-
Tejun Heo authored
After dentry is reclaimed, sysfs always used to allocate new dentry and inode if the file is accessed again. This causes problem with operations which only pin the inode. For example, if inotify watch is added to a sysfs file and the dentry for the file is reclaimed, the next update event creates new dentry and new inode making the inotify watch miss all the events from there on. This patch fixes it by using iget_locked() instead of new_inode(). sysfs_new_inode() is renamed to sysfs_get_inode() and inode is initialized iff the inode is newly allocated. sysfs_instantiate() is responsible for unlocking new inodes. Signed-off-by:
-
Tejun Heo authored
Reorganize/clean up sysfs_new_inode() and sysfs_create(). * sysfs_init_inode() is separated out from sysfs_new_inode() and is responsible for basic initialization. * sysfs_instantiate() replaces the last step of sysfs_create() and is responsible for dentry instantitaion. * type-specific initialization is moved out to the callers. * mode is specified only once when creating a sysfs_dirent. * spurious list_del_init(&sd->s_sibling) dropped from create_dir() This change is to * prepare for inode allocation fix. * separate alloc and init code for synchronization update. * make dentry/inode initialization more flexible for later changes. This patch doesn't introduce visible behavior change. Signed-off-by:
-
Tejun Heo authored
Parent reference wasn't properly transferred during rename and move. Fix it. Signed-off-by:
-
Tejun Heo authored
sysfs_alloc_ino() isn't used out side of fs/sysfs/dir.c. Make it static. Signed-off-by:
-
Tejun Heo authored
devt_attr and uevent_attr are either allocated dynamically with or embedded in device and class_device as they needed their owner field set to the module implementing the driver. Now that sysfs implements immediate disconnect and owner field removed from struct attribute, there is no reason to do this. Remove these attributes from [class_]device and use static attribute structures instead. Signed-off-by:
-
Tejun Heo authored
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by:
-
Tejun Heo authored
This patch reimplements sysfs_drop_dentry() such that remove_dir() can use it to drop dentry instead of using a separate mechanism. With this change, making directories reclaimable is much easier. This patch used to contain fixes for two race conditions around sd->s_dentry but that part has been separated out and included into mainline early as commit 6aa054aa and dd14cbc9. Signed-off-by:
-
Tejun Heo authored
Consolidate sd <-> dentry association into sysfs_attach_dentry() and call it after dentry and inode are properly set up. This is in preparation of sysfs_drop_dentry() updates. Signed-off-by:
-
Tejun Heo authored
Now that sysfs_dirent can be disconnected from kobject on deletion, there is no need to orphan each attribute files. All [bin_]attribute nodes are automatically orphaned when the parent node is deleted. Kill attribute file orphaning. Signed-off-by:
-
Tejun Heo authored
sysfs: implement sysfs_dirent active reference and immediate disconnect Opening a sysfs node references its associated kobject, so userland can arbitrarily prolong lifetime of a kobject which complicates lifetime rules in drivers. This patch implements active reference and makes the association between kobject and sysfs immediately breakable. Now each sysfs_dirent has two reference counts - s_count and s_active. s_count is a regular reference count which guarantees that the containing sysfs_dirent is accessible. As long as s_count reference is held, all sysfs internal fields in sysfs_dirent are accessible including s_parent and s_name. The newly added s_active is active reference count. This is acquired by invoking sysfs_get_active() and it's the caller's responsibility to ensure sysfs_dirent itself is accessible (should be holding s_count one way or the other). Dereferencing sysfs_dirent to access objects out of sysfs proper requires active reference. This includes access to the associated kobjects, attributes and ops. The active references can be drained and denied by calling sysfs_deactivate(). All active sysfs_dirents must be deactivated after deletion but before the default reference is dropped. This enables immediate disconnect of sysfs nodes. Once a sysfs_dirent is deleted, it won't access any entity external to sysfs proper. Because attr/bin_attr ops access both the node itself and its parent for kobject, they need to hold active references to both. sysfs_get/put_active_two() helpers are provided to help grabbing both references. Parent's is acquired first and released last. Unlike other operations, mmapped area lingers on after mmap() is finished and the module implement implementing it and kobj need to stay referenced till all the mapped pages are gone. This is accomplished by holding one set of active references to the bin_attr and its parent if there have been any mmap during lifetime of an openfile. The references are dropped when the openfile is released. This change makes sysfs lifetime rules independent from both kobject's and module's. It not only fixes several race conditions caused by sysfs not holding onto the proper module when referencing kobject, but also helps fixing and simplifying lifetime management in driver model and drivers by taking sysfs out of the equation. Please read the following message for more info. http://article.gmane.org/gmane.linux.kernel/510293Signed-off-by:
-
Tejun Heo authored
Implement bin_buffer which contains a mutex and pointer to PAGE_SIZE buffer to properly synchronize accesses to per-openfile buffer and prepare for immediate-kobj-disconnect. Signed-off-by:
-
Tejun Heo authored
sysfs symlink is implemented by referencing dentry and kobject from sysfs_dirent - symlink entry references kobject, dentry is used to walk the tree. This complicates object lifetimes rules and is dangerous - for example, there is no way to tell to which module the target of a symlink belongs and referencing that kobject can make it linger after the module is gone. This patch reimplements symlink using only sysfs_dirent tree. sd for a symlink points and holds reference to the target sysfs_dirent and all walking is done using sysfs_dirent tree. Simpler and safer. Please read the following message for more info. http://article.gmane.org/gmane.linux.kernel/510293Signed-off-by:
-
Tejun Heo authored
kobj->dentry can go away anytime unless the user controls when the associated sysfs node is deleted. This patch implements kobj_sysfs_assoc_lock which protects kobj->dentry. This will be used to maintain kobj based API when converting sysfs to use sysfs_dirent tree instead of dentry/kobject. Note that this lock belongs to kobject/driver-model not sysfs. Once sysfs is converted to not use kobject in its interface, this can be removed from sysfs. This is in preparation of object reference simplification. Signed-off-by:
-
Tejun Heo authored
Make sd->s_element a union of sysfs_elem_{dir|symlink|attr|bin_attr} and rename it to s_elem. This is to achieve... * some level of type checking : changing symlink to point to sysfs_dirent instead of kobject is much safer and less painful now. * easier / standardized dereferencing * allow sysfs_elem_* to contain more than one entry Where possible, pointer is obtained by directly deferencing from sd instead of going through other entities. This reduces dependencies to dentry, inode and kobject. to_attr() and to_bin_attr() are unused now and removed. This is in preparation of object reference simplification. Signed-off-by: -
Tejun Heo authored
Add s_name to sysfs_dirent. This is to further reduce dependency to the associated dentry. Name is copied for directories and symlinks but not for attributes. Where possible, name dereferences are converted to use sd->s_name. sysfs_symlink->link_name and sysfs_get_name() are unused now and removed. This change allows symlink to be implemented using sysfs_dirent tree proper, which is the last remaining dentry-dependent sysfs walk. Signed-off-by:
-
Tejun Heo authored
Add sysfs_dirent->s_parent. With this patch, each sd points to and holds a reference to its parent. This allows walking sysfs tree without referencing sd->s_dentry which can go away anytime if the user doesn't control when it's deleted. sd->s_parent is initialized and parent is referenced in sysfs_attach_dirent(). Reference to parent is released when the sd is released, so as long as reference to a sd is held, s_parent can be followed. dentry walk in sysfs_readdir() is convereted to s_parent walk. This will be used to reimplement symlink such that it uses only sysfs_dirent tree. Signed-off-by:
-
Tejun Heo authored
Currently there are four functions to create sysfs_dirent - __sysfs_new_dirent(), sysfs_new_dirent(), __sysfs_make_dirent() and sysfs_make_dirent(). Other than sysfs_make_dirent(), no function has two users if calls to implement other functions are excluded. This patch consolidates sysfs_dirent creation functions into the following two. * sysfs_new_dirent() : allocate and initialize * sysfs_attach_dirent() : attach to sysfs_dirent hierarchy and/or associate with dentry This simplifies interface and gives callers more flexibility. This is in preparation of object reference simplification. Signed-off-by:
-
Tejun Heo authored
Error handling in sysfs_rename_dir() was broken. * When lookup_one_len() fails, 0 is returned. * If parent inode check fails, returns with inode mutex and rename rwsem held. This patch fixes the above bugs and flattens error handling such that it's more readable and easier to modify. Signed-off-by:
-
Tejun Heo authored
Flatten cleanup paths in sysfs_add_link() and create_dir() to improve readability and ease further changes to these functions. This is in preparation of object reference simplification. Signed-off-by:
-
Tejun Heo authored
Error handling in fs/sysfs/bin.c:write() was wrong because size_t count is used to receive return value from flush_write() which is negative on failure. This patch updates write() such that int variable is used instead. read() is updated the same way for consistency. Signed-off-by:
-
Tejun Heo authored
Make sysfs_put() ignore NULL sd instead of oopsing. Signed-off-by:
-
Tejun Heo authored
sysfs used simple incrementing allocator which is not guaranteed to be unique. This patch makes sysfs use ida to give each sd a unique and packed inode number. Signed-off-by:
-
Tejun Heo authored
There is no reason this function should be inlined and soon to follow sysfs object reference simplification will make it heavier. Move it to dir.c. Signed-off-by:
-
Tejun Heo authored
Implement idr based id allocator. ida is used the same way idr is used but lacks id -> ptr translation and thus consumes much less memory. struct ida_bitmap is attached as leaf nodes to idr tree which is managed by the idr code. Each ida_bitmap is 128bytes long and contains slightly less than a thousand slots. ida is more aggressive with releasing extra resources acquired using ida_pre_get(). After every successful id allocation, ida frees one reserved idr_layer if possible. Reserved ida_bitmap is not freed automatically but only one ida_bitmap is reserved and it's almost always used right away. Under most circumstances, ida won't hold on to memory for too long which isn't actively used. Signed-off-by:
-
Tejun Heo authored
Separate out idr_mark_full() from sub_alloc() and make marking the allocated slot full the responsibility of idr_get_new_above_int(). Allocation part of idr_get_new_above_int() is renamed to idr_get_empty_slot(). New idr_get_new_above_int() allocates a slot using the function, install the user pointer and marks it full using idr_mark_full(). This change doesn't introduce any behavior change. This will be used by ida. Signed-off-by:
-
Tejun Heo authored
In sub_alloc(), when bitmap search fails, it goes up one level to continue search. This is done by updating the id cursor and searching the upper level again. If the cursor was at the end of the upper level, we need to go further than that. This wasn't implemented and when that happens the part of the cursor which indexes into the upper level wraps and sub_alloc() ends up searching the wrong bitmap. It allocates id which doesn't match the actual slot. This patch fixes this by restarting from the top if the search needs to go higher than one level. Signed-off-by:
-
Cornelia Huck authored
This converts code of the form if ((error = some_func())) goto fixup; to error = some_func(); if (error) goto fixup; Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Rafael J. Wysocki authored
The saved_state member of 'struct dev_pm_info' that's going to be removed is used in arch/arm/common/locomo.c, arch/arm/common/sa1111.c and arch/arm/mach-sa1100/neponset.c. Change the code in there to use local variables for saving the state of devices during suspend. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Rafael J. Wysocki authored
The checks if the device's parent is in the right state done in drivers/base/power/suspend.c and drivers/base/power/resume.c serve no particular purpose, since if the parent is in a wrong power state, the device's suspend or resume callbacks are supposed to return an error anyway. Moreover, they are also useless from the sanity checking point of view, because they rely on the code being checked to set dev->parent->power.power_state.event appropriately, which need not happen if that code is buggy. For these reasons they can be removed. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Rafael J. Wysocki authored
The suspend routines should be called for every device during a system sleep transition, regardless of the device's state, so that drivers can regard these method calls as notifications that the system is about to go to sleep, rather than as directives to put their devices into the 'off' state. This is documented in Documentation/power/devices.txt and is already done in the core resume code, so it seems reasonable to make the core suspend code behave accordingly. Signed-off-by:
-
Rafael J. Wysocki authored
The prev_state member of struct dev_pm_info (defined in include/linux/pm.h) is only used during a resume to check if the device's state before the suspend was 'off', in which case the device is not resumed. However, in such cases the decision whether or not to resume the device should be made on the driver level and the resume callbacks from the device's bus and class should be executed anyway (the may be needed for some things other than just powering on the device). Signed-off-by:
-
