- 18 May, 2020 22 commits
-
-
Steve Longerbeam authored
The entities external to the i.MX6 IPU and i.MX7 now create the links to their fwnode-endpoint connected entities in their notifier bound callbacks. Which means imx_media_create_of_links() and imx_media_create_csi_of_links() are no longer needed and are removed. However there is still one case in which imx-media needs to create fwnode-endpoint based links at probe completion. The v4l2-async framework does not allow multiple subdevice notifiers to contain a duplicate subdevice in their asd_list. Only the first subdev notifier that discovers and adds that one subdevice to its asd_list will receive a bound callback for it. Other subdevices that also have firmware endpoint connections to this duplicate subdevice will not have it in their asd_list, and thus will never receive a bound callback for it. In the case of imx-media, the one duplicate subdevice in question is the i.MX6 MIPI CSI-2 receiver. Until there is a solution to that problem, rewrite imx_media_create_links() to add the missing links from the CSI-2 receiver to the CSIs and CSI muxes. The function is renamed imx_media_create_csi2_links(). Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Steve Longerbeam authored
Fix the 1:1 port-id:pad-index assumption for the upstream subdevice, by searching the upstream subdevice's endpoints for one that maps to the pad's index. This is carried out by a new reverse mapping function imx_media_get_pad_fwnode(). Signed-off-by:
-
Steve Longerbeam authored
For i.MX5/6, if the bound subdev is a video mux, it must be one of the CSI muxes, and for i.MX7, the bound subdev must always be a CSI mux. So if the bound subdev is a video mux, mark it as a CSI mux with a new group id IMX_MEDIA_GRP_ID_CSI_MUX. In the process use the new group id in csi_get_upstream_endpoint(), and do some cleanup in that function for better readability. Suggested-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Steve Longerbeam authored
The function imx7_csi_get_upstream_endpoint() is not necessary for imx7. First, the imx7 CSI only receives from the CSI mux, so much of the code in there is pointless. Second, it is only used to determine whether the CSI mux has selected the CSI-2 input or the parallel input. This can be accomplished much more simply by getting the function type of selected input entity to the CSI mux. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the CSI sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the CSI sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the mipi csi-2 receiver sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the mipi csi-2 receiver sink pad. Signed-off-by:
-
Steve Longerbeam authored
Implement a notifier bound op to register media links from the remote sub-device's source pad(s) to the video-mux sink pad(s). Signed-off-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The i.MX7 CSI maps port numbers and pad indexes 1:1. Acked-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The imx7-mipi-csis maps port numbers and pad indexes 1:1. Signed-off-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The MIPI CSI-2 receiver maps port numbers and pad indexes 1:1. Signed-off-by:
-
Steve Longerbeam authored
Use v4l2_subdev_get_fwnode_pad_1_to_1() as the get_fwnode_pad operation. The video mux maps fwnode port numbers and pad indexes 1:1. Signed-off-by:
-
Steve Longerbeam authored
The CSI does not have a 1:1 relationship between fwnode port numbers and pad indexes. In fact the CSI fwnode device is itself a port which is the sink, containing only a single fwnode endpoint. Implement media_entity operation get_fwnode_pad to first verify the given endpoint is the CSI's sink endpoint, and if so return the CSI sink pad index. Signed-off-by:
-
Steve Longerbeam authored
media: Revert "media: v4l2-fwnode: Add a convenience function for registering subdevs with notifiers" The users of v4l2_async_register_fwnode_subdev() have switched to parsing their endpoints and setting up async sub-device lists in their notifiers locally, without using the endpoint parsing callbacks. There are no more users of v4l2_async_register_fwnode_subdev() so this convenience function can be removed. This reverts commit 1634f0ed. Signed-off-by:
-
Steve Longerbeam authored
Instead of using the convenience functions v4l2_async_notifier_parse_fwnode_endpoints*() or v4l2_async_register_fwnode_subdev(), parse the input endpoints and set up the async sub-devices without using callbacks. The drivers know which ports it must parse and how to handle unconnected remotes, so it makes the code simpler to transfer control of endpoint parsing to the driver. Signed-off-by:
-
Steve Longerbeam authored
Instead of using the convenience function v4l2_async_register_fwnode_subdev(), parse the video-mux input endpoints and set up the async sub-devices without using callbacks. The video-mux knows which ports it must parse (the input ports) and how to handle unconnected remotes, so it makes the code simpler to transfer control of endpoint parsing to the driver. Signed-off-by:
-
Steve Longerbeam authored
Add functions to create media links between source and sink subdevices, based on the fwnode endpoint connections between them: v4l2_create_fwnode_links_to_pad() - create links from a source subdev to a single sink pad based on fwnode endpoint connections. v4l2_create_fwnode_links() - create all links from a source to sink subdev based on fwnode endpoint connections. These functions can be used in a sink's v4l2-async notifier subdev bound callback to make the links from the bound subdev. Signed-off-by: -
Steve Longerbeam authored
Add a convenience function that can be used as the .get_fwnode_pad operation for subdevices that map port numbers and pad indexes 1:1. The function verifies the endpoint is owned by the subdevice, and if so returns the endpoint port number. Signed-off-by:
-
Steve Longerbeam authored
Add a missing pointer to the entity in the media_entity operation get_fwnode_pad. There are no implementers of this op yet, but a future entity that does so will almost certainly need a reference to itself to carry out the work. operation") Fixes: ae45cd5e ("[media] media: entity: Add get_fwnode_pad entity Signed-off-by:
-
Dafna Hirschfeld authored
When enumerating the frame sizes, the value sent to imx219_get_format_code should be fse->code (the code from the ioctl) and not imx219->fmt.code which is the code set currently in the driver. Fixes: 22da1d56 ("media: i2c: imx219: Add support for RAW8 bit bayer format") Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
Helen Koike <helen.koike@collabora.com> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Jacopo Mondi authored
Implement the get_selection pad operation for the IMX219 sensor driver. The supported targets report the sensor's native size, the crop default rectangle and the crop rectangle. Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
- 14 May, 2020 1 commit
-
-
Geert Uytterhoeven authored
Since its inclusion in v3.9, no users of the SuperH VEU mem2mem video processing driver have appeared upstream. All VEU devices in SuperH board code still bind to the "uio_pdrv_genirq" driver instead. The original author marked the driver orphaned in v3.15. Remove the driver; it can always be resurrected from git history when needed. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Landley <rob@landley.net> Acked-by:
-
- 12 May, 2020 13 commits
-
-
Colin Ian King authored
The variable status is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Colin Ian King authored
The variable result is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Jia-Ju Bai authored
In ttusb_dec_handle_irq(), buffer[4] is continuously read from memory three times, without being modified. To reduce the number of memory reads, buffer[4] is first assigned to a local variable index, and then index is used to replace buffer[4]. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Colin Ian King authored
The variable val is being initializeed with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Colin Ian King authored
The variable bw is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Sean Young authored
Some IR protocols do not use a carrier. Signed-off-by:
-
Sean Young authored
usleep_range() may take longer than the max argument due to scheduling, especially under load. This is causing random errors in the transmitted IR. Remove the usleep_range() in favour of busy-looping with udelay(). Signed-off-by:
-
Hans Verkuil authored
Add documentation for the new VIDIOC_SUBDEV_QUERYCAP ioctl. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
While normal video/radio/vbi/swradio nodes have a proper QUERYCAP ioctl that apps can call to determine that it is indeed a V4L2 device, there is currently no equivalent for v4l-subdev nodes. Adding this ioctl will solve that, and it will allow utilities like v4l2-compliance to be used with these devices as well. SUBDEV_QUERYCAP currently returns the version and capabilities of the subdevice. Define a capability flag to report if the subdevice is registered in read-only mode. Signed-off-by:
-
Jacopo Mondi authored
A sub-device device node can be registered in user space only if the CONFIG_VIDEO_V4L2_SUBDEV_API Kconfig option is selected. Currently the open/close file operations and the ioctl handler have some parts of their implementations guarded by #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API), while they are actually not accessible without a video device node registered to user space. Guard the whole open, close and ioctl handler and provide stubs if the VIDEO_V4L2_SUBDEV_API Kconfig option is not selected. This slightly reduces the kernel size when the option is not selected and simplifies the file ops and ioctl implementations. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Jacopo Mondi authored
Add to the V4L2 core a function to register device nodes for video subdevices in read-only mode. Registering a device node in read-only mode is useful to expose to userspace the current sub-device configuration, without allowing application to change it by using the V4L2 subdevice ioctls. Acked-by:
-
Jacopo Mondi authored
Document a new kAPI function to register subdev device nodes in read only mode and for each affected ioctl report how access is restricted. Acked-by:
-
Jacopo Mondi authored
Update the V4L2 sub-device userspace API introduction to provide more details on why complex devices might want to register devnodes for the connected subdevices. Acked-by:
-
- 06 May, 2020 4 commits
-
-
Mauro Carvalho Chehab authored
Sphinx 2.4.4 produces this warning: Documentation/admin-guide/media/ipu3.rst:235: WARNING: Title underline too short. Acked-by:
-
Hans Verkuil authored
Rework the documentation to make it easier for the reader to understand the differences in behavior of this ioctl between MC and non-MC drivers. Note the addition of the 'video-node-centric' and 'MC-centric' terms to help understand what the IO_MC capability really means. Also mention in the beginning that mbus_code is one of the fields that application should initialize, and add META_OUTPUT as one of the types that this ioctl supports (that was never added here when the META_OUTPUT buffer type was added). Finally document that EINVAL will be returned if mbus_code is unsupported. Fixes: e5b6b07a ("media: v4l2: Extend VIDIOC_ENUM_FMT to support MC-centric devices") Signed-off-by:
-
Niklas Söderlund authored
Set the V4L2_CAP_IO_MC capability flag to report this vimc inputs/outputs are controlled by the media graph. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Niklas Söderlund authored
Set the V4L2_CAP_IO_MC capability flag and remove the driver specific vidioc_enum_{input,output}, vidioc_g_{input,output} and vidioc_s_{input,output} callbacks. Signed-off-by:
-
