- 25 Apr, 2011 29 commits
-
-
Sujith Manoharan authored
Set the maximum ampdu size of a station correctly in the target by using the ampdu_factor. Signed-off-by:
Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
* Register the driver's maximum ampdu subframe limit to mac80211. * Cleanup the target capabilities structure and fix an endian issue. * Fix BTCOEX by sending a command to the target when the BT priority changes. * Bump the required firmware version to 1.1 Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Rafał Miłecki authored
Default min_msk on my 0x4312 is 0x80000CBB, not 0xCBB. Now we follow specs and wl (noticed in MMIO dumps). Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
AR9340 is a AR9003 family built-in 2x2 wmac of ar934x SOCs. It is single band in ar9341 SOC and dual band in ar9344/ar9342 SOCs. Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Use hw supported chains instead of hard coded values. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Add a bool in ath9k_platform_data to pass AHB clock speed information. Driver needs this to configure PLL on some SOCs. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
John W. Linville authored
Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
-
-
- 22 Apr, 2011 10 commits
-
-
Johannes Berg authored
This variable is only ever checked right after the function that sets it, but the same function will also return the status, so we can pass it through instead of checking hw_ready later. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com>
-
Johannes Berg authored
On new hardware, ucode images always come in pairs: code and data. Therefore, combine the variables into an appropriate struct and use that when both code and data are needed. Also, combine allocation and copying so that we have less code in total. Signed-off-by:
-
Johannes Berg authored
The current firmware loading mechanism in iwlwifi is very hard to follow, and thus hard to maintain. To make it easier, make the firmware loading synchronous. For now, as a side effect, this removes a number of retry possibilities we had. It isn't typical for this to fail, but if it does happen we restart from scratch which this also makes easier to do should it be necessary. Signed-off-by:
-
Johannes Berg authored
When the firmware encounters an error while the driver is waiting for a notification, it will never get that notification. Therefore, instead of timing out, bail out on errors when waiting for notifications. Signed-off-by:
-
Johannes Berg authored
We're unlikely to care about the actual time spent waiting, so make the function return an error code which is less error prone in coding new uses. Also, while at it, mark __must_check. Signed-off-by:
-
Johannes Berg authored
A notification wait function is called with the command, but currently has no way of passing data back to the caller -- fix that by adding a void pointer to the function that can be used between the caller and the function. Signed-off-by:
-
Johannes Berg authored
Starting the device consists of many things, refactor out enabling the hardware and also return -ERFKILL when the rfkill signal is found to be asserted (which makes more sense anyway, but is also required now to make the __iwl_up function return right away.) Signed-off-by:
-
Johannes Berg authored
The iwl_down path really consists of multiple things, refactor out the hardware resetting (including, of course, related software state like irqs). Signed-off-by:
-
Johannes Berg authored
There's no point in running through iwl_down() when we never registered with mac80211, as it just cleans up internal structures that were never initialised in this case. Therefore we can also remove the special handling for this case from __iwl_down(). Signed-off-by:
-
Johannes Berg authored
The current code to read the error table header just hardcodes all the offsets, which is a bit hard to understand. We can read in the entire header (as much as we need) into a structure, and then take the data from there, which makes it easier to understand. To read a bigger blob we also don't need to grab NIC access for each word read, making the code more efficient. Signed-off-by:
-
- 19 Apr, 2011 1 commit
-
-
Johannes Berg authored
Apparently this was confusing still ... add a note that the byte is needed as padding. Signed-off-by:
-
