- 09 Aug, 2017 13 commits
-
-
Edward Cree authored
Unifies adjusted and unadjusted register value types (e.g. FRAME_POINTER is now just a PTR_TO_STACK with zero offset). Tracks value alignment by means of tracking known & unknown bits. This also replaces the 'reg->imm' (leading zero bits) calculations for (what were) UNKNOWN_VALUEs. If pointer leaks are allowed, and adjust_ptr_min_max_vals returns -EACCES, treat the pointer as an unknown scalar and try again, because we might be able to conclude something about the result (e.g. pointer & 0x40 is either 0 or 0x40). Verifier hooks in the netronome/nfp driver were changed to match the new data structures. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Aug, 2017 27 commits
-
-
David Ahern authored
Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Declare this structure as const as it is only used during a copy operation. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Arkadi Sharshevsky says: ==================== Update DSA's FDB API and perform switchdev cleanup The patchset adds support for configuring static FDB entries via the switchdev notification chain. The current method for FDB configuration uses the switchdev's bridge bypass implementation. In order to support this legacy way and to perform the switchdev cleanup, the implementation is moved inside DSA. The DSA drivers cannot sync the software bridge with hardware learned entries and use the switchdev's implementation of bypass FDB dumping. Because they are the only ones using this functionality, the fdb_dump implementation is moved from switchdev code into DSA. Finally after this changes a major cleanup in switchdev can be done. Please see individual patches for patch specific change logs. v1->v2 - Split MDB/vlan dump removal into core/driver removal. v2->v3 - The self implementation for FDB add/del is moved inside DSA. ==================== Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Currently the bridge port flags, vlans, FDBs and MDBs can be offloaded through the bridge code, making the switchdev's SELF bridge bypass implementation to be redundant. This implies several changes: - No need for dump infra in switchdev, DSA's special case is handled privately. - Remove obj_dump from switchdev_ops. - FDBs are removed from obj_add/del routines, due to the fact that they are offloaded through the bridge notification chain. - The switchdev_port_bridge_xx() and switchdev_port_fdb_xx() functions can be removed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
At this point no driver supports FDB add/del through switchdev object but rather via notification chain, thus, it is removed. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Currently the MDB HW database is synced with the bridge's one, thus, There is no need to support special dump functionality. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
This is done as a preparation before removing support for MDB dump from DSA core. The MDBs are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
The bridge port attributes/vlan for DSA devices should be set only from bridge code. Furthermore, The vlans are synced totally with the bridge so there is no need for special dump support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
The DSA drivers do not support bridge flags offload. Yet, this attribute should be added in order for the bridge to fail when one tries set a flag on the port, as explained in commit dc0ecabd ("net: switchdev: Add support for querying supported bridge flags by hardware"). Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Currently DSA uses switchdev's implementation of FDB add/del ndos. This patch moves the implementation inside DSA in order to support the legacy way for static FDB configuration. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Add support for learning FDB through notification. The driver defers the hardware update via ordered work queue. In case of a successful FDB add a notification is sent back to bridge. In case of hw FDB del failure the static FDB will be deleted from the bridge, thus, the interface is moved to down state in order to indicate inconsistent situation. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
Currently, the switchdev objects are embedded inside the DSA notifier info. This patch removes this dependency. This is done as a preparation stage before adding support for learning FDB through the switchdev notification chain. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arkadi Sharshevsky authored
In order to support FDB add/del to be on a notifier chain the slave API need to be changed to be switchdev independent. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Make hdlcdrv_ops structures const as they are only passed to hdlcdrv_register function. The corresponding argument is of type const, so make the structures const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Quoting Ilan Tayari: 1. Set up a host-to-host IPSec tunnel (or transport, doesn't matter) 2. Ping over IPSec, or do something to populate the pcpu cache 3. Join a MC group, then leave MC group 4. Try to ping again using same CPU as before -> traffic doesn't egress the machine at all Ilan debugged the problem down to the fact that one of the path dsts devices point to lo due to earlier dst_dev_put(). In this case, dst is marked as DEAD and we cannot reuse the bundle. The cache only asserted that the requested policy and that of the cached bundle match, but its not enough - also verify the path is still valid. Fixes: ec30d78c ("xfrm: add xdst pcpu cache") Reported-by: Ayham Masood <ayhamm@mellanox.com> Tested-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: remove useless arguments Several DSA core setup functions take many arguments, mostly because of the legacy code. This patch series removes the useless args of these functions, where either the dsa_switch or dsa_port argument is enough. Changes in v2: - ds->dev is already assigned by dsa_switch_alloc ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
dsa_slave_create currently takes 4 arguments while it only needs the related dsa_port and its name. Remove all other arguments. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
dsa_cpu_dsa_setup currently takes 4 arguments but they are all available from the dsa_port argument. Remove all others. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
dsa_switch_alloc() already assigns ds-dev, which can be used in dsa_switch_setup_one and dsa_cpu_dsa_setups instead of requiring an additional struct device argument. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err error message and also split overly long line to avoid a checkpatch warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Egil Hjelmeland says: ==================== Refactor lan9303_xxx_packet_processing This series is purely non functional. It changes the lan9303_enable_packet_processing, lan9303_disable_packet_processing() to pass port number (0,1,2) as parameter instead of port offset. This aligns them with other functions in the module, and makes it possible to simplify the code. The lan9303_enable_packet_processing, lan9303_disable_packet_processing functions operate on port. Therefore rename the functions to reflect that as well. Reviewer pointed out lan9303_get_ethtool_stats would be better off with the use of a lan9303_read_switch_port(). So that was added to the series. Changes v3 -> v4: - Whitespace adjustments. Changes v2 -> v3: - Patch 1: Removed the change in lan9303_get_ethtool_stats - Added patch 4: rename lan9303_xxx_packet_processing - Added patch 5: refactor lan9303_get_ethtool_stats Changes v1 -> v2: - introduced lan9303_write_switch_port() in first patch - inserted LAN9303_NUM_PORTS patch - Use LAN9303_NUM_PORTS in last patch. Plus whitespace change. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Egil Hjelmeland authored
In lan9303_get_ethtool_stats: Get rid of 0x400 constant magic by using new lan9303_read_switch_reg() inside loop. Reduced scope of two variables. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Egil Hjelmeland authored
The lan9303_enable_packet_processing, lan9303_disable_packet_processing functions operate on port, so the names should reflect that. And to align with lan9303_disable_processing(), rename: lan9303_enable_packet_processing -> lan9303_enable_processing_port lan9303_disable_packet_processing -> lan9303_disable_processing_port Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Egil Hjelmeland authored
Simplify usage of lan9303_enable_packet_processing, lan9303_disable_packet_processing() Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-