Patch from Robert Love.

This patch implements for_each_pgdat(pg_data_t *) which is a helper
macro to cleanup code that does a loop of the form:

        pgdat = pgdat_list;
        while(pgdat) {
	        /* ... */
	        pgdat = pgdat->node_next;
	}

and replace it with:

	for_each_pgdat(pgdat) {
		/* ... */
	}

This code is from Rik's 2.4-rmap patch and is by William Irwin.

Reorganise the members of struct page.

- Place ->flags at the start so the compiler can generate indirect
  addressing rather than indirect+indexed for this commonly-accessed
  field.  Shrinks the kernel by ~100 bytes.

- Keep ->count with ->flags so they have the best chance of
  being in the same cacheline.

ifdef out some operations in pte_chain_lock() which are not necessary
on uniprocessor.

Cleanup to show_free_areas() from Bill Irwin:

show_free_areas() and show_free_areas_core() is a mess.
(1) it uses a bizarre and ugly form of list iteration to walk buddy lists
        use standard list functions instead
(2) it prints the same information repeatedly once per-node
        rationalize the braindamaged iteration logic
(3) show_free_areas_node() is useless and not called anywhere
        remove it entirely
(4) show_free_areas() itself just calls show_free_areas_core()
        remove show_free_areas_core() and do the stuff directly
(5) SWAP_CACHE_INFO is always #defined, remove it
(6) INC_CACHE_INFO() doesn't use the do { } while (0) construct

This patch also includes Matthew Dobson's patch which removes
mm/numa.c:node_lock.  The consensus is that it doesn't do anything now
that show_free_areas_node() isn't there.

Patch from Bill Irwin.

It removes the custom pte_chain allocator in mm/rmap.c and replaces it
with a slab cache.

"This patch
 (1) eliminates the pte_chain_freelist_lock and all contention on it
 (2) gives the VM the ability to recover unused pte_chain pages

 Anton Blanchard has reported (1) from prior incarnations of this patch.
 Craig Kulesa has reported (2) in combination with slab-on-LRU patches.

 I've left OOM detection out of this patch entirely as upcoming patches
 will do real OOM handling for pte_chains and all the code changed anyway."

There are a few VM-related patches in this series.  Mainly fixes;
feature work is on hold.

We have some fairly serious locking contention problems with the reverse
mapping's pte_chains.  Until we have a clear way out of that I believe
that it is best to not merge code which has a lot of rmap dependency.

It is apparent that these problems will not be solved by tweaking -
some redesign is needed.  In the 2.5 timeframe the only practical
solution appears to be page table sharing, based on Daniel's February
work.  Daniel and Dave McCracken are working that.

Some bits and pieces here:

- list_splice() has an open-coded list_empty() in it.  Use
  list_empty() instead.

- in shrink_cache() we have a local `nr_pages' which shadows another
  local.  Rename the inner one.  (Nikita Danilov)

- Add a BUG() on a can't-happen code path in page_remove_rmap().

- Tighten up the bug checks in the BH completion handlers - if the
  buffer is still under IO then it must be locked, because we unlock it
  inside the page_uptodate_lock.

in the page cache, it needs to use page_cache_release()
instead of plain "put_page()".

the attached patch fixes two things:

 - a TLS related bug noticed by Arjan van de Ven: apm_init() should set up
   all CPU's gdt entries - just in case some code happens to call in the
   APM BIOS on the wrong CPU. This should also handle the case when some
   APM code gets triggered (by suspend or power button or something).

 - compilation problem

Add support for the glibc 'd_type' field in cases where we have the
READDIRPLUS file attribute information available to us in
nfs_do_filldir().

Add support for positive lookups using the READDIRPLUS cached
information. Both new lookups and lookup revalidation is supported.

Use READDIRPLUS instead of READDIR on NFSv3 directories with lengths
shorter than 8*PAGE_SIZE.

Note that inode attribute information is only updated if it is seen to
be more recent than any existing cached information.

Cache the information about whether or not the server supports
READDIRPLUS.

Cleanup for readdirplus. Allow the file attribute struct to set the
NFS_READTIME(inode) to some value other than 'jiffies'.

Cleanup for the readdirplus code. Make struct nfs_entry take pointers
to the filehandle and file attributes.

A patch by Charles Lever (Charles.Lever@netapp.com) that ensures the
PG_uptodate bit gets set if an entire page gets written by
nfs_writepage_sync().

This patch replaces the cli/sti calls in the trident.c driver with
spin_lock_irqsave/spin_unlock_irqrestore.

This patch (1/2) brings the sound/oss/trident.c driver up to date with
the driver in the 2.4-ac tree. It fixes the following bugs:

* fix wrong cast in suspend/resume (Eric Lemar via Ian Soboroff)

* fix bug where we would free with free_pages() memory allocated via
pci_alloc_consistent().

* add a missing unlock on an error path.

* rewrite the code to read/write registers of audio codecs for Ali5451
(Lei Hu)

It also does various cleanups so that the code conforms to
Documentation/CodingStyle and is nicer to work with.

into home.transmeta.com:/home/torvalds/v2.5/linux

The gdt entry is consulted only while loading its index into
the segment register.

So load_TLS_desc(next, cpu) must be called before loading
next->fs,next->gs in __switch_to().

generic spinlock implementation for downgrade_write().

into samba.org:/home/paulus/kernel/for-linus-ppc

into samba.org:/home/paulus/kernel/for-linus-ppc

Since we have a signed 32-bit time_t, the fact that y % 4 == 0
will get it wrong in 2100 is irrelevant.

into home.transmeta.com:/home/torvalds/v2.5/linux

test, since it is needed regardless.

We use the pci host lock so that we lock config space portably while
handling the CMD640 config space via our own routines to avoid pci bios
tripping CMD640 hardware stuff. We need to use this lock in order to
ensure that we lock at a portable layer. Also add the 2.4.19 fixes for
avoiding wrong probes, and the fix noted on the list.

This should do the trick for pnpbios - we load the initial gdt into each
gdt, and we load the parameters into the gdt of the cpu making the call
relying on the spinlock to avoid bouncing cpu due to pre-empt

 - Remove third argument from file_lock security op.  Whether the lock is
   blocking or not cannot make any difference to a security module!
 - Fix the call in sys_flock to pass the translated lock command, not the
   original.
 - Add a call in fcntl_setlease.  If they're going to know about two types
   of lock, let's tell them about the third too.

The patch below does two things:

(i) fixes a small bug in the new partition code
This is the final chunk s/n/slot/. I'll refrain from giving a vi script.
This is uncontroversial.

(ii) removes ancient garbage concerning disk managers
This may well be controversial.

(Long ago, when disks became larger than 500 MB, lots of tricks were
invented to keep DOS happy. Both hardware tricks and software tricks.
One of the software tricks was the invention of boot managers.
There have been many of those. The Linux kernel has had support
for two of them: OnTrack Disk Manager and EZdrive.
More precisely: there have been many versions of both OnTrack Disk Manager
and EZdrive, and the kernel had support for a few of these versions.

I think the time has come to remove the automatic support - every now
and then it bites some innocent user, and the support is not really
needed any longer, and the support is for outdated versions of these
boot managers.

No doubt it will turn out that users still exist that use some form
of this stuff, but I would prefer to support them by explicit
kernel boot parameters, rather than by code that guesses what
might be the right thing to do.

The patch below just rips out the old stuff. Depending on the screams
this might provoke I expect to add some boot parameters.)

This fixes a synchronize_irq() bug: if the interrupt is freed while an
IRQ handler is running (irq state is IRQ_INPROGRESS) then
synchronize_irq() will return early, which is incorrect.

there was another do_IRQ() bug that in fact necessiated the bad code that
caused the synchronize_irq() bug - we kept the IRQ_INPROGRESS bit set for
not active interrupt sources - after they happen for the first time. Now
the only effect this has is on i8259A irq handling - we used to keep these
irqs disabled after the first 'spurious' interrupt happened.  Now what the
i8259A code really wants to do IMO is to keep the interrupt disabled if
there is no handler defined for that interrupt source. The patch adds
exactly this. I dont remember why this was needed in the first place (irq
probing? avoidance of interrupt storms?), but with the patch the behavior
should be equivalent.

Fix PMD typo

Added irq-argument to synchronize_irq to make sound/oss/cs46xx.c
compile again.

the attached patch fixes the scheduler's migration thread startup bug that
got unearthed by Rusty's recent CPU-startup enhancements.

the fix is to let a startup-helper thread migrate the migration thread,
instead of the migration thread calling set_cpus_allowed() itself.
Migrating a not running thread is a simple and robust thing, and needs no
cooperation from migration threads - thus the catch-22 problem of how to
migrate the migration threads is solved finally.

the patch is against Rusty's initcall fix/hack which calls
migration_init() before other CPUs are brought up - this ordering is
clearly the clean way of doing migration init. [the patch also fixes a UP
compiliation bug in Rusty's hack.]

As pointed out by Andrew Morton, this fixes:
	softirq.c: In function `spawn_ksoftirqd':
	softirq.c:416: warning: statement with no effect

This patch fixes the calls to initialize ksoftirqd and the
migration threads.  This really should be done by the initcall
depends patch.

 The check in do_alignment_ldmstm for addr and eaddr being the same is #ifdef'd
out for the ARM922T because they aren't expected to be the same due to the 
different way the MMU sets addr. The ARM920T is just a 922T with more cache, 
and should be treated the same. I've checked on a real ARM920T and it does 
complain loudly every time it fixes up a misaligned ldm/stm unless this 
patch is applied.
 I suspect that the ARM926 should be treated the same way as well, but I can't
find any relevant documentation on ARM's web-site, so have left it out. 

Remove a couple of needless includes from system3.c, and update
mach-types file.

free_pages() oopses if page->mapping is non-NULL.  Ensure that any
rmap datastructures for the page are freed before freeing the
concerned page.