- 06 Aug, 2018 8 commits
-
-
Michael Chan authored
The BNXT_FLAG_NEW_RM flag is checked a lot in the code to determine if the new resource manager is in effect. Define a macro to perform this check. Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
Add support to collect live firmware coredump via ethtool. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Set the default hash mode flag in HWRM_VNIC_RSS_CFG to signal to the firmware that the driver is compliant with the latest spec. With that, the firmware can return expanded RSS profile IDs that the driver checks to setup the proper gso_type for GRO-HW packets. But instead of checking for the new profile IDs, we check the IP_TYPE flag in TPA_START which is more straight forward than checking a list of profile IDs. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The new mode is "minimal-static" to be used when resources are more limited to support a large number of VFs, for example The PF driver will provision guaranteed minimum resources of 0. Each VF has no guranteed resources until it tries to reserve resources during device open. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
During hotplug, the driver's open function can be called almost immediately after power on reset. The PHY may not be ready and the firmware may return failure when the driver tries to update PHY settings. Add retry logic fired from the driver's timer to retry the operation for 5 seconds. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add code to detect firmware support for external loopback and the extra test entry for external loopback. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The driver gathers statistics using 2 mechanisms. Some stats are DMA'ed directly from hardware and others are polled from the driver's timer. Currently, we only adjust the DMA frequency based on the ethtool stats-block-usecs setting. This patch adjusts the driver's timer frequency as well to make everything consistent. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
New interface has firmware core dump support, new extended port statistics, and IF state change notifications to the firmware. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Aug, 2018 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree: 1) Support for transparent proxying for nf_tables, from Mate Eckl. 2) Patchset to add OS passive fingerprint recognition for nf_tables, from Fernando Fernandez. This takes common code from xt_osf and place it into the new nfnetlink_osf module for codebase sharing. 3) Lightweight tunneling support for nf_tables. 4) meta and lookup are likely going to be used in rulesets, make them direct calls. From Florian Westphal. A bunch of incremental updates: 5) use PTR_ERR_OR_ZERO() from nft_numgen, from YueHaibing. 6) Use kvmalloc_array() to allocate hashtables, from Li RongQing. 7) Explicit dependencies between nfnetlink_cttimeout and conntrack timeout extensions, from Harsha Sharma. 8) Simplify NLM_F_CREATE handling in nf_tables. 9) Removed unused variable in the get element command, from YueHaibing. 10) Expose bridge hook priorities through uapi, from Mate Eckl. And a few fixes for previous Netfilter batch for net-next: 11) Use per-netns mutex from flowtable event, from Florian Westphal. 12) Remove explicit dependency on iptables CT target from conntrack zones, from Florian. 13) Fix use-after-free in rmmod nf_conntrack path, also from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Lots of overlapping changes, mostly trivial in nature. The mlxsw conflict was resolving using the example resolution at: https://github.com/jpirko/linux_mlxsw/blob/combined_queue/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.cSigned-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix, which addresses boot failures on machines which do not report EBDA correctly, which can place the trampoline into reserved memory regions. Validating against E820 prevents that" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/compressed/64: Validate trampoline placement against E820
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two oneliners addressing NOHZ failures: - Use a bitmask to check for the pending timer softirq and not the bit number. The existing code using the bit number checked for the wrong bit, which caused timers to either expire late or stop completely. - Make the nohz evaluation on interrupt exit more robust. The existing code did not re-arm the hardware when interrupting a running softirq in task context (ksoftirqd or tail of local_bh_enable()), which caused timers to either expire late or stop completely" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: Fix missing tick reprogram when interrupting an inline softirq nohz: Fix local_timer_softirq_pending()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A set of fixes for perf: Kernel side: - Fix the hardcoded index of extra PCI devices on Broadwell which caused a resource conflict and triggered warnings on CPU hotplug. Tooling: - Update the tools copy of several files, including perf_event.h, powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and x86's memcpy_64.s (used in 'perf bench mem'), silencing the respective warnings during the perf tools build. - Fix the build on the alpine:edge distro" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix hardcoded index of Broadwell extra PCI devices perf tools: Fix the build on the alpine:edge distro tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' tools headers uapi: Refresh linux/bpf.h copy tools headers powerpc: Update asm/unistd.h copy to pick new tools headers uapi: Update tools's copy of linux/perf_event.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single bugfix for the irq core to prevent silent data corruption and malfunction of threaded interrupts under certain conditions" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Make force irq threading setup more robust
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Handle frames in error situations properly in AF_XDP, from Jakub Kicinski. 2) tcp_mmap test case only tests ipv6 due to a thinko, fix from Maninder Singh. 3) Session refcnt fix in l2tp_ppp, from Guillaume Nault. 4) Fix regression in netlink bind handling of multicast gruops, from Dmitry Safonov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netlink: Don't shift on 64 for ngroups net/smc: no cursor update send in state SMC_INIT l2tp: fix missing refcount drop in pppol2tp_tunnel_ioctl() mlxsw: core_acl_flex_actions: Remove redundant mirror resource destruction mlxsw: core_acl_flex_actions: Remove redundant counter destruction mlxsw: core_acl_flex_actions: Remove redundant resource destruction mlxsw: core_acl_flex_actions: Return error for conflicting actions selftests/bpf: update test_lwt_seg6local.sh according to iproute2 drivers: net: lmc: fix case value for target abort error selftest/net: fix protocol family to work for IPv4. net: xsk: don't return frames via the allocator on error tools/bpftool: fix a percpu_array map dump problem
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull usercopy whitelisting fix from Kees Cook: "Bart Massey discovered that the usercopy whitelist for JFS was incomplete: the inline inode data may intentionally "overflow" into the neighboring "extended area", so the size of the whitelist needed to be raised to include the neighboring field" * tag 'usercopy-fix-v4.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: jfs: Fix usercopy whitelist for inline inode data
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs bugfix from Darrick Wong: "One more patch for 4.18 to fix a coding error in the iomap_bmap() function introduced in -rc1: fix incorrect shifting" * tag 'xfs-4.18-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fs: fix iomap_bmap position calculation
-
Linus Torvalds authored
It turns out that commit 721c7fc7 ("block: fail op_is_write() requests to read-only partitions"), while obviously correct, causes problems for some older lvm2 installations. The reason is that the lvm snapshotting will continue to write to the snapshow COW volume, even after the volume has been marked read-only. End result: snapshot failure. This has actually been fixed in newer version of the lvm2 tool, but the old tools still exist, and the breakage was reported both in the kernel bugzilla and in the Debian bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200439 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900442 The lvm2 fix is here https://sourceware.org/git/?p=lvm2.git;a=commit;h=a6fdb9d9d70f51c49ad11a87ab4243344e6701a3 but until everybody has updated to recent versions, we'll have to weaken the "never write to read-only partitions" check. It now allows the write to happen, but causes a warning, something like this: generic_make_request: Trying to write to read-only block-device dm-3 (partno X) Modules linked in: nf_tables xt_cgroup xt_owner kvm_intel iwlmvm kvm irqbypass iwlwifi CPU: 1 PID: 77 Comm: kworker/1:1 Not tainted 4.17.9-gentoo #3 Hardware name: LENOVO 20B6A019RT/20B6A019RT, BIOS GJET91WW (2.41 ) 09/21/2016 Workqueue: ksnaphd do_metadata RIP: 0010:generic_make_request_checks+0x4ac/0x600 ... Call Trace: generic_make_request+0x64/0x400 submit_bio+0x6c/0x140 dispatch_io+0x287/0x430 sync_io+0xc3/0x120 dm_io+0x1f8/0x220 do_metadata+0x1d/0x30 process_one_work+0x1b9/0x3e0 worker_thread+0x2b/0x3c0 kthread+0x113/0x130 ret_from_fork+0x35/0x40 Note that this is a "revert" in behavior only. I'm leaving alone the actual code cleanups in commit 721c7fc7, but letting the previously uncaught request go through with a warning instead of stopping it. Fixes: 721c7fc7 ("block: fail op_is_write() requests to read-only partitions") Reported-and-tested-by: WGH <wgh@torlan.ru> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dmitry Safonov authored
It's legal to have 64 groups for netlink_sock. As user-supplied nladdr->nl_groups is __u32, it's possible to subscribe only to first 32 groups. The check for correctness of .bind() userspace supplied parameter is done by applying mask made from ngroups shift. Which broke Android as they have 64 groups and the shift for mask resulted in an overflow. Fixes: 61f4b237 ("netlink: Don't shift with UB on nlk->ngroups") Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-08-05 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix bpftool percpu_array dump by using correct roundup to next multiple of 8 for the value size, from Yonghong. 2) Fix in AF_XDP's __xsk_rcv_zc() to not returning frames back to allocator since driver will recycle frame anyway in case of an error, from Jakub. 3) Fix up BPF test_lwt_seg6local test cases to final iproute2 syntax, from Mathieu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Aug, 2018 9 commits
-
-
Florian Fainelli authored
Android's header sanitization tool chokes on static inline functions having a trailing semicolon, leading to an incorrectly parsed header file. While the tool should obviously be fixed, also fix the header files for the two affected functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf(). Fixes: 8cf6f497 ("ethtool: Add helper routines to pass vf to rx_flow_spec") Reporetd-by: Blair Prescott <blair.prescott@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
zhong jiang says: ==================== Use ARRAY_SIZE to replace computing the size zhong jiang (2): net:usb: Use ARRAY_SIZE instead of calculating the array size include/net/bond_3ad: Simplify the code by using the ARRAY_SIZE ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
We prefer to ARRAY_SIZE rather than the open code to calculate size. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
We use ARRAY_SIZE to replace open code sizeof(lan78xx_regs) / sizeof(u32). It make the code concise. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
0x3ff in tun_hashfn is mask of TUN_NUM_FLOW_ENTRIES, instead of hardcode, define a macro to setup the relationship with TUN_NUM_FLOW_ENTRIES Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
If a writer blocked condition is received without data, the current consumer cursor is immediately sent. Servers could already receive this condition in state SMC_INIT without finished tx-setup. This patch avoids sending a consumer cursor update in this case. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jia-Ju Bai authored
vnic_dev_register(), vnic_rq_alloc_bufs() and vnic_wq_alloc_bufs() are never called in atomic context. They call kzalloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
These semicolons are not needed. Just remove them. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kees Cook authored
Bart Massey reported what turned out to be a usercopy whitelist false positive in JFS when symlink contents exceeded 128 bytes. The inline inode data (i_inline) is actually designed to overflow into the "extended area" following it (i_inline_ea) when needed. So the whitelist needed to be expanded to include both i_inline and i_inline_ea (the whole size of which is calculated internally using IDATASIZE, 256, instead of sizeof(i_inline), 128). $ cd /mnt/jfs $ touch $(perl -e 'print "B" x 250') $ ln -s B* b $ ls -l >/dev/null [ 249.436410] Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLUB object 'jfs_ip' (offset 616, size 250)! Reported-by: Bart Massey <bart.massey@gmail.com> Fixes: 8d2704d3 ("jfs: Define usercopy region in jfs_ip slab cache") Cc: Dave Kleikamp <shaggy@kernel.org> Cc: jfs-discussion@lists.sourceforge.net Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
-
- 03 Aug, 2018 10 commits
-
-
YueHaibing authored
variable 'err' is unmodified after initalization, so simply cleans up it and returns 0. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jason Baron authored
Applications use -ECONNREFUSED as returned from write() in order to determine that a socket should be closed. However, when using connected dgram unix sockets in a poll/write loop, a final POLLOUT event can be missed when the remote end closes. Thus, the poll is stuck forever: thread 1 (client) thread 2 (server) connect() to server write() returns -EAGAIN unix_dgram_poll() -> unix_recvq_full() is true close() ->unix_release_sock() ->wake_up_interruptible_all() unix_dgram_poll() (due to the wake_up_interruptible_all) -> unix_recvq_full() still is true ->free all skbs Now thread 1 is stuck and will not receive anymore wakeups. In this case, when thread 1 gets the -EAGAIN, it has not queued any skbs otherwise the 'free all skbs' step would in fact cause a wakeup and a POLLOUT return. So the race here is probably fairly rare because it means there are no skbs that thread 1 queued and that thread 1 schedules before the 'free all skbs' step. This issue was reported as a hang when /dev/log is closed. The fix is to signal POLLOUT if the socket is marked as SOCK_DEAD, which means a subsequent write() will get -ECONNREFUSED. Reported-by: Ian Lance Taylor <iant@golang.org> Cc: David Rientjes <rientjes@google.com> Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
[...] net/netfilter/nft_tunnel.c:117:25: expected unsigned int [unsigned] [usertype] flags net/netfilter/nft_tunnel.c:117:25: got restricted __be16 [usertype] <noident> [...] net/netfilter/nft_tunnel.c:246:33: expected restricted __be16 [addressable] [assigned] [usertype] tp_dst net/netfilter/nft_tunnel.c:246:33: got int Fixes: af308b94 ("netfilter: nf_tables: add tunnel support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Two vmx bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: vmx: fix vpid leak KVM: vmx: use local variable for current_vmptr when emulating VMPTRST
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this removes the discouraged use of AHASH_REQUEST_ON_STACK (and associated VLA) by switching to shash directly and keeping the associated descriptor allocated with the regular state on the heap. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Push iov_iter up from rxrpc_kernel_recv_data() to its caller to allow non-contiguous iovs to be passed down, thereby permitting file reading to be simplified in the AFS filesystem in a future patch. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
If 'session' is not NULL and is not a PPP pseudo-wire, then we fail to drop the reference taken by l2tp_session_get(). Fixes: ecd012e4 ("l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Fix ACL actions error condition handling Nir says: Two issues were lately noticed within mlxsw ACL actions error condition handling. The first patch deals with conflicting actions such as: # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 flower skip_sw dst_ip 192.168.101.1 \ action goto chain 100 \ action mirred egress redirect dev swp4 The second action will never execute, however SW model allows this configuration, while the mlxsw driver cannot allow for it as it implements actions in sets of up to three actions per set with a single termination marking. Conflicting actions create a contradiction over this single marking and thus cannot be configured. The fix replaces a misplaced warning with an error code to be returned. Patches 2-4 fix a condition of duplicate destruction of resources. Some actions require allocation of specific resource prior to setting the action itself. On error condition this resource was destroyed twice, leading to a crash when using mirror action, and to a redundant destruction in other cases, since for error condition rule destruction also takes care of resource destruction. In order to fix this state a symmetry in behavior is added and resource destruction also takes care of removing the resource from rule's resource list. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nir Dotan authored
In previous patch mlxsw_afa_resource_del() was added to avoid a duplicate resource detruction scenario. For mirror actions, such duplicate destruction leads to a crash as in: # tc qdisc add dev swp49 ingress # tc filter add dev swp49 parent ffff: \ protocol ip chain 100 pref 10 \ flower skip_sw dst_ip 192.168.101.1 action drop # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 \ flower skip_sw dst_ip 192.168.101.1 action goto chain 100 \ action mirred egress mirror dev swp4 Therefore add a call to mlxsw_afa_resource_del() in mlxsw_afa_mirror_destroy() in order to clear that resource from rule's resources. Fixes: d0d13c18 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nir Dotan authored
Each tc flower rule uses a hidden count action. As counter resource may not be available due to limited HW resources, update _counter_create() and _counter_destroy() pair to follow previously introduced symmetric error condition handling, add a call to mlxsw_afa_resource_del() as part of the counter resource destruction. Fixes: c18c1e18 ("mlxsw: core: Make counter index allocated inside the action append") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-