1. 29 Apr, 2013 40 commits
    • Yijing Wang's avatar
      mm: remove CONFIG_HOTPLUG ifdefs · f1cb0879
      Yijing Wang authored
      CONFIG_HOTPLUG is going away as an option, cleanup CONFIG_HOTPLUG
      ifdefs in mm files.
      Signed-off-by: default avatarYijing Wang <wangyijing@huawei.com>
      Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f1cb0879
    • Michel Lespinasse's avatar
      mm/memcontrol.c: remove unnecessary ; · 573b400d
      Michel Lespinasse authored
      Just a trivial issue I stumbled on while doing something else...
      Signed-off-by: default avatarMichel Lespinasse <walken@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      573b400d
    • Andrew Shewmaker's avatar
      mm: reinititalise user and admin reserves if memory is added or removed · 1640879a
      Andrew Shewmaker authored
      Alter the admin and user reserves of the previous patches in this series
      when memory is added or removed.
      
      If memory is added and the reserves have been eliminated or increased
      above the default max, then we'll trust the admin.
      
      If memory is removed and there isn't enough free memory, then we need to
      reset the reserves.
      
      Otherwise keep the reserve set by the admin.
      
      The reserve reset code is the same as the reserve initialization code.
      
      I tested hot addition and removal by triggering it via sysfs.  The
      reserves shrunk when they were set high and memory was removed.  They
      were reset higher when memory was added again.
      
      [akpm@linux-foundation.org: use register_hotmemory_notifier()]
      [akpm@linux-foundation.org: init_user_reserve() and init_admin_reserve can no longer be __meminit]
      [fengguang.wu@intel.com: make init_reserve_notifier() static]
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: default avatarAndrew Shewmaker <agshew@gmail.com>
      Signed-off-by: default avatarFengguang Wu <fengguang.wu@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1640879a
    • Andrew Shewmaker's avatar
      mm: replace hardcoded 3% with admin_reserve_pages knob · 4eeab4f5
      Andrew Shewmaker authored
      Add an admin_reserve_kbytes knob to allow admins to change the hardcoded
      memory reserve to something other than 3%, which may be multiple
      gigabytes on large memory systems.  Only about 8MB is necessary to
      enable recovery in the default mode, and only a few hundred MB are
      required even when overcommit is disabled.
      
      This affects OVERCOMMIT_GUESS and OVERCOMMIT_NEVER.
      
      admin_reserve_kbytes is initialized to min(3% free pages, 8MB)
      
      I arrived at 8MB by summing the RSS of sshd or login, bash, and top.
      
      Please see first patch in this series for full background, motivation,
      testing, and full changelog.
      
      [akpm@linux-foundation.org: coding-style fixes]
      [akpm@linux-foundation.org: make init_admin_reserve() static]
      Signed-off-by: default avatarAndrew Shewmaker <agshew@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4eeab4f5
    • Andrew Shewmaker's avatar
      mm: limit growth of 3% hardcoded other user reserve · c9b1d098
      Andrew Shewmaker authored
      Add user_reserve_kbytes knob.
      
      Limit the growth of the memory reserved for other user processes to
      min(3% current process size, user_reserve_pages).  Only about 8MB is
      necessary to enable recovery in the default mode, and only a few hundred
      MB are required even when overcommit is disabled.
      
      user_reserve_pages defaults to min(3% free pages, 128MB)
      
      I arrived at 128MB by taking the max VSZ of sshd, login, bash, and top ...
      then adding the RSS of each.
      
      This only affects OVERCOMMIT_NEVER mode.
      
      Background
      
      1. user reserve
      
      __vm_enough_memory reserves a hardcoded 3% of the current process size for
      other applications when overcommit is disabled.  This was done so that a
      user could recover if they launched a memory hogging process.  Without the
      reserve, a user would easily run into a message such as:
      
      bash: fork: Cannot allocate memory
      
      2. admin reserve
      
      Additionally, a hardcoded 3% of free memory is reserved for root in both
      overcommit 'guess' and 'never' modes.  This was intended to prevent a
      scenario where root-cant-log-in and perform recovery operations.
      
      Note that this reserve shrinks, and doesn't guarantee a useful reserve.
      
      Motivation
      
      The two hardcoded memory reserves should be updated to account for current
      memory sizes.
      
      Also, the admin reserve would be more useful if it didn't shrink too much.
      
      When the current code was originally written, 1GB was considered
      "enterprise".  Now the 3% reserve can grow to multiple GB on large memory
      systems, and it only needs to be a few hundred MB at most to enable a user
      or admin to recover a system with an unwanted memory hogging process.
      
      I've found that reducing these reserves is especially beneficial for a
      specific type of application load:
      
       * single application system
       * one or few processes (e.g. one per core)
       * allocating all available memory
       * not initializing every page immediately
       * long running
      
      I've run scientific clusters with this sort of load.  A long running job
      sometimes failed many hours (weeks of CPU time) into a calculation.  They
      weren't initializing all of their memory immediately, and they weren't
      using calloc, so I put systems into overcommit 'never' mode.  These
      clusters run diskless and have no swap.
      
      However, with the current reserves, a user wishing to allocate as much
      memory as possible to one process may be prevented from using, for
      example, almost 2GB out of 32GB.
      
      The effect is less, but still significant when a user starts a job with
      one process per core.  I have repeatedly seen a set of processes
      requesting the same amount of memory fail because one of them could not
      allocate the amount of memory a user would expect to be able to allocate.
      For example, Message Passing Interfce (MPI) processes, one per core.  And
      it is similar for other parallel programming frameworks.
      
      Changing this reserve code will make the overcommit never mode more useful
      by allowing applications to allocate nearly all of the available memory.
      
      Also, the new admin_reserve_kbytes will be safer than the current behavior
      since the hardcoded 3% of available memory reserve can shrink to something
      useless in the case where applications have grabbed all available memory.
      
      Risks
      
      * "bash: fork: Cannot allocate memory"
      
        The downside of the first patch-- which creates a tunable user reserve
        that is only used in overcommit 'never' mode--is that an admin can set
        it so low that a user may not be able to kill their process, even if
        they already have a shell prompt.
      
        Of course, a user can get in the same predicament with the current 3%
        reserve--they just have to launch processes until 3% becomes negligible.
      
      * root-cant-log-in problem
      
        The second patch, adding the tunable rootuser_reserve_pages, allows
        the admin to shoot themselves in the foot by setting it too small.  They
        can easily get the system into a state where root-can't-log-in.
      
        However, the new admin_reserve_kbytes will be safer than the current
        behavior since the hardcoded 3% of available memory reserve can shrink
        to something useless in the case where applications have grabbed all
        available memory.
      
      Alternatives
      
       * Memory cgroups provide a more flexible way to limit application memory.
      
         Not everyone wants to set up cgroups or deal with their overhead.
      
       * We could create a fourth overcommit mode which provides smaller reserves.
      
         The size of useful reserves may be drastically different depending
         on the whether the system is embedded or enterprise.
      
       * Force users to initialize all of their memory or use calloc.
      
         Some users don't want/expect the system to overcommit when they malloc.
         Overcommit 'never' mode is for this scenario, and it should work well.
      
      The new user and admin reserve tunables are simple to use, with low
      overhead compared to cgroups.  The patches preserve current behavior where
      3% of memory is less than 128MB, except that the admin reserve doesn't
      shrink to an unusable size under pressure.  The code allows admins to tune
      for embedded and enterprise usage.
      
      FAQ
      
       * How is the root-cant-login problem addressed?
         What happens if admin_reserve_pages is set to 0?
      
         Root is free to shoot themselves in the foot by setting
         admin_reserve_kbytes too low.
      
         On x86_64, the minimum useful reserve is:
           8MB for overcommit 'guess'
         128MB for overcommit 'never'
      
         admin_reserve_pages defaults to min(3% free memory, 8MB)
      
         So, anyone switching to 'never' mode needs to adjust
         admin_reserve_pages.
      
       * How do you calculate a minimum useful reserve?
      
         A user or the admin needs enough memory to login and perform
         recovery operations, which includes, at a minimum:
      
         sshd or login + bash (or some other shell) + top (or ps, kill, etc.)
      
         For overcommit 'guess', we can sum resident set sizes (RSS)
         because we only need enough memory to handle what the recovery
         programs will typically use. On x86_64 this is about 8MB.
      
         For overcommit 'never', we can take the max of their virtual sizes (VSZ)
         and add the sum of their RSS. We use VSZ instead of RSS because mode
         forces us to ensure we can fulfill all of the requested memory allocations--
         even if the programs only use a fraction of what they ask for.
         On x86_64 this is about 128MB.
      
         When swap is enabled, reserves are useful even when they are as
         small as 10MB, regardless of overcommit mode.
      
         When both swap and overcommit are disabled, then the admin should
         tune the reserves higher to be absolutley safe. Over 230MB each
         was safest in my testing.
      
       * What happens if user_reserve_pages is set to 0?
      
         Note, this only affects overcomitt 'never' mode.
      
         Then a user will be able to allocate all available memory minus
         admin_reserve_kbytes.
      
         However, they will easily see a message such as:
      
         "bash: fork: Cannot allocate memory"
      
         And they won't be able to recover/kill their application.
         The admin should be able to recover the system if
         admin_reserve_kbytes is set appropriately.
      
       * What's the difference between overcommit 'guess' and 'never'?
      
         "Guess" allows an allocation if there are enough free + reclaimable
         pages. It has a hardcoded 3% of free pages reserved for root.
      
         "Never" allows an allocation if there is enough swap + a configurable
         percentage (default is 50) of physical RAM. It has a hardcoded 3% of
         free pages reserved for root, like "Guess" mode. It also has a
         hardcoded 3% of the current process size reserved for additional
         applications.
      
       * Why is overcommit 'guess' not suitable even when an app eventually
         writes to every page? It takes free pages, file pages, available
         swap pages, reclaimable slab pages into consideration. In other words,
         these are all pages available, then why isn't overcommit suitable?
      
         Because it only looks at the present state of the system. It
         does not take into account the memory that other applications have
         malloced, but haven't initialized yet. It overcommits the system.
      
      Test Summary
      
      There was little change in behavior in the default overcommit 'guess'
      mode with swap enabled before and after the patch. This was expected.
      
      Systems run most predictably (i.e. no oom kills) in overcommit 'never'
      mode with swap enabled. This also allowed the most memory to be allocated
      to a user application.
      
      Overcommit 'guess' mode without swap is a bad idea. It is easy to
      crash the system. None of the other tested combinations crashed.
      This matches my experience on the Roadrunner supercomputer.
      
      Without the tunable user reserve, a system in overcommit 'never' mode
      and without swap does not allow the admin to recover, although the
      admin can.
      
      With the new tunable reserves, a system in overcommit 'never' mode
      and without swap can be configured to:
      
      1. maximize user-allocatable memory, running close to the edge of
      recoverability
      
      2. maximize recoverability, sacrificing allocatable memory to
      ensure that a user cannot take down a system
      
      Test Description
      
      Fedora 18 VM - 4 x86_64 cores, 5725MB RAM, 4GB Swap
      
      System is booted into multiuser console mode, with unnecessary services
      turned off. Caches were dropped before each test.
      
      Hogs are user memtester processes that attempt to allocate all free memory
      as reported by /proc/meminfo
      
      In overcommit 'never' mode, memory_ratio=100
      
      Test Results
      
      3.9.0-rc1-mm1
      
      Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
      ----------   ----   ----   -------------   ----   -------------   --------------
      guess        yes    1      5432/5432       no     yes             yes
      guess        yes    4      5444/5444       1      yes             yes
      guess        no     1      5302/5449       no     yes             yes
      guess        no     4      -               crash  no              no
      
      never        yes    1      5460/5460       1      yes             yes
      never        yes    4      5460/5460       1      yes             yes
      never        no     1      5218/5432       no     no              yes
      never        no     4      5203/5448       no     no              yes
      
      3.9.0-rc1-mm1-tunablereserves
      
      User and Admin Recovery show their respective reserves, if applicable.
      
      Overcommit | Swap | Hogs | MB Got/Wanted | OOMs | User Recovery | Admin Recovery
      ----------   ----   ----   -------------   ----   -------------   --------------
      guess        yes    1      5419/5419       no     - yes           8MB yes
      guess        yes    4      5436/5436       1      - yes           8MB yes
      guess        no     1      5440/5440       *      - yes           8MB yes
      guess        no     4      -               crash  - no            8MB no
      
      * process would successfully mlock, then the oom killer would pick it
      
      never        yes    1      5446/5446       no     10MB yes        20MB yes
      never        yes    4      5456/5456       no     10MB yes        20MB yes
      never        no     1      5387/5429       no     128MB no        8MB barely
      never        no     1      5323/5428       no     226MB barely    8MB barely
      never        no     1      5323/5428       no     226MB barely    8MB barely
      
      never        no     1      5359/5448       no     10MB no         10MB barely
      
      never        no     1      5323/5428       no     0MB no          10MB barely
      never        no     1      5332/5428       no     0MB no          50MB yes
      never        no     1      5293/5429       no     0MB no          90MB yes
      
      never        no     1      5001/5427       no     230MB yes       338MB yes
      never        no     4*     4998/5424       no     230MB yes       338MB yes
      
      * more memtesters were launched, able to allocate approximately another 100MB
      
      Future Work
      
       - Test larger memory systems.
      
       - Test an embedded image.
      
       - Test other architectures.
      
       - Time malloc microbenchmarks.
      
       - Would it be useful to be able to set overcommit policy for
         each memory cgroup?
      
       - Some lines are slightly above 80 chars.
         Perhaps define a macro to convert between pages and kb?
         Other places in the kernel do this.
      
      [akpm@linux-foundation.org: coding-style fixes]
      [akpm@linux-foundation.org: make init_user_reserve() static]
      Signed-off-by: default avatarAndrew Shewmaker <agshew@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c9b1d098
    • Andrew Morton's avatar
      kernel/cpuset.c: use register_hotmemory_notifier() · d8f10cb3
      Andrew Morton authored
      Use the new interface, remove one ifdef.  No code size changes.
      
      We could/should have been using __meminit/__meminitdata here but there's
      now no point in doing that because all this code is elided at compile time.
      
      Cc: Li Zefan <lizefan@huawei.com>
      Cc: Tejun Heo <tj@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d8f10cb3
    • Andrew Morton's avatar
      fs/proc/kcore.c: use register_hotmemory_notifier() · 3c743a7f
      Andrew Morton authored
      Saves an ifdef, no code size changes
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3c743a7f
    • Andrew Morton's avatar
      drivers/base/node.c: switch to register_hotmemory_notifier() · 6e259e7d
      Andrew Morton authored
      Squishes a warning which my change to hotplug_memory_notifier() added.
      
      I want to keep that warning, because it is punishment for failnig to check
      the hotplug_memory_notifier() return value.
      
      Cc: Greg KH <greg@kroah.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6e259e7d
    • Andrew Morton's avatar
      mm/slub.c: use register_hotmemory_notifier() · 3ac38faa
      Andrew Morton authored
      Squishes a statement-with-no-effect warning, removes some ifdefs and
      shrinks .text by 2 bytes.
      
      Note that this code fails to check for blocking_notifier_chain_register()
      failures.
      
      Cc: Pekka Enberg <penberg@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3ac38faa
    • Andrew Morton's avatar
      ipc/util.c: use register_hotmemory_notifier() · 8f68fa2d
      Andrew Morton authored
      Squishes a statement-with-no-effect warning, removes some ifdefs and
      shrinks .text by one byte!
      
      Note that this code fails to check for blocking_notifier_chain_register()
      failures.
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8f68fa2d
    • Andrew Morton's avatar
      include/linux/memory.h: implement register_hotmemory_notifier() · f02c6968
      Andrew Morton authored
      When CONFIG_MEMORY_HOTPLUG=n, we don't want the memory-hotplug notifier
      handlers to be included in the .o files, for space reasons.
      
      The existing hotplug_memory_notifier() tries to handle this but testing
      with gcc-4.4.4 shows that it doesn't work - the hotplug functions are
      still present in the .o files.
      
      So implement a new register_hotmemory_notifier() which is a copy of
      register_hotcpu_notifier(), and which actually works as desired.
      hotplug_memory_notifier() and register_memory_notifier() callsites
      should be converted to use this new register_hotmemory_notifier().
      
      While we're there, let's repair the existing hotplug_memory_notifier():
      it simply stomps on the register_memory_notifier() return value, so
      well-behaved code cannot check for errors.  Apparently non of the
      existing callers were well-behaved :(
      
      Cc: Andrew Shewmaker <agshew@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f02c6968
    • Cody P Schafer's avatar
      powerpc/mm/numa: use setup_nr_node_ids() instead of opencoding. · f9d531b8
      Cody P Schafer authored
      [sfr@canb.auug.org.au: add missing semicolon]
      Signed-off-by: default avatarCody P Schafer <cody@linux.vnet.ibm.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f9d531b8
    • Cody P Schafer's avatar
      x86/mm/numa: use setup_nr_node_ids() instead of opencoding. · d2ad351e
      Cody P Schafer authored
      Signed-off-by: default avatarCody P Schafer <cody@linux.vnet.ibm.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Acked-by: default avatarYinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d2ad351e
    • Cody P Schafer's avatar
      page_alloc: make setup_nr_node_ids() usable for arch init code · f9872caf
      Cody P Schafer authored
      powerpc and x86 were opencoding copies of setup_nr_node_ids(), which
      page_alloc provides but makes static.  Make it avaliable to the archs in
      linux/mm.h.
      Signed-off-by: default avatarCody P Schafer <cody@linux.vnet.ibm.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f9872caf
    • Russ Anderson's avatar
      mm: speedup in __early_pfn_to_nid · 7c243c71
      Russ Anderson authored
      When booting on a large memory system, the kernel spends considerable
      time in memmap_init_zone() setting up memory zones.  Analysis shows
      significant time spent in __early_pfn_to_nid().
      
      The routine memmap_init_zone() checks each PFN to verify the nid is
      valid.  __early_pfn_to_nid() sequentially scans the list of pfn ranges
      to find the right range and returns the nid.  This does not scale well.
      On a 4 TB (single rack) system there are 308 memory ranges to scan.  The
      higher the PFN the more time spent sequentially spinning through memory
      ranges.
      
      Since memmap_init_zone() increments pfn, it will almost always be
      looking for the same range as the previous pfn, so check that range
      first.  If it is in the same range, return that nid.  If not, scan the
      list as before.
      
      A 4 TB (single rack) UV1 system takes 512 seconds to get through the
      zone code.  This performance optimization reduces the time by 189
      seconds, a 36% improvement.
      
      A 2 TB (single rack) UV2 system goes from 212.7 seconds to 99.8 seconds,
      a 112.9 second (53%) reduction.
      
      [akpm@linux-foundation.org: make the statics __meminitdata]
      [akpm@linux-foundation.org: fix comment formatting]
      [akpm@linux-foundation.org: fix ia64, per yinghai]
      [akpm@linux-foundation.org: add missing semicolon, per Tony]
      Signed-off-by: default avatarRuss Anderson <rja@sgi.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Tested-by: default avatar"Luck, Tony" <tony.luck@intel.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Lin Feng <linfeng@cn.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7c243c71
    • Jianguo Wu's avatar
    • Mel Gorman's avatar
      mm: page_alloc: avoid marking zones full prematurely after zone_reclaim() · fed2719e
      Mel Gorman authored
      The following problem was reported against a distribution kernel when
      zone_reclaim was enabled but the same problem applies to the mainline
      kernel.  The reproduction case was as follows
      
      1. Run numactl -m +0 dd if=largefile of=/dev/null
         This allocates a large number of clean pages in node 0
      
      2. numactl -N +0 memhog 0.5*Mg
         This start a memory-using application in node 0.
      
      The expected behaviour is that the clean pages get reclaimed and the
      application uses node 0 for its memory.  The observed behaviour was that
      the memory for the memhog application was allocated off-node since
      commits cd38b115 ("mm: page allocator: initialise ZLC for first zone
      eligible for zone_reclaim") and commit 76d3fbf8 ("mm: page
      allocator: reconsider zones for allocation after direct reclaim").
      
      The assumption of those patches was that it was always preferable to
      allocate quickly than stall for long periods of time and they were meant
      to take care that the zone was only marked full when necessary but an
      important case was missed.
      
      In the allocator fast path, only the low watermarks are checked.  If the
      zones free pages are between the low and min watermark then allocations
      from the allocators slow path will succeed.  However, zone_reclaim will
      only reclaim SWAP_CLUSTER_MAX or 1<<order pages.  There is no guarantee
      that this will meet the low watermark causing the zone to be marked full
      prematurely.
      
      This patch will only mark the zone full after zone_reclaim if it the min
      watermarks are checked or if page reclaim failed to make sufficient
      progress.
      
      [mhocko@suse.cz: fix alloc_flags test]
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Reported-by: default avatarHedi Berriche <hedi@sgi.com>
      Tested-by: default avatarHedi Berriche <hedi@sgi.com>
      Reviewed-by: default avatarMichal Hocko <mhocko@suse.cz>
      Reviewed-by: default avatarWanpeng Li <liwanp@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichal Hocko <mhocko@suse.cz>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fed2719e
    • Johannes Weiner's avatar
      x86-64: fall back to regular page vmemmap on allocation failure · 8e2cdbcb
      Johannes Weiner authored
      Memory hotplug can happen on a machine under load, memory shortness
      and fragmentation, so huge page allocations for the vmemmap are not
      guaranteed to succeed.
      
      Try to fall back to regular pages before failing the hotplug event
      completely.
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: David Miller <davem@davemloft.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8e2cdbcb
    • Johannes Weiner's avatar
      x86-64: use vmemmap_populate_basepages() for !pse setups · e8216da5
      Johannes Weiner authored
      We already have generic code to allocate vmemmap with regular pages, use
      it.
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: David Miller <davem@davemloft.net>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e8216da5
    • Johannes Weiner's avatar
      x86-64: remove dead debugging code for !pse setups · 6c7a2ca4
      Johannes Weiner authored
      No need to maintain addr_end and p_end when they are never actually read
      anywhere on !pse setups.  Remove the dead code.
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: David Miller <davem@davemloft.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6c7a2ca4
    • Johannes Weiner's avatar
      sparse-vmemmap: specify vmemmap population range in bytes · 0aad818b
      Johannes Weiner authored
      The sparse code, when asking the architecture to populate the vmemmap,
      specifies the section range as a starting page and a number of pages.
      
      This is an awkward interface, because none of the arch-specific code
      actually thinks of the range in terms of 'struct page' units and always
      translates it to bytes first.
      
      In addition, later patches mix huge page and regular page backing for
      the vmemmap.  For this, they need to call vmemmap_populate_basepages()
      on sub-section ranges with PAGE_SIZE and PMD_SIZE in mind.  But these
      are not necessarily multiples of the 'struct page' size and so this unit
      is too coarse.
      
      Just translate the section range into bytes once in the generic sparse
      code, then pass byte ranges down the stack.
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: Bernhard Schmidt <Bernhard.Schmidt@lrz.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
      Tested-by: default avatarDavid S. Miller <davem@davemloft.net>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0aad818b
    • Ben Hutchings's avatar
      mm: try harder to allocate vmemmap blocks · 055e4fd9
      Ben Hutchings authored
      Hot-adding memory on x86_64 normally requires huge page allocation.
      When this is done to a VM guest, it's usually because the system is
      already tight on memory, so the request tends to fail.  Try to avoid
      this by adding __GFP_REPEAT to the allocation flags.
      
      Addresses http://bugs.debian.org/699913Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Reported-by: default avatarBernhard Schmidt <Bernhard.Schmidt@lrz.de>
      Tested-by: default avatarBernhard Schmidt <Bernhard.Schmidt@lrz.de>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: David Miller <davem@davemloft.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      055e4fd9
    • David Rientjes's avatar
      mm, hugetlb: include hugepages in meminfo · 949f7ec5
      David Rientjes authored
      Particularly in oom conditions, it's troublesome that hugetlb memory is
      not displayed.  All other meminfo that is emitted will not add up to
      what is expected, and there is no artifact left in the kernel log to
      show that a potentially significant amount of memory is actually
      allocated as hugepages which are not available to be reclaimed.
      
      Booting with hugepages=8192 on the command line, this memory is now
      shown in oom conditions.  For example, with echo m >
      /proc/sysrq-trigger:
      
        Node 0 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB
        Node 1 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB
        Node 2 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB
        Node 3 hugepages_total=2048 hugepages_free=2048 hugepages_surp=0 hugepages_size=2048kB
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      949f7ec5
    • Hampson, Steven T's avatar
      mm: merging memory blocks resets mempolicy · 1444f92c
      Hampson, Steven T authored
      Using mbind to change the mempolicy to MPOL_BIND on several adjacent
      mmapped blocks may result in a reset of the mempolicy to MPOL_DEFAULT in
      vma_adjust.
      
      Test code.  Correct result is three lines containing "OK".
      
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/mman.h>
      #include <numaif.h>
      #include <errno.h>
      
      /* gcc mbind_test.c -lnuma -o mbind_test -Wall */
      #define MAXNODE 4096
      
      void allocate()
      {
      	int ret;
      	int len;
      	int policy = -1;
      	unsigned char *p;
      	unsigned long mask[MAXNODE] = { 0 };
      	unsigned long retmask[MAXNODE] = { 0 };
      
      	len = getpagesize() * 0x2fc00;
      	p = mmap(NULL, len, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
      		 -1, 0);
      	if (p == MAP_FAILED)
      		printf("mbind err: %d\n", errno);
      
      	mask[0] = 1;
      	ret = mbind(p, len, MPOL_BIND, mask, MAXNODE, 0);
      	if (ret < 0)
      		printf("mbind err: %d %d\n", ret, errno);
      	ret = get_mempolicy(&policy, retmask, MAXNODE, p, MPOL_F_ADDR);
      	if (ret < 0)
      		printf("get_mempolicy err: %d %d\n", ret, errno);
      
      	if (policy == MPOL_BIND)
      		printf("OK\n");
      	else
      		printf("ERROR: policy is %d\n", policy);
      }
      
      int main()
      {
      	allocate();
      	allocate();
      	allocate();
      	return 0;
      }
      Signed-off-by: default avatarSteven T Hampson <steven.t.hampson@intel.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1444f92c
    • Catalin Marinas's avatar
      arm: set the page table freeing ceiling to TASK_SIZE · 104ad3b3
      Catalin Marinas authored
      ARM processors with LPAE enabled use 3 levels of page tables, with an
      entry in the top level (pgd) covering 1GB of virtual space.  Because of
      the branch relocation limitations on ARM, the loadable modules are
      mapped 16MB below PAGE_OFFSET, making the corresponding 1GB pgd shared
      between kernel modules and user space.
      
      If free_pgtables() is called with the default ceiling 0,
      free_pgd_range() (and subsequently called functions) also frees the page
      table shared between user space and kernel modules (which is normally
      handled by the ARM-specific pgd_free() function).  This patch changes
      defines the ARM USER_PGTABLES_CEILING to TASK_SIZE when CONFIG_ARM_LPAE
      is enabled.
      
      Note that the pgd_free() function already checks the presence of the
      shared pmd page allocated by pgd_alloc() and frees it, though with
      ceiling 0 this wasn't necessary.
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: <stable@vger.kernel.org>	[3.3+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      104ad3b3
    • Hugh Dickins's avatar
      mm: allow arch code to control the user page table ceiling · 6ee8630e
      Hugh Dickins authored
      On architectures where a pgd entry may be shared between user and kernel
      (e.g.  ARM+LPAE), freeing page tables needs a ceiling other than 0.
      This patch introduces a generic USER_PGTABLES_CEILING that arch code can
      override.  It is the responsibility of the arch code setting the ceiling
      to ensure the complete freeing of the page tables (usually in
      pgd_free()).
      
      [catalin.marinas@arm.com: commit log; shift_arg_pages(), asm-generic/pgtables.h changes]
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      Cc: Russell King <linux@arm.linux.org.uk>
      Cc: <stable@vger.kernel.org>	[3.3+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6ee8630e
    • Michal Hocko's avatar
      memcg: do not check for do_swap_account in mem_cgroup_{read,write,reset} · acb6d558
      Michal Hocko authored
      Since commit 2d11085e ("memcg: do not create memsw files if swap
      accounting is disabled") memsw files are created only if memcg swap
      accounting is enabled so it doesn't make any sense to check for it
      explicitly in mem_cgroup_read(), mem_cgroup_write() and
      mem_cgroup_reset().
      Signed-off-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Tejun Heo <tj@kernel.org>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      acb6d558
    • Zhang Yanfei's avatar
      mmap: find_vma: remove the WARN_ON_ONCE(!mm) check · ee5df057
      Zhang Yanfei authored
      Remove the WARN_ON_ONCE(!mm) check as the comment suggested.  Kernel
      code calls find_vma only when it is absolutely sure that the mm_struct
      arg to it is non-NULL.
      Signed-off-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: k80c <k80ck80c@gmail.com>
      Cc: Michel Lespinasse <walken@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ee5df057
    • Atsushi Kumagai's avatar
      kexec, vmalloc: export additional vmalloc layer information · 13ba3fcb
      Atsushi Kumagai authored
      Now, vmap_area_list is exported as VMCOREINFO for makedumpfile to get
      the start address of vmalloc region (vmalloc_start).  The address which
      contains vmalloc_start value is represented as below:
      
        vmap_area_list.next - OFFSET(vmap_area.list) + OFFSET(vmap_area.va_start)
      
      However, both OFFSET(vmap_area.va_start) and OFFSET(vmap_area.list)
      aren't exported as VMCOREINFO.
      
      So this patch exports them externally with small cleanup.
      
      [akpm@linux-foundation.org: vmalloc.h should include list.h for list_head]
      Signed-off-by: default avatarAtsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Joonsoo Kim <js1304@gmail.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      13ba3fcb
    • Joonsoo Kim's avatar
      mm, vmalloc: remove list management of vmlist after initializing vmalloc · 4341fa45
      Joonsoo Kim authored
      Now, there is no need to maintain vmlist after initializing vmalloc.  So
      remove related code and data structure.
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4341fa45
    • Joonsoo Kim's avatar
      mm, vmalloc: export vmap_area_list, instead of vmlist · f1c4069e
      Joonsoo Kim authored
      Although our intention is to unexport internal structure entirely, but
      there is one exception for kexec.  kexec dumps address of vmlist and
      makedumpfile uses this information.
      
      We are about to remove vmlist, then another way to retrieve information
      of vmalloc layer is needed for makedumpfile.  For this purpose, we
      export vmap_area_list, instead of vmlist.
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f1c4069e
    • Joonsoo Kim's avatar
      mm, vmalloc: iterate vmap_area_list, instead of vmlist, in vmallocinfo() · d4033afd
      Joonsoo Kim authored
      This patch is a preparatory step for removing vmlist entirely.  For
      above purpose, we change iterating a vmap_list codes to iterating a
      vmap_area_list.  It is somewhat trivial change, but just one thing
      should be noticed.
      
      Using vmap_area_list in vmallocinfo() introduce ordering problem in SMP
      system.  In s_show(), we retrieve some values from vm_struct.
      vm_struct's values is not fully setup when va->vm is assigned.  Full
      setup is notified by removing VM_UNLIST flag without holding a lock.
      When we see that VM_UNLIST is removed, it is not ensured that vm_struct
      has proper values in view of other CPUs.  So we need smp_[rw]mb for
      ensuring that proper values is assigned when we see that VM_UNLIST is
      removed.
      
      Therefore, this patch not only change a iteration list, but also add a
      appropriate smp_[rw]mb to right places.
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d4033afd
    • Joonsoo Kim's avatar
      mm, vmalloc: iterate vmap_area_list in get_vmalloc_info() · f98782dd
      Joonsoo Kim authored
      This patch is a preparatory step for removing vmlist entirely.  For
      above purpose, we change iterating a vmap_list codes to iterating a
      vmap_area_list.  It is somewhat trivial change, but just one thing
      should be noticed.
      
      vmlist is lack of information about some areas in vmalloc address space.
      For example, vm_map_ram() allocate area in vmalloc address space, but it
      doesn't make a link with vmlist.  To provide full information about
      vmalloc address space is better idea, so we don't use va->vm and use
      vmap_area directly.  This makes get_vmalloc_info() more precise.
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f98782dd
    • Joonsoo Kim's avatar
      mm, vmalloc: iterate vmap_area_list, instead of vmlist in vread/vwrite() · e81ce85f
      Joonsoo Kim authored
      Now, when we hold a vmap_area_lock, va->vm can't be discarded.  So we can
      safely access to va->vm when iterating a vmap_area_list with holding a
      vmap_area_lock.  With this property, change iterating vmlist codes in
      vread/vwrite() to iterating vmap_area_list.
      
      There is a little difference relate to lock, because vmlist_lock is mutex,
      but, vmap_area_lock is spin_lock.  It may introduce a spinning overhead
      during vread/vwrite() is executing.  But, these are debug-oriented
      functions, so this overhead is not real problem for common case.
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e81ce85f
    • Joonsoo Kim's avatar
      mm, vmalloc: protect va->vm by vmap_area_lock · c69480ad
      Joonsoo Kim authored
      Inserting and removing an entry to vmlist is linear time complexity, so
      it is inefficient.  Following patches will try to remove vmlist
      entirely.  This patch is preparing step for it.
      
      For removing vmlist, iterating vmlist codes should be changed to
      iterating a vmap_area_list.  Before implementing that, we should make
      sure that when we iterate a vmap_area_list, accessing to va->vm doesn't
      cause a race condition.  This patch ensure that when iterating a
      vmap_area_list, there is no race condition for accessing to vm_struct.
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c69480ad
    • Joonsoo Kim's avatar
      mm, vmalloc: move get_vmalloc_info() to vmalloc.c · db3808c1
      Joonsoo Kim authored
      Now get_vmalloc_info() is in fs/proc/mmu.c.  There is no reason that this
      code must be here and it's implementation needs vmlist_lock and it iterate
      a vmlist which may be internal data structure for vmalloc.
      
      It is preferable that vmlist_lock and vmlist is only used in vmalloc.c
      for maintainability. So move the code to vmalloc.c
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      db3808c1
    • Joonsoo Kim's avatar
      mm, vmalloc: change iterating a vmlist to find_vm_area() · ef932473
      Joonsoo Kim authored
      This patchset removes vm_struct list management after initializing
      vmalloc.  Adding and removing an entry to vmlist is linear time
      complexity, so it is inefficient.  If we maintain this list, overall
      time complexity of adding and removing area to vmalloc space is O(N),
      although we use rbtree for finding vacant place and it's time complexity
      is just O(logN).
      
      And vmlist and vmlist_lock is used many places of outside of vmalloc.c.
      It is preferable that we hide this raw data structure and provide
      well-defined function for supporting them, because it makes that they
      cannot mistake when manipulating theses structure and it makes us easily
      maintain vmalloc layer.
      
      For kexec and makedumpfile, I export vmap_area_list, instead of vmlist.
      This comes from Atsushi's recommendation.  For more information, please
      refer below link.  https://lkml.org/lkml/2012/12/6/184
      
      This patch:
      
      The purpose of iterating a vmlist is finding vm area with specific virtual
      address.  find_vm_area() is provided for this purpose and more efficient,
      because it uses a rbtree.  So change it.
      Signed-off-by: default avatarJoonsoo Kim <js1304@gmail.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarGuan Xuetao <gxt@mprc.pku.edu.cn>
      Acked-by: default avatarIngo Molnar <mingo@kernel.org>
      Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
      Cc: Dave Anderson <anderson@redhat.com>
      Cc: Eric Biederman <ebiederm@xmission.com>
      Cc: Vivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ef932473
    • Darrick J. Wong's avatar
      mm: make snapshotting pages for stable writes a per-bio operation · 71368511
      Darrick J. Wong authored
      Walking a bio's page mappings has proved problematic, so create a new
      bio flag to indicate that a bio's data needs to be snapshotted in order
      to guarantee stable pages during writeback.  Next, for the one user
      (ext3/jbd) of snapshotting, hook all the places where writes can be
      initiated without PG_writeback set, and set BIO_SNAP_STABLE there.
      
      We must also flag journal "metadata" bios for stable writeout, since
      file data can be written through the journal.  Finally, the
      MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get
      rid of it.
      
      [akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration]
      [akpm@linux-foundation.org: teeny cleanup]
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Artem Bityutskiy <dedekind1@gmail.com>
      Reviewed-by: default avatarJan Kara <jack@suse.cz>
      Cc: Jens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      71368511
    • Gerald Schaefer's avatar
      mm/hugetlb: add more arch-defined huge_pte functions · 106c992a
      Gerald Schaefer authored
      Commit abf09bed ("s390/mm: implement software dirty bits")
      introduced another difference in the pte layout vs.  the pmd layout on
      s390, thoroughly breaking the s390 support for hugetlbfs.  This requires
      replacing some more pte_xxx functions in mm/hugetlbfs.c with a
      huge_pte_xxx version.
      
      This patch introduces those huge_pte_xxx functions and their generic
      implementation in asm-generic/hugetlb.h, which will now be included on
      all architectures supporting hugetlbfs apart from s390.  This change
      will be a no-op for those architectures.
      
      [akpm@linux-foundation.org: fix warning]
      Signed-off-by: default avatarGerald Schaefer <gerald.schaefer@de.ibm.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Hillf Danton <dhillf@gmail.com>
      Acked-by: Michal Hocko <mhocko@suse.cz>	[for !s390 parts]
      Cc: Tony Luck <tony.luck@intel.com>
      Cc: Fenghua Yu <fenghua.yu@intel.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Chris Metcalf <cmetcalf@tilera.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      106c992a
    • Josh Triplett's avatar
      fs: don't compile in drop_caches.c when CONFIG_SYSCTL=n · 146732ce
      Josh Triplett authored
      drop_caches.c provides code only invokable via sysctl, so don't compile it
      in when CONFIG_SYSCTL=n.
      Signed-off-by: default avatarJosh Triplett <josh@joshtriplett.org>
      Acked-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      146732ce