- 03 Oct, 2018 17 commits
-
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->waitfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmdfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmd_ctrl() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->block_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->select_chip() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->correct()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->calculate()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->hwctl()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_wait_ready()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. In order to do that, we first need to update the platform_nand_ctrl hooks to take a nand_chip object instead of an mtd_info. We add temporary plat_nand_xxx() wrappers to the do the mtd -> chip conversion, but those will be dropped when patching nand_chip hooks to take a nand_chip object. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
- 04 Sep, 2018 14 commits
-
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Christoph Hellwig authored
A recent commit removed the incorrect use of phys_to_dma from this driver, but failed to remove the dma-direct.h include, so do that now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Masahiro Yamada authored
Use SPDX-License-Identifier instead of the license boilerplates. This conversion makes it easier for us to scan the license, then I notice license mismatch problems. The license blocks in denali* indicate GPL-2.0 "only", while the MODULE_LICENSE in denali.c and denali_dt.c is GPL-2.0 "or later" as explained in include/linux/module.h as follows: "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] I fixed the MODULE_LICENSE tags, assuming the license blocks are the authors' intention. Also, add missing MODULE_DESCRIPTION/AUTHOR to denali.c While I am touching the license things, I added my credit to denali.c because this driver was largely re-written by me in 2017. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Kurt Kanzenbach authored
Newer versions of the IFC controller use a different method of initializing the internal SRAM: Instead of reading from flash, a bit in the NAND configuration register has to be set in order to trigger the self-initializing process. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Kurt Kanzenbach authored
The SRAM initialization might fail. If that happens further NAND operations won't be successful. Therefore, the chip init routine should fail if the SRAM initialization didn't work. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Miquel Raynal authored
It is preferred to have the documentation about the drivers directly embedded in the driver itself. Remove this file now that the most important information from this file have been re-written in marvell_nand.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Ezequiel Garcia <ezequiel@collabora.com>
-
Miquel Raynal authored
A stale document about the old pxa3cc_nand.c driver is available in Documentation/mtd/nand/. Rewrite the parts that explain the IP itself and some non-trivial choices made in the driver directly in marvell_nand.c to then be able to remove this file. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
-
KOBAYASHI Yoshitake authored
This patch is a patch to support TOSHIBA MEMORY CORPORATION BENAND memory devices. Check the status of the built-in ECC with the Read Status command without using the vendor specific command. The Read Status command only knows whether there was bitflips above the threshold and can not get accurate bitflips. For now, I set max_bitflips mtd->bitflip_threshold. Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Thomas Petazzoni authored
The marvell_nfc_init() function fiddles with some bits of a system controller on Armada 7K/8K. However, it does a read/modify/write sequence on GENCONF_CLK_GATING_CTRL and GENCONF_ND_CLK_CTRL, which isn't safe from a concurrency point of view, as the regmap lock isn't taken accross the read/modify/write sequence. To solve this issue, use regmap_update_bits(). While at it, since the "reg" variable is no longer needed for the read/modify/write sequences, get rid of it for the regmap_write() to GENCONF_SOC_DEVICE_MUX, and directly pass the value to be written as argument. Fixes: 02f26ecf ("mtd: nand: add reworked Marvell NAND controller driver") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
Commit c120e75e ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") removed this only user of the ->read_word() method but kept the hook in place. Remove it now. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
In order to make sure we use ->exec_op() to wait for chip readiness when it's available we provide an helper that does the selection between ->exec_op(), udelay(chip->chip_delay) and nand_wait_ready() based on what's implemented by the controller driver. We then use it in nand_wait_readrdy(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
Boris Brezillon authored
The logic to wait for chip readiness after a page read has been duplicated in nand_do_read_ops() and nand_do_read_oob(). Provide an helper that does the right thing and call it where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
- 02 Sep, 2018 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree updates from Rob Herring: "A couple of new helper functions in preparation for some tree wide clean-ups. I'm sending these new helpers now for rc2 in order to simplify the dependencies on subsequent cleanups across the tree in 4.20" * tag 'devicetree-fixes-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add device_type access helper functions of: add node name compare helper functions of: add helper to lookup compatible child node
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "First batch of fixes post-merge window: - A handful of devicetree changes for i.MX2{3,8} to change over to new panel bindings. The platforms were moved from legacy framebuffers to DRM and some development board panels hadn't yet been converted. - OMAP fixes related to ti-sysc driver conversion fallout, fixing some register offsets, no_console_suspend fixes, etc. - Droid4 changes to fix flaky eMMC probing and vibrator DTS mismerge. - Fixed 0755->0644 permissions on a newly added file. - Defconfig changes to make ARM Versatile more useful with QEMU (helps testing). - Enable defconfig options for new TI SoC platform that was merged this window (AM6)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: Enable TI's AM6 SoC platform ARM: defconfig: Update the ARM Versatile defconfig ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: dts: imx23-evk: Convert to the new display bindings ARM: dts: imx23-evk: Move regulators outside simple-bus ARM: dts: imx28-evk: Convert to the new display bindings ARM: dts: imx28-evk: Move regulators outside simple-bus Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Speculation: - Make the microcode check more robust - Make the L1TF memory limit depend on the internal cache physical address space and not on the CPUID advertised physical address space, which might be significantly smaller. This avoids disabling L1TF on machines which utilize the full physical address space. - Fix the GDT mapping for EFI calls on 32bit PTI - Fix the MCE nospec implementation to prevent #GP Fixes and robustness: - Use the proper operand order for LSL in the VDSO - Prevent NMI uaccess race against CR3 switching - Add a lockdep check to verify that text_mutex is held in text_poke() functions - Repair the fallout of giving native_restore_fl() a prototype - Prevent kernel memory dumps based on usermode RIP - Wipe KASAN shadow stack before rewinding the stack to prevent false positives - Move the AMS GOTO enforcement to the actual build stage to allow user API header extraction without a compiler - Fix a section mismatch introduced by the on demand VDSO mapping change Miscellaneous: - Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pti: Fix section mismatch warning/error x86/vdso: Fix lsl operand order x86/mce: Fix set_mce_nospec() to avoid #GP fault x86/efi: Load fixmap GDT in efi_call_phys_epilog() x86/nmi: Fix NMI uaccess race against CR3 switching x86: Allow generating user-space headers without a compiler x86/dumpstack: Don't dump kernel memory based on usermode RIP x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember() x86/alternatives: Lockdep-enforce text_mutex in text_poke*() x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit() x86/irqflags: Mark native_restore_fl extern inline x86/build: Remove jump label quirk for GCC older than 4.5.2 x86/Kconfig: Fix trivial typo x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+ x86/spectre: Add missing family 6 check to microcode check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CPU hotplug fix from Thomas Gleixner: "Remove the stale skip_onerr member from the hotplug states" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove skip_onerr field from cpuhp_step structure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: "A small set of updates for core code: - Prevent tracing in functions which are called from trace patching via stop_machine() to prevent executing half patched function trace entries. - Remove old GCC workarounds - Remove pointless includes of notifier.h" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Remove workaround for unreachable warnings from old GCC notifier: Remove notifier header file wherever not used watchdog: Mark watchdog touch functions as notrace
-
Randy Dunlap authored
Fix the section mismatch warning in arch/x86/mm/pti.c: WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the function pti_clone_pgtable() to the function .init.text:pti_user_pagetable_walk_pte() The function pti_clone_pgtable() references the function __init pti_user_pagetable_walk_pte(). This is often because pti_clone_pgtable lacks a __init annotation or the annotation of pti_user_pagetable_walk_pte is wrong. FATAL: modpost: Section mismatches detected. Fixes: 85900ea5 ("x86/pti: Map the vsyscall page if needed") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/43a6d6a3-d69d-5eda-da09-0b1c88215a2a@infradead.org
-
Olof Johansson authored
Merge tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap variants against v4.19-rc1 These are mostly fixes related to using ti-sysc interconnect target module driver for accessing right register offsets for sgx and cpsw and for no_console_suspend regression. There is also a droid4 emmc fix where emmc may not get detected for some models, and vibrator dts mismerge fix. And we have a file permission fix for am335x-osd3358-sm-red.dts that just got added. And we must tag RTC as system-power-controller for am437x for PMIC to shut down during poweroff. * tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 01 Sep, 2018 1 commit
-
-
Samuel Neves authored
In the __getcpu function, lsl is using the wrong target and destination registers. Luckily, the compiler tends to choose %eax for both variables, so it has been working so far. Fixes: a582c540 ("x86/vdso: Use RDPID in preference to LSL when available") Signed-off-by: Samuel Neves <sneves@dei.uc.pt> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180901201452.27828-1-sneves@dei.uc.pt
-