Unfortunately the stack protector support we merged recently only works
on some toolchains. If the toolchain is built without glibc support
everything works fine, but if glibc is built then it leads to a panic
at boot.

The solution is not rc5 material, so revert the support for now. This
reverts commits:

6533b7c1 ("powerpc: Initial stack protector (-fstack-protector) support")
902e06eb ("powerpc/32: Change the stack protector canary value per task")

Fixes: 6533b7c1 ("powerpc: Initial stack protector (-fstack-protector) support")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In __eeh_clear_pe_frozen_state(), we should pass the flag's value
instead of its address to eeh_unfreeze_pe(). The isolated flag is
cleared if no error returned from __eeh_clear_pe_frozen_state(). We
never observed the error from the function. So the isolated flag should
have been always cleared, no real issue is caused because of the misused
@flag.

This fixes the code by passing the value of @flag to eeh_unfreeze_pe().

Fixes: 5cfb20b9 ("powerpc/eeh: Emulate EEH recovery for VFIO devices")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

prom_init.c calls 'instance-to-package' twice, but the return
is not checked during prom_find_boot_cpu(). The result is then
passed to prom_getprop(), which could be PROM_ERROR. Add a return check
to prevent this.

This was found on a pasemi system, where CFE doesn't have a working
'instance-to package' prom call.

Before Commit 5c0484e2 ('powerpc: Endian safe trampoline') the area
around addr 0 was mostly 0's and this doesn't cause a problem. Once the
macro 'FIXUP_ENDIAN' has been added to head_64.S, the low memory area
now has non-zero values, which cause the prom_getprop() call
to hang.

mpe: Also confirmed that under SLOF if 'instance-to-package' did fail
with PROM_ERROR we would crash in SLOF. So the bug is not specific to
CFE, it's just that other open firmwares don't trigger it because they
have a working 'instance-to-package'.

Fixes: 5c0484e2 ("powerpc: Endian safe trampoline")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

IBM bit 31 (for the rest of us - bit 0) is a reserved field in the
instruction definition of mtspr and mfspr. Hardware is encouraged to
(and does) ignore it.

As a result, if userspace executes an mtspr DSCR with the reserved bit
set, we get a DSCR facility unavailable exception. The kernel fails to
match against the expected value/mask, and we silently return to
userspace to try and re-execute the same mtspr DSCR instruction. We
loop forever until the process is killed.

We should do something here, and it seems mirroring what hardware does
is the better option vs killing the process. While here, relax the
matching of mfspr PVR too.

Cc: stable@vger.kernel.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the check pointed registers, the thread's old check pointed
registers are preserved.

Fixes: 9d3918f7 ("powerpc/ptrace: Enable support for NT_PPC_CVSX")
Fixes: 19cbcbf7 ("powerpc/ptrace: Enable support for NT_PPC_CFPR")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.

Fixes: c6e6771b ("powerpc: Introduce VSX thread_struct and CONFIG_VSX")
Cc: stable@vger.kernel.org # v2.6.27+
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

SIER and SIAR are not updated correctly for some samples, so force the
use of MSR and regs->nip instead for misc_flag updates. This is done by
adding a new ppmu flag and updating the use_siar logic in
perf_read_regs() to use it, and dropping the PPMU_HAS_SIER flag.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Rename flag to PPMU_NO_SIAR, and also drop PPMU_HAS_SIER]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Test uses PMC2 to count the event. But PMC1 is being initialized.
Patch to fix it.

Fixes: 3752e453 ('selftests/powerpc: Add tests of PMU EBBs')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We give up recovery on permanent error, simply shutdown the affected
devices and remove them. If the devices can't be put into quiet state,
they spew more traffic that is likely to cause another unexpected EEH
error. This was observed on "p8dtu2u" machine:

   0002:00:00.0 PCI bridge: IBM Device 03dc
   0002:01:00.0 Ethernet controller: Intel Corporation \
                Ethernet Controller X710/X557-AT 10GBASE-T (rev 02)
   0002:01:00.1 Ethernet controller: Intel Corporation \
                Ethernet Controller X710/X557-AT 10GBASE-T (rev 02)
   0002:01:00.2 Ethernet controller: Intel Corporation \
                Ethernet Controller X710/X557-AT 10GBASE-T (rev 02)
   0002:01:00.3 Ethernet controller: Intel Corporation \
                Ethernet Controller X710/X557-AT 10GBASE-T (rev 02)

On P8 PowerNV platform, the IO path is frozen when shutdowning the
devices, meaning the memory registers are inaccessible. It is why
the devices can't be put into quiet state before removing them.
This fixes the issue by enabling IO path prior to putting the devices
into quiet state.
Reported-by: Pridhiviraj Paidipeddi <ppaidipe@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use 0x10012 event code for PM_BRU_CMPL event in power9 event list
instead of current 0x40060.

Fixes: 34922527 ('powerpc/perf: Add power9 event list macros for generic and cache events')
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When we switched to big endian page table, we never updated the hugepd
format such that it can work for both big endian and little endian
config. This patch series update hugepd format such that it is looked at
as __be64 value in big endian page table config.

This patch also switch hugepd_t.pd from signed long to unsigned long.
I did update the FSL hugepd_ok check to check for the top bit instead
of checking > 0.

Fixes: 5dc1ef85 ("powerpc/mm: Use big endian Linux page tables for book3s 64")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The generic hugetlbfs code can handle not finding the default huge page
size correctly. With HPAGE_SHIFT = 0 we see in dmesg:

  hugetlbfs: disabling because there are no supported hugepage sizes

bash-4.2# echo 30 > /proc/sys/vm/nr_hugepages
bash: echo: write error: Operation not supported

Fixes: 03bb2d65 ("powerpc: get hugetlbpage handling more generic")
Reported-by: Chris Smart <chris@distroguy.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 9b081e10 ("powerpc: port 64 bits pgtable_cache to 32 bits")
mixed up PMD_INDEX_SIZE and PMD_CACHE_INDEX a couple of times. This
resulted in 64s/hash/4k configs to panic at boot with a false positive
error check.

Fix that and simplify error handling by moving the check to the caller.

Fixes: 9b081e10 ("powerpc: port 64 bits pgtable_cache to 32 bits")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The icp-opal call is missing the code from icp-native to recover
interrupts snatched by KVM. Without that, when running KVM, we can
get into a situation where an interrupt is lost and the CPU stuck
with an elevated CPPR.

Also harden replay by always checking the return from opal_int_eoi().

Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Memory hotplug is leading to hash page table calls, even on radix:

  arch_add_memory
    create_section_mapping
      htab_bolt_mapping
        BUG_ON(!ppc_md.hpte_insert);

To fix, refactor {create,remove}_section_mapping() into hash__ and
radix__ variants. Leave the radix versions stubbed for now.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull namespace fixes from Eric Biederman:
 "This tree contains 4 fixes.

  The first is a fix for a race that can causes oopses under the right
  circumstances, and that someone just recently encountered.

  Past that are several small trivial correct fixes. A real issue that
  was blocking development of an out of tree driver, but does not appear
  to have caused any actual problems for in-tree code. A potential
  deadlock that was reported by lockdep. And a deadlock people have
  experienced and took the time to track down caused by a cleanup that
  removed the code to drop a reference count"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sysctl: Drop reference added by grab_header in proc_sys_readdir
  pid: fix lockdep deadlock warning due to ucount_lock
  libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount
  mnt: Protect the mountpoint hashtable with mount_lock

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 4.10-rc4 that resolve
  some reported issues.

  The MEI driver issue resolves a lot of problems that people have been
  having, as does the mem driver fix. The other minor fixes resolve
  other reported issues.

  All of these have been in linux-next for a while"

* tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  vme: Fix wrong pointer utilization in ca91cx42_slave_get
  auxdisplay: fix new ht16k33 build errors
  ppdev: don't print a free'd string
  extcon: return error code on failure
  drivers: char: mem: Fix thinkos in kmem address checks
  mei: bus: enable OS version only for SPT and newer

Merge tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single patch being reverted to remove a feature that was
  added in 4.10-rc1 that isn't quite ready for release.

  It will be redone as a debugfs file instead of a sysfs file in the
  future"

* tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Revert "driver core: Add deferred_probe attribute to devices in sysfs"

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a
  number of reported issues.

  Nothing major here at all, one revert of a problematic patch, and some
  other tiny bugfixes. Full details are in the shortlog below.

  All have been in linux-next with no reported issues"

* tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  sysrq: attach sysrq handler correctly for 32-bit kernel
  Revert "tty: serial: 8250: add CON_CONSDEV to flags"
  Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
  8250_pci: Fix potential use-after-free in error path
  tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
  tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx

Pull USB fixes from Greg KH:
 "Here are a few small USB driver fixes for 4.10-rc4 to resolve some
  reported issues.

  The "largest" here is a number of bugs being fixed in the ch341
  usb-serial driver, to hopefully resolve the mess of different devices
  floating around that use this driver that have been having problems
  with the 4.10-rc1 release.

  There's also a tiny musb fix that I missed in the last pull request,
  as well as the traditional xhci fix rounding out the batch.

  All have been in linux-next with no reported issues"

* tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: fix deadlock at host remove by running watchdog correctly
  USB: serial: ch341: fix control-message error handling
  usb: musb: fix runtime PM in debugfs
  wusbcore: Fix one more crypto-on-the-stack bug
  USB: serial: kl5kusb105: fix line-state error handling
  USB: serial: ch341: fix baud rate and line-control handling
  USB: serial: ch341: fix line settings after reset-resume
  USB: serial: ch341: fix resume after reset
  USB: serial: ch341: fix open error handling
  USB: serial: ch341: fix modem-control and B0 handling
  USB: serial: ch341: fix open and resume after B0
  USB: serial: ch341: fix initial modem-control state

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for I2C. Mostly core this time which is a bit unusual but
  nothing really scary in there"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: Avoid race conditions with IMC
  i2c: fix spelling mistake: "insufficent" -> "insufficient"
  i2c: print correct device invalid address
  i2c: do not enable fall back to Host Notify by default
  i2c: fix kernel memory disclosure in dev interface

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - unwinder fixes
   - AMD CPU topology enumeration fixes
   - microcode loader fixes
   - x86 embedded platform fixes
   - fix for a bootup crash that may trigger when clearcpuid= is used
     with invalid values"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mpx: Use compatible types in comparison to fix sparse error
  x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc()
  x86/entry: Fix the end of the stack for newly forked tasks
  x86/unwind: Include __schedule() in stack traces
  x86/unwind: Disable KASAN checks for non-current tasks
  x86/unwind: Silence warnings for non-current tasks
  x86/microcode/intel: Use correct buffer size for saving microcode data
  x86/microcode/intel: Fix allocation size of struct ucode_patch
  x86/microcode/intel: Add a helper which gives the microcode revision
  x86/microcode: Use native CPUID to tickle out microcode revision
  x86/CPU: Add native CPUID variants returning a single datum
  x86/boot: Add missing declaration of string functions
  x86/CPU/AMD: Fix Bulldozer topology
  x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev'
  x86/cpu: Fix typo in the comment for Anniedale
  x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option

Pull NOHZ fix from Ingo Molnar:
 "This fixes an old NOHZ race where we incorrectly calculate the next
  timer interrupt in certain circumstances where hrtimers are pending,
  that can cause hard to reproduce stalled-values artifacts in
  /proc/stat"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: Fix collision between tick and other hrtimers

Pull perf fixes from Ingo Molnar:
 "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU
  driver fixes, plus miscellanous tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Reject non sampling events with precise_ip
  perf/x86/intel: Account interrupts for PEBS errors
  perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race
  perf/core: Fix sys_perf_event_open() vs. hotplug
  perf/x86/intel: Use ULL constant to prevent undefined shift behaviour
  perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code
  perf/x86: Set pmu->module in Intel PMU modules
  perf probe: Fix to probe on gcc generated symbols for offline kernel
  perf probe: Fix --funcs to show correct symbols for offline module
  perf symbols: Robustify reading of build-id from sysfs
  perf tools: Install tools/lib/traceevent plugins with install-bin
  tools lib traceevent: Fix prev/next_prio for deadline tasks
  perf record: Fix --switch-output documentation and comment
  perf record: Make __record_options static
  tools lib subcmd: Add OPT_STRING_OPTARG_SET option
  perf probe: Fix to get correct modname from elf header
  samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include
  samples/bpf sock_example: Avoid getting ethhdr from two includes
  perf sched timehist: Show total scheduling time

Pull EFI fixes from Ingo Molnar:
 "A number of regression fixes:

   - Fix a boot hang on machines that have somewhat unusual memory map
     entries of phys_addr=0x0 num_pages=0, which broke due to a recent
     commit. This commit got cherry-picked from the v4.11 queue because
     the bug is affecting real machines.

   - Fix a boot hang also reported by KASAN, caused by incorrect init
     ordering introduced by a recent optimization.

   - Fix a recent robustification fix to allocate_new_fdt_and_exit_boot()
     that introduced an invalid assumption. Neither bugs were seen in
     the wild AFAIK"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Prune invalid memory map entries and fix boot regression
  x86/efi: Don't allocate memmap through memblock after mm_init()
  efi/libstub/arm*: Pass latest memory map to the kernel

Pull vfs fixes from Al Viro.

The most notable fix here is probably the fix for a splice regression
("fix a fencepost error in pipe_advance()") noticed by Alan Wylie.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a fencepost error in pipe_advance()
  coredump: Ensure proper size of sparse core files
  aio: fix lock dep warning
  tmpfs: clear S_ISGID when setting posix ACLs

Pull block fixes from Jens Axboe:

 - the virtio_blk stack DMA corruption fix from Christoph, fixing and
   issue with VMAP stacks.

 - O_DIRECT blkbits calculation fix from Chandan.

 - discard regression fix from Christoph.

 - queue init error handling fixes for nbd and virtio_blk, from Omar and
   Jeff.

 - two small nvme fixes, from Christoph and Guilherme.

 - rename of blk_queue_zone_size and bdev_zone_size to _sectors instead,
   to more closely follow what we do in other places in the block layer.
   This interface is new for this series, so let's get the naming right
   before releasing a kernel with this feature. From Damien.

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't try to discard from __blkdev_issue_zeroout
  sd: remove __data_len hack for WRITE SAME
  nvme: use blk_rq_payload_bytes
  scsi: use blk_rq_payload_bytes
  block: add blk_rq_payload_bytes
  block: Rename blk_queue_zone_size and bdev_zone_size
  nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
  nvme-rdma: fix nvme_rdma_queue_is_ready
  virtio_blk: fix panic in initialization error path
  nbd: blk_mq_init_queue returns an error code on failure, not NULL
  virtio_blk: avoid DMA to stack for the sense buffer
  do_direct_IO: Use inode->i_blkbits to compute block count to be cleaned

The logics in pipe_advance() used to release all buffers past the new
position failed in cases when the number of buffers to release was equal
to pipe->buffers.  If that happened, none of them had been released,
leaving pipe full.  Worse, it was trivial to trigger and we end up with
pipe full of uninitialized pages.  IOW, it's an infoleak.

Cc: stable@vger.kernel.org # v4.9
Reported-by: "Alan J. Wylie" <alan@wylie.me.uk>
Tested-by: "Alan J. Wylie" <alan@wylie.me.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If the last section of a core file ends with an unmapped or zero page,
the size of the file does not correspond with the last dump_skip() call.
gdb complains that the file is truncated and can be confusing to users.

After all of the vma sections are written, make sure that the file size
is no smaller than the current file position.

This problem can be demonstrated with gdb's bigcore testcase on the
sparc architecture.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

lockdep reports a warnning. file_start_write/file_end_write only
acquire/release the lock for regular files. So checking the files in aio
side too.

[  453.532141] ------------[ cut here ]------------
[  453.533011] WARNING: CPU: 1 PID: 1298 at ../kernel/locking/lockdep.c:3514 lock_release+0x434/0x670
[  453.533011] DEBUG_LOCKS_WARN_ON(depth <= 0)
[  453.533011] Modules linked in:
[  453.533011] CPU: 1 PID: 1298 Comm: fio Not tainted 4.9.0+ #964
[  453.533011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[  453.533011]  ffff8803a24b7a70 ffffffff8196cffb ffff8803a24b7ae8 0000000000000000
[  453.533011]  ffff8803a24b7ab8 ffffffff81091ee1 ffff8803a5dba700 00000dba00000008
[  453.533011]  ffffed0074496f59 ffff8803a5dbaf54 ffff8803ae0f8488 fffffffffffffdef
[  453.533011] Call Trace:
[  453.533011]  [<ffffffff8196cffb>] dump_stack+0x67/0x9c
[  453.533011]  [<ffffffff81091ee1>] __warn+0x111/0x130
[  453.533011]  [<ffffffff81091f97>] warn_slowpath_fmt+0x97/0xb0
[  453.533011]  [<ffffffff81091f00>] ? __warn+0x130/0x130
[  453.533011]  [<ffffffff8191b789>] ? blk_finish_plug+0x29/0x60
[  453.533011]  [<ffffffff811205d4>] lock_release+0x434/0x670
[  453.533011]  [<ffffffff8198af94>] ? import_single_range+0xd4/0x110
[  453.533011]  [<ffffffff81322195>] ? rw_verify_area+0x65/0x140
[  453.533011]  [<ffffffff813aa696>] ? aio_write+0x1f6/0x280
[  453.533011]  [<ffffffff813aa6c9>] aio_write+0x229/0x280
[  453.533011]  [<ffffffff813aa4a0>] ? aio_complete+0x640/0x640
[  453.533011]  [<ffffffff8111df20>] ? debug_check_no_locks_freed+0x1a0/0x1a0
[  453.533011]  [<ffffffff8114793a>] ? debug_lockdep_rcu_enabled.part.2+0x1a/0x30
[  453.533011]  [<ffffffff81147985>] ? debug_lockdep_rcu_enabled+0x35/0x40
[  453.533011]  [<ffffffff812a92be>] ? __might_fault+0x7e/0xf0
[  453.533011]  [<ffffffff813ac9bc>] do_io_submit+0x94c/0xb10
[  453.533011]  [<ffffffff813ac2ae>] ? do_io_submit+0x23e/0xb10
[  453.533011]  [<ffffffff813ac070>] ? SyS_io_destroy+0x270/0x270
[  453.533011]  [<ffffffff8111d7b3>] ? mark_held_locks+0x23/0xc0
[  453.533011]  [<ffffffff8100201a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[  453.533011]  [<ffffffff813acb90>] SyS_io_submit+0x10/0x20
[  453.533011]  [<ffffffff824f96aa>] entry_SYSCALL_64_fastpath+0x18/0xad
[  453.533011]  [<ffffffff81119190>] ? trace_hardirqs_off_caller+0xc0/0x110
[  453.533011] ---[ end trace b2fbe664d1cc0082 ]---

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull dmaengine fixes from Vinod Koul:
 "The fixes this time around are spread over drivers, pretty normal
  update:

   - PCI ID for SKL ioatdma, workaround for SKX and
     ioat_alloc_chan_resources sleepy allocation fix

   - dw kconfig typo fix

   - null pointer deref for stm32

   - MAINTAINERS Update for at_hdmac

   - pl330 runtime pm fixes

   - omap-dma port window fix

   - rcar-dmac unmap slave resource fix"

* tag 'dmaengine-fix-4.10-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: rcar-dmac: unmap slave resource when channel is freed
  dmaengine: omap-dma: Fix the port_window support
  dmaengine: iota: ioat_alloc_chan_resources should not perform sleeping allocations.
  dmaengine: pl330: Fix runtime PM support for terminated transfers
  MAINTAINERS: dmaengine: Update + Hand over the at_hdmac driver to Ludovic
  dmaengine: omap-dma: Fix dynamic lch_map allocation
  dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
  dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status
  dmaengine: stm32-dma: Set correct args number for DMA request from DT
  dmaengine: dw: fix typo in Kconfig
  dmaengine: ioatdma: workaround SKX ioatdma version
  dmaengine: ioatdma: Add Skylake PCI Dev ID

Some machines, such as the Lenovo ThinkPad W541 with firmware GNET80WW
(2.28), include memory map entries with phys_addr=0x0 and num_pages=0.

These machines fail to boot after the following commit,

  commit 8e80632f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")

Fix this by removing such bogus entries from the memory map.

Furthermore, currently the log output for this case (with efi=debug)
looks like:

 [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |  |  |  |  |  ] range=[0x0000000000000000-0xffffffffffffffff] (0MB)

This is clearly wrong, and also not as informative as it could be.  This
patch changes it so that if we find obviously invalid memory map
entries, we print an error and skip those entries.  It also detects the
display of the address range calculation overflow, so the new output is:

 [    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
 [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)

It also detects memory map sizes that would overflow the physical
address, for example phys_addr=0xfffffffffffff000 and
num_pages=0x0200000000000001, and prints:

 [    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
 [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[phys_addr=0xfffffffffffff000-0x20ffffffffffffffff] (invalid)

It then removes these entries from the memory map.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ardb: refactor for clarity with no functional changes, avoid PAGE_SHIFT]
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
[Matt: Include bugzilla info in commit log]
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191121Signed-off-by: Ingo Molnar <mingo@kernel.org>

This reverts commit 6751667a.

Rob Herring objected to it, and a replacement for it will be added using
debugfs in the future.

Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As Peter suggested [1] rejecting non sampling PEBS events,
because they dont make any sense and could cause bugs
in the NMI handler [2].

  [1] http://lkml.kernel.org/r/20170103094059.GC3093@worktop
  [2] http://lkml.kernel.org/r/1482931866-6018-3-git-send-email-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20170103142454.GA26251@kravaSigned-off-by: Ingo Molnar <mingo@kernel.org>

It's possible to set up PEBS events to get only errors and not
any data, like on SNB-X (model 45) and IVB-EP (model 62)
via 2 perf commands running simultaneously:

    taskset -c 1 ./perf record -c 4 -e branches:pp -j any -C 10

This leads to a soft lock up, because the error path of the
intel_pmu_drain_pebs_nhm() does not account event->hw.interrupt
for error PEBS interrupts, so in case you're getting ONLY
errors you don't have a way to stop the event when it's over
the max_samples_per_tick limit:

  NMI watchdog: BUG: soft lockup - CPU#22 stuck for 22s! [perf_fuzzer:5816]
  ...
  RIP: 0010:[<ffffffff81159232>]  [<ffffffff81159232>] smp_call_function_single+0xe2/0x140
  ...
  Call Trace:
   ? trace_hardirqs_on_caller+0xf5/0x1b0
   ? perf_cgroup_attach+0x70/0x70
   perf_install_in_context+0x199/0x1b0
   ? ctx_resched+0x90/0x90
   SYSC_perf_event_open+0x641/0xf90
   SyS_perf_event_open+0x9/0x10
   do_syscall_64+0x6c/0x1f0
   entry_SYSCALL64_slow_path+0x25/0x25

Add perf_event_account_interrupt() which does the interrupt
and frequency checks and call it from intel_pmu_drain_pebs_nhm()'s
error path.

We keep the pending_kill and pending_wakeup logic only in the
__perf_event_overflow() path, because they make sense only if
there's any data to deliver.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1482931866-6018-2-git-send-email-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Di Shen reported a race between two concurrent sys_perf_event_open()
calls where both try and move the same pre-existing software group
into a hardware context.

The problem is exactly that described in commit:

  f63a8daa ("perf: Fix event->ctx locking")

... where, while we wait for a ctx->mutex acquisition, the event->ctx
relation can have changed under us.

That very same commit failed to recognise sys_perf_event_context() as an
external access vector to the events and thereby didn't apply the
established locking rules correctly.

So while one sys_perf_event_open() call is stuck waiting on
mutex_lock_double(), the other (which owns said locks) moves the group
about. So by the time the former sys_perf_event_open() acquires the
locks, the context we've acquired is stale (and possibly dead).

Apply the established locking rules as per perf_event_ctx_lock_nested()
to the mutex_lock_double() for the 'move_group' case. This obviously means
we need to validate state after we acquire the locks.

Reported-by: Di Shen (Keen Lab)
Tested-by: John Dias <joaodias@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Min Chong <mchong@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: f63a8daa ("perf: Fix event->ctx locking")
Link: http://lkml.kernel.org/r/20170106131444.GZ3174@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

There is problem with installing an event in a task that is 'stuck' on
an offline CPU.

Blocked tasks are not dis-assosciated from offlined CPUs, after all, a
blocked task doesn't run and doesn't require a CPU etc.. Only on
wakeup do we ammend the situation and place the task on a available
CPU.

If we hit such a task with perf_install_in_context() we'll loop until
either that task wakes up or the CPU comes back online, if the task
waking depends on the event being installed, we're stuck.

While looking into this issue, I also spotted another problem, if we
hit a task with perf_install_in_context() that is in the middle of
being migrated, that is we observe the old CPU before sending the IPI,
but run the IPI (on the old CPU) while the task is already running on
the new CPU, things also go sideways.

Rework things to rely on task_curr() -- outside of rq->lock -- which
is rather tricky. Imagine the following scenario where we're trying to
install the first event into our task 't':

CPU0            CPU1            CPU2

                (current == t)

t->perf_event_ctxp[] = ctx;
smp_mb();
cpu = task_cpu(t);

                switch(t, n);
                                migrate(t, 2);
                                switch(p, t);

                                ctx = t->perf_event_ctxp[]; // must not be NULL

smp_function_call(cpu, ..);

                generic_exec_single()
                  func();
                    spin_lock(ctx->lock);
                    if (task_curr(t)) // false

                    add_event_to_ctx();
                    spin_unlock(ctx->lock);

                                perf_event_context_sched_in();
                                  spin_lock(ctx->lock);
                                  // sees event

So its CPU0's store of t->perf_event_ctxp[] that must not go 'missing'.
Because if CPU2's load of that variable were to observe NULL, it would
not try to schedule the ctx and we'd have a task running without its
counter, which would be 'bad'.

As long as we observe !NULL, we'll acquire ctx->lock. If we acquire it
first and not see the event yet, then CPU0 must observe task_curr()
and retry. If the install happens first, then we must see the event on
sched-in and all is well.

I think we can translate the first part (until the 'must not be NULL')
of the scenario to a litmus test like:

  C C-peterz

  {
  }

  P0(int *x, int *y)
  {
          int r1;

          WRITE_ONCE(*x, 1);
          smp_mb();
          r1 = READ_ONCE(*y);
  }

  P1(int *y, int *z)
  {
          WRITE_ONCE(*y, 1);
          smp_store_release(z, 1);
  }

  P2(int *x, int *z)
  {
          int r1;
          int r2;

          r1 = smp_load_acquire(z);
	  smp_mb();
          r2 = READ_ONCE(*x);
  }

  exists
  (0:r1=0 /\ 2:r1=1 /\ 2:r2=0)

Where:
  x is perf_event_ctxp[],
  y is our tasks's CPU, and
  z is our task being placed on the rq of CPU2.

The P0 smp_mb() is the one added by this patch, ordering the store to
perf_event_ctxp[] from find_get_context() and the load of task_cpu()
in task_function_call().

The smp_store_release/smp_load_acquire model the RCpc locking of the
rq->lock and the smp_mb() of P2 is the context switch switching from
whatever CPU2 was running to our task 't'.

This litmus test evaluates into:

  Test C-peterz Allowed
  States 7
  0:r1=0; 2:r1=0; 2:r2=0;
  0:r1=0; 2:r1=0; 2:r2=1;
  0:r1=0; 2:r1=1; 2:r2=1;
  0:r1=1; 2:r1=0; 2:r2=0;
  0:r1=1; 2:r1=0; 2:r2=1;
  0:r1=1; 2:r1=1; 2:r2=0;
  0:r1=1; 2:r1=1; 2:r2=1;
  No
  Witnesses
  Positive: 0 Negative: 7
  Condition exists (0:r1=0 /\ 2:r1=1 /\ 2:r2=0)
  Observation C-peterz Never 0 7
  Hash=e427f41d9146b2a5445101d3e2fcaa34

And the strong and weak model agree.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Will Deacon <will.deacon@arm.com>
Cc: jeremy.linton@arm.com
Link: http://lkml.kernel.org/r/20161209135900.GU3174@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

info->si_addr is of type void __user *, so it should be compared against
something from the same address space.

This fixes the following sparse error:

  arch/x86/mm/mpx.c:296:27: error: incompatible types in comparison expression (different address spaces)
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The Intel Denverton microserver uses a 25 MHz TSC crystal,
so we can derive its exact [*] TSC frequency
using CPUID and some arithmetic, eg.:

  TSC: 1800 MHz (25000000 Hz * 216 / 3 / 1000000)

[*] 'exact' is only as good as the crystal, which should be +/- 20ppm
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/306899f94804aece6d8fa8b4223ede3b48dbb59c.1484287748.git.len.brown@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>