- 24 Sep, 2012 40 commits
-
-
Samuel Ortiz authored
As we don't have a primary handler but only a threaded one, __setup_irq() ends up failing if we don't set this flag. Signed-off-by:Samuel Ortiz <sameo@linux.intel.com>
-
Tejun Heo authored
NFC driver doesn't sit in memory reclaim path and has no reason to use WQ_MEM_RECLAIM. Drop WQ_MEM_RECLAIM from pn533->wq and use alloc_ordered_workqueue() instead of WQ_UNBOUND w/ max_active == 1. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
NFC is using a number of custom ordered workqueues w/ WQ_MEM_RECLAIM. WQ_MEM_RECLAIM is unnecessary unless NFC is gonna be used as transport for storage device, and all use cases match one work item to one ordered workqueue - IOW, there's no actual ordering going on at all and using system_nrt_wq gives the same behavior. There's nothing to be gained by using custom workqueues. Use system_nrt_wq instead and drop all the custom ones. Signed-off-by:
-
Syam Sidhardhan authored
This patch remove the repeated code for checking llcp_sock & llcp_sock->dev against NULL. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Syam Sidhardhan authored
Simplify the code by make use of module_platform_driver macro. Signed-off-by:
-
Ilan Elias authored
During NFC-DEP target activation, store the remote general bytes to be used later in dep_link_up. When dep_link_up is called, activate the NFC-DEP target, and forward the remote general bytes. When dep_link_down is called, deactivate the target. Signed-off-by:
Ilan Elias <ilane@ti.com> Signed-off-by:
-
Ilan Elias authored
Signed-off-by:
-
Ilan Elias authored
If initiator protocol is NFC-DEP, set the local general bytes in nci_start_poll. Signed-off-by:
-
Samuel Ortiz authored
Instead of returning EBUSY when getting a command while another one is running, we queue them. Upon completion of the pending command, the next one is processed. Besides the fact that it simplifies the pn533 locking scheme, it also comes with the nice side effect of fixing the following warning: [ 82.274297] ===================================== [ 82.274297] [ BUG: bad unlock balance detected! ] [ 82.274298] 3.5.0-rc1+ #1 Not tainted [ 82.274299] ------------------------------------- [ 82.274300] kworker/u:1/16 is trying to release lock (&dev->cmd_lock) at: [ 82.274305] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274305] but there are no more locks to release! [ 82.274306] [ 82.274306] other info that might help us debug this: [ 82.274306] 2 locks held by kworker/u:1/16: [ 82.274311] #0: (pn533){.+.+..}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] #1: ((&dev->cmd_work)){+.+...}, at: [<ffffffff8103a67d>] +process_one_work+0x145/0x2e2 [ 82.274314] [ 82.274314] stack backtrace: [ 82.274315] Pid: 16, comm: kworker/u:1 Not tainted 3.5.0-rc1+ #1 [ 82.274315] Call Trace: [ 82.274317] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274321] [<ffffffff81059841>] print_unlock_inbalance_bug+0xda/0xe4 [ 82.274323] [<ffffffff8105c74c>] lock_release_non_nested+0xb2/0x232 [ 82.274325] [<ffffffff8105a61e>] ? mark_held_locks+0x6d/0x95 [ 82.274326] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274328] [<ffffffff81451105>] ? _raw_spin_unlock_irqrestore+0x40/0x5c [ 82.274329] [<ffffffff8144f246>] ? mutex_unlock+0x9/0xb [ 82.274330] [<ffffffff8105ca42>] lock_release+0x176/0x1ac [ 82.274333] [<ffffffff8123de14>] ? pn533_send_complete+0xa8/0xa8 [ 82.274334] [<ffffffff8144f1d6>] __mutex_unlock_slowpath+0xb0/0x117 [ 82.274336] [<ffffffff8144f246>] mutex_unlock+0x9/0xb [ 82.274337] [<ffffffff8123de65>] pn533_wq_cmd_complete+0x51/0x55 [ 82.274338] [<ffffffff8103a6db>] process_one_work+0x1a3/0x2e2 [ 82.274340] [<ffffffff8103a67d>] ? process_one_work+0x145/0x2e2 [ 82.274341] [<ffffffff8103b119>] worker_thread+0xcf/0x153 [ 82.274343] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274344] [<ffffffff8103b04a>] ? manage_workers.isra.22+0x16b/0x16b [ 82.274346] [<ffffffff8103eb11>] kthread+0x95/0x9d [ 82.274348] [<ffffffff81452ef4>] kernel_thread_helper+0x4/0x10 [ 82.274351] [<ffffffff81046561>] ? finish_task_switch+0x45/0xc3 [ 82.274352] [<ffffffff814514f0>] ? retint_restore_args+0x13/0x13 [ 82.274353] [<ffffffff8103ea7c>] ? __init_kthread_worker+0x55/0x55 [ 82.274354] [<ffffffff81452ef0>] ? gs_change+0x13/0x13 Signed-off-by: -
Chun-Yeow Yeoh authored
Hardware support for MFP is not available in ath5k. Thus, this implementation allows the mac80211 stack to do the actuall crypto operation. Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
Previously, it was not possible to connect to networks which requires 11w to be supported by the stations. While the documentation hints that there's some hardware support for offloading MFP "decryption", this simple implementation relies on the mac80211 stack to do the actual crypto operations. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Christian Lamparter authored
Previously, it was not possible to connect to networks which requires 11w to be supported by the stations. Note: As all current (and old) firmwares corrupt incoming, protected management frames, the decryption offloading needs to be disabled. This will be done automatically if needed. Signed-off-by:
-
Johannes Berg authored
Instead of copying from a constant array (which is still needed for other purposes) Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Paul Bolle authored
Building the libipw component without CONFIG_LIBIPW_DEBUG set triggers this GCC warning: drivers/net/wireless/ipw2x00/libipw_wx.c:526:21: warning: unused variable 'dev' [-Wunused-variable] The cause of this warning is that, without CONFIG_LIBIPW_DEBUG set, LIBIPW_DEBUG_WX compiles away. Fix it by substituting ieee->dev for (its equivalent) dev. Signed-off-by:Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Tested-by:
Jack <x6719620@gmail.com> Signed-off-by:
-
Amitkumar Karwar authored
Currently scan operation is delayed/aborted based on Tx traffic consistency. This decision is taken after receiving scan response of first scan command from FW. But when heavy traffic is running, we can not even afford to send first scan command and go off channel for 30msec. We will block scan request in this case. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
By default, device is disconnected before entering suspend state. User can keep the connection alive by using module parameter "disconect_on_suspend=0". Signed-off-by:
-
Arend van Spriel authored
Field 'pub' in struct brcmf_cfg80211_priv was types as void pointer and filled with parameter passed in brcmf_cfg80211_attach(). This patch makes the type specific, ie. struct brcmf_pub. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Small step to fix structure commenting using kernel-doc syntax. Reviewed-by:
-
Hante Meuleman authored
On a usb error the lock bit should be cleared. Reviewed-by:
-
Piotr Haber authored
This patch fixes a bug when device is being started while RfKill switch is engaged, leading to hang due to partial initialization of hardware. Tested-by: <dragonn@op.pl> Reviewed-by:
Piotr Haber <phaber@broadcom.com> Signed-off-by:
-
Hante Meuleman authored
clean up code. Reviewed-by:
-
Hante Meuleman authored
This patch fixes a bug in routine where phy bands are determined. Reviewed-by:
-
Hante Meuleman authored
clean up code. Reviewed-by:
-
Franky Lin authored
SDIO read non-glomming frame routine handles first frame and follow up frame read separately. But they share a lot of common code. This patch abstracts a brcmf_sdio_hdparser function and optimize the code flow for better readability and future optimization. Reviewed-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Hante Meuleman authored
For suspend/resume it is necessary to store firmware in memory. In order to support multiple usb dongles at the same time a linked list of firmwares was created. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
-
Hante Meuleman authored
Some events result in printing of the buffer when debug is enabled. This printing was not very efficient. Changed to macro so it comes out nice and clean without filling log buffer. Reviewed-by:
-
Arend van Spriel authored
This change add support for NL80211 scheduled scan. This may be used to offload scanning to the device, which may give the host opportunity to sleep. The newer versions of wpa_supplicant have support for this functionality. Reviewed-by:
-
Arend van Spriel authored
With the introduction of E-Scan there are two scan mechanisms in the driver. I-Scan was aborted on suspend and bringing down the device using brcmf_term_iscan(). The function has been renamed to brcmf_abort_scanning() and covers e-scan abort as well. Reviewed-by:
-
Arend van Spriel authored
With the introduction of e-scan mechanism in brcmfmac (e756af5b brcmfmac: add e-scan support.) a couple of sparse warnings were introduced. This patch resolves those. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Reviewed-by:
-
Amitkumar Karwar authored
When delayed scan operation is resumed, we just add next scan command in queue but don't wakeup main thread to process the command. Hence the command is downloaded to firmware only after waking up the main thread by any other means. This bug which was introduced after "mwifiex: improve scan delay logic.." patch is fixed here. Signed-off-by:
-
Gertjan van Wingerde authored
Setting of the individual fields of the RF register can be simplified. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Gertjan van Wingerde authored
Signed-off-by:
-
Gertjan van Wingerde authored
Move RT3290 BBP initialization sequence (part) to the right place in the code. This is just a code style change, no functional changes. Signed-off-by:
-
Gertjan van Wingerde authored
Align with the values used by the RT3572 Ralink vendor driver v2.5.0.0. Signed-off-by:
-
Gertjan van Wingerde authored
Make the code in rt2800_get_default_vgc more understandable and readable, especially for the 5GHz band values. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
Sujith Manoharan authored
This patch adds a new callback to handle WLAN RX diversity for AR9565. Signed-off-by:
-
Sujith Manoharan authored
Signed-off-by:
-
