- 26 Mar, 2006 40 commits
-
-
Dave Peterson authored
Fix spelling errors in EDAC documentation. Signed-off-by:
David S. Peterson <dsp@llnl.gov> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dave Peterson authored
Cosmetic indentation/formatting cleanup for EDAC code. Make sure we are using tabs rather than spaces to indent, etc. Signed-off-by:
-
Dave Peterson authored
Fix EDAC code so EXPORT_SYMBOL comes after the function that is being exported. This is to maintain consistency with the rest of the kernel. Signed-off-by:
-
Dave Peterson authored
- Add x86 dependency in drivers/edac/Kconfig for all current platform-specific modules. - Add PCI dependency to Radisys 82600 driver Signed-off-by:
-
Dave Peterson authored
- Fix code so we always hold mem_ctls_mutex while we are stepping through the list of mem_ctl_info structures. Otherwise bad things may happen if one task is stepping through the list while another task is modifying it. We may eventually want to use reference counting to manage the mem_ctl_info structures. In the meantime we may as well fix this bug. - Don't disable interrupts while we are walking the list of mem_ctl_info structures in check_mc_devices(). This is unnecessary. Signed-off-by:
-
Dave Peterson authored
- After we unregister a kobject, wait for our kobject release method to call complete(). This causes us to wait until the kobject reference count reaches 0. Otherwise, a task accessing the EDAC sysfs interface can hold the reference count above 0 until after the EDAC module has been unloaded. When the reference count finally drops to 0, this will result in an attempt to call our release method inside the EDAC module after the module has already been unloaded. This isn't the best fix, since a process can get stuck sleeping forever uninterruptibly if the user does the following: rmmod my_module < /sys/my_sysfs/file I'll go back and implement a better fix later. However this should be ok for now. - Call edac_remove_sysfs_mci_device() from edac_mc_del_mc() rather than from edac_mc_free(). Since edac_mc_add_mc() calls edac_create_sysfs_mci_device(), edac_mc_del_mc() should call edac_remove_sysfs_mci_device(). Signed-off-by: -
Dave Peterson authored
- Remove calls to kobject_init(). These are unnecessary because kobject_register() calls kobject_init(). - Remove extra calls to kobject_put(). When we call kobject_unregister(), this releases our reference to the kobject. The extra calls to kobject_put() may cause the reference count to drop to 0 while a kobject is still in use. Signed-off-by:
-
Dave Peterson authored
This is part 2 of a 2-part patch set. Fix edac_mc_add_mc() so it cleans up properly if call to edac_create_sysfs_mci_device() fails. Signed-off-by:
-
Dave Peterson authored
This is part 1 of a 2-part patch set. The code changes are split into two parts to make the patches more readable. Move complete_mc_list_del() and del_mc_from_global_list() so we can call del_mc_from_global_list() from edac_mc_add_mc() without forward declarations. Perhaps using forward declarations would be better? I'm doing things this way because the rest of the code is missing them. Signed-off-by:
-
Dave Peterson authored
Fix xxx_probe1() functions so they call xxx_get_error_info() functions to clear initial errors. This is simpler and cleaner than duplicating the low-level code for accessing PCI config space. Signed-off-by:
-
Dave Peterson authored
Fix minor logic bug in e7xxx_remove_one(). Signed-off-by:
-
Dave Peterson authored
- Fix i82875p_probe1() so it calls pci_get_device() instead of pci_find_device(). - Fix i82875p_probe1() so it cleans up properly on failure. - Fix i82875p_init() so it cleans up properly on failure. Signed-off-by:
-
Dave Peterson authored
- Fix i82860_init() so it cleans up properly on failure. - Fix i82860_exit() so it cleans up properly. - Fix typo in comment (i.e. www.redhat.com.com). Signed-off-by:
-
Dave Peterson authored
- Add ctl_dev field to "struct e752x_dev_info". Then we can eliminate ugly switch statement from e752x_probe1(). - Remove code from e752x_probe1() that clears initial PCI bus parity errors. The core EDAC module already does this. Signed-off-by:
-
Dave Peterson authored
Eliminate unnecessary calls to pci_dev_get() and pci_dev_put() from amd76x driver. Signed-off-by:
-
Dave Peterson authored
Perform the following name substitutions on all source files: sed 's/BS_MOD_STR/EDAC_MOD_STR/g' sed 's/bs_thread_info/edac_thread_info/g' sed 's/bs_thread/edac_thread/g' sed 's/bs_xstr/edac_xstr/g' sed 's/bs_str/edac_str/g' The names that start with BS_ or bs_ are artifacts of when the code was called "bluesmoke". Signed-off-by: -
Dave Peterson authored
This implements the following idea: On Monday 30 January 2006 19:22, Eric W. Biederman wrote: > One piece missing from this conversation is the issue that we need errors > in a uniform format. That is why edac_mc has helper functions. > > However there will always be errors that don't fit any particular model. > Could we add a edac_printk(dev, ); That is similar to dev_printk but > prints out an EDAC header and the device on which the error was found? > Letting the rest of the string be user specified. > > For actual control that interface may be to blunt, but at least for people > looking in the logs it allows all of the errors to be detected and > harvested. Signed-off-by:
-
Dave Peterson authored
This patch was originally posted by Christoph Hellwig (see http://lkml.org/lkml/2006/2/14/331): "Christoph Hellwig" <hch@lst.de> wrote: > Use the kthread_ API instead of opencoding lots of hairy code for kernel > thread creation and teardown, including tasklist_lock abuse. > Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Eric Sesterhenn authored
This fixes coverity id #2. the if (i==0) is pretty useless, since we assing i=0, just the line before. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the connection-specific module "usb_gigaset", the hardware driver for Gigaset base stations connected via the M105 USB DECT adapter. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination, as well as handling asynchronous data transfers, PPP framing, byte stuffing, and flow control. Signed-off-by:
Hansjoerg Lipp <hjlipp@web.de> Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the payload data handler for the connection-specific module "bas_gigaset". It contains the code for handling isochronous data transfers, HDLC framing and flow control. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the main source file of the connection-specific module "bas_gigaset", the hardware driver for Gigaset base stations connected directly to the computer via USB. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the procfs interface to the gigaset module. The procfs interface provides access to status information and statistics about the Gigaset devices. If the drivers are built with the debugging option it also allows to change the amount of debugging output on the fly. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the tty interface to the gigaset module. The tty interface provides direct access to the AT command set of the Gigaset devices. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the isdn4linux subsystem interface to the gigaset module. The isdn4linux subsystem interface handles requests from and notifications to the isdn4linux subsystem. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the event layer to the gigaset module. The event layer serializes events from hardware, userspace, and other kernel subsystems. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> This patch adds the common include file for the Siemens Gigaset drivers, providing definitions used by all of the Gigaset ISDN driver source files. It also adds the main source file of the gigaset module which manages common functions not specific to the type of connection to the device. Signed-off-by:
-
Hansjoerg Lipp authored
And: Tilman Schmidt <tilman@imap.cc> The following patches add drivers for the Siemens Gigaset 3070 family of ISDN DECT PABXes connected via USB, either directly or over a DECT link using a Gigaset M105 or compatible DECT data adapter. The devices are integrated as ISDN adapters within the isdn4linux framework, supporting incoming and outgoing voice and data connections, and also as tty devices providing access to device specific AT commands. Supported devices include models 3070, 3075, 4170, 4175, SX205, SX255, and SX353 from the Siemens Gigaset product family, as well as the technically identical models 45isdn and 721X from the Deutsche Telekom Sinus series. Supported DECT adapters are the Gigaset M105 data and the technically identical Gigaset USB Adapter DECT, Sinus 45 data 2, and Sinus 721 data (but not the Gigaset M34 and Sinus 702 data which advertise themselves as CDC-ACM devices). These drivers have been developed over the last four years within the SourceForge project http://sourceforge.net/projects/gigaset307x/. They are being used successfully in several installations for dial-in Internet access and for voice call switching with Asterisk. This is our second attempt at submitting these drivers, taking into account the comments we received to our first submission on 2005-12-11. The patch set adds three kernel modules: - a common module "gigaset" encapsulating the common logic for controlling the PABX and the interfaces to userspace and the isdn4linux subsystem. - a connection-specific module "bas_gigaset" which handles communication with the PABX over a direct USB connection. - a connection-specific module "usb_gigaset" which does the same for a DECT connection using the Gigaset M105 USB DECT adapter. We also have a module "ser_gigaset" which supports the Gigaset M101 RS232 DECT adapter, but we didn't judge it fit for inclusion in the kernel, as it does direct programming of a i8250 serial port. It should probably be rewritten as a serial line discipline but so far we lack the neccessary knowledge about writing a line discipline for that. The drivers have been working with kernel releases 2.2 and 2.4 as well as 2.6, and although we took efforts to remove the compatibility code for this submission, it probably still shows in places. Please make allowances. This patch: Prepare the kernel build infrastructure for addition of the Gigaset ISDN drivers. It creates a Makefile and Kconfig file for the Gigaset driver and hooks them into those of the isdn4linux subsystem. It also adds a MAINTAINERS entry for the driver. This patch depends on patches 2 to 9 of the present set, as without the actual source files, activating the options added here will cause the kernel build to fail. Signed-off-by:
-
Prasanna S Panchamukhi authored
Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. I could not test this patch for sparc64. Signed-off-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Prasanna S Panchamukhi authored
Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by:
-
Prasanna S Panchamukhi authored
Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by:
-
Prasanna S Panchamukhi authored
Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by:
-
Prasanna S Panchamukhi authored
Provide proper kprobes fault handling, if a user-specified pre/post handlers tries to access user address space, through copy_from_user(), get_user() etc. The user-specified fault handler gets called only if the fault occurs while executing user-specified handlers. In such a case user-specified handler is allowed to fix it first, later if the user-specifed fault handler does not fix it, we try to fix it by calling fix_exception(). The user-specified handler will not be called if the fault happens when single stepping the original instruction, instead we reset the current probe and allow the system page fault handler to fix it up. Signed-off-by:
-
bibo,mao authored
Currently kprobe handler traps only happen in kernel space, so function kprobe_exceptions_notify should skip traps which happen in user space. This patch modifies this, and it is based on 2.6.16-rc4. Signed-off-by:
bibo mao <bibo.mao@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: <hiramatu@sdl.hitachi.co.jp> Signed-off-by:
-
bibo mao authored
When kretprobe probes the schedule() function, if the probed process exits then schedule() will never return, so some kretprobe instances will never be recycled. In this patch the parent process will recycle retprobe instances of the probed function and there will be no memory leak of kretprobe instances. Signed-off-by:
-
Masami Hiramatsu authored
In normal operation, kretprobe makes a target function return to trampoline code. A kprobe (called trampoline_probe) has been inserted in the trampoline code. When the kernel hits this kprobe, it calls kretprobe's handler and it returns to the original return address. Kretprobe-booster removes the trampoline_probe. It allows the trampoline code to call kretprobe's handler directly instead of invoking kprobe. The trampoline code returns to the original return address. (changelog from Chuck Ebbert <76306.1226@compuserve.com> - thanks ;)) Signed-off-by:
Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Masami Hiramatsu authored
Current kprobe copies the original instruction at the probe point and replaces it with a breakpoint instruction (int3). When the kernel hits the probe point, kprobe handler is invoked. And the copied instruction is single-step executed on the copied buffer (not on the original address) by kprobe. After that, the kprobe checks registers and modify it (if need) as if the instructions was executed on the original address. My proposal is based on the fact there are many instructions which do NOT require the register modification after the single-step execution. When the copied instruction is a kind of them, kprobe just jumps back to the next instruction after single-step execution. If so, why don't we execute those instructions directly? With kprobe-booster patch, kprobes will execute a copied instruction directly and (if need) jump back to original code. This direct execution is executed when the kprobe don't have both post_handler and break_handler, and the copied instruction can be executed directly. I sorted instructions which can be executed directly or not; - Call instructions are NG(can not be executed directly). We should correct the return address pushed into top of stack. - Indirect instructions except for absolute indirect-jumps are NG. Those instructions changes EIP randomly. We should check EIP and correct it. - Instructions that change EIP beyond the range of the instruction buffer are NG. - Instructions that change EIP to tail 5 bytes of the instruction buffer (it is the size of a jump instruction). We must write a jump instruction which backs to original kernel code in the instruction buffer. - Break point instruction is NG. We should not touch EIP and pass to other handlers. - Absolute direct/indirect jumps are OK.- Conditional Jumps are NG. - Halt and software-interruptions are NG. Because it will stay on the instruction buffer of kprobes. - Prefixes are NG. - Unknown/reserved opcode is NG. - Other 1 byte instructions are OK. But those instructions need a jump back code. - 2 bytes instructions are mapped sparsely. So, in this release, this patch don't boost those instructions. >From Intel's IA-32 opcode map described in IA-32 Intel Architecture Software Developer's Manual Vol.2 B, I determined that following opcodes are not boostable. - 0FH (2byte escape) - 70H - 7FH (Jump on condition) - 9AH (Call) and 9CH (Pushf) - C0H-C1H (Grp 2: includes reserved opcode) - C6H-C7H (Grp11: includes reserved opcode) - CCH-CEH (Software-interrupt) - D0H-D3H (Grp2: includes reserved opcode) - D6H (Reserved) - D8H-DFH (Coprocessor) - E0H-E3H (loop/conditional jump) - E8H (Call) - F0H-F3H (Prefixes and reserved) - F4H (Halt) - F6H-F7H (Grp3: includes reserved opcode) - FEH-FFH(Grp4,5: includes reserved opcode) Kprobe-booster checks whether target instruction can be boosted (can be executed directly) at arch_copy_kprobe() function. If the target instruction can be boosted, it clears "boostable" flag. If not, it sets "boostable" flag -1. This is disabled status. In resume_execution() function, If "boostable" flag is cleared, kprobe-booster measures the size of the target instruction and sets "boostable" flag 1. In kprobe_handler(), kprobe checks the "boostable" flag. If the flag is 1, it resets current kprobe and executes instruction buffer directly instead of single stepping. When unregistering a boosted kprobe, it calls synchronize_sched() after "int3" is removed. So we can ensure followings after the synchronize_sched() called. - interrupt handlers are finished on all CPUs. - instruction buffer is not executed on all CPUs. And we can release the boosted kprobe safely. And also, on preemptible kernel, the booster is not enabled where the kernel preemption is enabled. So, there are no preempted threads on the instruction buffer. The description of kretprobe-booster: ==================================== In the normal operation, kretprobe make a target function return to trampoline code. And a kprobe (called trampoline_probe) have been inserted at the trampoline code. When the kernel hits this kprobe, it calls kretprobe's handler and it returns to original return address. Kretprobe-booster patch removes the trampoline_probe. It allows the trampoline code to call kretprobe's handler directly instead of invoking kprobe. And tranpoline code returns to original return address. This new trampoline code stores and restores registers, so the kretprobe handler is still able to access those registers. Current kprobe has about 1.3 usec/probe(*) overhead, and kprobe-booster patch reduces it to 0.6 usec/probe(*). Also current kretprobe has about 2.0 usec/probe(*) overhead. Kprobe-booster patch reduces it to 1.3 usec/probe(*), and the combination of both kprobe-booster patch and kretprobe-booster patch reduces it to 0.9 usec/probe(*). I expect the combination of both patches can reduce half of a probing overhead. Performance numbers strongly depend on the processor model. Andrew Morton wrote: > These preempt tricks look rather nasty. Can you please describe what the > problem is, precisely? And how this code avoids it? Perhaps we can find > something cleaner. The problem is how to remove the copied instructions of the kprobe *safely* on the preemptable kernel (CONFIG_PREEMPT=y). Kprobes basically executes the following actions; (1)int3 (2)preempt_disable() (3)kprobe_prehandler() (4)copied instructioin(single step) (5)kprobe_posthandler() (6)preempt_enable() (7)return to the original code During the execution of copied instruction, preemption is disabled (from step (2) to (6)). When unregistering the probes, Kprobe waits for RCU quiescent state by using synchronize_sched() after removing int3 instruction. Thus we can ensure the copied instruction is not executed. On the other hand, kprobe-booster executes the following actions; (1)int3 (2)preempt_disable() (3)kprobe_prehandler() (4)preempt_enable() <-- this one is added by my patch (5)copied instruction(direct execution) (6)jmp back to the original code The problem is that we have no way to prevent preemption on step (5) or (6). We cannot call preempt_disable() after step (6), because there are no rooms to do that. Thus, some other processes may be preempted at step(5) or (6) on preemptable kernel. And I couldn't find the easy way to ensure that other processes' stack do *not* have the address of them. (I thought some way to do that, but those are very costly.) So currently, I simply boost the kprobe only when the probe point is already preemption disabled. > Also, the patch adds a preempt_enable() but I don't see a corresponding > preempt_disable(). Am I missing something? It is corresponding to the preempt_disable() in the top of kprobe_handler(). I copied the code of kprobe_handler() here: static int __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p; int ret = 0; kprobe_opcode_t *addr = NULL; unsigned long *lp; struct kprobe_ctlblk *kcb; /* * We don't want to be preempted for the entire * duration of kprobe processing */ preempt_disable(); <-- HERE kcb = get_kprobe_ctlblk(); Signed-off-by: -
Masami Hiramatsu authored
Clean up kprobe's resume_execute() for i386 arch. Signed-off-by:
-
Roman Zippel authored
The nanosleep cleanup allows to remove the data field of hrtimer. The callback function can use container_of() to get it's own data. Since the hrtimer structure is anyway embedded in other structures, this adds no overhead. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Roman Zippel authored
nsec_t predates ktime_t and has mostly been superseded by it. In the few places that are left it's better to make it explicit that we're dealing with 64 bit values here. Signed-off-by:
John Stultz <johnstul@us.ibm.com> Signed-off-by:
-
