- 23 Jul, 2020 35 commits
-
-
Alexander Lobakin authored
Make the file more readable and easier for adding new fields. Misc: use IFNAMSIZ and netdev_name() instead of sizeof_field() and direct net_device::name dereferencing. Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Lobakin authored
Add reverse-variants of qed_chain_get_elem_left{,u32}() to be able to know current chain occupation. They will be used in the upcoming qede XDP_REDIRECT code. They share most of the logics with the mentioned ones, so were reused to collapse the latters. Signed-off-by: -
Alexander Lobakin authored
Constify chain pointers and refactor qed_chain_get_elem_left{,u32}() a bit. Signed-off-by: -
Alexander Lobakin authored
Extend current infrastructure to store chain page size in a struct and use it in all functions instead of fixed QED_CHAIN_PAGE_SIZE. Its value remains the default one, but can be overridden in qed_chain_init_params before chain allocation. Signed-off-by:
-
Alexander Lobakin authored
To simplify qed_chain_alloc() prototype and call sites, introduce struct qed_chain_init_params to specify chain params, and pass a pointer to filled struct to the actual qed_chain_alloc() instead of a long list of separate arguments. Signed-off-by:
-
Alexander Lobakin authored
Fill PBL table parameters for chains with an external PBL data earlier on qed_chain_init_params() rather than on allocation itself. This simplifies allocation code and allows to extend struct ext_pbl for other chain types. Signed-off-by:
-
Alexander Lobakin authored
qed_chain_init*() are used in one file/place on "cold" path only, so they can be uninlined and moved next to the call sites. Signed-off-by:
-
Alexander Lobakin authored
PBL chain elements are actually DMA addresses stored in __le64, but currently their size is hardcoded to 8, and DMA addresses are assigned via cast to variable-sized dma_addr_t without any bitwise conversions. Change the type of pbl_virt array to match the actual one, add a new field to store the size of allocated DMA memory and sanitize elements assignment. Misc: give more logic names to the members of qed_chain::pbl_sp embedded struct. Signed-off-by:
-
Alexander Lobakin authored
Zero-initialize chain on qed_chain_free(), so it couldn't be freed twice and provoke undefined behaviour. Signed-off-by:
-
Alexander Lobakin authored
Move chain allocation/freeing functions to a new file to not mix it with hardware-related code. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Alexander Lobakin authored
List one entry per line and sort them alphabetically to simplify the addition of the new ones. Signed-off-by:
-
Alexander Lobakin authored
Reformat structs and macros definitions a bit prior to making functional changes. Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type '__le32 reserved1'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86Tested-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type 'u8 rsvd'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86Tested-by:
-
Gustavo A. R. Silva authored
One-element arrays are being deprecated[1]. Replace the one-element array with a simple value type 'u32 reserved2'[2], once it seems this is just a placeholder for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86Tested-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Colin Ian King authored
Currently when netdev fails to allocate the error return path fails to free the allocated object 'lid'. Fix this by setting err to the return error code and jumping to a new label that performs the kfree of lid before returning. Addresses-Coverity: ("Resource leak") Fixes: 4b03b273 ("ionic: get MTU from lif identity") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
David S. Miller authored
Tom Parkin says: ==================== l2tp: cleanup checkpatch.pl warnings l2tp hasn't been kept up to date with the static analysis checks offered by checkpatch.pl. This series addresses a range of minor issues which don't involve large changes to code structure. The changes include: * tweaks to use of whitespace, comment style, line breaks, and indentation * two minor modifications to code to use a function or macro suggested by checkpatch v1 -> v2 * combine related patches (patches fixing whitespace issues, patches addressing comment style) * respin the single large patchset into a multiple smaller series for easier review ==================== Reviewed-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Tom Parkin authored
checkpatch warned about the L2TP_SKB_CB macro's use of its argument: add braces to avoid the problem. Signed-off-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
-
Tom Parkin authored
In l2tp_core.c both l2tp_tunnel_create and l2tp_session_create take quite a number of arguments and have a correspondingly long prototype. This is both quite difficult to scan visually, and triggers checkpatch warnings. Add a line break to make these function prototypes more readable. Signed-off-by:
-
Tom Parkin authored
checkpatch warns about use of seq_printf where seq_puts would do. Modify l2tp_debugfs accordingly. Signed-off-by:
-
Tom Parkin authored
Use BIT(x) rather than (1<<x), reported by checkpatch.pl. Signed-off-by:
-
Tom Parkin authored
Reported by checkpatch: "WARNING: function definition argument 'struct sock *' should also have an identifier name" Add an identifier name to help document the prototype. Signed-off-by: -
Tom Parkin authored
l2tp_core has conditionally compiled code in l2tp_xmit_skb for IPv6 support. The structure of this code triggered a checkpatch warning due to incorrect indentation. Fix up the indentation to address the checkpatch warning. Signed-off-by:
-
Tom Parkin authored
Arguments should be aligned with the function call open parenthesis as per checkpatch. Tweak some function calls which were not aligned correctly. Signed-off-by:
-
Tom Parkin authored
Some l2tp code had line breaks which made the code more difficult to read. These were originally motivated by the 80-character line width coding guidelines, but were actually a negative from the perspective of trying to follow the code. Remove these linebreaks for clearer code, even if we do exceed 80 characters in width in some places. Signed-off-by:
-
Tom Parkin authored
Modify some l2tp comments to better adhere to kernel coding style, as reported by checkpatch.pl. Add descriptive comments for the l2tp per-net spinlocks to document their use. Fix an incorrect comment in l2tp_recv_common: RFC2661 section 5.4 states that: "The LNS controls enabling and disabling of sequence numbers by sending a data message with or without sequence numbers present at any time during the life of a session." l2tp handles this correctly in l2tp_recv_common, but the comment around the code was incorrect and confusing. Fix up the comment accordingly. Signed-off-by:
-
Tom Parkin authored
Fix up various whitespace issues as reported by checkpatch.pl: * remove spaces around operators where appropriate, * add missing blank lines following declarations, * remove multiple blank lines, or trailing blank lines at the end of functions. Signed-off-by:
-
Parav Pandit authored
Currently devlink instance is searched on all doit() operations. But it is optionally stored into user_ptr[0]. This requires rediscovering devlink again doing post_doit(). Few devlink commands related to port shared buffers needs 3 pointers (devlink, devlink_port, and devlink_sb) while executing doit commands. Though devlink pointer can be derived from the devlink_port during post_doit() operation when doit() callback has acquired devlink instance lock, relying on such scheme to access devlik pointer makes code very fragile. Hence, to avoid ambiguity in post_doit() and to avoid searching devlink instance again, simplify code by always storing devlink instance in user_ptr[0] and derive devlink_sb pointer in their respective callback routines. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Sriram Krishnan authored
Vlan tagged packets are getting dropped when used with DPDK that uses the AF_PACKET interface on a hyperV guest. The packet layer uses the tpacket interface to communicate the vlans information to the upper layers. On Rx path, these drivers can read the vlan info from the tpacket header but on the Tx path, this information is still within the packet frame and requires the paravirtual drivers to push this back into the NDIS header which is then used by the host OS to form the packet. This transition from the packet frame to NDIS header is currently missing hence causing the host OS to drop the all vlan tagged packets sent by the drivers that use AF_PACKET (ETH_P_ALL) such as DPDK. Here is an overview of the changes in the vlan header in the packet path: The RX path (userspace handles everything): 1. RX VLAN packet is stripped by HOST OS and placed in NDIS header 2. Guest Kernel RX hv_netvsc packets and moves VLAN info from NDIS header into kernel SKB 3. Kernel shares packets with user space application with PACKET_MMAP. The SKB VLAN info is copied to tpacket layer and indication set TP_STATUS_VLAN_VALID. 4. The user space application will re-insert the VLAN info into the frame The TX path: 1. The user space application has the VLAN info in the frame. 2. Guest kernel gets packets from the application with PACKET_MMAP. 3. The kernel later sends the frame to the hv_netvsc driver. The only way to send VLANs is when the SKB is setup & the VLAN is stripped from the frame. 4. TX VLAN is re-inserted by HOST OS based on the NDIS header. If it sees a VLAN in the frame the packet is dropped. Cc: xe-linux-external@cisco.com Cc: Sriram Krishnan <srirakr2@cisco.com> Signed-off-by:Sriram Krishnan <srirakr2@cisco.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Paolo Abeni authored
Otherwise the 'chain_len' filed will carry random values, some token creation calls will fail due to excessive chain length, causing unexpected fallback to TCP. Fixes: 2c5ebd00 ("mptcp: refactor token container") Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Colin Ian King authored
The variable current_head_index is being initialized with a value that is never read and it is being updated later with a new value. Replace the initialization of -1 with the latter assignment. Addresses-Coverity: ("Unused value") Signed-off-by: -
Claudiu Manoil authored
enetc_imdio_remove() is missing from the enetc_pf_probe() bailout path. Not surprisingly because enetc_setup_serdes() is registering the imdio bus for internal purposes, and it's not obvious that enetc_imdio_remove() currently performs the teardown of enetc_setup_serdes(). To fix this, define enetc_teardown_serdes() to wrap enetc_imdio_remove() (improve code maintenance) and call it on bailout and remove paths. Fixes: 975d183e ("net: enetc: Initialize SerDes for SGMII and USXGMII protocols") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Wang Hai authored
Remove casting the values returned by memory allocation function. Coccinelle emits WARNING: casting value returned by memory allocation unction to (struct roce_destroy_qp_req_output_params *) is useless. This issue was detected by using the Coccinelle software. Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Vladimir Oltean authored
After the patch below, the iteration through the available MMDs is completely short-circuited, and devs_in_pkg remains set to the initial value of zero. Due to devs_in_pkg being zero, the rest of get_phy_c45_ids() is short-circuited too: the following loop never reaches below this point either (it executes "continue" for every device in package, failing to retrieve PHY ID for any of them): /* Now probe Device Identifiers for each device present. */ for (i = 1; i < num_ids; i++) { if (!(devs_in_pkg & (1 << i))) continue; So c45_ids->device_ids remains populated with zeroes. This causes an Aquantia AQR412 PHY (same as any C45 PHY would, in fact) to be probed by the Generic PHY driver. The issue seems to be a case of submitting partially committed work (and therefore testing something other than was submitted). The intention of the patch was to delay exiting the loop until one more condition is reached (the devs_in_pkg read from hardware is either 0, OR mostly f's). So fix the patch to reflect that. Tested with traffic on a LS1028A-QDS, the PHY is now probed correctly using the Aquantia driver. The devs_in_pkg bit field is set to 0xe000009a, and the MMDs that are present have the following IDs: [ 5.600772] libphy: get_phy_c45_ids: device_ids[1]=0x3a1b662 [ 5.618781] libphy: get_phy_c45_ids: device_ids[3]=0x3a1b662 [ 5.630797] libphy: get_phy_c45_ids: device_ids[4]=0x3a1b662 [ 5.654535] libphy: get_phy_c45_ids: device_ids[7]=0x3a1b662 [ 5.791723] libphy: get_phy_c45_ids: device_ids[29]=0x3a1b662 [ 5.804050] libphy: get_phy_c45_ids: device_ids[30]=0x3a1b662 [ 5.816375] libphy: get_phy_c45_ids: device_ids[31]=0x0 [ 7.690237] mscc_felix 0000:00:00.5: PHY [0.5:00] driver [Aquantia AQR412] (irq=POLL) [ 7.704739] mscc_felix 0000:00:00.5: PHY [0.5:01] driver [Aquantia AQR412] (irq=POLL) [ 7.718918] mscc_felix 0000:00:00.5: PHY [0.5:02] driver [Aquantia AQR412] (irq=POLL) [ 7.733044] mscc_felix 0000:00:00.5: PHY [0.5:03] driver [Aquantia AQR412] (irq=POLL) Fixes: bba238ed ("net: phy: continue searching for C45 MMDs even if first returned ffff:ffff") Reported-by:Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Richard Sailer authored
This adds support for the SIOCOUTQ IOCTL to get the send buffer fill of a DCCP socket, like UDP and TCP sockets already have. Regarding the used data field: DCCP uses per packet sequence numbers, not per byte, so sequence numbers can't be used like in TCP. sk_wmem_queued is not used by DCCP and always 0, even in test on highly congested paths. Therefore this uses sk_wmem_alloc like in UDP. Signed-off-by:
Richard Sailer <richard_siegfried@systemli.org> Signed-off-by:
-
- 22 Jul, 2020 5 commits
-
-
David S. Miller authored
Kurt Kanzenbach says: ==================== Add DSA yaml binding as discussed [1] [2] it makes sense to add a DSA yaml binding. This is the second version and contains now two ways of specifying the switch ports: Either by "ports" or by "ethernet-ports". That is why the third patch also adjusts the DSA core for it. Tested in combination with the hellcreek.yaml file. Changes since v1: * Use select to not match unrelated switches * Allow ethernet-port(s) * List ethernet-controller properties * Include better description * Let dsa.txt refer to dsa.yaml Thanks, Kurt [1] - https://lkml.kernel.org/netdev/449f0a03-a91d-ae82-b31f-59dfd1457ec5@gmail.com/ [2] - https://lkml.kernel.org/netdev/20200710090618.28945-1-kurt@linutronix.de/ ==================== Signed-off-by:
-
Kurt Kanzenbach authored
Due to unified Ethernet Switch Device Tree Bindings allow for ethernet-ports as encapsulating node as well. Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
-
Kurt Kanzenbach authored
The DSA bindings have been converted to YAML. Therefore, the old text style documentation should refer to that one. The text file can be removed completely once all the existing DSA switch bindings have been converted as well. Signed-off-by:
-
Kurt Kanzenbach authored
For future DSA drivers it makes sense to add a generic DSA yaml binding which can be used then. This was created using the properties from dsa.txt. It includes the ports and the dsa,member property. Suggested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The VSC7514 is marketed as a 10-port switch, however it has 11 physical ports (0->10) in the block diagram: https://www.microsemi.com/product-directory/ethernet-switches/3992-vsc7514 (also in the device tree at arch/mips/boot/dts/mscc/ocelot.dtsi) Additionally, by architecture it has one more entry in the analyzer block, situated right after the physical ports, for the CPU port module. This is not a physical port, it only represents a channel for frame injection and extraction. That entry for the CPU port is at index 11 in the analyzer. When the register groups for QSYS_SWITCH_PORT_MODE, SYS_PORT_MODE and SYS_PAUSE_CFG are declared to be replicated 11 times, the 11th entry in the array of regfields is not initialized, so the CPU port module is not initialized either. The documentation of QSYS_SWITCH_PORT_MODE for VSC7514 also says that this register group is replicated 12 times, so this patch is simply reflecting that and not introducing any further inconsistency. Fixes: 886e1387 ("net: mscc: ocelot: convert QSYS_SWITCH_PORT_MODE and SYS_PORT_MODE to regfields") Fixes: 541132f0 ("net: mscc: ocelot: convert SYS_PAUSE_CFG register access to regfield") Reported-by:
Bryan Whitehead <bryan.whitehead@microchip.com> Signed-off-by:
-
