This patch avoids that sparse complains about lock imbalances.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Since we removed cmd_type, we now have a hole in the struct. Move
the internal_tag member to the same cacheline as tag, since we
use them at the same time.

This doesn't fix the hole, just moves it elsewhere.
Signed-off-by: Jens Axboe <axboe@fb.com>

Instead of keeping two levels of indirection for requests types, fold it
all into the operations.  The little caveat here is that previously
cmd_type only applied to struct request, while the request and bio op
fields were set to plain REQ_OP_READ/WRITE even for passthrough
operations.

Instead this patch adds new REQ_OP_* for SCSI passthrough and driver
private requests, althought it has to add two for each so that we
can communicate the data in/out nature of the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Currently the legacy ide driver defines several request types of it's own,
which is in the way of removing that field entirely.

Instead add a type field to struct ide_request and use that to distinguish
the different types of IDE-internal requests.

It's a bit of a mess, but so is the surrounding code..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@fb.com>

This can be used to check for fs vs non-fs requests and basically
removes all knowledge of BLOCK_PC specific from the block layer,
as well as preparing for removing the cmd_type field in struct request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

This is where we do the rest of the request handling, which will
become much simpler soon, too.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Disconnects don't use block layer requests these days, so all handling
of private requests is dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

This driver will never see non-fs requests, and doesn't do anything
else in the prep_fn.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

This driver will never see non-fs requests, and doesn't do anything
else in the prep_fn.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

The block layer won't send requests the driver isn't asking for,
so remove this check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

->done can only be called for fs requests, so no need to check again here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

The SCSI passthrough idea was a a bad idea to start with (guess who came
up with it?), and has been removed from the virtio 1.O spec, and is not
enabled by defauly by any host I know of.  Add a separate config option
for it so that we don't need to enable it for most setups.  That way
any bugs related to it (like the one recently fixed for vmapped stacks)
do not affect other users, and the size of the virtblk_req structure
also shrinks significantly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

We can simply use blk_mq_rq_from_pdu to get back at the request at
I/O completion time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

We only need this code to support scsi, ide, cciss and virtio.  And at
least for virtio it's a deprecated feature to start with.

This should shrink the kernel size for embedded device that only use,
say eMMC a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

This way there is no need to drag in a dependency on the
BLOCK_PC code, which is going to become optional.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

The NVMe SCSI emulation doesn't use BLOCK_PC requests, so BLK_MAX_CDB
doesn't have a meaning for it.  Instead opencode the value of 16
and refactor the code a bit so that related checks are next to each
other and we only need to use the value in one place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Since we moved the cdb parts and define out of the block proper,
we need to include scsi/scsi_request.h for the nvme scsi layer.

Fixes: 82ed4db4 ("block: split scsi_request out of struct request")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>

These days we have the proper flags set since request allocation time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

And require all drivers that want to support BLOCK_PC to allocate it
as the first thing of their private data.  To support this the legacy
IDE and BSG code is switched to set cmd_size on their queues to let
the block layer allocate the additional space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Simply the boilerplate code needed for bsg nodes a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Rely on the new block layer functionality to allocate additional driver
specific data behind struct request instead of implementing it in SCSI
itѕelf.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Instead do an internal export of __scsi_init_queue for the transport
classes that export BSG nodes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

There is no need for GFP_DMA allocations of the scsi_cmnd structures
themselves, all that might be DMAed to or from is the actual payload,
or the sense buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Currently blk-mq always allocates the sense buffer using normal GFP_KERNEL
allocation.  Refactor the cmd pool code to split the cmd and sense allocation
and share the code to allocate the sense buffers as well as the sense buffer
slab caches between the legacy and blk-mq path.

Note that this switches to lazy allocation of the sense slab caches - the
slab caches (not the actual allocations) won't be destroy until the scsi
module is unloaded instead of keeping track of hosts using them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

When using the slab allocator we already decide at cache creation time if
an allocation comes from a GFP_DMA pool using the SLAB_CACHE_DMA flag,
and there is no point passing the kmalloc-family only GFP_DMA flag to
kmem_cache_alloc.  Drop all the infrastructure for doing so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Switch to scsi_execute_req_flags() instead of using the block interface
directly.  This will set REQ_QUIET and REQ_PREEMPT, but this is okay as
we're evaluating the errors anyway and should be able to send the command
even if the device is quiesced.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Switch to scsi_execute_req_flags() and scsi_get_vpd_page() instead of
open-coding it.  Using scsi_execute_req_flags() will set REQ_QUIET and
REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and
should be able to send the command even if the device is quiesced.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Switch to scsi_execute_req_flags() and scsi_get_vpd_page() instead of
open-coding it.  Using scsi_execute_req_flags() will set REQ_QUIET and
REQ_PREEMPT, but this is okay as we're evaluating the errors anyway and
should be able to send the command even if the device is quiesced.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

DM already calls blk_mq_alloc_request on the request_queue of the
underlying device if it is a blk-mq device.  But now that we allow drivers
to allocate additional data and initialize it ahead of time we need to do
the same for all drivers.   Doing so and using the new cmd_size
infrastructure in the block layer greatly simplifies the dm-rq and mpath
code, and should also make arbitrary combinations of SQ and MQ devices
with SQ or MQ device mapper tables easily possible as a further step.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

DM tries to copy a few fields around for BLOCK_PC requests, but given
that no dm-target ever wires up scsi_cmd_ioctl BLOCK_PC can't actually
be sent to dm.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

A couple tweaks to the tracing code:

 - trace the request size for all requests
 - trace request sector and nr_sectors only for fs requests, enforced by
   helpers
 - drop SCSI CDB tracing - we have SCSI tracing for this and are going
   to me the CDB out of the generic struct request soon.

With this the tracing code stops to know about BLOCK_PC requests entirely,
it's just FS vs passthrough requests now, where the latter includes any
driver-private requests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

This mirrors the blk-mq capabilities to allocate extra drivers-specific
data behind struct request by setting a cmd_size field, as well as having
a constructor / destructor for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Return an errno value instead of the passed in queue so that the callers
don't have to keep track of two queues, and move the assignment of the
request_fn and lock to the caller as passing them as argument doesn't
simplify anything.  While we're at it also remove two pointless NULL
assignments, given that the request structure is zeroed on allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We can't initalize the elevator fields for flushes as flush share space
in struct request with the elevator data.  But currently we can't
communicate that a request is a flush through blk_get_request as we
can only pass READ or WRITE, and the low-level code looks at the
possible NULL bio to check for a flush.

Fix this by allowing to pass any block op and flags, and by checking for
the flush flags in __get_request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

No need for the local variables, the bio is still live and we can just
assign the bits we want directly.  Make me wonder why we can't assign
all the bio flags to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Jens Axboe <axboe@fb.com>

This fixes a couple of problems:

1. In the !CONFIG_DEBUG_FS case, the stub definitions were bogus.
2. In the !CONFIG_BLOCK case, blk-mq-debugfs.c shouldn't be compiled at
   all.

Fix the stub definitions and add a CONFIG_BLK_DEBUG_FS Kconfig option.

Fixes: 07e4fead ("blk-mq: create debugfs directory tree")
Signed-off-by: Omar Sandoval <osandov@fb.com>

Augment Kconfig description.
Signed-off-by: Jens Axboe <axboe@fb.com>

Use op_is_flush() where applicable.
Signed-off-by: Jens Axboe <axboe@fb.com>

Instead of letting the caller check this and handle the details
of inserting a flush request, put the logic in the scheduler
insertion function. This fixes direct flush insertion outside
of the usual make_request_fn calls, like from dm via
blk_insert_cloned_request().
Signed-off-by: Jens Axboe <axboe@fb.com>