Merge tag 'uniphier-dt-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

Pull "UniPhier ARM SoC DT updates for v4.17" from Masahiro Yamada:

- add sound support
- add ethernet support
- use proper SPDX-License-Identifier style

* tag 'uniphier-dt-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add sound node for PXs2
  arm64: dts: uniphier: use proper SPDX-License-Identifier style
  ARM: dts: uniphier: use proper SPDX-License-Identifier style
  arm64: dts: uniphier: add fixed regulators for audio codec
  arm64: dts: uniphier: add AVE ethernet node
  ARM: dts: uniphier: add AVE ethernet node
  arm64: dts: uniphier: add compress audio out for LD11/LD20
  arm64: dts: uniphier: add speaker out for LD11/LD20 boards
  arm64: dts: uniphier: add sound node
  ARM: dts: uniphier: add audio in/out pin-mux node

Merge tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt

Pull "ASPEED device tree updates for 4.17" from Joel Stanley:

Updates to OpenPower BMC systems:

 A number of updates to use recently merged drivers, including moving to
 upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding
 simple-reset for UARTs.

 This includes more of Palmetto's device tree, so that it's ever so
 close to booting the host with an upstream kernel.

New machines:

 Add Qualcomm Centriq ARM64 server reference platform, which will run
 OpenBMC on an AST2500.

* tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Add Qualcomm Centriq 2400 REP BMC
  ARM: dts: aspeed: romulus: Add w83773g temp sensor
  ARM: dts: aspeed: romulus: hog GPIOS7
  ARM: dts: romulus: Remove MAX31785 device
  ARM: dts: palmetto: Request mux as per strapping configuration
  ARM: dts: palmetto: Enable rear UART
  ARM: dts: aspeed: Add LPC reset controller node
  ARM: dts: aspeed: Add Palmetto GPIO hogs
  ARM: dts: palmetto: Add LEDs and GPIO keys
  ARM: dts: aspeed: Add LPC clock phandles
  ARM: dts: aspeed-g5: Update LPC node
  ARM: dts: aspeed: Enable IPMI BT node on OpenPower machines
  ARM: dts: aspeed: Add IPMI BT node

This patch adds audio controller, external codec and simple card node
of UniPhier AIO sound system for PXs2 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

According to Documentation/process/license-rules.rst, move the SPDX
License Identifier to the very top of the file.  I used C++ comment
style not only for the SPDX line but for the entire block because
this seems Linus' preference [1].  I also dropped the parentheses to
follow the examples in that document.

[1] https://lkml.org/lkml/2017/11/25/133Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

According to Documentation/process/license-rules.rst, move the SPDX
License Identifier to the very top of the file.  I used C++ comment
style not only for the SPDX line but for the entire block because
this seems Linus' preference [1].  I also dropped the parentheses to
follow the examples in that document.

[1] https://lkml.org/lkml/2017/11/25/133Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds regulators that have fixed voltage for audio codec
on UniPhier LD11/20 Global boards. This patch fixes warnings about
TAS57xx audio codec such as "tas571x 0-001b: 0-001b supply AVDD
not found, using dummy regulator".
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add nodes of the AVE ethernet controller for LD11 and LD20 SoCs
and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add nodes of the AVE ethernet controller for Pro4, PXs2, LD6b SoCs
and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds compress audio node for S/PDIF on UniPhier LD11/20
global boards. And adds settings of AIO for it.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds codec node for TI TAS571x on UniPhier LD11/20
global boards. And adds settings of AIO for speaker out.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds audio controller, codec and simple card node of
UniPhier AIO sound system for LD11/20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The UniPhier AIO audio system needs I2S data in/out lines
and clock signal pins to connect external codec chip.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The Qualcomm Centriq 2400 REP (Reference Evaluation Platform) is
an aarch64 Armv8 server platform with an ast2520 BMC.
Signed-off-by: Ken Chen <chen.kenyy@inventec.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Signed-off-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

GPIOS7 shall be pulled low for CPLD to continue the power up sequence.
With this hogged as pull-low, the CPLD workaround can be removed in
OpenBMC.
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Romulus uses ASPEED's fan tach instead of max31785:

     * Pass1's max31785 is always reset by CPLD
     * Pass2's max31785 is not connected
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Pull "Broadcom devicetree changes for 4.17" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs devicetree changes
for 4.17, please pull the following:

- Henry fixes the pin functions for the JTAG pins, nothing uses this for
  now, but it could be backported eventually if deemed appropriate

- Stefan fixes the register ranges for the bcm2835-i2s nodes in the
  binding document definition, he then fixes the probing of the
  bcm2835-i2s driver by providing an appropriate register range and a
  missing clock. Stefan also makes sure that the appropriate pull
  settings are applied to the pins used on the Raspberry Pi Zero
  Wireless, he then adds the necessary UART node to connected to the
  BCM43438 Bluetooth adapter on the Pi Zero W. He finally enables USB
  OTG mode on the Pi Zero W since he became usable again

- Baruch adds the necessary Device Tree nodes to support the Raspberry
  Pi GPIO expander which is controlled via the VC4 firmware

- Hiroshi adds the missing LEDs on the Buffalo WZR-900DHP router

- Eric adds the DPI hardware block into the BCM283x Device Tree include
  file for future use when an actual panel is available

- Florian updates the Northstar Plus platforms to use port 8 of the
  internal switch as the CPU/management port since necessary code was
  added in the b53 switch driver to support that

* tag 'arm-soc/for-4.17/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: NSP: Switch to port 8 for CPU port
  ARM: bcm2835: Add the DPI hardware to the device tree.
  ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
  ARM: dts: bcm2835-rpi-zero-w: Enable OTG mode
  ARM: dts: bcm2835-rpi-zero-w: Add bcm43438 serial slave
  ARM: dts: bcm283x: Apply pull settings to Zero W relevant groups
  ARM: dts: bcm2837-rpi-3-b: add GPIO expander
  ARM: dts: bcm2835: make the firmware node into a bus
  ARM: dts: bcm283x: Fix probing of bcm2835-i2s
  dt-bindings: bcm283x: Fix register ranges of bcm2835-i2s
  ARM: dts: bcm283x: Fix pin function of JTAG pins

This pull request brings in one last patch to add the BCM2835 DPI
controller to the device tree.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Now that we have added support for pre-pended Broadcom tags with commit
11606039 ("net: dsa: b53: Support prepended Broadcom tags") we can
switch all the Northstar Plus reference boards to use port 8 for the CPU
port. This allows us to prepare room for supporting the Flow Accelerator
2 NAPT offload, and frees up port 5 to be made fully configurable for
the modes that it supports: internal, SGMII, RGMII etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

It's currently marked disabled, as it's not useful without a panel
associated with it and the GPIO pins routed to ALT2.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>

Add emif node for keystone2 devices, which is used for ECC support.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
[t-kristo@ti.com: made emif enabled by default for all keystone2 devices]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add a watchdog node for keystone-k2g, with the corresponding clock and
power domain handles.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Pull "AT91 DT for 4.17" from Alexandre Belloni:

Not much this cycle, mainly changes on the Axentia boards from Peter and
a cleanup from Bartosz:

 - use 'atmel' as at24 manufacturer
 - device addition and fixes for axentia boards
 - fix sama5d4 pinctrl compatible

* tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9263ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91-sama5d2_ptc_ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9g20ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9260ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for sama5d34ek
  ARM: dts: at91: sama5d4: fix pinctrl compatible string
  ARM: dts: at91: tse850: make the sound dai cell count explicit
  ARM: dts: at91: nattis: add lvds-encoder
  ARM: dts: at91: nattis: use up-to-date mtd partitions
  ARM: dts: at91: tse850: use the correct compatible for the eeprom
  ARM: dts: at91: nattis: use the correct compatible for the eeprom
  ARM: dts: at91: sam9rl: Properly assign copyright

Pull "mvebu dt64 for 4.17 (part 1)" from Gregory CLEMENT:

- convert to the SPDX-License-Identifier
- add missing clocks (for the registers) on some of the peripherals
- use the new nand driver
- add more uart for Armada 7K/8K SoCs

* tag 'mvebu-dt64-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes
  arm64: dts: marvell: use reworked NAND controller driver on Armada 8K
  arm64: dts: marvell: use reworked NAND controller driver on Armada 7K
  ARM64: dts: marvell: armada-cp110: Add registers clock for sata node
  arm64: dts: marvell: armada-8080-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-8040-mcbin: use SPDX-License-Identifier
  arm64: dts: marvell: armada-8040-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-7040-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-3720-espressobin: use SPDX-License-Identifier
  arm64: dts: marvell: armada-3720-db: use SPDX-License-Identifier
  arm64: dts: marvell: use SPDX-License-Identifier for Armada SoCs
  arm64: dts: marvell: mcbin: fix board name typo
  arm64: dts: marvell: mcbin: enable uart headers
  arm64: dts: marvell: add CP110 uart peripherals
  ARM64: dts: marvell: armada-cp110: Add registers clock for I2C nodes
  ARM64: dts: marvell: armada-cp110: Add registers clock for SPI nodes

Pull "mvebu dt for 4.17 (part 1)" from Gregory CLEMENT:

Most of them are small fixes or cleanup.

Only the change on the clearfog will have a noticeable effect allowing
to use the i2c at an higher frequency.

* tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz
  arm: dts: kirkwood: fix error in #sound-dai-cells size
  ARM: dts: kirkwood: Fix "debounce-interval" property misspelling
  ARM: dts: armada: netgear-rn*: fix rtc node name

Pull "ARM64: DT: Hisilicon SoC DT updates for 4.17" from Wei Xu:

- Add XGE CPLD control support for hip07 SoC
- Disable the SMMU on hip06 and hip07 SoCs becuase of
  the hardware limitation
- Enable HS200 mode for the MMC controller on hi6220 hikey board
- Remove "cooling-{min|max}-level" this kind unused properties
  for hi6220 SoC
- Add watchdog node for hi6220 SoC
- Remove "CPU_NAP" idle state on hikey960 board since it is
  not stable and useless with the updated firmware

* tag 'hisi-arm64-dt-for-4.17' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Hi3660: Remove 'CPU_NAP' idle state
  arm64: dts: hi6220: enable watchdog
  ARM64: dts: hi6220: Remove "cooling-{min|max}-level" for CPU nodes
  arm64: dts: hikey: Enable HS200 mode on eMMC
  arm64: dts: hisi: Disable hisilicon smmu node on hip06/hip07
  arm64: dts: hisi: add hns-dsaf cpld control for the hip07 SoC

Pull "arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17" from Michal Simek:

- Use SPDX license identifier
- Add Xilinx ZynqMP boards
  zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA,
  zcu111-revA, zc1751 dc1/dc2/dc3/dc4
- Add Xilinx Zynq boards
  cc108, zc770 dc1/dc2/dc3/dc4
- Add Digilent Zybo Z7
- Minor fixes in current DTSes

* tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx: (22 commits)
  arm: dts: zynq: Add Digilent Zybo Z7 board
  arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
  arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
  arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
  arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
  arm: zynq: Add Xilinx cc108 board
  arm: zynq: Add missing address node name in microzed board
  arm: dts: zynq: Use SPDX-License-Identifier
  arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
  arm64: zynqmp: Add support for Xilinx zc1751
  arm64: zynqmp: Add support for Xilinx zc12XX boards
  arm64: zynqmp: Add support for Xilinx zcu111-revA
  arm64: zynqmp: Add support for Xilinx zcu106-revA
  arm64: zynqmp: Add support for Xilinx zcu104-revA
  arm64: zynqmp: Add support for Xilinx zcu102
  arm64: zynqmp: Add support for Xilinx zcu100-revC
  dt-bindings: xilinx: Add description for ZynqMP
  arm64: zynqmp: Add 8-bit bus width property for ep108
  arm64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts
  arm64: zynqmp: Add SPDX license identifier
  ...

Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
dts and cannot configure these LEDs.
I Added missing LED definitions for WZR-900DHP.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This extra clock is needed to access the registers of the UARTs used on
CP110 component of the Armada 7K/8K SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

This add a DTS for the Digilent Zybo Z7 board.
This board is the successor board of Zybo, these are almost the same except
for ps-clk-frequency specifications.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, ethernet, i2c, qspi, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, 2x i2c, nor flash, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, i2c, nand uart, spi and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

This patch is fixing issue reported by dtc:
arch/arm/boot/dts/zynq-microzed.dtb: Warning (unit_address_vs_reg): Node
/memory has a reg or ranges property, but no unit name
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Follow trend and use the SPDX License description.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

i2c muxes should described like this.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Xilinx zc1751 boards is used for silicon validation. Board can be
extended with 5 FMCs/DCs cards to connect various IPs. Describe all
these combinations.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

These 3 boards requires minimal support to get Linux up and running.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>