- 02 Feb, 2015 40 commits
-
-
Antti Palosaari authored
Change legacy DVBv3 read BER to return values calculated by DVBv5 statistics. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Change legacy DVBv3 signal strength to return values calculated by DVBv5 statistics. Signed-off-by:
-
Antti Palosaari authored
DVBv5 BER. Signed-off-by:
-
Antti Palosaari authored
Estimate signal strength from IF AGC. Signed-off-by:
-
Antti Palosaari authored
DVBv5 CNR. Signed-off-by:
-
Antti Palosaari authored
Trivial changes proposed by checkpatch.pl and some more. Signed-off-by:
-
Antti Palosaari authored
Remove internal config and use configuration values directly from the platform data. Signed-off-by:
-
Antti Palosaari authored
Pass correct device for dev_foo() logging in order to print logs correctly. Signed-off-by:
-
Antti Palosaari authored
As a I2C driver struct i2c_client is top level structure representing the driver. Use it as parameter to carry all needed information for each function in order to simplify things. Signed-off-by:
-
Antti Palosaari authored
Use name 'dev' for device state instance as it is more common and also one letter shorter. Signed-off-by:
-
Antti Palosaari authored
Remove legacy DVB binding as all users are using I2C binding. Signed-off-by:
-
Antti Palosaari authored
rtl2830 driver supports now I2C model too. Start using it. Signed-off-by:
-
Antti Palosaari authored
Convert driver to kernel I2C model. Old DVB proprietary model is still left there also. Signed-off-by:
-
Antti Palosaari authored
Top level pointer on USB probe is struct usb_interface *. Add that pointer to struct dvb_usb_device that drivers could use it, for dev_* logging and more. Signed-off-by:
-
Nibble Max authored
Although IRQ_HANDLED is "safe" value to return, it is better to let the kernel know whether the driver handle the interrupt or not. Signed-off-by:
Nibble Max <nibble.max@gmail.com> Signed-off-by:
-
Fengguang Wu authored
drivers/media/platform/am437x/am437x-vpfe.c:2767:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Benoit Parrot <bparrot@ti.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Arnd Bergmann authored
The mmp ccic driver expects a platform_data structure that does not exist in the mainline kernel and presumably was changed in a kernel fork, which leads to build errors now: media/platform/marvell-ccic/mmp-driver.c: In function 'mmpcam_calc_dphy': media/platform/marvell-ccic/mmp-driver.c:252:15: error: 'struct mmp_camera_platform_data' has no member named 'dphy3_algo' switch (pdata->dphy3_algo) { ^ media/platform/marvell-ccic/mmp-driver.c:253:7: error: 'DPHY3_ALGO_PXA910' undeclared (first use in this function) case DPHY3_ALGO_PXA910: ^ media/platform/marvell-ccic/mmp-driver.c:253:7: note: each undeclared identifier is reported only once for each function it appears in media/platform/marvell-ccic/mmp-driver.c:257:8: error: 'struct mmp_camera_platform_data' has no member named 'dphy' This marks the driver as 'BROKEN' but keeps the code around. Alternatively it could be removed entirely. Fixes: 05fed816 ("[media] marvell-ccic: add MIPI support for marvell-ccic driver") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
Jonathan Corbet <corbet@lwn.net> Cc: Libin Yang <lbyang@marvell.com> Signed-off-by:
-
Markus Elfring authored
[media] staging: bcm2048: Delete an unnecessary check before the function call "video_unregister_device" The video_unregister_device() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Prabhakar Lad authored
1: Simplify the vpe mem-to-mem driver by using the m2m ioctl and vb2 helpers. 2: Align and arranged the v4l2_ioctl_ops. 3: Fixes a typo. 4: Use of_match_ptr() instead of explicitly defining the macro to NULL in case CONFIG_OF is not defined. Signed-off-by:
-
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: m.chehab@samsung.com As shown at the code, upd_demod_gain_period is used to write to two 16-bit registers: dib8000_write_word(state, 1946, upd_demod_gain_period & 0xFFFF); dib8000_write_word(state, 1947, reg | (1<<14) | ((upd_demod_gain_period >> 16) & 0xFF)); So, it should be declared as u32. This fixes the following smatch warning: drivers/media/dvb-frontends/dib8000.c:1282 dib8000_agc_startup() warn: right shifting more than type allows Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/cx23885/cx23885-dvb.c:2080 dvb_register() Function too hairy. Giving up. This is indeed a too complex function, with lots of stuff inside. Breaking this into two functions makes it a little bit less hairy. Signed-off-by: -
Shuah Khan authored
Convert au0828 to use videobuf2. Tested with NTSC. Tested video and vbi devices with xawtv, tvtime, and vlc. Ran v4l2-compliance to ensure there are no failures. Video compliance test results summary: Total: 75, Succeeded: 75, Failed: 0, Warnings: 18 Vbi compliance test results summary: Total: 75, Succeeded: 75, Failed: 0, Warnings: 0 Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by:
-
Shuah Khan authored
au0828 picked up UNSET from videobuf-core.h and fails to compile if videobuf-core.h isn't included. Change it to use -1U instead to fix the problem. drivers/media/usb/au0828/au0828-cards.c:47:17: error: ‘UNSET’ undeclared here (not in a function) .tuner_type = UNSET, Signed-off-by: -
Shuah Khan authored
au0828_analog_register() frees au0828_dev when it fails to locate isoc endpoint. au0828_usb_probe() continues with dvb and rc probe and registration assuming dev is still valid. When au0828_analog_register() fails to locate isoc endpoint, it should return without free'ing au0828_dev. Otherwise, the probe will fail as dev is null when au0828_dvb_register() is called. Signed-off-by:
-
Lars-Peter Clausen authored
Add myself as the maintainer for the adv7180 video subdev driver. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Federico Vaga <federico.vaga@gmail.com> Acked-by:
-
Lars-Peter Clausen authored
In fast switch mode the adv7180 (and similar) can lock onto a new signal faster when switching between different inputs. As a downside though it is no longer able to auto-detect the incoming format. The fast switch mode is exposed as a boolean v4l control that allows userspace applications to either enable or disable fast switch mode. Signed-off-by:
-
Lars-Peter Clausen authored
Some of the devices supported by this driver have a interlaced-to- progressive converter which can optionally be enabled. This patch adds support for enabling and disabling the I2P converter on such devices. I2P mode can be enabled by selecting V4L2_FIELD_NONE instead of V4L2_FIELD_INTERLACED for the format. Signed-off-by:
-
Lars-Peter Clausen authored
This patch adds support for the adv7280-m/adv2781-m/adv7281-ma/adv7282-m devices to the adv7180 driver. They are very similar to the adv7280/adv7281/adv7282 but instead of parallel video out they feature a MIPI CSI2 transmitter. The CSI2 transmitter is configured via a separate I2C address, so we need to register a dummy device for it. Signed-off-by:
-
Lars-Peter Clausen authored
This patch adds support for the adv7280/adv7281/adv7282 devices to the adv7180 driver. They are very similar to the adv7182, the main difference from the drivers point of view are some different tuning constants for improved video performance. Signed-off-by:
-
Lars-Peter Clausen authored
This patch adds support for the adv7182 to the adv7180 driver. The adv7182 is similar to the adv7180, the main difference from the driver's point of view is how the video input and how the input format are selected. Signed-off-by:
-
Lars-Peter Clausen authored
The adv7180 is part of a larger family of device, which have all a very similar register map layout. This patch prepares the adv7180 driver for support for multiple different devices. For now the only difference we care about is the number of input channel configurations. Also the way the input format is configured slightly differs between some devices. Signed-off-by:
-
Lars-Peter Clausen authored
We have basically the same code to set the video standard in init_device() and adv7180_s_std(). Factor this out into a common helper function. Signed-off-by:
-
Lars-Peter Clausen authored
Add media controller support to the adv7180 driver by registering a media entity instance for it as well as implementing pad ops for configuring the format. As there currently don't seem to be any users of the video ops format operations those are removed as well in this patch. Also set the V4L2_SUBDEV_FL_HAS_DEVNODE flag for the subdevice so it is possible to create a subdevice device node. Since the driver now depends on VIDEO_V4L2_SUBDEV_API all drivers which select the driver need to depend on that symbol as well. Signed-off-by:
-
Lars-Peter Clausen authored
Reset the device when initializing it so it is in a good known state and the assumed register settings matches the actual register settings. Signed-off-by:
-
Lars-Peter Clausen authored
The ad7180 has multiple register pages which can be switched between by writing to a register. Currently the driver manually switches between pages whenever a register outside of the default register map is accessed and switches back after it has been accessed. This is a bit tedious and also potential source for bugs. This patch adds two helper functions that take care of switching between pages and reading/writing the register. The register numbers for registers are updated to encode both the page (in the upper 8-bits) and the register (in the lower 8-bits) numbers. Having multiple pages means that a register access is not a single atomic i2c_smbus_write_byte_data() or i2c_smbus_read_byte_data() call and we need to make sure that concurrent register access does not race against each other. Signed-off-by:
-
Lars-Peter Clausen authored
Consistently prefix register defines with ADV7180_REG. Also remove the "ADI" from register names, the ADV7180 prefix should provide enough of a namespace separation. Signed-off-by:
-
Lars-Peter Clausen authored
Most IRQ controllers support different types of interrupts. The adv7180 generates falling edge interrupts, so make sure to pass IRQF_TRIGGER_FALLING to request_threaded_irq() so the IRQ controller is configured for the correct mode. Signed-off-by:
-
Lars-Peter Clausen authored
Currently the IRQ is requested from within the init_device() function. This function is not only called during device probe, but also during resume causing the driver to try to request the IRQ again. Move requesting the IRQ from init_device() to the probe function to make sure that it is only requested once. Signed-off-by:
-
Arnd Bergmann authored
The davinci media drivers use videobuf2, which they enable through a 'select' statement. If one of these drivers is built-in, but the v4l2 core is a loadable modules, we end up with a link error: drivers/built-in.o: In function `vb2_fop_mmap': :(.text+0x113e84): undefined reference to `video_devdata' drivers/built-in.o: In function `vb2_ioctl_create_bufs': :(.text+0x114710): undefined reference to `video_devdata' drivers/built-in.o: In function `vb2_ioctl_reqbufs': :(.text+0x114ed8): undefined reference to `video_devdata' drivers/built-in.o: In function `vb2_ioctl_querybuf': :(.text+0x115530): undefined reference to `video_devdata' To solve this, we need to add a dependency on VIDEO_V4L2, which enforces that the davinci drivers themselves can only be loadable modules if V4L2 is not built-in, and they do not cause the videobuf2 code to be built-in. Signed-off-by:
-
Hans Verkuil authored
Keep the colorspace and encoding names consistent with what is used elsewhere (primarily the utilities in v4l-utils.git). Signed-off-by:
-
