- 02 Sep, 2011 2 commits
-
-
Manuel Lauss authored
it's annoying and takes up way too much space in dmesg. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Anatolij Gustschin authored
Increase delay when polling for tx status. This fixes the unreliable video decoder i2c register access. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 01 Sep, 2011 3 commits
-
-
Tomi Valkeinen authored
The standard timings parses uses 1:1 dimensions when the ratio in the EDID data is 0. However, for EDID 1.3 and later the dimensions are 16:10 when the ratio is 0. Pass the version and revision numbers to get_std_timing() which can then make the right decision about dimensions. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Axel Lin authored
Since commit aa3831cf "ARM: Consolidate the clkdev header files", the header file arch/arm/mach-nuc93x/include/mach/clkdev.h is removed. This patch fixes below build error: drivers/video/nuc900fb.c:42:25: error: mach/clkdev.h: No such file or directory make[2]: *** [drivers/video/nuc900fb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Axel Lin authored
Include linux/module.h to fix below build error: from drivers/video/mxsfb.c:42: arch/arm/mach-mxs/include/mach/memory.h:22:1: warning: this is the location of the previous definition drivers/video/mxsfb.c:574: error: 'THIS_MODULE' undeclared here (not in a function) drivers/video/mxsfb.c:893: warning: data definition has no type or storage class drivers/video/mxsfb.c:893: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/video/mxsfb.c:893: warning: parameter names (without types) in function declaration drivers/video/mxsfb.c:917: error: expected declaration specifiers or '...' before string constant drivers/video/mxsfb.c:917: warning: data definition has no type or storage class drivers/video/mxsfb.c:917: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/video/mxsfb.c:917: warning: function declaration isn't a prototype drivers/video/mxsfb.c:918: error: expected declaration specifiers or '...' before string constant drivers/video/mxsfb.c:918: warning: data definition has no type or storage class drivers/video/mxsfb.c:918: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/video/mxsfb.c:918: warning: function declaration isn't a prototype drivers/video/mxsfb.c:919: error: expected declaration specifiers or '...' before string constant drivers/video/mxsfb.c:919: warning: data definition has no type or storage class drivers/video/mxsfb.c:919: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/video/mxsfb.c:919: warning: function declaration isn't a prototype make[2]: *** [drivers/video/mxsfb.o] Error 1 make[1]: *** [drivers/video] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 30 Aug, 2011 1 commit
-
-
- 29 Aug, 2011 1 commit
-
-
Florian Tobias Schandinat authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x into fbdev-next Conflicts: drivers/video/atmel_lcdfb.c
-
- 24 Aug, 2011 8 commits
-
-
Jingoo Han authored
This patch adds struct s3c_fb_driverdata s3c_fb_data_exynos4 for EXYNOS4 and adds lcd clock gating support. FIMD driver needs two clocks for FIMD IP and LCD pixel clock. Previously, both clocks are provided by using bus clock such as HCLK. However, EXYNOS4 can not select HCLK for LCD pixel clock because the EXYNOS4 FIMD IP does not have the CLKSEL bit of VIDCON0. So, FIMD driver should provide the lcd clock using SCLK_FIMD as LCD pixel clock for EXYNOS4. The driver selects enabling lcd clock according to has_clksel which means the CLKSEL bit of VIDCON0. If there is has_clksel, the driver will not enable the lcd clock using SCLK_FIMD because bus clock using HCLK is used a LCD pixel clock. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Bernie Thompson authored
Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Bernie Thompson authored
Enables page fault based detection of mmap writes to the framebuffer, which allows standard fbdev apps (like the generic fbdev xorg driver) to work on DisplayLink devices. Not all bugs are shaken out of the fb_defio path of udlfb, but it's tantalizingly close, so this seems a good time to enable by default. Alternatively, option can be disabled when running with an xorg driver that can more directly communicate damaged regions of the framebuffer via IOCTL. This is a simpler, higher perf option, when available. Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Stuart Hopkins authored
By default, udlfb allocates a 2nd buffer to shadow what's across the bus on the USB device. It can operate without this shadow, but then it cannot tell which pixels have changed, and must send all. Saves host memory, but worsens the USB 2.0 bus bottleneck. This option allows users in very low memory situations (e.g. bifferboard) to optionally turn off this shadow framebuffer. Signed-off-by: Stuart Hopkins <stuart@linux-depot.com> Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Dr. David Alan Gilbert authored
Add __user casting, a missing copy_from_user, and proper boolean Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Andrew Kephart authored
For at least one DisplayLink device, the vendor-specific information can be found in the config descriptor instead of as a separate, device-level descriptor. This patch searches the current interface (of the current config descriptor) for the DL vendor-specific descriptor. Signed-off-by: Andrew Kephart <akephart@akephart.org> Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Bernie Thompson authored
Fixes earlier problems where monitor would not return from blank Test with any DisplayLink-based USB 2.0 graphics adapter sudo nano /sys/class/graphics/fb?/blank and write out single digit FB_BLANK_* code from include/linux/fb.h Supports on (0), blank (1), suspend (2,3), powerdown (4) Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
-
- 22 Aug, 2011 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Add group event scheduling option to perf record/stat MAINTAINERS: Fix list of perf events source files perf tools: Fix build against newer glibc perf tools: Fix error handling of unknown events perf evlist: Fix missing event name init for default event perf list: Fix exit value
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds authored
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
-
Jeremy Fitzhardinge authored
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Stefano Stabellini authored
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a8 Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
-
- 21 Aug, 2011 4 commits
-
-
Josef Bacik authored
This fixes a regression introduced by commit cdcb725c ("Btrfs: check if there is enough space for balancing smarter"). We can't do 64-bit divides on 32-bit architectures. In cases where we need to divide/multiply by 2 we should just left/right shift respectively, and in cases where theres N number of devices use do_div. Also make the counters u64 to match up with rw_devices. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Acked-and-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush any pending end_io requests before DIO reads w/dioread_nolock ext4: fix nomblk_io_submit option so it correctly converts uninit blocks ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN. ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode ext4: Fix ext4_should_writeback_data() for no-journal mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c ALSA: hda - Don't spew too many ELD errors ALSA: usb-audio - Fix missing mixer dB information ALSA: hda - Add "PCM" volume to vmaster slave list ALSA: hda - Fix duplicated capture-volume creation for ALC268 models ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist ALSA: snd_usb_caiaq: track submitted output urbs
-
Randy Dunlap authored
Fix new kernel-doc warning in pci.c: Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps' Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Aug, 2011 4 commits
-
-
Julia Lawall authored
The label outnodev is only used when kzalloc has not yet taken place or has failed, so there is no need for the call for kfree under this label. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
snd_hda_get_conn_index() returns a negative value while the current code stores it in an unsigned int. It must be stored in a signed integer. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Currently HD-audio driver shows the all error ELD byte as an error in the kernel message. This is annoying when the video driver doesn't set the correct ELD from the beginning. e.g. radeon sends a zero-byte data, but we still check ELD with the fixed 128 byte as a workaround for some broken devices, it spews 128-times errors. For avoiding this, the driver aborts reading when the first byte is invalid. In such a case, the whole data is certainly invalid. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
-
- 19 Aug, 2011 11 commits
-
-
Jiaying Zhang authored
There is a race between ext4 buffer write and direct_IO read with dioread_nolock mount option enabled. The problem is that we clear PageWriteback flag during end_io time but will do uninitialized-to-initialized extent conversion later with dioread_nolock. If an O_direct read request comes in during this period, ext4 will return zero instead of the recently written data. This patch checks whether there are any pending uninitialized-to-initialized extent conversion requests before doing O_direct read to close the race. Note that this is just a bandaid fix. The fundamental issue is that we clear PageWriteback flag before we really complete an IO, which is problem-prone. To fix the fundamental issue, we may need to implement an extent tree cache that we can use to look up pending to-be-converted extents. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
Jesse Barnes authored
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits) Revert "cfq: Remove special treatment for metadata rqs." block: fix flush machinery for stacking drivers with differring flush flags block: improve rq_affinity placement blktrace: add FLUSH/FUA support Move some REQ flags to the common bio/request area allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH xen/blkback: Make description more obvious. cfq-iosched: Add documentation about idling block: Make rq_affinity = 1 work as expected block: swim3: fix unterminated of_device_id table block/genhd.c: remove useless cast in diskstats_show() drivers/cdrom/cdrom.c: relax check on dvd manufacturer value drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse bsg-lib: add module.h include cfq-iosched: Reduce linked group count upon group destruction blk-throttle: correctly determine sync bio loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices loop: add management interface for on-demand device allocation loop: replace linked list of allocated devices with an idr index ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: OF: Don't crash when bridge parent is NULL. PCI: export pcie_bus_configure_settings symbol PCI: code and comments cleanup PCI: make cardbus-bridge resources optional PCI: make SRIOV resources optional PCI : ability to relocate assigned pci-resources PCI: honor child buses add_size in hot plug configuration PCI: Set PCI-E Max Payload Size on fabric
-
David Daney authored
In pcibios_get_phb_of_node(), we will crash while booting if bus->bridge->parent is NULL. Check for this case and avoid dereferencing the NULL pointer. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Laurent Pinchart authored
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Laurent Pinchart authored
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Laurent Pinchart authored
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Laurent Pinchart authored
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Laurent Pinchart authored
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Laurent Pinchart authored
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-