- 04 Jan, 2014 25 commits
-
-
Mitch Williams authored
If the user does not assign a VF MAC address, then just report it as zero. Attempting to guess the correct primary MAC address of the VF is a futile and heartbreaking endeavour. Change-Id: I2673577a160afb6fc55094c890467b44e60c7584 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
Add an argument to led function and refactor code to flash LED lights correctly. Change-Id: I00b21607ced53aaa057159503875708871946259 Signed-off-by:
Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by:
-
Mitch Williams authored
Make a define used in the header file by both VF and PF drivers. Change-Id: Ie9e35adcc021cd6a8f7513934984eb4ed55774f5 Signed-off-by:
-
Mitch Williams authored
If the VF sends a bad message, be more informative about what it actually is. Change-Id: I89e06d2db416a1d05aeea016dd6e8b7870cae99a Signed-off-by:
-
Mitch Williams authored
If the VF asks to add an invalid MAC address, tell it that instead of just using a generic return code. Change-Id: I366aff5449fa5874ad51e2734cac2a71783ab14b Signed-off-by:
-
Mitch Williams authored
Don't complain when we disable queues that are already disable, or enable them when they're already enabled. This removes a bunch of bogus log messages that we see at every VF reset. Change-Id: Ia127be572abdccc48a53d8c43f8a07b8bb920de1 Signed-off-by:
-
Mitch Williams authored
Don't keep separate functions to enable and disable queues for the VFs. Just call the existing function that everybody else uses. Remove the unused functions. Change-Id: I15db9aad64a59e502bfe1e0fdab9b347ab85c12c Signed-off-by:
-
Mitch Williams authored
Fix the VF reset flow so that it works on real hardware. After discussions with the HW team, the reset flow has been changed somewhat. - Change the i40e_reset_vf function to a void type, and fix up the callers to reflect this. - Move the MSI-X disable code to i40e_free_vf_res since it must be done every time the VF is freed, regardless of whether or not it is reset. - Ensure that the PCIe bus is quiet before polling the reset bit. - Don't clear the VFGEN_RSTAT1 register at the beginning as it is cleared by the reset. - Poll longer for the reset to be done. - Disable the queues using an existing function rather than rolling our own. - Free and reallocate the VSI after reset to avoid rx hang. Change-Id: I11e2590431cb73e8663714d1cc5b23d59b809033 Signed-off-by:
-
Mitch Williams authored
The VF reset code will be refactored in future patches. Part of that refactor required it to call i40e_alloc_vf_res and i40e_free_vf_res, so the function must be moved. In order to make the future patches more readable, we perform the function move here, with no other changes. Change-Id: If6567c9c0bada6caafb2ee0227e0d9d50d05f27f Signed-off-by:
-
Joseph Gasparakis authored
This implements receive offload for VXLAN for i40e. The hardware supports checksum offload/verification of the inner/outer header. Change-Id: I450db300af6713f2044fef1191a0d1d294c13369 Signed-off-by:
Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by:
-
Jeff Kirsher authored
This adds the implementation for the VXLAN ndo's. This allows the hardware to do RX checksum offload for inner packets on the UDP ports that VXLAN notifies us about. Signed-off-by:
-
Shannon Nelson authored
Add curly-braces on a multi-line function. While we're here we also change to return void in i40e_vsi_clear_rings() since no caller cares. Change-Id: I261fcef20e2a39e18d83ec08fdd14456131dee91 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Signed-off-by:
-
Shannon Nelson authored
Wake on LAN is disabled by default and will remain that way for most platforms, but there is an NVM setting that allows vendors to enable it for a port if they think they've provided the right power environment for the device. This patch adds code to check the NVM setting and enable Magic Packet use if WoL is enabled for the port. Since only Magic Packet is supported, there's not a lot of HW configuration needed. Change-Id: I44e904a7b15695e34683009f487064cd86ea59b0 Signed-off-by:
-
Catherine Sullivan authored
Call i40e_set_pci_config_data from probe, then check that we are in a 8GT/s x8 PCIe slot and send a warning if we are not. Change-Id: I62815c574cee50d2787c50bbe956dde7a7a75a11 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by:
-
Anjali Singhai Jain authored
The HMC error interrupt would generate an un-necessary message "unhandled interrupt", causing extra log spam, in addition to causing a reset that was not necessary. Prevent this issue by handling the HMC error case explicitly, and only reset if the interrupt was from some of the other causes. Change-Id: Iabd203ba1dfc26a136b638597f3e9991acfa29f3 Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by:
-
Wei Yongjun authored
Using for_each_set_bit() to simplify the code. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Jeff Kirsher authored
Add missing PCI bus link speed 8.0 GT/s and bus link widths of x1, x2, x4 and x8. CC: <linux-kernel@vger.kernel.org> CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
Sergei Shtylyov authored
Running 'scripts/checkpatch.pl' on the driver files gives numerous warnings: - block comments using empty /* line; - unneeded \ at end of lines; - message string split across lines; - use of __attribute__((aligned(n))) instead of __aligned(n) macro; - use of __attribute__((packed)) instead of __packed macro. Additionally, running 'scripts/checkpatch.pl --strict' gives more complaints: - including the paragraph about writing to FSF into the heading comment; - alignment not matching open paren; - multiple assignments on one line; - use of CamelCase names; - missing {} on one of the *if* arms where another has them; - spinlock definition without a comment. While fixing these, also do some more style cleanups: - remove useless () around expressions; - add {} around multi-line *if* operator's arm; - remove space before comma; - add spaces after /* and before */; - properly align continuation lines of broken up expressions; - realign comments to the structure fields. Signed-off-by:Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
The return value should be the boolean value, not the error code. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Spotted-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julia Lawall authored
The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2; @@ pci_enable_wake(e1, - 0 + PCI_D0 ,e2) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
David S. Miller authored
Tom Herbert says: ==================== ipv4: Cache dst in tunnels Version 3 of caching routes in tunnels. Addressed some comments from Eric in this series. There are two patches (variants) in the series: 1) One dst cached for each tunnel. 2) Percpu dst cache per tunnel to avoid false sharing Testing with GRE tunnels on a 32 CPU host with bnx2x (RSS support for GRE) shows a modest improvement in CPU utilization with these patches running 200 TCP_RR netperf clients. Without patches 71.22% CPU utilization 138/180/244 90/95/99% latencies 1.30465e+06 CPU/tps 18318 CPU/tps With patches 69.84% 142/186/249 90/95/99% latencies 1.30827e+06 18732 CPU/tps ==================== Signed-off-by: -
Tom Herbert authored
percpu route cache eliminates share of dst refcnt between CPUs. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Tom Herbert authored
Avoid doing a route lookup on every packet being tunneled. In ip_tunnel.c cache the route returned from ip_route_output if the tunnel is "connected" so that all the rouitng parameters are taken from tunnel parms for a packet. Specifically, not NBMA tunnel and tos is from tunnel parms (not inner packet). Signed-off-by:
-
Neil Horman authored
Recently I updated the sctp socket option deprecation warnings to be both a bit more clear and ratelimited to prevent user processes from spamming the log file. Ben Hutchings suggested that I add the process name and pid to these warnings so that users can tell who is responsible for using the deprecated apis. This patch accomplishes that. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by:
-
Julia Lawall authored
Netdev_priv performs an addition, not a pointer dereference, so it seems quite unlikely that its result would ever be NULL. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ statement S; @@ - if (!netdev_priv(...)) S // </smpl> Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
- 03 Jan, 2014 1 commit
-
-
Cong Wang authored
This reverts commit de6fb288. Otherwise we got: net/sched/cls_cgroup.c:106:29: error: static declaration of ‘net_cls_subsys’ follows non-static declaration static struct cgroup_subsys net_cls_subsys = { ^ In file included from include/linux/cgroup.h:654:0, from net/sched/cls_cgroup.c:18: include/linux/cgroup_subsys.h:35:29: note: previous declaration of ‘net_cls_subsys’ was here SUBSYS(net_cls) ^ make[2]: *** [net/sched/cls_cgroup.o] Error 1 Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 02 Jan, 2014 14 commits
-
-
stephen hemminger authored
Doesn't need to be global. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
stephen hemminger authored
No need to export functions only used in one file. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Shawn Bohrer authored
If the hwtstamp_config matches what is currently set for the device then simply return. Without this change any program that tries to enable hardware timestamps will cause the link to cycle even if hardware timstamps were already enabled. Signed-off-by:
Shawn Bohrer <sbohrer@rgmadvisors.com> Acked-By:
Hadar Hen Zion <hadarh@mellanox.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Shawn Bohrer authored
This adds a PHC to the mlx4_en driver. We use reader/writer spinlocks to protect the timecounter since every packet received needs to call timecounter_cycle2time() when timestamping is enabled. This can become a performance bottleneck with RSS and multiple receive queues if normal spinlocks are used. This driver has been tested with both Documentation/ptp/testptp and the linuxptp project (http://linuxptp.sourceforge.net/) on a Mellanox ConnectX-3 card. Signed-off-by:
-
Weilong Chen authored
Signed-off-by:
Weilong Chen <chenweilong@huawei.com> Signed-off-by:
-
Weilong Chen authored
Signed-off-by:
-
Sachin Kamat authored
Commit 2960ed34 ("ARM: netx: move platform_data definitions") moved the file to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Julia Lawall authored
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Julia Lawall authored
Set the return variable to propagate any error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
-
Li RongQing authored
since the prune parameter for fib6_clean_all always is 0, remove it. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
wangweidong authored
In commit 3b8401fe ("tipc: kill unnecessary goto's") didn't make the code look most readable, so fix it. This patch is cosmetic and does not change the operation of TIPC in any way. Suggested-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Wang Weidong <wangweidong1@huawei.com> Signed-off-by:
-
Zhi Yong Wu authored
The code incorrectly save the queue index as the hash, so this patch is fixing it with the hash received in the stack receive path. Signed-off-by:
Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Salam Noureddine authored
Gratuitous arp packets are useful in switchover scenarios to update client arp tables as quickly as possible. Currently, the mac address of a neighbour is only updated after a locktime period has elapsed since the last update. In most use cases such delays are unacceptable for network admins. Moreover, the "updated" field of the neighbour stucture doesn't record the last time the address of a neighbour changed but records any change that happens to the neighbour. This is clearly a bug since locktime uses that field as meaning "addr_updated". With this observation, I was able to perpetuate a stale address by sending a stream of gratuitous arp packets spaced less than locktime apart. With this change the address is updated when a gratuitous arp is received and the arp_accept sysctl is set. Signed-off-by:
Salam Noureddine <noureddine@aristanetworks.com> Acked-by:
-
stephen hemminger authored
Running 'make namespacecheck' shows: net/ipv6/route.o ipv6_route_table_template rt6_bind_peer net/ipv6/icmp.o icmpv6_route_lookup ipv6_icmp_table_template This addresses some of those warnings by: * make icmpv6_route_lookup static * move inline's out of ip6_route.h since only used into route.c * move rt6_bind_peer into route.c Signed-off-by:
-
