Salil Mehta says:

====================
Hisilicon Network Subsystem 3 Ethernet Driver

This patch-set contains the support of the HNS3 (Hisilicon Network Subsystem 3)
Ethernet driver for hip08 family of SoCs and future upcoming SoCs.

Hisilicon's new hip08 SoCs have integrated ethernet based on PCI Express and
hence there was a need of new driver over the previous HNS driver which is
already part of the Linux mainline. This new driver is NOT backward
compatible with HNS.

This current driver is meant to control the Physical Function and there would
soon be a support of a separate driver for Virtual Function once this base PF
driver has been accepted. Also, this driver is the ongoing development work and
HNS3 Ethernet driver would be incrementally enhanced with more new features.

High Level Architecture:

        [ Ethtool ]
	   ^  |
           |  |
     [Ethernet Client]  [ODP/UIO Client] . . . [ RoCE Client ]
                         |                            |
                   [ HNAE Device ]                    |
                         |                            |
    ---------------------------------------------     |
                         |                            |
     [ HNAE3 Framework (Register/unregister) ]        |
                         |                            |
    ---------------------------------------------     |
                         |                            |
                   [ HCLGE Layer]                     |
         ________________|_________________           |
        |                |                 |          |
    [ MDIO ]    [ Scheduler/Shaper ]  [ Debugfs* ]    |
        |                |                 |          |
        |________________|_________________|          |
                         |                            |
             [ IMP command Interface ]                |
    ---------------------------------------------     |
              HIP08  H A R D W A R E                  *

Current patch-set broadly adds the support of the following PF functionality:
 1. Basic Rx and Tx functionality
 2. TSO support
 3. Ethtool support
 4. * Debugfs support -> this patch for now has been taken off.
 5. HNAE framework and hardware compatability layer
 6. Scheduler and Shaper support in transmit function
 7. MDIO support

Change Log:
V5->V6: Addressed below comments:
        * Andrew Lunn: Comments on MDIO and ethtool link mode
        * Leon Romanvosky: Some comments on HNAE layer tidy-up
        * Internal comments on redundant code removal, fixing error types etc.
V4->V5: Addressed below concerns:
        * Florian Fanelli: Miscellaneous comments on ethtool & enet layer
        * Stephen Hemminger: comment of Netdev stats in ethool layer
        * Leon Romanvosky: Comments on Driver Version String, naming & Kconfig
        * Rochard Cochran: Redundant function prototype
V3->V4: Addressed below comments:
        * Andrew Lunn: Various comments on MDIO, ethtool, ENET driver etc,
        * Stephen Hemminger: change access and updation to 64 but statistics
        * Bo You: some spelling mistakes and checkpatch.pl errors.
V2->V3: Addressed comments
        * Yuval Mintz: Removal of redundant userprio-to-tc code
        * Stephen Hemminger: Ethtool & interuupt enable
        * Andrew Lunn: On C45/C22 PHy support, HNAE, ethtool
        * Florian Fainelli: C45/C22 and phy_connect/attach
        * Intel kbuild errors
V1->V2: Addressed some comments by kbuild, Yuval MIntz, Andrew Lunn &
        Florian Fainelli in the following patches:
        * Add support of HNS3 Ethernet Driver for hip08 SoC
        * Add MDIO support to HNS3 Ethernet driver for hip08 SoC
        * Add support of debugfs interface to HNS3 driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the MAINTAINERS file with HNS3 Ethernet driver
maintainers names and other details. This also introduces the new
Makefiles required to build the HNS3 Ethernet driver and updates
the existing Kconfig file in the hisilicon folder.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support of the Ethtool interface to
the HNS3 Ethernet driver. Various commands to read the
statistics, configure the offloading, loopback selftest etc.
are supported.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support of MDIO bus interface for HNS3 driver.
Code provides various interfaces to start and stop the PHY layer
and to read and write the MDIO bus or PHY.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

THis patch adds the support of the Scheduling and Shaping
functionalities during the transmit leg. This also adds the
support of Pause at MAC level. (Pause at per-priority level
shall be added later along with the DCB feature).

Hardware as such consists of two types of cofiguration of 6 level
schedulers. Algorithms varies according to the level and type
of scheduler being used. Current patch is used to initialize
the mapping, algorithms(like SP, DWRR etc) and shaper(CIR, PIR etc)
being used.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support of Hisilicon Network Subsystem Accceleration
Engine and common operations to access it. This layer provides access to the
hardware configuration, hardware statistics. This layer is also
responsible for triggering the initialization of the PHY layer through
the below MDIO layer.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support of IMP (Integrated Management Processor)
command interface to the HNS3 driver.

Each PF/VF has support of CQP(Command Queue Pair) ring interface.
Each CQP consis of send queue CSQ and receive queue CRQ.
There are various commands a PF/VF may support, like for Flow Table
manipulation, Device management, Packet buffer allocation, Forwarding,
VLANs config, Tunneling/Overlays etc.

This patch contains code to initialize the command queue, manage the
command queue descriptors and Rx/Tx protocol with the command processor
in the form of various commands/results and acknowledgements.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support of the HNAE3 (Hisilicon Network
Acceleration Engine 3) framework support to the HNS3 driver.

Framework facilitates clients like ENET(HNS3 Ethernet Driver), RoCE
and user-space Ethernet drivers (like ODP etc.) to register with HNAE3
devices and their associated operations.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the support of Hisilicon Network Subsystem 3
Ethernet driver to hip08 family of SoCs.

This driver includes basic Rx/Tx functionality. It also includes
the client registration code with the HNAE3(Hisilicon Network
Acceleration Engine 3) framework.

This work provides the initial support to the hip08 SoC and
would incrementally add features or enhancements.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: remove typedefs from structures part 4

As we know, typedef is suggested not to use in kernel, even checkpatch.pl
also gives warnings about it. Now sctp is using it for many structures.

All this kind of typedef's using should be removed. This patchset is the
part 4 to remove it for another 14 basic structures from linux/sctp.h.
After this patchset, all typedefs are cleaned in linux/sctp.h.

Just as the part 1-3, No any code's logic would be changed in these patches,
only cleaning up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_auth_chunk_t, and
replace with struct sctp_auth_chunk in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_authhdr_t, and
replace with struct sctp_authhdr in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_addip_chunk_t, and
replace with struct sctp_addip_chunk in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_addiphdr_t, and
replace with struct sctp_addiphdr in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_addip_param_t, and
replace with struct sctp_addip_param in the places where it's
using this typedef.

It is to use sizeof(variable) instead of sizeof(type), and
also fix some indent problems.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove this typedef including the struct, there is even no places
using it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_cwrhdr_t, and
replace with struct sctp_cwrhdr in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_ecne_chunk_t, and
replace with struct sctp_ecne_chunk in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_ecnehdr_t, and
replace with struct sctp_ecnehdr in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_error_t, and replace
with enum sctp_error in the places where it's using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_operr_chunk_t, and
replace with struct sctp_operr_chunk in the places where it's
using this typedef.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_errhdr_t, and replace
with struct sctp_errhdr in the places where it's using this
typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to fix the name of struct sctp_shutdown_chunk_t
, replace with struct sctp_initack_chunk in the places where
it's using it.

It is also to fix some indent problem.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to remove the typedef sctp_shutdownhdr_t, and
replace with struct sctp_shutdownhdr in the places where it's
using this typedef.

It is also to use sizeof(variable) instead of sizeof(type).
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John Allen says:

====================
ibmvnic: Improve ethtool functionality

This patch series improves ibmvnic ethtool functionality by adding support
for ethtool -l and -g options, correcting existing statistics reporting,
and augmenting the existing statistics with counters for each tx and rx
queue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement .get_channels (ethtool -l) functionality
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement .get_ringparam (ethtool -g) functionality
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The vnic server reports the statistics buffer in big endian format and must
be converted to cpu endian in order to be displayed correctly on little
endian lpars.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add counters to report number of packets, bytes, and dropped packets for
each transmit queue and number of packets, bytes, and interrupts for each
receive queue. Modify ethtool callbacks to report the new statistics.
Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 45f119bf ("tcp: remove header prediction") introduced a
minor bug: the sk_state_change() and sk_wake_async() notifications for
a completed active connection happen twice: once in this new spot
inside tcp_finish_connect() and once in the existing code in
tcp_rcv_synsent_state_process() immediately after it calls
tcp_finish_connect(). This commit remoes the duplicate POLL_OUT
notifications.

Fixes: 45f119bf ("tcp: remove header prediction")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's been a while now since ds->dst is not an array anymore, but a
simple pointer to a dsa_switch_tree.

Fortunately, SF2 does not support multi-chip and thus ds->index is
always 0.

This patch substitutes 'ds->dst[ds->index].' with 'ds->dst->'.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add const to bin_attribute structure as it is only passed to the
functions sysfs_{remove/create}_bin_file. The corresponding
arguments are of type const, so declare the structure to be const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RDS over IB does not use multipath RDS, so the array
of additional rds_conn_path structures is always superfluous
in this case. Reduce the memory footprint of the rds module
by making this a dynamic allocation predicated on whether
the transport is mp_capable.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Tested-by: Efrain Galaviz <efrain.galaviz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's convenient to init ipip offload. We will check
the return value, and print KERN_CRIT info on failure.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Save the ifindex before it gets zeroed so the invalid
ifindex can be printed out.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - Remove unnecessary length qualifier, by Joe Perches

 - Remove too short %pM field width, by Sven Eckelmann

 - Remove return value handling from skb_put_data, by Sven Eckelmann

 - Spelling fixes, by Colin Ian King

 - Convert batman-adv.txt to reStructuredText, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When deal with low and high throughput, it is hard to achiece both
high performance and low latency. In order to achiece that, this patch
calculates the rx rate, and adjust the interrupt coalesce parameter
accordingly.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Tested-by: Weiwei Deng <dengweiwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

null_x25_address is only used to access the string it contains, so it can
be const.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
ipv4: fib: Provide per-nexthop offload indication

Ido says:

Offload indication for IPv4 routes is currently set in the FIB info's
flags. When multipath routes are employed, this can lead to a route being
marked as offloaded although only one of its nexthops is actually
offloaded.

Instead, this patchset aims to proivde a higher resolution for the offload
indication and report it on a per-nexthop basis.

Example output from patched iproute:

$ ip route show 192.168.200.0/24
192.168.200.0/24
        nexthop via 192.168.100.2 dev enp3s0np7 weight 1 offload
        nexthop via 192.168.101.3 dev enp3s0np8 weight 1

And once the second gateway is resolved:

$ ip route show 192.168.200.0/24
192.168.200.0/24
        nexthop via 192.168.100.2 dev enp3s0np7 weight 1 offload
        nexthop via 192.168.101.3 dev enp3s0np8 weight 1 offload

First patch teaches the kernel to look for the offload indication in the
nexthop flags. Patches 2-5 adjust current capable drivers to provide
offload indication on a per-nexthop basis. Last patch removes no longer
used functions to set offload indication in the FIB info's flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Previous patches converted users of these functions to provide offload
indication using the nexthop's flags instead of the FIB info's.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>