* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix cast warning for init.c
  microblaze: Wire up new syscalls
  microblaze: use generic syscalls.h
  microblaze: clean up signal handling
  microblaze: convert all simple headers to use asm-generic
  microblaze: use the generic lib/checksum.c
  microblaze: fall back on generic header files for the ABI

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLAB: Fix lockdep annotations
  fix RCU-callback-after-kmem_cache_destroy problem in sl[aou]b

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (25 commits)
  V4L/DVB (12206): get_dvb_firmware: Correct errors in MPC718 firmware extraction logic
  V4L/DVB (12203): radio-si470x: fix lock imbalance
  V4L/DVB (12202): em28xx, fix lock imbalance
  V4L/DVB (12172): em28xx: Add autodetection code for Silvercrest 1.3 mpix
  V4L/DVB (12171): em28xx: fix webcam usage with different output formats
  V4L/DVB (12169): em28xx-video: fix VIDIOC_G_FMT and VIDIOC_ENUMFMT with webcams
  V4L/DVB (12156): em28xx: Fix tuning for Terratec Cinergy T XS USB (zl10353 version)
  V4L/DVB (12139): em28xx: add other video formats
  V4L/DVB (12138): em28xx: add support for Silvercrest Webcam
  V4L/DVB (12174): mt9v011: let's stick with datasheet values where it works
  V4L/DVB (12173): mt9v011: properly calculate image resolution registers
  V4L/DVB (12137): mt9v011: CodingStyle fixes
  V4L/DVB (12136): mt9v011: Some fixes at the register initialization table
  V4L/DVB (12135): Add a driver for mt9v011 sensor
  V4L/DVB (12166): cx23885: add FIXME comment above set_frontend override
  V4L/DVB (12165): cx23885: override set_frontend to allow rf input path switching on the HVR1275
  V4L/DVB (12148): move V4L2_PIX_FMT_SGRBG8 to the proper place
  V4L/DVB (12182): cx18: Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353
  V4L/DVB (12181): get_dvb_firmware: Add Yuan MPC718 MT352 DVB-T "firmware" extraction
  V4L/DVB (12180): cx18: Update Yuan MPC-718 card entry with better information and guesses
  ...

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Don't use identity mapping for PCI devices behind bridges
  intel-iommu: Use iommu_should_identity_map() at startup time too.
  intel-iommu: No mapping for non-PCI devices
  intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers
  intel-iommu: Add iommu_should_identity_map() function
  intel-iommu: Fix reattaching of devices to identity mapping domain
  intel-iommu: Don't set identity mapping for bypassed graphics devices
  intel-iommu: Fix dma vs. mm page confusion with aligned_nrpages()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
  firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
  firewire: core: do not DMA-map stack addresses

This way they'll be properly initialized early enough for users that may
touch them before the framebuffer has been registered.

Drivers that allocate their fb_info structure some other way (like
matrocfb's broken static allocation) need to be fixed up appropriately.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do_execve() and ptrace_attach() return -EINTR if
mutex_lock_interruptible(->cred_guard_mutex) fails.

This is not right, change the code to return ERESTARTNOINTR.

Perhaps we should also change proc_pid_attr_write().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In include/linux/sysrq.h the constant EINVAL is being used but is undefined
if include/linux/errno.h is not included before.

Fix this by adding #include <linux/errno.h> at the beginning.
Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.

Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).

therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".

for this, I added refresh value in platform data like below.

static struct s3c_fb_pd_win xxx_fb_win0 = {
	/* this is to ensure we use win0 */
	.win_mode = {
		.refresh	= 60,
		.pixclock	= (66+4+2+480)*(15+5+3+800),
		.left_margin	= 66,
		.right_margin	= 2,
		.upper_margin	= 15,
		.lower_margin	= 3,
		.hsync_len	= 4,
		.vsync_len	= 5,
		.xres		= 480,
		.yres		= 800,
	},
	.max_bpp	= 32,
	.default_bpp	= 24,
};

static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
	.win[0]		= &xxx_fb_win0,
	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
			| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
	.setup_gpio	= s5pc1xx_fb_gpio_setup_24bpp,
};

xxx_machine_init()
{
                   .
                   .
                   .
               s3c_fb_set_platdata(&xxx_lcd_pdata);
}

platform data defined in machine code should be setting using
s3c_fb_set_platdata().
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These warnings were observed on MIPS32 using 2.6.31-rc1 and gcc-4.2.0:

mm/page_alloc.c: In function 'alloc_pages_exact':
mm/page_alloc.c:1986: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast

drivers/usb/mon/mon_bin.c: In function 'mon_alloc_buff':
drivers/usb/mon/mon_bin.c:1264: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast

[akpm@linux-foundation.org: fix kernel/perf_counter.c too]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In testing a backport of the write_begin/write_end AOPs, a 10% re-read
regression was noticed when running iozone.  This regression was
introduced because the old AOPs would always do a mark_page_accessed(page)
after the commit_write, but when the new AOPs where introduced, the only
place this was kept was in pagecache_write_end().

This patch does the same thing in the generic case as what is done in
pagecache_write_end(), which is just to mark the page accessed before we
do write_end().
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the multithread program core thread message error.

This issue affects arches with neither has CORE_DUMP_USE_REGSET nor
ELF_CORE_COPY_TASK_REGS, ARM is one of them.

The thread message of core file is generated in elf_dump_thread_status.
The register values is set by elf_core_copy_task_regs in this function.

If an arch doesn't define ELF_CORE_COPY_TASK_REGS,
elf_core_copy_task_regs() will do nothing.  Then the core file will not
have the register message of thread.

So add elf_core_copy_regs to set regiser values if ELF_CORE_COPY_TASK_REGS
doesn't define.

The following is how to reproduce this issue:

cat 1.c
#include <stdio.h>
#include <pthread.h>
#include <assert.h>

void td1(void * i)
{
       while (1)
       {
               printf ("1\n");
               sleep (1);
       }

       return;
}

void td2(void * i)
{
       while (1)
       {
               printf ("2\n");
               sleep (1);
       }

       return;
}

int
main(int argc,char *argv[],char *envp[])
{
       pthread_t       t1,t2;

       pthread_create(&t1, NULL, (void*)td1, NULL);
       pthread_create(&t2, NULL, (void*)td2, NULL);

       sleep (10);

       assert(0);

       return (0);
}
arm-xxx-gcc -g -lpthread 1.c -o 1
copy 1.c and 1 to a arm board.
Goto this board.
ulimit -c 1800000
./1
# ./1
1
2
1
...
...
1
1: 1.c:37: main: Assertion `0' failed.
Aborted (core dumped)
Then you can get a core file.
gdb 1 core.xxx
Without the patch:
(gdb) info threads
 3 process 909  0x00000000 in ?? ()
 2 process 908  0x00000000 in ?? ()
* 1 process 907  0x4a6e2238 in raise () from /lib/libc.so.6
You can found that the pc of 909 and 908 is 0x00000000.
With the patch:
(gdb) info threads
 3 process 885  0x4a749974 in nanosleep () from /lib/libc.so.6
 2 process 884  0x4a749974 in nanosleep () from /lib/libc.so.6
* 1 process 883  0x4a6e2238 in raise () from /lib/libc.so.6
The pc of 885 and 884 is right.
Signed-off-by: Hui Zhu <teawater@gmail.com>
Cc: Amerigo Wang <xiyou.wangcong@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I run many ffsb test cases on JBODs (typically 13/12 disks).  Comparing
with kernel 2.6.30, 2.6.31-rc1 has about 16% regression with
ffsb_create_4k.  The sub test case creates files continuously for 10
minitues and every file is 1MB.

Bisect located below patch.

5cee5815 is first bad commit
commit 5cee5815
Author: Jan Kara <jack@suse.cz>
Date:   Mon Apr 27 16:43:51 2009 +0200

    vfs: Make sys_sync() use fsync_super() (version 4)

    It is unnecessarily fragile to have two places (fsync_super() and do_sync())
    doing data integrity sync of the filesystem. Alter __fsync_super() to
    accommodate needs of both callers and use it. So after this patch
    __fsync_super() is the only place where we gather all the calls needed to
    properly send all data on a filesystem to disk.

As a matter of fact, ffsb calls sys_sync in the end to make sure all data
is flushed to disks and the flushing is counted into the result.  vmstat
shows ffsb is blocked when syncing for a long time.  With 2.6.30, ffsb is
blocked for a short time.

I checked the patch and did experiments to recover the original methods.
Eventually, the root cause is the patch deletes the calling to
wakeup_pdflush when syncing, so only ffsb is blocked on disk I/O.
wakeup_pdflush could ask pdflush to write back pages with ffsb at the
same time.

[akpm@linux-foundation.org: restore comment too]
Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix for this issue on x86_64:

rostedt@goodmis.org wrote:
> On bootup of the latest kernel my init segfaults. Debugging it,
> I found  that vread_tsc (a vsyscall) increments some strange
> kernel memory:
>
> 0000000000000000 <vread_tsc>:
>    0:   55                      push   %rbp
>    1:   48 ff 05 00 00 00 00    incq   0(%rip)
>                         # 8 <vread_tsc+0x8>
>                         4: R_X86_64_PC32        .bss+0x3c
>    8:   48 89 e5                mov    %rsp,%rbp
>    b:   66 66 90                xchg   %ax,%ax
>    e:   48 ff 05 00 00 00 00    incq   0(%rip)
>                         # 15 <vread_tsc+0x15>
>                         11: R_X86_64_PC32       .bss+0x44
>   15:   66 66 90                xchg   %ax,%ax
>   18:   48 ff 05 00 00 00 00    incq   0(%rip)
>                         # 1f <vread_tsc+0x1f>
>                         1b: R_X86_64_PC32       .bss+0x4c
>   1f:   0f 31                   rdtsc
>
>
> Those "incq" is very bad to happen in vsyscall memory, since
> userspace can not modify it. You need to make something prevent
> profiling of vsyscall  memory (like I do with ftrace).
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When i2c_smbus_read_byte_data fails in ds1374_work, we forgot to unlock
the held lock.  Fix that.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a typo in the VLYNQ bus driver Kconfig which prevented to turn on
VLYNQ bus debugging.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a typo in the vlynq bus driver which was missing the CONFIG_ prefix to
turn on debugging code.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove redundant call to the sisfb_get_fix() before sis frambuffer is
registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Michal Simek <monstr@monstr.eu>

Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open.
Signed-off-by: Michal Simek <monstr@monstr.eu>

The prototypes in syscalls.h all make sense for
microblaze, but for some of them, the actual implementation
in sys_microblaze.c needs to be adapted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>

When legacy signal handling is disabled, the
arch/microblaze/kernel/signal.c implementation can
be much simpler, as most of it is handled generically
from kernel/signal.c.

This is also a prerequisite for using the generic
asm/unistd.h, which does not provide __NR_sigreturn,
because this macro is referenced by the current signal.c
implementation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>

All the simple microblaze header files were adapted to use their
asm-generic implementations. These files are more simple and were quite
straightforward to change.

fb.h, vga.h and parport.h previously did not exist, using
the generic version makes it possible to build more drivers
successfully in allyesonfig.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>

The microblaze checksum code is mostly identical to
the asm-generic+lib version, so use that instead.
Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

Almost all of the ABI relevant header files now have generic
versions, so use those now in order to reduce the amount
of architecture specific code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>

The extraction routine for the MPC718 "firmware" had 2 bugs in it, where one
bug masked the effect of the other.  The loop iteration should have set
$prevlen = $currlen at the end of the loop, and the if() check should have used
&& instead of || for deciding if the firmware length is reasonable.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

There is one path with omitted unlock in si470x_fops_release. Fix that.

Cc: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

There is one omitted unlock in em28xx_usb_probe. Fix that.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Discovered the bug that were limiting the output format to just RGB565.
Now, it is possible to output image at Bayer format (the original one,
as generated by Silvercrest sensor, and two others), and also on YUY.

Adds Bayer formats also to the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Webcams have different constraints than other v4l devices. This patch
makes the format ioctls to behave better. It also fixes a bug at open()
handler, that were always reseting resolution to the maximum available
one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Fix the code so that the zl10353 version of the Terratec Cinergy T XS USB
starts working again.  This includes fixing what must have been a typo in the
GPIO definition for the digital side of the board, and setting of the
disable_i2c_gate_ctrl property for the zl10353 config, so that the i2c bus
doesn't get wedged the first time something tries to close the gate.

Also, add a printk() making clear that the mt352 version still isn't
supported.  This issue is still being actively debugged, but in the meantime
at least the dmesg output will show a very clear error...

Thanks to Jelle de Jong for providing sample hardware to test with.

Thanks to Simon Kenyon for testing various patches and providing SSH access to
his environment so I could debug with access to a valid signal source.

Cc: Jelle de Jong <jelledejong@powercraft.nl>
Cc: Simon Kenyon <simon@koala.ie>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Add suppport for the teste RGB565 format (16 bits/pixel).
Currently, webcam support works only at RGB565, at 640x480.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This webcam uses a em2710 chipset, that identifies itself as em2820,
plus a mt9v011 sensor, and a DY-301P lens.

It needs a few different initializations than a normal em28xx device.

Thanks to Hans de Goede <hdegoede@redhat.com> and Douglas Landgraf
<dougsland@redhat.com> for providing the acces for the webcam during
this weekend, I could make a patch for it while returning back from
FISL/Fudcom LATAM 2009.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The original driver for Silvercrest cameras were using some values that
are different from what datasheet says. As result, it was taken very
less snapshots per second than expected.

A test with the datasheet values showed that they work fine and give a
better frame rate. So, let's stick with datasheet values.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Instead of working with a table of precalculated values, fill them with
the proper values. Also, adds format functions that allow changing the
resolution, by cropping the image to the center of the sensor.

While here, move the sensor version check to the probe routine, to
indicate to the caller if the sensor is not supported by this driver.

Also, fixes a stupid bug where we're using &buffer[] instead of
buffer[].
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Adds driver for mt9v011 based on its datasheet, available at:
	http://download.micron.com/pdf/datasheets/imaging/MT9V011.pdf

The driver was tested with a webcam that will be added on a next patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>