- 13 Nov, 2012 40 commits
-
-
H Hartley Sweeten authored
For aesthetic reasons, rename the defines used for the register map and convert them from decimal to hex values. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The apci1016 board can also be supported by this driver. This board is also a 16 channel dio board with 16 input channels. The apci1016 does not have the watchdog timer feature of the apci1516 and apci2016. Signed-off-by:
-
H Hartley Sweeten authored
The low-level hardware support code for these drivers, hwdrv_apci1516.c and hwdrv_apci2016.c, is identical. Both of these boards are 16 channel dio boards. The 1516 board has 8 input/8 output channels and the 2016 has 16 output channels. To ease maintainability, merge the boardinfo and pci device information from the addi_apci_2016 driver into the addi_apci_1516 driver and modify the Kconfig and Makefile appropriately. This allows deleting the addi_apci_2016.c and hwdrv_apci2016.c files. Signed-off-by:
-
Malcolm Priestley authored
Calls ioctl SIOCGIWAPLIST use off stack buffers. clears up warning messages. main_usb.c:2015:1: warning: the frame size of 1888 bytes is larger than 1024 bytes [-Wframe-larger-than=] iwctl.c:683:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=] Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Radhesh Fadnis authored
In the context restore function, if the context is lost or not is being checked by the contents of the counter register. But this is logic hold good as long as counter reset value is zero, if the reset value is non-zero then above logic doesn't hold good. Hence removed checking of the register value and restoring the context. Signed-off-by:
Radhesh Fadnis <radhesh.fadnis@ti.com> Signed-off-by:
Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by:
Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by:
-
Eduardo Valentin authored
For debugging purposes, print the IRQ event for the domain being processed. Signed-off-by:
-
Eduardo Valentin authored
The API exposed by cpu cooling does not need any freq clip table anymore. Now the cpu cooling device is smart enough to build its own table. For this reason, this patch removes all the code that is generating a freq clip table and also removes all references in data structures regarding freq clip table. Signed-off-by:
-
Eduardo Valentin authored
Because the driver is not really using platform data, this patch removes the pdata nomenclature from this driver. Signed-off-by:
-
Eduardo Valentin authored
Because we are not including linux/io.h, the driver is not compiling. This patch adds the missing header. Signed-off-by:
-
Philipp Zabel authored
This has been added once, but does not seem to be necessary. Tested on i.MX51 and i.MX6. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Sascha Hauer authored
To allow the iomux to be configured for the display. Signed-off-by:
-
Philipp Zabel authored
For configuring interleaved formats. Signed-off-by:
-
Philipp Zabel authored
It's for debugging only, so use dev_dbg. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Michael Olbrich authored
YVYU is not supported by the IPU, so remove partial handling of this format and replace it with YUYV which is supported. Signed-off-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
-
Mark Einon authored
"The cpu return address and the DMA bus master address are both guaranteed to be aligned to the smallest PAGE_SIZE order which is greater than or equal to the requested size." There are several places in the et131x.c code where these addresses are aligned to a 4k boundary after a call to dma_alloc_coherent(), needlessly. Remove these alignment offset calculations, and the et131x_align_allocated_memory() call which is only used for 4k alignments. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
In et131x_rx_dma_memory_alloc(), we loop over fbr_entries - the values of fbr_align and fbr_chunksize calculated in the loop do not depend on the loop counter and are the same for all loop iterations. Take the calculations of these values out of the loop, as we only need to calculate them once per loop, not once per loop iteration. Signed-off-by:
-
Johan Meiring authored
This fixes one of the two instances of an 80+ char line in the file. Fixing the other instance would have decreased the readability of the code, in my opinion. Signed-off-by:
Johan Meiring <johanmeiring@gmail.com> Signed-off-by:
-
Johan Meiring authored
This uses linux/io.h instead of asm/io.h and cleans up an 80+ character issue. Signed-off-by:
-
Stefan Hajnoczi authored
The CONFIG_LINE6_USB_DEBUG option is no longer relevant since dyndbg dev_dbg() is now used instead of a compile-time decision whether to enable debug messages or not. Signed-off-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
-
Stefan Hajnoczi authored
The DEBUG_MESSAGES() macro is no longer needed since dev_dbg() is now used for debug messages. Signed-off-by:
-
Stefan Hajnoczi authored
The dyndbg feature allows dev_dbg() calls to be enabled/disabled at runtime and is therefore more convenient than static debug log messages. Use dev_dbg() instead of the line6-specific DEBUG_MESSAGES() macro. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
The LED value is an int, so replace strict_strtol() with kstrtoint(). It's safe to pass in the actual variable instead of a local temporary because strto*() doesn't write to the result unless the function returns success. Signed-off-by:
-
Stefan Hajnoczi authored
There are a few instances of 80+ character lines in playback.c. Two instances are just because of a useless comment "this is somewhat paranoid", so drop the comment. Other instances are straightforward line wrapping. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Checkpatch warns when quoted strings are split across lines. The rationale is that quoted strings should be left on a single line so that grep works. (The 80 character line limit does not apply to quoted strings.) Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
YAMANE Toshiaki authored
Modified to eliminate the deep nesting. Signed-off-by:
YAMANE Toshiaki <yamanetoshi@gmail.com> Signed-off-by:
-
YAMANE Toshiaki authored
Modified to eliminate the deep nesting. Signed-off-by:
-
YAMANE Toshiaki authored
Modified to eliminate the deep nesting and redundant description. Signed-off-by:
-
YAMANE Toshiaki authored
Fixed a description of the procedure call dev_dbg(). Signed-off-by:
-
YAMANE Toshiaki authored
fixed below checkpatch warnings. - WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... - WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... - WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... - WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ... and add pr_fmt. Signed-off-by:
-
Adil Mujeeb authored
Fixed checpatch.pl reported ERRORs (excluding WARNING of line over 80 characters) Signed-off-by:
Adil Mujeeb <mujeeb.adil@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Adil Mujeeb authored
Removed printk tracing call Signed-off-by:
-
Adil Mujeeb authored
Fixed checkpatch.pl reported ERRORs Signed-off-by:
-
Adil Mujeeb authored
Removed unnecessary printk and pr_debug tracing calls Signed-off-by:
-
Kumar Amit Mehta authored
fix for few error messages as reported by checkpatch.pl Signed-off-by:
Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by:
-
