Apply new UMC enable for VNC Dynamic Power Gate mode start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove Dynamic Power Gate mode unused steps during VCN start
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add Dynamic Power Gate mode Register XX check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update Dynamic Power Gate mode VCN global tiling registers
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update Dynamic Power Gate mode VCN memory control
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reduce unnecessary local variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add ring write/read pointer check for VCN dynamic power gate mode
stop,to make sure that no job is left in ring before turn off DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update latest static power gate mode stop function for VCN
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update latest UVD_MPC register for VCN. Use defined
macro to replace value for readability.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add new register offset/mask for VCN to support
latest VCN implementation.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY] dp debugfs file does not exist for eDP under
      /sys/kernel/debug/dri/0/eDP-1. the root is phy debugfs
      is created for dp connector only.
[HOW] for eDP connector, create phy debugfs too.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For sriov, when first run windows guest, then run linux guest, the gds
vmid0 size will be reset to 0 by windows guest. So if the value has been
reset to 0, then set the value to the default value in linux guest.

v2:
Fixed value instead of reading mmGDS_VMID0_SIZE.

v3:
Set the default value of the switch.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need to make sure that we don't race between job completion and
timeout.

v2: put revert label after calling the handling manually
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Cleanup starting the timeout a bit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Give user some hints when the power profile setting is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Correctly translate the power profile specified by user to workload
type accepted by SMU fw.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

 Add a new list.h helper for doing bulk updates.  Used by ttm.
- Fixes for display underflow on VI APUs at 4K with UVD running
- Endian fixes for powerplay on vega
- DC fixes for interlaced video
- Vega20 powerplay fixes
- RV/RV2/PCO powerplay fixes
- Fix for spurious ACPI events on HG laptops
- Fix a memory leak in DC on driver unload
- Fixes for manual fan control mode switching
- Suspend/resume robustness fixes
- Fix display handling on RV2
- VCN fixes for DPG on PCO
- Misc code cleanups and warning fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011014739.3117-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2018-10-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Fix build failure without CONFIG_DRM_FBDEV_EMULATION (Arnd)
- Add Maxime to drm-misc maintainer group (Sean)

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181010203951.GA229456@art_vandelay

Merge branch 'mediatek-drm-next-4.20' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next

This include hdmi output support for mt2701 and mt7623.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538616148.28906.1.camel@mtksdaap41

Just initial HDMI 2.0 support, and a bunch of other cleanups.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA=mgEm9JxP7AX7Sff-AEs7a75M4SqwFHmLPZhJojm4k=OA@mail.gmail.com

In case memory resources for *bl_desc* were allocated, release
them before return.

Addresses-Coverity-ID: 1472021 ("Resource leak")
Fixes: 0d466901 ("drm/nouveau/secboot/acr: Remove VLA usage")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Scrambling is required for supporting any mode over 340MHz. If it's not
supported, reject any modes that would require it.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

When SCDC is supported, make sure that we configure the GPU and monitor
to the same parameters.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The register programmed by the clock method needs to contain a different
setting for the link speed as well as special divider settings.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

High pixel clocks are required to use a 40 TMDS divider instead of 10,
and even low ones may optionally use scrambling depending on device
support.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Per the documentation in drm_get_pci_dev(), this function is deprecated
and shouldn't be used anymore. As it turns out, we're going to need to
stop using drm_get_pci_dev() anyway in order to allow us to turn off the
card before full system shutdowns, otherwise we'll hit race conditions
with userspace while trying to tear down the card on shutdown.

So, start using drm_dev_get() and drm_dev_put(), and just turn our
load/unload callbacks into open coded init/fini() functions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We forget to free drm in all instances of failure, and additionally also
forget to destroy the master client if the other client fails
initialization.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

There's literally no difference between any of the backlight init
functions besides the backlight properties they set and the backlight
callbacks that they set, so move all of the duplicated backlight init
code out of there and into nouveau_backlight_init().

This gets rid of a lot of copy pasta!

Changes since v1:
- Some of the pre-refactor callbacks were storing nv_encoder in callback
  data for the backlight devices that they registered, as opposed to
  nouveau_drm. This got missed and caused some bugs that didn't
  originally appear on my setup (NULL kernel derefs) for some reason.
  So, fix this by finding the nouveau_encoder in
  nouveau_backlight_init(), and using that as the callback data for all
  gens instead even if they don't care about the encoder.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Jeffery Miller <jmiller@neverware.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Still no functional changes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

More consistent with the rest of the codebase, no functional changes
here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Currently module unloading is broken in nouveau due to a rather annoying
race condition resulting from nouveau_backlight.c having gone a bit
stale over time:

[ 1960.791143] ==================================================================
[ 1960.791394] BUG: KASAN: use-after-free in nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.791460] Read of size 4 at addr ffff88075accf350 by task zsh/11185
[ 1960.791521]
[ 1960.791545] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G           O      4.18.0Lyude-Test+ #4
[ 1960.791580] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018
[ 1960.791628] Call Trace:
[ 1960.791680]  dump_stack+0xa4/0xfd
[ 1960.791721]  print_address_description+0x71/0x239
[ 1960.791833]  ? nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.791877]  kasan_report.cold.6+0x242/0x2fe
[ 1960.791919]  __asan_report_load4_noabort+0x19/0x20
[ 1960.792012]  nouveau_backlight_exit+0x112/0x150 [nouveau]
[ 1960.792081]  nouveau_display_destroy+0x76/0x150 [nouveau]
[ 1960.792150]  nouveau_drm_device_fini+0xb7/0x190 [nouveau]
[ 1960.792265]  nouveau_drm_device_remove+0x14b/0x1d0 [nouveau]
[ 1960.792347]  ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau]
[ 1960.792378]  ? trace_hardirqs_on_caller+0x38b/0x570
[ 1960.792406]  ? trace_hardirqs_on+0xd/0x10
[ 1960.792472]  nouveau_drm_remove+0x37/0x50 [nouveau]
[ 1960.792502]  pci_device_remove+0x112/0x2d0
[ 1960.792530]  ? pcibios_free_irq+0x10/0x10
[ 1960.792558]  ? kasan_check_write+0x14/0x20
[ 1960.792587]  device_release_driver_internal+0x35c/0x650
[ 1960.792617]  device_release_driver+0x12/0x20
[ 1960.792643]  pci_stop_bus_device+0x172/0x1e0
[ 1960.792671]  pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 1960.792715]  remove_store+0xcb/0xe0
[ 1960.792753]  ? sriov_numvfs_store+0x2e0/0x2e0
[ 1960.792779]  ? __lock_is_held+0xb5/0x140
[ 1960.792808]  ? component_add+0x530/0x530
[ 1960.792834]  dev_attr_store+0x3f/0x70
[ 1960.792859]  ? sysfs_file_ops+0x11d/0x170
[ 1960.792885]  sysfs_kf_write+0x104/0x150
[ 1960.792915]  ? sysfs_file_ops+0x170/0x170
[ 1960.792940]  kernfs_fop_write+0x24f/0x400
[ 1960.792978]  ? __lock_acquire+0x6ea/0x47f0
[ 1960.793021]  __vfs_write+0xeb/0x760
[ 1960.793048]  ? kernel_read+0x130/0x130
[ 1960.793076]  ? __lock_is_held+0xb5/0x140
[ 1960.793107]  ? rcu_read_lock_sched_held+0xdd/0x110
[ 1960.793135]  ? rcu_sync_lockdep_assert+0x78/0xb0
[ 1960.793162]  ? __sb_start_write+0x183/0x220
[ 1960.793189]  vfs_write+0x14d/0x4a0
[ 1960.793229]  ksys_write+0xd2/0x1b0
[ 1960.793255]  ? __ia32_sys_read+0xb0/0xb0
[ 1960.793298]  ? fput+0x1d/0x120
[ 1960.793324]  ? filp_close+0xf3/0x130
[ 1960.793349]  ? entry_SYSCALL_64_after_hwframe+0x59/0xbe
[ 1960.793380]  __x64_sys_write+0x73/0xb0
[ 1960.793407]  do_syscall_64+0xaa/0x400
[ 1960.793433]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.793460] RIP: 0033:0x7f59df433164
[ 1960.793486] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 1960.793541] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1960.793576] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164
[ 1960.793620] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001
[ 1960.793665] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80
[ 1960.793696] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760
[ 1960.793730] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002
[ 1960.793768]
[ 1960.793790] Allocated by task 11167:
[ 1960.793816]  save_stack+0x43/0xd0
[ 1960.793841]  kasan_kmalloc+0xc4/0xe0
[ 1960.793880]  kasan_slab_alloc+0x11/0x20
[ 1960.793905]  kmem_cache_alloc+0xd7/0x270
[ 1960.793944]  getname_flags+0xbd/0x520
[ 1960.793969]  user_path_at_empty+0x23/0x50
[ 1960.793994]  do_faccessat+0x1fc/0x5d0
[ 1960.794018]  __x64_sys_access+0x59/0x80
[ 1960.794043]  do_syscall_64+0xaa/0x400
[ 1960.794067]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.794093]
[ 1960.794127] Freed by task 11167:
[ 1960.794152]  save_stack+0x43/0xd0
[ 1960.794190]  __kasan_slab_free+0x139/0x190
[ 1960.794215]  kasan_slab_free+0xe/0x10
[ 1960.794239]  kmem_cache_free+0xcb/0x2c0
[ 1960.794264]  putname+0xad/0xe0
[ 1960.794287]  filename_lookup.part.59+0x1f1/0x360
[ 1960.794313]  user_path_at_empty+0x3e/0x50
[ 1960.794338]  do_faccessat+0x1fc/0x5d0
[ 1960.794362]  __x64_sys_access+0x59/0x80
[ 1960.794393]  do_syscall_64+0xaa/0x400
[ 1960.794421]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.794461]
[ 1960.794483] The buggy address belongs to the object at ffff88075acceac0
[ 1960.794483]  which belongs to the cache names_cache of size 4096
[ 1960.794540] The buggy address is located 2192 bytes inside of
[ 1960.794540]  4096-byte region [ffff88075acceac0, ffff88075accfac0)
[ 1960.794581] The buggy address belongs to the page:
[ 1960.794609] page:ffffea001d6b3200 count:1 mapcount:0 mapping:ffff880778e4b1c0 index:0x0 compound_mapcount: 0
[ 1960.794651] flags: 0x8000000000008100(slab|head)
[ 1960.794679] raw: 8000000000008100 ffffea001d39e808 ffffea001d39ea08 ffff880778e4b1c0
[ 1960.794739] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 1960.794785] page dumped because: kasan: bad access detected
[ 1960.794813]
[ 1960.794834] Memory state around the buggy address:
[ 1960.794861]  ffff88075accf200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794894]  ffff88075accf280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794925] >ffff88075accf300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.794956]                                                  ^
[ 1960.794985]  ffff88075accf380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.795017]  ffff88075accf400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 1960.795061] ==================================================================
[ 1960.795106] Disabling lock debugging due to kernel taint
[ 1960.795131] ------------[ cut here ]------------
[ 1960.795148] ida_remove called for id=1802201963 which is not allocated.
[ 1960.795193] WARNING: CPU: 7 PID: 11185 at lib/idr.c:521 ida_remove+0x184/0x210
[ 1960.795213] Modules linked in: nouveau(O) mxm_wmi ttm i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm joydev vfat fat intel_rapl x86_pkg_temp_thermal coretemp crc32_pclmul iTCO_wdt psmouse wmi_bmof mei_me tpm_tis mei tpm_tis_core tpm i2c_i801 thinkpad_acpi pcc_cpufreq crc32c_intel serio_raw xhci_pci xhci_hcd wmi video i2c_dev i2c_core
[ 1960.795305] CPU: 7 PID: 11185 Comm: zsh Kdump: loaded Tainted: G    B      O      4.18.0Lyude-Test+ #4
[ 1960.795330] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET79W (1.52 ) 07/13/2018
[ 1960.795352] RIP: 0010:ida_remove+0x184/0x210
[ 1960.795370] Code: 4c 89 f7 e8 ae c8 00 00 eb 22 41 83 c4 02 4c 89 e8 41 83 fc 3f 0f 86 64 ff ff ff 44 89 fe 48 c7 c7 20 94 1e 83 e8 54 ed 81 fe <0f> 0b 48 b8 00 00 00 00 00 fc ff df 48 01 c3 c7 03 00 00 00 00 c7
[ 1960.795402] RSP: 0018:ffff88074d4df7b8 EFLAGS: 00010082
[ 1960.795421] RAX: 0000000000000000 RBX: 1ffff100e9a9befa RCX: ffffffff81479975
[ 1960.795440] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88077c1de690
[ 1960.795460] RBP: ffff88074d4df878 R08: ffffed00ef83bcd3 R09: ffffed00ef83bcd2
[ 1960.795479] R10: ffffed00ef83bcd2 R11: ffff88077c1de697 R12: 000000000000036b
[ 1960.795498] R13: 0000000000000202 R14: ffffffffa0aa7fa0 R15: 000000006b6b6b6b
[ 1960.795518] FS:  00007f59e0995b80(0000) GS:ffff88077c1c0000(0000) knlGS:0000000000000000
[ 1960.795553] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1960.795571] CR2: 00007f59e09a2010 CR3: 00000004a1a70005 CR4: 00000000003606e0
[ 1960.795596] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1960.795629] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1960.795649] Call Trace:
[ 1960.795667]  ? ida_destroy+0x1d0/0x1d0
[ 1960.795686]  ? kasan_check_write+0x14/0x20
[ 1960.795704]  ? do_raw_spin_lock+0xc2/0x1c0
[ 1960.795724]  ida_simple_remove+0x26/0x40
[ 1960.795794]  nouveau_backlight_exit+0x9d/0x150 [nouveau]
[ 1960.795867]  nouveau_display_destroy+0x76/0x150 [nouveau]
[ 1960.795930]  nouveau_drm_device_fini+0xb7/0x190 [nouveau]
[ 1960.795989]  nouveau_drm_device_remove+0x14b/0x1d0 [nouveau]
[ 1960.796047]  ? nouveau_cli_work_queue+0x2e0/0x2e0 [nouveau]
[ 1960.796067]  ? trace_hardirqs_on_caller+0x38b/0x570
[ 1960.796089]  ? trace_hardirqs_on+0xd/0x10
[ 1960.796146]  nouveau_drm_remove+0x37/0x50 [nouveau]
[ 1960.796167]  pci_device_remove+0x112/0x2d0
[ 1960.796186]  ? pcibios_free_irq+0x10/0x10
[ 1960.796218]  ? kasan_check_write+0x14/0x20
[ 1960.796237]  device_release_driver_internal+0x35c/0x650
[ 1960.796257]  device_release_driver+0x12/0x20
[ 1960.796289]  pci_stop_bus_device+0x172/0x1e0
[ 1960.796308]  pci_stop_and_remove_bus_device_locked+0x1a/0x30
[ 1960.796328]  remove_store+0xcb/0xe0
[ 1960.796345]  ? sriov_numvfs_store+0x2e0/0x2e0
[ 1960.796364]  ? __lock_is_held+0xb5/0x140
[ 1960.796383]  ? component_add+0x530/0x530
[ 1960.796401]  dev_attr_store+0x3f/0x70
[ 1960.796419]  ? sysfs_file_ops+0x11d/0x170
[ 1960.796436]  sysfs_kf_write+0x104/0x150
[ 1960.796454]  ? sysfs_file_ops+0x170/0x170
[ 1960.796471]  kernfs_fop_write+0x24f/0x400
[ 1960.796488]  ? __lock_acquire+0x6ea/0x47f0
[ 1960.796520]  __vfs_write+0xeb/0x760
[ 1960.796538]  ? kernel_read+0x130/0x130
[ 1960.796556]  ? __lock_is_held+0xb5/0x140
[ 1960.796590]  ? rcu_read_lock_sched_held+0xdd/0x110
[ 1960.796608]  ? rcu_sync_lockdep_assert+0x78/0xb0
[ 1960.796626]  ? __sb_start_write+0x183/0x220
[ 1960.796648]  vfs_write+0x14d/0x4a0
[ 1960.796666]  ksys_write+0xd2/0x1b0
[ 1960.796684]  ? __ia32_sys_read+0xb0/0xb0
[ 1960.796701]  ? fput+0x1d/0x120
[ 1960.796732]  ? filp_close+0xf3/0x130
[ 1960.796749]  ? entry_SYSCALL_64_after_hwframe+0x59/0xbe
[ 1960.796768]  __x64_sys_write+0x73/0xb0
[ 1960.796800]  do_syscall_64+0xaa/0x400
[ 1960.796818]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1960.796836] RIP: 0033:0x7f59df433164
[ 1960.796854] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 81 38 2d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53
[ 1960.796884] RSP: 002b:00007ffd70ee2fb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1960.796906] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f59df433164
[ 1960.796926] RDX: 0000000000000002 RSI: 00005578088640c0 RDI: 0000000000000001
[ 1960.796946] RBP: 00005578088640c0 R08: 00007f59df7038c0 R09: 00007f59e0995b80
[ 1960.796966] R10: 000000000000000a R11: 0000000000000246 R12: 00007f59df702760
[ 1960.796985] R13: 0000000000000002 R14: 00007f59df6fd760 R15: 0000000000000002
[ 1960.797008] irq event stamp: 509990
[ 1960.797026] hardirqs last  enabled at (509989): [<ffffffff8119ff78>] flush_work+0x4b8/0x6d0
[ 1960.797063] hardirqs last disabled at (509990): [<ffffffff8297c395>] _raw_spin_lock_irqsave+0x25/0x60
[ 1960.797085] softirqs last  enabled at (509744): [<ffffffff82c005ad>] __do_softirq+0x5ad/0x8c0
[ 1960.797121] softirqs last disabled at (509735): [<ffffffff8115aa15>] irq_exit+0x1a5/0x1e0
[ 1960.797142] ---[ end trace fb1342325f1846b8 ]---

While I haven't actually gone into the details of what's causing this to
happen (maybe the kernel removes the backlight device in the device core
before we get to it?), it doesn't really matter anyway because the way
nouveau handles backlights has long since been deprecated.

According to the documentation on the drm_connector->late_register()
hook, the ->late_register() hook should be used for adding extra
connector-related devices. Vice versa, the ->early_unregister() hook is
meant to be used for removing those devices.

So: gut nouveau_drm->bl_list and nouveau_drm->backlight, and replace
them with per-connector backlight structures. Additionally, move
backlight registration/teardown into the ->late_register() and
->early_unregister() hooks so that DRM can give us a chance to remove
the backlight before the connector is even removed. This appears to fix
the problem once and for all.

Changes since v2:
- Use NV_INFO_ONCE for printing GMUX information, since otherwise this
  will end up printing that message for as many times as we have
  connectors
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Since we're about to use this in nouveau_backlight.c. Same thing as
DRM_WARN_ONCE, DRM_INFO_ONCE, etc...
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Remember, ida IDs start at 0, not 1!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Move all entries between @first and including @last before @head.

This is useful for LRU lists where a whole block of entries should be
moved to the end of the list.

Used as a band aid in TTM, but better placed in the common list headers.
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move copy_array helpers to smu_helper.c and share between
vega12 and vega20.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Properly swap data from vbios.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Properly swap data from vbios.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Properly swap data from vbios.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c: In function 'amdgpu_ucode_init_bo':
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c:431:39: warning:
 variable 'header' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>