- 10 May, 2012 1 commit
-
-
Greg Kroah-Hartman authored
As pointed out by Dan Carpenter, we should not be trying to call dev_err() on a structure that was previously determined to be NULL, that's just foolish and asking for trouble. So just delete the message, it's not going to do anyone any good to have it anyway. This problem was caused by 0f089094: "usb: gadget: ci13xxx: replace home-brewed logging with dev_{err,warn,info}" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 May, 2012 13 commits
-
-
Lukasz Majewski authored
This commit adds a cosmetic change to the s3c-hsotg UDC driver. It moves s3c-hsotg.h to other linux/ related inclusions. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Ferre authored
A possible race condition appears because we are not initializing the ohci->regs before calling usb_hcd_request_irqs(). We move the call to ohci_init() in hcd->driver->reset() instead of hcd->driver->start() to fix this. This was experienced when we share the same IRQ line between OHCI and EHCI controllers. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Christian Eggers <christian.eggers@kathrein.de> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Ferre authored
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Igor Grinberg authored
When PHY reset pin is connected to a GPIO on external GPIO chip (e.g. I2C), we should not call the gpio_set_value() function, but gpio_set_value_cansleep(). Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Finally, convert to the new style framework, using udc_start/udc_stop methods. Since there is no need in the global _udc pointer, remove it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Currently, endpoints are initialized in gadget start/stop methods, however for the new style gadgets it is expected that bind() can be called before controller's start(), and we need endpoints already initialized at that point. So, move endpoint initialization to controller's probe before we switch to the "new style" gadget framework. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Logging output in the driver is mostly done using custom err/warn/info macros which rely on the existence of the global variable _udc, which is a global reference to the udc controller structure. This reference will have to go in order to allow us to have more than one chipidea udc in the system. Thus, replace custom macros with dev_{err,warn,info} using the platform device where possible. The trace() macro, which is a nop by default is left for tracing purposes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Let's break ci13xxx driver into a separate udc driver and platform drivers _pci and _msm, which will create a platform device for each pci (or msm) device found. The approach was introduced by Felipe in dwc3 driver and there seems to be no reason not to use it. msm related code is only compile-tested. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
After the UDC class conversion, there is no reason to limit the kernel to have only one UDC controller in the system. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Use lookup table instead of conditional macrodefinitions of register addresses. With two different possible register layouts and different register offsets, it's easiest to build a table with register addresses at probe time, based on the information supplied from the platform and device capabilities. This way we get rid of branch-per-register-access. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Make global variables that are specific for each UDC instance part of struct ci13xxx. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Small and self-evident cleanup. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
This patch (as1553) adds an unusual_dev entrie for the Yarvik PMP400 MP4 music player. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Jesse Feddema <jdfeddema@gmail.com> Tested-by: Jesse Feddema <jdfeddema@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 May, 2012 6 commits
-
-
Greg Kroah-Hartman authored
This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Add pci ids for ChipIdea UDC as found in langwell/penwell SoCs. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Currently, the register prefixes in the driver seem to be mixed: the capability registers are the ones that contain capability information, such as number of hardware endpoints, while the registers that are used to program the controller are called operational registers. Normally, capability registers start at 0x100 offset of the register window and are followed by operational registers. In some versions, however, capability registers start at 0x0 offset. This patch renames the register and adjusts their offsets appropriately, leaving the possibility of having a non-standard capability offset. I couldn't find any mentions of the TESTMODE register anywhere, so I suspect it might only be enabled in chipidea internal versions of the controller and I'm really inclined to remove it from the driver or at least hiding it behind a config option. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Change ep0{out,in} macros into dynamically assigned pointers in gadget initialization time. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Shishkin authored
Since ep0{out,in} are never on gadget's ep_list, there's no need to try to unlink them, even more so because ep_list linkage is not initialized for these endpoints. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Luebbe authored
The Davinci USB platform device (in mach-davinci/usb.c) uses "ohci" as the name. To allow autoloading of the relevant driver, the module needs to set the MODULE_ALIAS. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 May, 2012 16 commits
-
-
Paul Bolle authored
It took me surprisingly long to find the location where the Linux Foundation vendor id (0x1d6b) is set for the root hubs. A minor update to three comments makes those locations (trivially) greppable. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthias Fend authored
The out functions should only handle actual available data instead of the complete buffer. Otherwise for example the ep0_consume function will report ghost events since it tries to decode the complete buffer - which may contain partly invalid data. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Cc: stable <stable@vger.kernel.org> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
girish verma authored
Testing BUILD_BUG_ON xhci_doorbell_array structure 2 time, redundant statement Signed-off-by: Girish Verma <girish.gcet@gmail.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> --- drivers/usb/host/xhci.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
This patch changes the output format specifier of a debugging line in the xhci-hcd driver. An URB's transfer_buffer_length should be printed in decimal; there's no reason to print it in hex. Especially since the actual_length value, printed earlier on the same line, is already in decimal. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Éric Piel authored
This adds VID/PID for the PI E-861. Without it, I had to do: modprobe -q ftdi-sio product=0x1008 vendor=0x1a72 http://www.physikinstrumente.com/en/products/prdetail.php?sortnr=900610Signed-off-by: Éric Piel <piel@delmic.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
I can't remember why I wrote it like this many many years ago, but it's not needed at all, let's rely on the usb-serial core for this function, especially as it is being overridden by it anyway. This lets us make usb_serial_probe() a static function, which it should be. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This really just is the resume callback for the device, so use that, especially as the usb-serial core just overrode this callback so it wasn't being made anyway. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Johan Hovold <jhovold@gmail.com> Cc: Anton Samokhvalov <pg83@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This really just is the resume callback for the device, so use that, especially as the usb-serial core just overrode this callback so it wasn't being made anyway. Cc: Johan Hovold <jhovold@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This is now set by the usb-serial core, no need for the driver to individually set it. Thanks to Alan Stern for the idea to get rid of it. Cc: William Greathouse <wgreathouse@smva.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Oliver Neukum <oliver@neukum.name> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Support Department <support@connecttech.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Andrew Worsley <amworsley@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Donald Lee <donald@asix.com.tw> Cc: Julia Lawall <julia@diku.dk> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: Wang YanQing <Udknight@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
This patch (as1551) cleans up the PM-related entries in the usb_driver structures of the various USB serial driver modules. Those entries are now filled in by the usb-serial core during driver registration, so they don't need to be initialized explicitly in the source code. The same is true of the one remaining no_dynamic_id entry. reset_resume remains a small problem, because the serial core doesn't support it. The patch ignores these entries. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
This patch (as1550) fixes a bug in the usb-serial core that affects the ftdi_sio driver and most likely others as well. The core implements suspend and resume routines, but it doesn't store pointers to those routines in the usb_driver structures that it registers, even though it does set those drivers' supports_autosuspend flag. The end result is that when one of these devices is autosuspended, we try to call through a NULL pointer. The patch fixes the problem by setting the suspend and resume method pointers to the appropriate routines in the USB serial core, along with the supports_autosuspend field, in each driver as it is registered. This should be back-ported to all the stable kernels that have the new usb_serial_register_drivers() interface. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Frank Schäfer <schaefer.frank@gmx.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usbGreg Kroah-Hartman authored
usb: dwc3: patches for v3.5 merge window This pull request contains one workaround for a Silicon Issue found on all RTL releases prior to 2.20a, which would cause a metastability state on Run/Stop bit. We also have some patches implementing a few extra Standard requests introduced by USB3 spec (Set SEL and Set Isoch Delay), as well as one patch, which has been pending for a long time, implementing LPM support. Last, but not least, we are splitting the host address space out of the dwc3 core driver otherwise xHCI won't be able to request_mem_region() its own address space. This patch is only needed because we are (as we should) re-using the xHCI driver, which is a completely separate module. Together with these three big changes, come a few extra preparatory patches which most move code around, define macros and so on, as well as a fix for Isochronous transfers which hasn't been triggered before. [ resolved conflicts and build error in drivers/usb/dwc3/gadget.c - gregkh]
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usbGreg Kroah-Hartman authored
usb: musb: patches for v3.5 merge window MUSB has only two patches for this merge window adding support for TI's TI81xx platforms which contains two MUSB IP instances. Nothing scary here, just yet another glue layer for MUSB.
-
Greg Kroah-Hartman authored
Merge tag 'gadget-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: gadget: patches for v3.5 This pull request is quite big, but mainly because there's a giant rework of the s3c_hsotg.c driver to make it friendlier for other users. Samsung Exynos platforms use the DesignWare Core USB2 IP from Synopsys so it's a bit unfair to have the driver work for Samsung platforms only. In short, the big rework is in preparation to make the driver more reusable. Another big rework in this pull request came from Ido, where he's removing the redundant pointer for the endpoint descriptor from the controller driver's own endpoint representation. The same pointer is available through the generic struct usb_ep structure. Also on this pull request is the conversion of a few extra controller drivers to the new style registration, which allows multiple controllers to be available on the same platform and helps remove global pointers from those drivers. Together with those big changes, there's the usual fixes and cleanups to gadget drivers. Nothing major.
-
Greg Kroah-Hartman authored
This resolves the conflict with: drivers/usb/host/ehci-tegra.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 May, 2012 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes form Peter Anvin * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver x86, relocs: Remove an unused variable asm-generic: Use __BITS_PER_LONG in statfs.h x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "The big ones here are a memory leak we introduced in rc1, and a scheduling while atomic if the transid on disk doesn't match the transid we expected. This happens for corrupt blocks, or out of date disks. It also fixes up the ioctl definition for our ioctl to resolve logical inode numbers. The __u32 was a merging error and doesn't match what we ship in the progs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: avoid sleeping in verify_parent_transid while atomic Btrfs: fix crash in scrub repair code when device is missing btrfs: Fix mismatching struct members in ioctl.h Btrfs: fix page leak when allocing extent buffers Btrfs: Add properly locking around add_root_to_dirty_list
-
Al Viro authored
Setting TIF_IA32 in load_aout_binary() used to be enough; these days TASK_SIZE is controlled by TIF_ADDR32 and that one doesn't get set there. Switch to use of set_personality_ia32()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-