Pull RCU updates from Ingo Molnar:
 "The RCU changes in this cycle are:

   - Dynticks updates, consolidating open-coded counter accesses into a
     well-defined API

   - SRCU updates: Simplify algorithm, add formal verification

   - Documentation updates

   - Miscellaneous fixes

   - Torture-test updates

  Most of the diffstat comes from the relatively large documentation
  update"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  srcu: Reduce probability of SRCU ->unlock_count[] counter overflow
  rcutorture: Add CBMC-based formal verification for SRCU
  srcu: Force full grace-period ordering
  srcu: Implement more-efficient reader counts
  rcu: Adjust FQS offline checks for exact online-CPU detection
  rcu: Check cond_resched_rcu_qs() state less often to reduce GP overhead
  rcu: Abstract extended quiescent state determination
  rcu: Abstract dynticks extended quiescent state enter/exit operations
  rcu: Add lockdep checks to synchronous expedited primitives
  rcu: Eliminate unused expedited_normal counter
  llist: Clarify comments about when locking is needed
  rcu: Fix comment in rcu_organize_nocb_kthreads()
  rcu: Enable RCU tracepoints by default to aid in debugging
  rcu: Make rcu_cpu_starting() use its "cpu" argument
  rcu: Add comment headers to expedited-grace-period counter functions
  rcu: Don't wake rcuc/X kthreads on NOCB CPUs
  rcu: Re-enable TASKS_RCU for User Mode Linux
  rcu: Once again use NMI-based stack traces in stall warnings
  rcu: Remove short-term CPU kicking
  rcu: Add long-term CPU kicking
  ...

Pull debugobjects updates from Ingo Molnar:
 "A number of scalability improvements by Waimang Long"

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Improve variable naming
  debugobjects: Reduce contention on the global pool_lock
  debugobjects: Scale thresholds with # of CPUs
  debugobjects: Track number of kmem_cache_alloc/kmem_cache_free done

Pull irq updates from Thomas Gleixner:
 "This update provides:

   - Yet another two irq controller chip drivers

   - A few updates and fixes for GICV3

   - A resource managed function for interrupt allocation

   - Fixes, updates and enhancements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/qcom: Fix error handling
  genirq: Clarify logic calculating bogus irqreturn_t values
  genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg
  genirq/devres: Use dev_name(dev) as default for devname
  genirq: Fix /proc/interrupts output alignment
  irqdesc: Add a resource managed version of irq_alloc_descs()
  irqchip/gic-v3-its: Zero command on allocation
  irqchip/gic-v3-its: Fix command buffer allocation
  irqchip/mips-gic: Fix local interrupts
  irqchip: Add a driver for Cortina Gemini
  irqchip: DT bindings for Cortina Gemini irqchip
  irqchip/gic-v3: Remove duplicate definition of GICD_TYPER_LPIS
  irqchip/gic-v3-its: Rename MAPVI to MAPTI
  irqchip/gic-v3-its: Drop deprecated GITS_BASER_TYPE_CPU
  irqchip/gic-v3-its: Refactor command encoding
  irqchip/gic-v3-its: Enable cacheable attribute Read-allocate hints
  irqchip/qcom: Add IRQ combiner driver
  ACPI: Add support for ResourceSource/IRQ domain mapping
  ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan
  irq/platform-msi: Fix comment about maximal MSIs

Pull timer updates from Thomas Gleixner:
 "Nothing exciting, just the usual pile of fixes, updates and cleanups:

   - A bunch of clocksource driver updates

   - Removal of CONFIG_TIMER_STATS and the related /proc file

   - More posix timer slim down work

   - A scalability enhancement in the tick broadcast code

   - Math cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  hrtimer: Catch invalid clockids again
  math64, tile: Fix build failure
  clocksource/drivers/arm_arch_timer:: Mark cyclecounter __ro_after_init
  timerfd: Protect the might cancel mechanism proper
  timer_list: Remove useless cast when printing
  time: Remove CONFIG_TIMER_STATS
  clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101
  clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
  clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter
  clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 erratum
  clocksource/drivers/ostm: Add renesas-ostm timer driver
  clocksource/drivers/ostm: Document renesas-ostm timer DT bindings
  clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock
  clocksource/drivers/gemini: Add driver for the Cortina Gemini
  clocksource: add DT bindings for Cortina Gemini
  clockevents: Add a clkevt-of mechanism like clksrc-of
  tick/broadcast: Reduce lock cacheline contention
  timers: Omit POSIX timer stuff from task_struct when disabled
  x86/timer: Make delay() work during early bootup
  delay: Add explanation of udelay() inaccuracy
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - sbs-charger driver
   - max14656_charger_detector
   - axp20x_ac_power

  New chip/feature support"
   - axp20x_usb_power: add AXP223 support
   - tps65217: add usb charger support
   - qcom_smbb: support otg regulator
   - at91-reset: add samx7 support

  Dropped drivers:
   - intel_mid_battery (platform was dropped)

  Fixes:
   - at91-poweroff: avoid wearing off LPDDR memory
   - replace deprecated extcon API
   - lots of cleanup and style fixes
   - misc minor functionality fixes"

* tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits)
  power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
  dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
  power: supply: axp20x_usb_power: use IIO channels when available
  power: supply: max14656: Export I2C and OF device ID as module aliases
  power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
  power: supply: bq24190_charger: Adjust formatting
  power: supply: bq24190_charger: Handle fault before status on interrupt
  power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()
  power: supply: bq24190_charger: Call power_supply_changed() for relevant component
  power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()
  power: supply: bq24190_charger: Call set_mode_host() on pm_resume()
  power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING
  power: supply: qcom_smbb: add regulator dependency
  power: reset: at91-reset: remove leftover platform_device_id
  power: reset: at91-reset: add samx7 support
  power: supply: max14656: fix platform_no_drv_owner.cocci warnings
  power: supply: pcf50633-charger: Compress return logic into one line.
  power: supply: ab8500_btemp: Compress return logic into one line.
  power: reset: at91-poweroff: timely shutdown LPDDR memories
  ARM: at91: define LPDDR types
  ...

Pull EDAC updates from Borislav Petkov:

 - Make amd64_edac still load on a machine with unpopulated nodes +
   cleanups (Yazen Ghannam)

 - Expose per-DIMM error counts in sysfs (Aaron Miller)

 - Add T2080 l2-cache support to mpc85xx (Chris Packham)

 - Random other small improvements/cleanups/fixlets

* tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, mce_amd: Print IPID and Syndrome on a separate line
  EDAC, amd64: Bump driver version
  MAINTAINERS, EDAC: Update email for Thor Thayer
  EDAC, fsl_ddr: Make locally used symbols static
  EDAC, mpc85xx: Add T2080 l2-cache support
  EDAC, amd64: Add x86cpuid sanity check during init
  EDAC, amd64: Don't treat ECC disabled as failure
  EDAC: Add routine to check if MC devices list is empty
  EDAC, amd64: Remove unused printing macros
  EDAC, amd64: Rework messages in ecc_enabled()
  EDAC, amd64: Move global code out of instance functions
  EDAC, amd64: Free unused memory when init_one_instance() fails
  EDAC, mce_amd: Give more context to deferred error message
  EDAC, i7300: Test for the second channel properly
  EDAC, sb_edac: Get rid of ->show_interleave_mode()
  EDAC: Expose per-DIMM error counts in sysfs
  EDAC, amd64: Save and return err code from probe_one_instance()
  EDAC, i82975x: Add ioremap_nocache() error handling
  EDAC: Fix typos in enum mem_type comments
  EDAC: Make dev_attr_sdram_scrub_rate static

Merge tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - new driver for stts751

 - it87: Added support for IT8622E and IT8792E; improved support for
   other chips

 - lm70: Added support for TMP122/124

 - use permission-specific DEVICE_ATTR variants where possible

 - fixed overflows in various drivers

 - minor improvements in various drivers

* tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (95 commits)
  hwmon: (sht15) Add device tree support
  devicetree: add lm90 thermal_zone sensor support
  hwmon: (it87) Add support for IT8792E
  hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers
  hwmon: (it87) Fix pwm4 detection for IT8620 and IT8628
  hwmon: (it87) Ensure that pwm control cache is current before updating values
  hwmon: (it87) Improve IT8622 support
  hwmon: (it87) Add support for IT8622E
  hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5V
  DT: add binding documentation for STTS751
  hwmon: new driver for ST stts751 thermal sensor
  hwmon: Register thermal zone only if 'dev' parameter was provided
  hwmon: Relax name attribute validation for new APIs
  hwmon: Update documentation to clarify rules for the 'name' attribute
  hwmon: Make name attribute mandatory for new APIs
  hwmon: (lm70) Add support for TI TMP122/124
  hwmon: (lm70) Utilize dev_warn instead of pr_warn
  hwmon: (ltc4151) Export OF device ID table as module aliases
  hwmon: (adc128d818) Preserve operation mode
  hwmon: (adc128d818) Support operation modes 1-3
  ...

Pull MTD updates from Brian Norris:
 "MTD updates for 4.11:

  General:
   - new kernel API for retrieving max bad blocks per die (not used yet)
   - track (and expose via sysfs) a partition's device tree node
   - support a "label" device tree property for naming an MTD

  NAND:
   - sunxi: avoid busy-waiting for NAND events
   - ifc: fix ECC handling on IFC v1.0
   - OX820: add explicit dependency on ARCH_OXNAS in Kconfig
   - core: add a new manufacture ID and fix a kernel-doc warning
   - fsmc: kill pdata support
   - lpc32xx_slc: remove unneeded NULL check
   - support dynamic "max bad blocks" detection via ONFI

  SPI NOR:
   - add support for the 4-byte address instruction set
   - add support for new memory parts
   - add support to S3AN memories
   - add support to the Intel SPI controller
   - add support to the Aspeed AST2400 and AST2550 controllers
   - support max SPI message sizes in m25p80_read()
   - fixes for the Candence and Freescale QSPI drivers

  Other:
   - add support for Gemini flash probing
   - bcm47xxsflash: add support for reading outside memory-mapped window
   - bcm47xxparts: extend to support multiple TRX partitions
   - misc fixes and typos

  Extra note: we've pulled in an MFD subtree from Lee Jones as a
  dependency for a new Intel SPI NOR driver"

[ Kudos to Brian for sending pull request a week early:

   "I refuse to acknowledge the existence of 4.10-rc8 and am therefore
    sending our MTD changes for 4.11 now"

  which is all good ]

* tag 'for-linus-20170212' of git://git.infradead.org/linux-mtd: (52 commits)
  mtd: aspeed: remove redundant dev_err call in aspeed_smc_probe()
  dt-bindings: mtd: add a common label property to all mtd devices
  mtd: name the mtd device with an optional label property
  mtd: physmap_of: fixup gemini/versatile dependencies
  mtd: spi-nor: cqspi: remove redundant dead code on error return check
  Documentation: mtk-quadspi: update DT bindings
  mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ
  mtd:fsl-quadspi:use the property fields of SPI-NOR
  mtd: spi-nor: Add support for gd25q16
  mtd: spi-nor: Fix S3AN addressing calculation
  mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()
  mtd: spi-nor: add dt support for Everspin MRAMs
  mtd: spi-nor: Add lock/unlock support for f25l32pa
  mtd: spi-nor: add a stateless method to support memory size above 128Mib
  mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
  mtd: m25p80: consider max message size in m25p80_read
  mtd: spi-nor: bindings for the Aspeed memory controllers
  mtd: aspeed: add memory controllers for the Aspeed AST2400 SoC
  mtd: spi-nor: add memory controllers for the Aspeed AST2500 SoC
  mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write()
  ...

What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len.  Or with ->dxferp pointing
to an array full of empty iovecs.

Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...

Found by Dmitry Vyukov and syzkaller.

[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
  underlying issue.  - Linus ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.

Found by Dmitry Vyukov and syzkaller.

[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
  cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
  might still be a cause of excessive log spamming.

  NOTE! If this warning ever triggers, we may end up leaking resources,
  since this doesn't bother to try to clean the command up. So this
  WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
  much worse.

  People really need to stop using BUG_ON() for "this shouldn't ever
  happen". It makes pretty much any bug worse.     - Linus ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

'devm_ioremap()' returns NULL on error, not an error pointer.

Fixes: f20cc9b0 ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: marc.zyngier@arm.com
Cc: kernel-janitors@vger.kernel.org
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/20170218083434.2289-1-christophe.jaillet@wanadoo.frSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped
check, release the dst before returning an error.

Fixes: ec5e3b0a ("ipv6: Inhibit IPv4-mapped src address on the wire.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARM SoC fixes from Arnd Bergmann:
 "Two more bugfixes that came in during this week:

   - a defconfig change to enable a vital driver used on some Qualcomm
     based phones. This was already queued for 4.11, but the maintainer
     asked to have it in 4.10 after all.

   - a regression fix for the reset controller framework, this got
     broken by a typo in the 4.10 merge window"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: enable Qualcomm RPMCC
  reset: fix shared reset triggered_count decrement on error

Pull ARM fixes from Russell King:
 "A couple of fixes from Kees concerning problems he spotted with our
  user access support"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
  ARM: 8657/1: uaccess: consistently check object sizes

Pull x86 fix from Thomas Gleixner:
 "Make the build clean by working around yet another GCC stupidity"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vm86: Fix unused variable warning if THP is disabled

Pull locking fix from Thomas Gleixner:
 "Move the futex init function to core initcall so user mode helper does
  not run into an uninitialized futex syscall"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Move futex_init() to core_initcall

Pull timer fixes from Thomas Gleixner:
 "Two small fixes::

   - Prevent deadlock on the tick broadcast lock. Found and fixed by
     Mike.

   - Stop using printk() in the timekeeping debug code to prevent a
     deadlock against the scheduler"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Use deferred printk() in debug code
  tick/broadcast: Prevent deadlock on tick_broadcast_lock

Pull networking fixes from David Miller:

 1) Fix leak in dpaa_eth error paths, from Dan Carpenter.

 2) Use after free when using IPV6_RECVPKTINFO, from Andrey Konovalov.

 3) fanout_release() cannot be invoked from atomic contexts, from Anoob
    Soman.

 4) Fix bogus attempt at lockdep annotation in IRDA.

 5) dev_fill_metadata_dst() can OOP on a NULL dst cache pointer, from
    Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  irda: Fix lockdep annotations in hashbin_delete().
  vxlan: fix oops in dev_fill_metadata_dst
  dccp: fix freeing skb too early for IPV6_RECVPKTINFO
  dpaa_eth: small leak on error
  packet: Do not call fanout_release from atomic contexts

Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:

  hw-breakpoint: Failed to enable monitor mode on CPU 0.
  hw-breakpoint: CPU 0 failed to disable vector catch

  ===============================
  [ ERR: suspicious RCU usage.  ]
  4.10.0-rc8-next-20170215+ #119 Not tainted
  -------------------------------
  ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  RCU used illegally from idle CPU!
  rcu_scheduler_active = 2, debug_locks = 0
  RCU used illegally from extended quiescent state!
  2 locks held by swapper/0/0:
   #0:  (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
   #1:  (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
  Hardware name: Generic OMAP4 (Flattened Device Tree)
    console_unlock
    vprintk_emit
    vprintk_default
    printk
    reset_ctrl_regs
    dbg_cpu_pm_notify
    notifier_call_chain
    cpu_pm_exit
    omap_enter_idle_coupled
    cpuidle_enter_state
    cpuidle_enter_state_coupled
    do_idle
    cpu_startup_entry
    start_kernel

This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".

Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.comSigned-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Cc: <stable@vger.kernel.org> [3.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

commit 82e88ff1 ("hrtimer: Revert CLOCK_MONOTONIC_RAW support") removed
unfortunately a sanity check in the hrtimer code which was part of that
MONOTONIC_RAW patch series.

It would have caught the bogus usage of CLOCK_MONOTONIC_RAW in the wireless
code. So bring it back.

It is way too easy to take any random clockid and feed it to the hrtimer
subsystem. At best, it gets mapped to a monotonic base, but it would be
better to just catch illegal values as early as possible.
    
Detect invalid clockids, map them to CLOCK_MONOTONIC and emit a warning.

[ tglx: Replaced the BUG by a WARN and gracefully map to CLOCK_MONOTONIC ]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Tomasz Nowicki <tn@semihalf.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Link: http://lkml.kernel.org/r/1452879670-16133-3-git-send-email-marc.zyngier@arm.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.

Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block layer fix from Jens Axboe:
 "A single fix for a lockdep splat reported by Thomas and Gabriel"

* 'for-linus' of git://git.kernel.dk/linux-block:
  cfq-iosched: don't call wbt_disable_default() with IRQs disabled

Since the commit 0c1d70af ("net: use dst_cache for vxlan device")
vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL
dst_cache pointer, so the latter should explicitly check for
valid dst_cache ptr. Unfortunately the commit d71785ff ("net: add
dst_cache to ovs vxlan lwtunnel") removed said check.

As a result is possible to trigger a null pointer access calling
vxlan_fill_metadata_dst(), e.g. with:

ovs-vsctl add-br ovs-br0
ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \
	type=vxlan options:remote_ip=192.168.1.1 \
	options:key=1234 options:dst_port=4789 ofport_request=10
ip address add dev ovs-br0 172.16.1.2/24
ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \
	targets=\"172.16.1.1:1234\" sampling=1
iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234

This commit addresses the issue passing to vxlan_get_route() the
dst_cache already available into the lwt info processed by
vxlan_fill_metadata_dst().

Fixes: d71785ff ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.

However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.

Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.

Similar fixes for TCP:

fb7e2399 [TCP]: skb is unexpectedly freed.
0aea76d3 tcp: SYN packets are now
simply consumed
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull powerpc fix from Michael Ellerman:
 "One fix from Paul: we can not use the radix MMU under a hypervisor for
  now.

  Although the code checked if the processor supports radix, that is not
  sufficient"

* tag 'powerpc-4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Disable use of radix under a hypervisor

Pull input fix from Dmitry Torokhov:
 "Just a single change to Elan touchpad driver to recognize a new ACPI
  ID"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add ELAN0605 to the ACPI table

Pull i2c fix from Wolfram Sang:
 "I2C has a revert to fix a regression"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: designware: detect when dynamic tar update is possible"

Pull MMC fix from Ulf Hansson:
 "Fix multi-bit bus width without high-speed mode for MMC"

* tag 'mmc-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: fix multi-bit bus width without high-speed mode

Pull NTB bugfixes frfom Jon Mason:
 "NTB bug fixes to address a crash when unloading the ntb module, a DMA
  engine unmap leak, allowing the proper queue choice, and clearing the
  SKX irq bit"

* tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntb:
  ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly
  ntb_transport: Pick an unused queue
  ntb: ntb_perf missing dmaengine_unmap_put
  NTB: ntb_transport: fix debugfs_remove_recursive

This should be >= instead of > here.  It means that we don't increment
the free count enough so it becomes off by one.

Fixes: 9ad1a374 ("dpaa_eth: add support for DPAA Ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull "Reset controller fixes for v4.10" from Philipp Zabel:

- Remove erroneous negation of the error check of the reset function
  to decrement trigger_count in the error case, not on success. This
  fixes shared resets to actually only trigger once, as intended.

* tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux:
  reset: fix shared reset triggered_count decrement on error

Commit 66644982 ("packet: call fanout_release, while UNREGISTERING a
netdev"), unfortunately, introduced the following issues.

1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside
rcu_read-side critical section. rcu_read_lock disables preemption, most often,
which prohibits calling sleeping functions.

[  ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section!
[  ]
[  ] rcu_scheduler_active = 1, debug_locks = 0
[  ] 4 locks held by ovs-vswitchd/1969:
[  ]  #0:  (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40
[  ]  #1:  (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch]
[  ]  #2:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20
[  ]  #3:  (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0
[  ]
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110
[  ]  [<ffffffff810a2da7>] ___might_sleep+0x57/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30
[  ]  [<ffffffff81186e88>] ? printk+0x4d/0x4f
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock).
"sleeping function called from invalid context"

[  ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[  ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810a2f52>] ___might_sleep+0x202/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

3. calling dev_remove_pack(&fanout->prot_hook), from inside
spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack()
-> synchronize_net(), which might sleep.

[  ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff81186274>] __schedule_bug+0x64/0x73
[  ]  [<ffffffff8162b8cb>] __schedule+0x6b/0xd10
[  ]  [<ffffffff8162c5db>] schedule+0x6b/0x80
[  ]  [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410
[  ]  [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810
[  ]  [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10
[  ]  [<ffffffff8154eab5>] synchronize_net+0x35/0x50
[  ]  [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20
[  ]  [<ffffffff8161077e>] fanout_release+0xbe/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

4. fanout_release() races with calls from different CPU.

To fix the above problems, remove the call to fanout_release() under
rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and
netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order
to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to
__fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure
fanout->prot_hook is removed as well.

Fixes: 66644982 ("packet: call fanout_release, while UNREGISTERING a netdev")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For a shared reset, when the reset is successful, the triggered_count is
incremented when trying to call the reset callback, so that another device
sharing the same reset line won't trigger it again. If the reset has not
been triggered successfully, the trigger_count should be decremented.

The code does the opposite, and decrements the trigger_count on success.
As a consequence, another device sharing the reset will be able to trigger
it again.

Fixed be removing negation in from of the error code of the reset function.

Fixes: 7da33a37 ("reset: allow using reset_control_reset with shared reset")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

On Skylake hardware, the link_poll isn't clearing the pending interrupt
bit.  Adding a new function for SKX that handles clearing of status bit the
right way.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.
Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>

In the normal I/O execution path, ntb_perf is missing a call to
dmaengine_unmap_put() after submission. That causes us to leak
unmap objects.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Signed-off-by: Jon Mason <jdmason@kudzu.us>

The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level
directory must not be later than
debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory.
Otherwise, the sub-level directory will not exist, and it would be
invalid (panic) to attempt to remove it.  This removes the top-level
directory last, after sub-level directories have been cleaned up.
Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Pull drm fixes from Dave Airlie:
 "Just two last minute fixes, one for DP MST oopses and one for a radeon
  regression"

* tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
  drm/dp/mst: fix kernel oops when turning off secondary monitor