- 28 Feb, 2012 4 commits
-
-
Viresh Kumar authored
Thaw and poweroff routines are missing for spear-keyboard. They are required for: - Error case scenarios during freeze - Using test features, of hibernate. Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
Rajeev Kumar authored
Let platform pass mode information to keyboard driver according to which it configures itself. The mode can be - KEYPAD_9x9 0 - KEYPAD_6x6 1 - KEYPAD_2x2 2 Signed-off-by:
-
Rajeev Kumar authored
Add 6x6 keypad matrix and rename 9x9 keymap Signed-off-by:
-
Rajeev Kumar authored
Signed-off-by:
-
- 24 Feb, 2012 2 commits
-
-
Paul Fox authored
Make use of psmouse_activate() and psmouse_deactivate() from psmouse-base.c Signed-off-by:
Andres Salomon <dilinger@queued.net> Signed-off-by:
-
Andres Salomon authored
Other drivers duplicate this code; no sense in having it be private to psmouse-base. Signed-off-by:
-
- 03 Feb, 2012 3 commits
-
-
Shridhar Rasal authored
Allow marking some of GPIO pins as ignored to to avoid continuously generating KBC input events. Signed-off-by:
Shridhar Rasal <srasal@nvidia.com> Signed-off-by:
-
Jan Steinhoff authored
This patch adds a driver for Synaptics USB touchpad or pointing stick devices. These USB devices emulate an USB mouse by default, so one can also use the usbhid driver. However, in combination with special user space drivers this kernel driver allows one to customize the behaviour of the device. An extended version of this driver with support for the cPad background display can be found at <http://jan-steinhoff.de/linux/synaptics-usb.html>. Signed-off-by:
Jan Steinhoff <mail@jan-steinhoff.de> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
John Stultz authored
As noted by Arve and others, since wall time can jump backwards, it is difficult to use for input because one cannot determine if one event occurred before another or for how long a key was pressed. However, the timestamp field is part of the kernel ABI, and cannot be changed without possibly breaking existing users. This patch adds a new IOCTL that allows a clockid to be set in the evdev_client struct that will specify which time base to use for event timestamps (ie: CLOCK_MONOTONIC instead of CLOCK_REALTIME). For now we only support CLOCK_MONOTONIC and CLOCK_REALTIME, but in the future we could support other clockids if appropriate. The default remains CLOCK_REALTIME, so we don't change the ABI. Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Daniel Kurtz <djkurtz@google.com> Signed-off-by:
-
- 31 Jan, 2012 4 commits
-
-
Javier Martinez Canillas authored
Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by:
Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
Ping Cheng authored
And add two new data formats. Tested-by:
Chris Bagwell <chris@cnpbagwell.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
-
Ping Cheng authored
Tested-by:
-
Masanari Iida authored
Correct spelling "connetced" to "connected" in pcf8574_keypad description in drivers/input/misc/Kconfig. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
- 23 Jan, 2012 7 commits
-
-
Rakesh Iyer authored
Enable keypress interrupt to support wakeup from low power state. Signed-off-by:
Rakesh Iyer <riyer@nvidia.com> Signed-off-by:
-
Rakesh Iyer authored
Add support for Tegra30 by correcting definitions. This is necessary to make driver useful in Tegra30. Signed-off-by:
Stephen Warren: <swarren@nvidia.com> Signed-off-by:
-
Mark Brown authored
We don't actually care if the device has been runtime suspended immediately so we can just drop the reference without waiting for any state change to be implemented. This may allow us to avoid some suspend/resume cycles and is a bit more friendly to the rest of the system. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Dmitry Torokhov authored
Convert the driver to standard spilt model arch-specific code registers platform device to which driver code can bind later. Also request IRQ immediately upon binding to the device instead of doing this when serio port is being opened. Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Dmitry Torokhov authored
Convert driver to use dev_pm_ops instead of legacy PM infrastructure. Also make 'open' a bool since it is really a boolean. Signed-off-by: -
Dmitry Torokhov authored
Also proper guard for system suspend/resume methods is CONFIG_PM_SLEEP, not CONFIG_PM. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Dmitry Torokhov authored
Because we are using platform_device_probe() to register the driver we do not need to assign driver's probe method. We also can mark ske_keypad_probe(), together with ske_keypad_chip_init(), as __init instead of __devinit. Acked-by:
-
- 05 Jan, 2012 7 commits
-
-
Naga Radhesh authored
This adds two missing kerneldoc entries for the TC3589x keypad driver. Signed-off-by:
Naga Radhesh <naga.radheshy@stericsson.com> Reviewed-by:
Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by:
-
Dmitry Torokhov authored
Acked-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
Instead of manually create and handler kernel thread switch to threaded IRQ and let kernel IRQ core manage thread for us. Acked-by:
-
Dmitry Torokhov authored
Let compiler figure out which ones makes most sense to inline. Acked-by:
-
Dmitry Torokhov authored
Add __devinit/__devexit sections annotations so parts of code could be discarded after completing driver initialization. Acked-by:
-
Dmitry Torokhov authored
So that it has proper symlink to the containing module in sysfs. Acked-by:
-
Dmitry Torokhov authored
Instead of using legacy PM interfaces switch to using dev_pm_ops. Acked-by:
-
- 30 Dec, 2011 8 commits
-
-
Dmitry Torokhov authored
Several protocol initialization routines can fail after they set up psmouse methods, such as reconnect and disconnect. This may lead to these stale methods used with different protocol that they were intended to be used for and may cause unpredictavle behavior and/or crashes. Make sure we start with a clean slate before executing each and every protocol detection and/or initialization routine. Reported-by:
Paul Fox <pgf@laptop.org> Acked-by:
Tai-hwa Liang <avatar@sentelic.com> Acked-by:
-
Dima Zavin authored
If there is a full packet in the buffer, and we overflow that buffer right after checking for that condition, it would have been possible for us to block indefinitely (rather, until the next full packet) even if the file was marked as O_NONBLOCK. Cc: Jeff Brown <jeffbrown@android.com> Signed-off-by:
Dima Zavin <dima@android.com> Signed-off-by:
-
Dima Zavin authored
Signed-off-by:
-
Dima Zavin authored
Without this, it was possible for the reader to get ahead of packet_head. If the input device generated a partial packet *right* after the reader got ahead, then we can get into a situation where the device is marked readable, but read always returns 0 until the next packet is finished (i.e a SYN is generated by the input driver). This situation can also happen if we overflow the buffer while a reader is trying to read an event out. Signed-off-by:
-
Jianchun Bian authored
This patch adds a driver for PIXCIR's I2C connected touchscreens. Signed-off-by:
Jianchun <jcbian@pixcir.com.cn> Acked-by:
-
Mark Brown authored
When runtime power management is enabled put the Samsung keypad driver into suspend mode with wakeups disabled whenever the device is open but a key is not actually been pressed. As well as saving a trivial amount of power this will support the use of SoC wide idle modes which put the entire device into a retention mode and use explicit wakeup sources to exit. Since not all of the interrupt controllers used with the driver support set_irq_wake() (though they all do the right thing) and there's a nasty WARN() when we disable wake after failing to enable it keep track of the current wake status from runtime PM and only disable wake if we managed to enable it; I'm not entirely sure why this doesn't affect the existing uses of the API in the driver. System suspend is unaffected as the driver core will runtime resume any suspended devices prior to system suspend. Signed-off-by:
-
Rakesh Iyer authored
Tegra kbc cannot detect exact keypress causing wakeup in interrupt mode. Allow wakeup keypress to be reported for certain platforms. Signed-off-by:
-
Olof Johansson authored
This adds a simple device tree binding to the tegra keyboard controller. Also, mark the default keymap as __devinitdata since it is not referenced after boot. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
- 28 Dec, 2011 1 commit
-
-
Heiko Stübner authored
Some displays from AUO have a so called in-cell touchscreen, meaning it is built directly into the display unit. Touchdata is gathered through PIXCIR Tango-ICs and processed in an Atmel ATmega168P with custom firmware. Communication between the host system and ATmega is done via I2C. Devices using this touch solution include the Dell Streak5 and the family of Qisda ebook readers. The driver reports single- and multi-touch events including touch area values. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
- 24 Dec, 2011 3 commits
-
-
Heikki Krogerus authored
This will improve the output of the sensor. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Heikki Krogerus authored
This also changes the devname parameter delivered to request_threaded_irq() from "mpu_int" to "mpu3050". Signed-off-by:
-
Olof Johansson authored
Adding invn,mpu3050 as the initial id. Signed-off-by:
-
- 23 Dec, 2011 1 commit
-
-
Tai-hwa Liang authored
- Add documentation for the Cx/Dx hardware release; - Fix wrong register offset for retrieving button information; - Document programming sequence for page register R/W; - Document a couple of supported gesture IDs. Signed-off-by:
-
