- 17 Apr, 2009 26 commits
-
-
Lior Dotan authored
Revert commit 2bb34736 This commit has been reported to cause problems: Mar 24 11:50:31 linuxdev kernel: BUG: sleeping function called from invalid context at mm/slub.c:1599 Mar 24 11:50:31 linuxdev kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 3251, name: avahi-daemon Cc: Lior Dotan <liodot@gmail.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Geert Uytterhoeven authored
m68k allmodconfig: | drivers/staging/stlc45xx/stlc45xx.c: In function 'stlc45xx_probe': | drivers/staging/stlc45xx/stlc45xx.c:2456: error: implicit declaration of function 'set_irq_type' | make[6]: *** [drivers/staging/stlc45xx/stlc45xx.o] Error 1 Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Arve Hjønnevåg authored
If a transaction that contains a file descriptor fails on a later object, the new file descriptor needs to be closed. If this is a binder file descriptor we would deadlock in flush. If there were no other references to the file at this point release would also be called. Signed-off-by:
Arve Hjønnevåg <arve@android.com> Signed-off-by:
-
Arve Hjønnevåg authored
If a thread is part of a transaction stack, it is only allowed to make another call if it was the target of the top transaction on the stack. Signed-off-by:
-
Arve Hjønnevåg authored
Signed-off-by:
-
Arve Hjønnevåg authored
This prevents breaking fget_light if a single threaded application allows incoming file descriptors (in replies or on nodes). Should also prevent inserting a file in the wrong files_struct if the receving process execs in the middle of a transaction (between task_get_unused_fd_flags and task_fd_install). Signed-off-by:
-
Arve Hjønnevåg authored
Check that datasize is not smaller than one flat_binder_object. Check that offsets are aligned. Check that offsets_size is aligned. Signed-off-by:
-
Arve Hjønnevåg authored
Only allow a binder file pointer to be mmapped once. The buffer management code cannot deal with more then one area. Also remove leftover mutex_unlock if mmap fails. Signed-off-by:
-
Arve Hjønnevåg authored
Staging: binder: Don't create two proc entries with the same name if the driver is opened twice in one process. Signed-off-by:
-
Arve Hjønnevåg authored
Many platforms do not support mappings without VM_EXEC. Signed-off-by:
-
Alan Cox authored
Minor fixes for tty layer stuff in this driver Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Daniele Napolitano authored
Signed-off-by:
Daniele Napolitano <dnax88@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Also remove unused variable. Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix branch tracer header tracing: Fix power tracer header
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Avoid printing sched_group::__cpu_power for default case tracing, sched: mark get_parent_ip() notrace
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kernel/softirq.c: fix sparse warning rcu: Make hierarchical RCU less IPI-happy
-
- 16 Apr, 2009 14 commits
-
-
H Hartley Sweeten authored
Fix sparse warning in kernel/softirq.c. warning: do-while statement is not a compound statement Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> LKML-Reference: <BD79186B4FD85F4B8E60E381CAEE1909015F9033@mi8nycmail19.Mi8.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86/uv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: UV BAU distribution and payload MMRs x86: UV: BAU partition-relative distribution map x86, uv: add Kconfig dependency on NUMA for UV systems x86: prevent /sys/firmware/sgi_uv from being created on non-uv systems x86, UV: Fix for nodes with memory and no cpus x86, UV: system table in bios accessed after unmap x86: UV BAU messaging timeouts x86: UV BAU and nodes with no memory
-
Gautham R Shenoy authored
Commit 46e0bb9c ("sched: Print sched_group::__cpu_power in sched_domain_debug") produces a messy dmesg output while attempting to print the sched_group::__cpu_power for each group in the sched_domain hierarchy. Fix this by avoid printing the __cpu_power for default cases. (i.e, __cpu_power == SCHED_LOAD_SCALE). [ Impact: reduce syslog clutter ] Reported-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Gautham R Shenoy <ego@in.ibm.com> Fixed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: Report 16/32bit PIO as best we can libata: use ATA_ID_CFA_* pata_legacy: fix no device fail path pata_hpt37x: fix HPT370 DMA timeouts libata: handle SEMB signature better
-
Hugh Dickins authored
Tetsuo Handa reports seeing the WARN_ON(current->mm == NULL) in security_vm_enough_memory(), when do_execve() is touching the target mm's stack, to set up its args and environment. Yes, a UMH_NO_WAIT or UMH_WAIT_PROC call_usermodehelper() spawns an mm-less kernel thread to do the exec. And in any case, that vm_enough_memory check when growing stack ought to be done on the target mm, not on the execer's mm (though apart from the warning, it only makes a slight tweak to OVERCOMMIT_NEVER behaviour). Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
This reverts commit f520360d. Tetsuo Handa, running a kernel with CONFIG_DEBUG_PAGEALLOC=y and CONFIG_UEVENT_HELPER_PATH=/sbin/hotplug, has been hitting RCU detected CPU stalls: it's been spinning in the loop where do_execve() counts up the args (but why wasn't fixup_exception working? dunno). The recent change, switching kobject_uevent_env() from UMH_WAIT_EXEC to UMH_NO_WAIT, is broken: the exec uses args on the local stack here, and an env which is kfreed as soon as call_usermodehelper() returns. It very much needs to wait for the exec to be done. An alternative would be to keep the UMH_NO_WAIT, and complicate the code to allocate and free these resources correctly? but no, as GregKH pointed out when making the commit, CONFIG_UEVENT_HELPER_PATH="" is a much better optimization - though some distros are still saying /sbin/hotplug in their .config, yet with no such binary in their initrd or their root. Reported-by:
Arjan van de Ven <arjan@linux.intel.com> Acked-by:
Will Newton <will.newton@gmail.com> Signed-off-by:
-
Alan Cox authored
The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Sergei Shtylyov authored
Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Tejun Heo authored
When pata_legacy can't detect any device, it unregisters the platform_device and fails detection. However, it forgets to detach ata host triggering weird failures as the host later gets freed by devres while still attached. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Sergei Shtylyov authored
The libata driver has copied the code from the IDE driver which caused a post 2.4.18 regression on many HPT370[A] chips -- DMA stopped to work completely, only causing timeouts. Now remove hpt370_bmdma_start() for good... Signed-off-by:
-
Tejun Heo authored
WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by:
David Haun <drhaun88@gmail.com> Reported-by:
Lars Wirzenius <liw@liw.fi> Reported-by:
Juan Manuel <jmcarranza@gmail.com> Signed-off-by:
-
Cliff Wickman authored
This patch correctly sets BAU memory mapped registers to point to the sending activation descriptor table and target payload table. The "Broadcast Assist Unit" is used for TLB shootdown in UV. The memory mapped registers that point to sending and receiving memory structures contain node numbers. In one case the __pa() function did not provide the node id of memory on blade zero in configurations where that id is nonzero. In another case, it was assumed that memory was allocated on the local node. That assumption is not true in a configuration in which the node has no memory. Tested on the UV hardware simulator. [ Impact: fix possible runtime crash due to incorrect TLB logic ] Signed-off-by:
Cliff Wickman <cpw@sgi.com> LKML-Reference: <E1LuR5Z-0007An-B8@eag09.americas.sgi.com> Signed-off-by:
-
Chris Mason authored
block_write_full_page doesn't allow the caller to control what happens when the IO is over. This adds a new call named block_write_full_page_endio so the buffer head end_io handler can be provided by the caller. This will be used by the ext3 data=guarded mode to do i_size updates in a workqueue based end_io handler. end_buffer_async_write is also exported so it can be called to do the dirty work of managing page writeback for the higher level end_io handler. Signed-off-by:
Chris Mason <chris.mason@oracle.com> Acked-by:
Theodore Tso <tytso@mit.edu> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Chris Mason authored
This wasn't exported before and is useful (used by the experimental ext3 data=guarded code) Signed-off-by:
-
