- 19 Jan, 2018 1 commit
-
-
Minchan Kim authored
James reported a bug in swap paging-in from his testing. It is that do_swap_page doesn't release locked page so system hang-up happens due to a deadlock on PG_locked. It was introduced by 0bcac06f ("mm, swap: skip swapcache for swapin of synchronous device") because I missed swap cache hit places to update swapcache variable to work well with other logics against swapcache in do_swap_page. This patch fixes it. Debugged by James Bottomley. Link: http://lkml.kernel.org/r/<1514407817.4169.4.camel@HansenPartnership.com> Link: http://lkml.kernel.org/r/20180102235606.GA19438@bboxSigned-off-by: Minchan Kim <minchan@kernel.org> Reported-by: James Bottomley <James.Bottomley@hansenpartnership.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 18 Jan, 2018 4 commits
-
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "These are the ARM BPF fixes as discussed earlier this week" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: net: bpf: clarify tail_call index ARM: net: bpf: fix LDX instructions ARM: net: bpf: fix register saving ARM: net: bpf: correct stack layout documentation ARM: net: bpf: move stack documentation ARM: net: bpf: fix stack alignment ARM: net: bpf: fix tail call jumps ARM: net: bpf: avoid 'bx' instruction on non-Thumb capable CPUs
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull two NVMe fixes from Jens Axboe: "Two important fixes for the sgl support for nvme that is new in this release" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-pci: take sglist coalescing in dma_map_sg into account nvme-pci: check segement valid for SGL use
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fix from Ulf Hansson: "sdhci-esdhc-imx: Fixup clock to make i.MX53 Loco (IMX53QSB) boot again" * tag 'mmc-v4.15-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fix from Linus Walleij: "This is the (hopefully) last GPIO fix for v4.15, fixing the bit fiddling in the MMIO GPIO driver. Again the especially endowed screwer-upper who has been open coding bit fiddling is yours truly" * tag 'gpio-v4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: mmio: Also read bits that are zero
-
- 17 Jan, 2018 21 commits
-
-
Christoph Hellwig authored
Some iommu implementations can merge physically and/or virtually contiguous segments inside sg_map_dma. The NVMe SGL support does not take this into account and will warn because of falling off a loop. Pass the number of mapped segments to nvme_pci_setup_sgls so that the SGL setup can take the number of mapped segments into account. Reported-by: Fangjian (Turing) <f.fangjian@huawei.com> Fixes: a7a7cbe3 ("nvme-pci: add SGL support") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@rimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Keith Busch authored
The driver needs to verify there is a payload with a command before seeing if it should use SGLs to map it. Fixes: 955b1b5a ("nvme-pci: move use_sgl initialization to nvme_init_iod()") Reported-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de> Reviewed-by: Paul Menzel <pmenzel+linux-nvme@molgen.mpg.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - A rather involved set of memory hardware encryption fixes to support the early loading of microcode files via the initrd. These are larger than what we normally take at such a late -rc stage, but there are two mitigating factors: 1) much of the changes are limited to the SME code itself 2) being able to early load microcode has increased importance in the post-Meltdown/Spectre era. - An IRQ vector allocator fix - An Intel RDT driver use-after-free fix - An APIC driver bug fix/revert to make certain older systems boot again - A pkeys ABI fix - TSC calibration fixes - A kdump fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/vector: Fix off by one in error path x86/intel_rdt/cqm: Prevent use after free x86/mm: Encrypt the initrd earlier for BSP microcode update x86/mm: Prepare sme_encrypt_kernel() for PAGE aligned encryption x86/mm: Centralize PMD flags in sme_encrypt_kernel() x86/mm: Use a struct to reduce parameters for SME PGD mapping x86/mm: Clean up register saving in the __enc_copy() assembly code x86/idt: Mark IDT tables __initconst Revert "x86/apic: Remove init_bsp_APIC()" x86/mm/pkeys: Fix fill_sig_info_pkey x86/tsc: Print tsc_khz, when it differs from cpu_khz x86/tsc: Fix erroneous TSC rate on Skylake Xeon x86/tsc: Future-proof native_calibrate_tsc() kdump: Write the correct address of mem_section into vmcoreinfo
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "A delayacct statistics correctness fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: delayacct: Account blkio completion on the correct task
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Ingo Molnar: "An Intel RAPL events fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Fix Haswell and Broadwell server RAPL event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Two futex fixes: a input parameters robustness fix, and futex race fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Prevent overflow by strengthen input validation futex: Avoid violating the 10th rule of futex
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 pti bits and fixes from Thomas Gleixner: "This last update contains: - An objtool fix to prevent a segfault with the gold linker by changing the invocation order. That's not just for gold, it's a general robustness improvement. - An improved error message for objtool which spares tearing hairs. - Make KASAN fail loudly if there is not enough memory instead of oopsing at some random place later - RSB fill on context switch to prevent RSB underflow and speculation through other units. - Make the retpoline/RSB functionality work reliably for both Intel and AMD - Add retpoline to the module version magic so mismatch can be detected - A small (non-fix) update for cpufeatures which prevents cpu feature clashing for the upcoming extra mitigation bits to ease backporting" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: module: Add retpoline tag to VERMAGIC x86/cpufeature: Move processor tracing out of scattered features objtool: Improve error message for bad file argument objtool: Fix seg fault with gold linker x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macros x86/retpoline: Fill RSB on context switch for affected CPUs x86/kasan: Panic if there is not enough memory to boot
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A one-liner fix which prevents deferrable timers becoming stale when the system does not switch into NOHZ mode" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Unconditionally check deferrable base
-
Russell King authored
As per 90caccdd ("bpf: fix bpf_tail_call() x64 JIT"), the index used for array lookup is defined to be 32-bit wide. Update a misleading comment that suggests it is 64-bit wide. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
When the source and destination register are identical, our JIT does not generate correct code, which leads to kernel oopses. Fix this by (a) generating more efficient code, and (b) making use of the temporary earlier if we will overwrite the address register. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
When an eBPF program tail-calls another eBPF program, it enters it after the prologue to avoid having complex stack manipulations. This can lead to kernel oopses, and similar. Resolve this by always using a fixed stack layout, a CPU register frame pointer, and using this when reloading registers before returning. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
The stack layout documentation incorrectly suggests that the BPF JIT scratch space starts immediately below BPF_FP. This is not correct, so let's fix the documentation to reflect reality. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
Move the stack documentation towards the top of the file, where it's relevant for things like the register layout. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
As per 2dede2d8 ("ARM EABI: stack pointer must be 64-bit aligned after a CPU exception") the stack should be aligned to a 64-bit boundary on EABI systems. Ensure that the eBPF JIT appropraitely aligns the stack. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
When a tail call fails, it is documented that the tail call should continue execution at the following instruction. An example tail call sequence is: 12: (85) call bpf_tail_call#12 13: (b7) r0 = 0 14: (95) exit The ARM assembler for the tail call in this case ends up branching to instruction 14 instead of instruction 13, resulting in the BPF filter returning a non-zero value: 178: ldr r8, [sp, #588] ; insn 12 17c: ldr r6, [r8, r6] 180: ldr r8, [sp, #580] 184: cmp r8, r6 188: bcs 0x1e8 18c: ldr r6, [sp, #524] 190: ldr r7, [sp, #528] 194: cmp r7, #0 198: cmpeq r6, #32 19c: bhi 0x1e8 1a0: adds r6, r6, #1 1a4: adc r7, r7, #0 1a8: str r6, [sp, #524] 1ac: str r7, [sp, #528] 1b0: mov r6, #104 1b4: ldr r8, [sp, #588] 1b8: add r6, r8, r6 1bc: ldr r8, [sp, #580] 1c0: lsl r7, r8, #2 1c4: ldr r6, [r6, r7] 1c8: cmp r6, #0 1cc: beq 0x1e8 1d0: mov r8, #32 1d4: ldr r6, [r6, r8] 1d8: add r6, r6, #44 1dc: bx r6 1e0: mov r0, #0 ; insn 13 1e4: mov r1, #0 1e8: add sp, sp, #596 ; insn 14 1ec: pop {r4, r5, r6, r7, r8, sl, pc} For other sequences, the tail call could end up branching midway through the following BPF instructions, or maybe off the end of the function, leading to unknown behaviours. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
Avoid the 'bx' instruction on CPUs that have no support for Thumb and thus do not implement this instruction by moving the generation of this opcode to a separate function that selects between: bx reg and mov pc, reg according to the capabilities of the CPU. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-
Thomas Gleixner authored
Keith reported the following warning: WARNING: CPU: 28 PID: 1420 at kernel/irq/matrix.c:222 irq_matrix_remove_managed+0x10f/0x120 x86_vector_free_irqs+0xa1/0x180 x86_vector_alloc_irqs+0x1e4/0x3a0 msi_domain_alloc+0x62/0x130 The reason for this is that if the vector allocation fails the error handling code tries to free the failed vector as well, which causes the above imbalance warning to trigger. Adjust the error path to handle this correctly. Fixes: b5dc8e6c ("x86/irq: Use hierarchical irqdomain to manage CPU interrupt vectors") Reported-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Keith Busch <keith.busch@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161217300.1823@nanos
-
Thomas Gleixner authored
intel_rdt_iffline_cpu() -> domain_remove_cpu() frees memory first and then proceeds accessing it. BUG: KASAN: use-after-free in find_first_bit+0x1f/0x80 Read of size 8 at addr ffff883ff7c1e780 by task cpuhp/31/195 find_first_bit+0x1f/0x80 has_busy_rmid+0x47/0x70 intel_rdt_offline_cpu+0x4b4/0x510 Freed by task 195: kfree+0x94/0x1a0 intel_rdt_offline_cpu+0x17d/0x510 Do the teardown first and then free memory. Fixes: 24247aee ("x86/intel_rdt/cqm: Improve limbo list processing") Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ravi Shankar <ravi.v.shankar@intel.com> Cc: Peter Zilstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: "Roderick W. Smith" <rod.smith@canonical.com> Cc: 1733662@bugs.launchpad.net Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801161957510.2366@nanos
-
Andi Kleen authored
Add a marker for retpoline to the module VERMAGIC. This catches the case when a non RETPOLINE compiled module gets loaded into a retpoline kernel, making it insecure. It doesn't handle the case when retpoline has been runtime disabled. Even in this case the match of the retcompile status will be enforced. This implies that even with retpoline run time disabled all modules loaded need to be recompiled. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: rusty@rustcorp.com.au Cc: arjan.van.de.ven@intel.com Cc: jeyu@kernel.org Cc: torvalds@linux-foundation.org Link: https://lkml.kernel.org/r/20180116205228.4890-1-andi@firstfloor.org
-
Paolo Bonzini authored
Processor tracing is already enumerated in word 9 (CPUID[7,0].EBX), so do not duplicate it in the scattered features word. Besides being more tidy, this will be useful for KVM when it presents processor tracing to the guests. KVM selects host features that are supported by both the host kernel (depending on command line options, CPU errata, or whatever) and KVM. Whenever a full feature word exists, KVM's code is written in the expectation that the CPUID bit number matches the X86_FEATURE_* bit number, but this is not the case for X86_FEATURE_INTEL_PT. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luwei Kang <luwei.kang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/1516117345-34561-1-git-send-email-pbonzini@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "We had a few more items creep up over the last week. Given we are in -rc8, these are obviously limited to bugs that have a big downside and for which we are certain of the fix. The first is a straight up oops bug that all you have to do is read the code to see it's a guaranteed 100% oops bug. The second is a use-after-free issue. We get away lucky if the queue we are shutting down is empty, but if it isn't, we can end up oopsing. We really need to drain the queue before destroying it. The final one is an issue with bad user input causing us to access our port array out of bounds. While fixing the array out of bounds issue, it was noticed that the original code did the same thing twice (the call to rdma_ah_set_port_num()), so its removal is not balanced by a readd elsewhere, it was already where it needed to be in addition to where it didn't need to be. Summary: - Oops fix in hfi1 driver - use-after-free issue in iser-target - use of user supplied array index without proper checking" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Fix out-of-bound access while querying AH IB/hfi1: Prevent a NULL dereference iser-target: Fix possible use-after-free in connection establishment error
-
- 16 Jan, 2018 14 commits
-
-
Linus Walleij authored
The code for .get_multiple() has bugs: 1. The simple .get_multiple() just reads a register, masks it and sets the return value. This is not correct: we only want to assign values (whether 0 or 1) to the bits that are set in the mask. Fix this by using &= ~mask to clear all bits in the mask and then |= val & mask to set the corresponding bits from the read. 2. The bgpio_get_multiple_be() call has a similar problem: it uses the |= operator to set the bits, so only the bits in the mask are affected, but it misses to clear all returned bits from the mask initially, so some bits will be returned erroneously set to 1. 3. The bgpio_get_set_multiple() again fails to clear the bits from the mask. 4. find_next_bit() wasn't handled correctly, use a totally different approach for one function and change the other function to follow the design pattern of assigning the first bit to -1, then use bit + 1 in the for loop and < num_iterations as break condition. Fixes: 80057cb4 ("gpio-mmio: Use the new .get_multiple() callback") Cc: Bartosz Golaszewski <brgl@bgdev.pl> Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Two read past end of buffer fixes in AF_KEY, from Eric Biggers. 2) Memory leak in key_notify_policy(), from Steffen Klassert. 3) Fix overflow with bpf arrays, from Daniel Borkmann. 4) Fix RDMA regression with mlx5 due to mlx5 no longer using pci_irq_get_affinity(), from Saeed Mahameed. 5) Missing RCU read locking in nl80211_send_iface() when it calls ieee80211_bss_get_ie(), from Dominik Brodowski. 6) cfg80211 should check dev_set_name()'s return value, from Johannes Berg. 7) Missing module license tag in 9p protocol, from Stephen Hemminger. 8) Fix crash due to too small MTU in udp ipv6 sendmsg, from Mike Maloney. 9) Fix endless loop in netlink extack code, from David Ahern. 10) TLS socket layer sets inverted error codes, resulting in an endless loop. From Robert Hering. 11) Revert openvswitch erspan tunnel support, it's mis-designed and we need to kill it before it goes into a real release. From William Tu. 12) Fix lan78xx failures in full speed USB mode, from Yuiko Oshino. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) net, sched: fix panic when updating miniq {b,q}stats qed: Fix potential use-after-free in qed_spq_post() nfp: use the correct index for link speed table lan78xx: Fix failure in USB Full Speed sctp: do not allow the v4 socket to bind a v4mapped v6 address sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf sctp: reinit stream if stream outcnt has been change by sinit in sendmsg ibmvnic: Fix pending MAC address changes netlink: extack: avoid parenthesized string constant warning ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY net: Allow neigh contructor functions ability to modify the primary_key sh_eth: fix dumping ARSTR Revert "openvswitch: Add erspan tunnel support." net/tls: Fix inverted error codes to avoid endless loop ipv6: ip6_make_skb() needs to clear cork.base.dst sctp: avoid compiler warning on implicit fallthru net: ipv4: Make "ip route get" match iif lo rules again. netlink: extack needs to be reset each time through loop tipc: fix a memory leak in tipc_nl_node_get_link() ipv6: fix udpv6 sendmsg crash caused by too small MTU ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few small last-minute fixes that should sneak into 4.15: - remove a spurious WARN_ON() triggered by syzkaller - fix for ioctl races in ALSA sequencer - two trivial HD-audio fixup entries" * tag 'sound-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Make ioctls race-free ALSA: pcm: Remove yet superfluous WARN_ON() ALSA: hda - Apply the existing quirk to iMac 14,1 ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Bring back context level recursive protection in ring buffer. The simpler counter protection failed, due to a path when tracing with trace_clock_global() as it could not be reentrant and depended on the ring buffer recursive protection to keep that from happening. - Prevent branch profiling when FORTIFY_SOURCE is enabled. It causes 50 - 60 MB in warning messages. Branch profiling should never be run on production systems, so there's no reason that it needs to be enabled with FORTIFY_SOURCE. * tag 'trace-v4.15-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Prevent PROFILE_ALL_BRANCHES when FORTIFY_SOURCE=y ring-buffer: Bring back context level recursive checks
-
Daniel Borkmann authored
While working on fixing another bug, I ran into the following panic on arm64 by simply attaching clsact qdisc, adding a filter and running traffic on ingress to it: [...] [ 178.188591] Unable to handle kernel read from unreadable memory at virtual address 810fb501f000 [ 178.197314] Mem abort info: [ 178.200121] ESR = 0x96000004 [ 178.203168] Exception class = DABT (current EL), IL = 32 bits [ 178.209095] SET = 0, FnV = 0 [ 178.212157] EA = 0, S1PTW = 0 [ 178.215288] Data abort info: [ 178.218175] ISV = 0, ISS = 0x00000004 [ 178.222019] CM = 0, WnR = 0 [ 178.224997] user pgtable: 4k pages, 48-bit VAs, pgd = 0000000023cb3f33 [ 178.231531] [0000810fb501f000] *pgd=0000000000000000 [ 178.236508] Internal error: Oops: 96000004 [#1] SMP [...] [ 178.311855] CPU: 73 PID: 2497 Comm: ping Tainted: G W 4.15.0-rc7+ #5 [ 178.319413] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017 [ 178.326887] pstate: 60400005 (nZCv daif +PAN -UAO) [ 178.331685] pc : __netif_receive_skb_core+0x49c/0xac8 [ 178.336728] lr : __netif_receive_skb+0x28/0x78 [ 178.341161] sp : ffff00002344b750 [ 178.344465] x29: ffff00002344b750 x28: ffff810fbdfd0580 [ 178.349769] x27: 0000000000000000 x26: ffff000009378000 [...] [ 178.418715] x1 : 0000000000000054 x0 : 0000000000000000 [ 178.424020] Process ping (pid: 2497, stack limit = 0x000000009f0a3ff4) [ 178.430537] Call trace: [ 178.432976] __netif_receive_skb_core+0x49c/0xac8 [ 178.437670] __netif_receive_skb+0x28/0x78 [ 178.441757] process_backlog+0x9c/0x160 [ 178.445584] net_rx_action+0x2f8/0x3f0 [...] Reason is that sch_ingress and sch_clsact are doing mini_qdisc_pair_init() which sets up miniq pointers to cpu_{b,q}stats from the underlying qdisc. Problem is that this cannot work since they are actually set up right after the qdisc ->init() callback in qdisc_create(), so first packet going into sch_handle_ingress() tries to call mini_qdisc_bstats_cpu_update() and we therefore panic. In order to fix this, allocation of {b,q}stats needs to happen before we call into ->init(). In net-next, there's already such option through commit d59f5ffa ("net: sched: a dflt qdisc may be used with per cpu stats"). However, the bug needs to be fixed in net still for 4.15. Thus, include these bits to reduce any merge churn and reuse the static_flags field to set TCQ_F_CPUSTATS, and remove the allocation from qdisc_create() since there is no other user left. Prashant Bhole ran into the same issue but for net-next, thus adding him below as well as co-author. Same issue was also reported by Sandipan Das when using bcc. Fixes: 46209401 ("net: core: introduce mini_Qdisc and eliminate usage of tp->q for clsact fastpath") Reference: https://lists.iovisor.org/pipermail/iovisor-dev/2018-January/001190.htmlReported-by: Sandipan Das <sandipan@linux.vnet.ibm.com> Co-authored-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Co-authored-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roland Dreier authored
We need to check if p_ent->comp_mode is QED_SPQ_MODE_EBLOCK before calling qed_spq_add_entry(). The test is fine is the mode is EBLOCK, but if it isn't then qed_spq_add_entry() might kfree(p_ent). Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
sts variable is holding link speed as well as state. We should be using ls to index into ls_to_ethtool. Fixes: 265aeb51 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuiko Oshino authored
Fix initialize the uninitialized tx_qlen to an appropriate value when USB Full Speed is used. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2018-01-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== More fixes: * hwsim: - properly flush deletion works at module unload - validate # of channels passed from userspace * cfg80211: - fix RCU locking regression - initialize on-stack channel data for nl80211 event - check dev_set_name() return value ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
The check in sctp_sockaddr_af is not robust enough to forbid binding a v4mapped v6 addr on a v4 socket. The worse thing is that v4 socket's bind_verify would not convert this v4mapped v6 addr to a v4 addr. syzbot even reported a crash as the v4 socket bound a v6 addr. This patch is to fix it by doing the common sa.sa_family check first, then AF_INET check for v4mapped v6 addrs. Fixes: 7dab83de ("sctp: Support ipv6only AF_INET6 sockets.") Reported-by: syzbot+7b7b518b1228d2743963@syzkaller.appspotmail.com Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
After commit cea0cc80 ("sctp: use the right sk after waking up from wait_buf sleep"), it may change to lock another sk if the asoc has been peeled off in sctp_wait_for_sndbuf. However, the asoc's new sk could be already closed elsewhere, as it's in the sendmsg context of the old sk that can't avoid the new sk's closing. If the sk's last one refcnt is held by this asoc, later on after putting this asoc, the new sk will be freed, while under it's own lock. This patch is to revert that commit, but fix the old issue by returning error under the old sk's lock. Fixes: cea0cc80 ("sctp: use the right sk after waking up from wait_buf sleep") Reported-by: syzbot+ac6ea7baa4432811eb50@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
After introducing sctp_stream structure, sctp uses stream->outcnt as the out stream nums instead of c.sinit_num_ostreams. However when users use sinit in cmsg, it only updates c.sinit_num_ostreams in sctp_sendmsg. At that moment, stream->outcnt is still using previous value. If it's value is not updated, the sinit_num_ostreams of sinit could not really work. This patch is to fix it by updating stream->outcnt and reiniting stream if stream outcnt has been change by sinit in sendmsg. Fixes: a8386317 ("sctp: prepare asoc stream for stream reconf") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
Due to architecture limitations, the IBM VNIC client driver is unable to perform MAC address changes unless the device has "logged in" to its backing device. Currently, pending MAC changes are handled before login, resulting in an error and failure to change the MAC address. Moving that chunk to the end of the ibmvnic_login function, when we are sure that it was successful, fixes that. The MAC address can be changed when the device is up or down, so only check if the device is in a "PROBED" state before setting the MAC address. Fixes: c26eba03 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Josh Snyder authored
Before commit: e33a9bba ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler") delayacct_blkio_end() was called after context-switching into the task which completed I/O. This resulted in double counting: the task would account a delay both waiting for I/O and for time spent in the runqueue. With e33a9bba, delayacct_blkio_end() is called by try_to_wake_up(). In ttwu, we have not yet context-switched. This is more correct, in that the delay accounting ends when the I/O is complete. But delayacct_blkio_end() relies on 'get_current()', and we have not yet context-switched into the task whose I/O completed. This results in the wrong task having its delay accounting statistics updated. Instead of doing that, pass the task_struct being woken to delayacct_blkio_end(), so that it can update the statistics of the correct task. Signed-off-by: Josh Snyder <joshs@netflix.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> Cc: Brendan Gregg <bgregg@netflix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-block@vger.kernel.org Fixes: e33a9bba ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler") Link: http://lkml.kernel.org/r/1513613712-571-1-git-send-email-joshs@netflix.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-