into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into kroah.com:/home/greg/linux/BK/i2c-2.6

Check netlink socket being non NULL in error return path.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/pci-2.6

into kroah.com:/home/greg/linux/BK/usb-2.6

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into iguana.be:/home/wim/BitKeeper/projects/linux-2.6-watchdog

This is a debug entry that isn't of much use to the generic user or on a
production system. Additionally it can also easy overflow the sysfs
PAGE_SIZE limitation, if you have many processes doing io. So kill the
entry.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

If we're waiting on a futex and we are woken up, it's either because
someone did FUTEX_WAKE, we timed out, or have been signalled.  However, the
WARN_ON(!signal_pending(current)) test is overzealous: with threads (a
common use of futexes), we share the signal handler and the other
thread might get to the signal before us.  In addition, exit_notify()
can do a recalc_sigpending_tsk() on us, which will then clear our
TIF_SIGPENDING bit, making signal_pending(current) return false.

Returning EINTR is a little strange in this case, since this thread
hasn't handled a signal.  However, with threads it's the best we can
do: there's always a race where another thread could have been the
actual one to handle the signal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to hold refcnt before releasing rt6_lock.
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/net-2.6

add a module parameter to swap the axes. many displays need this...
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This fixes http://bugme.osdl.org/show_bug.cgi?id=3813Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Fixes from Koen Martens to update the 
register definitions for the MMC/SD/SDIO interface,
tidied up for release with extra notes on what has
been depreceated in later silicon.

Signed-off-by: Koen Martens
Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Patch from Ben Dooks

If one of the devices fails to register, do not
remove any registered devices and continue registering
in case any more devices register.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

This patch cleans the macintoch/therm_* drivers a bit. It removes
useless IDs, cleans names (no white space), some coding style fixes as
well, etc. It's exactly the same as what I posted yesterday as a
candidate fix to bug #3823:
http://bugzilla.kernel.org/show_bug.cgi?id=3823

Although it isn't the proper fix for that bug, as you underlined, this
still sounds like a sane set of cleanups for these drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This simple patch adds support for the nForce2 Ultra 400 to i2c-nforce2.
I just made a similar update on the 2.4/CVS version of the driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

I found only this one. Next time I'll try to make better grep
expressions :^)

[I2C] i2c-ite: get rid of cli()/sti()
Signed-off-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Indentiation and logic suggest this was wrong.
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes an an "off-by-one" error found in the CCISS_GETLUNIFO
ioctl in the cciss driver.  It is cycling through the part table of the
gendisk structure which is a zero-based array, not a one-based array.  This
often causes an oops when referencing the out-of-bounds element.

Signed-off by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The field info->modelist is initialized during register_framebuffer.  This
field is also referred to in fb_set_var().  Thus a call to fb_set_var()
before register_framebuffer() will cause a crash.  A few drivers do this,
notably controlfb.  (This might fix reports of controlfb crashing in
powermacs).
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Patch from Petr Vandrovec <vandrove@vc.cvut.cz>

Recently I've observed problems with IDE disks while running UP kernel on
x86-64 - it complained a lot about lost irq from hda/hdc.  I tracked
problem down to the problem that at enable_irq() code calls
hw_resend_irq(), but on x86-64 hw_resend_irq() does something useful only
when CONFIG_SMP is defined, on UP systems it does nothing.

Due to this IRQ is lost - and when IDE retries command, it can again happen
that IRQ is delivered before IDE code does enable_irq(), and again and
again, unless due to drive being lazy finally once kernel does enable_irq()
before drive prepares its answer, and things move forward ...  to next lost
IRQ.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix permissions on module parameters exported via sysfs.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The accounting of shmctl() SHM_LOCK memory locks against the user
structure is broken.  The check of the size of the to-be-locked region
is based on the size of the segment as specified when it was created by
shmget() (this size is *not* rounded up to a page boundary).

Fix it by rounding the size properlt.  Also, tune up the spinlock
coverage in there a little.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Revert my version of this fix and apply Scott's version, which was acked by
the e100 maintainers.

Also, initialise the spinlocks before calling e100_hw_reset(), so things don't
instantly deadlock on SMP.
Signed-off-by: Scott Feldman <sfeldma@pobox.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=128916Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Disable mmconfig on AMD CPUs.

This patch fixes various problems on PCI Express boards, like the
Nforce4. They have a MCFG table in ACPI, but not all devices can be
accessed using MMCONFIG.  e.g. the CPU builtin PCI devices in the A64
Northbridge can't.  Linux happily uses mmconfig for all PCI devices and
that cause failures and memory corruption.

Right solution apparently is to get more information from MCFG which is
supposed to tell for which busses mmconfig is legal and for which ones
not. But that would be a much more complicated patch and I don't have
a specification of this enhanced table.

This patch just disable MMCONFIG on all AMD CPUs. This is a kludge,
but works around the problem for now.

Patch for both i386 and x86-64
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add sysfs file to map PCI busses to cpus

Export the information from pcibus_to_cpumask() to sysfs. This
is useful for some user space programs who want to optimize their IO
using O_DIRECT.

There was some indecision on whether it's more useful to report
cpus or nodes here. In the end cpus was chosen because that is
what the existing macros report.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add comment/NOTE that USB_STORAGE probably needs BLK_DEV_SD also.
Add a few device types to help text and reformat it.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>