Now that the SPDX tag is in all comedi files, that identifies the
license in a specific and legally-defined manner.  So the extra GPL text
wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the SPDX tag is in all comedi files, that identifies the
license in a specific and legally-defined manner.  So the extra GPL text
wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/staging/comedi files files with the correct SPDX
license identifier based on the license text in the file itself.  The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

error could be unitialized when it is used as a return value in
fsl_mc_device_add().  So fix up the warning by properly setting it.

Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace strcmp() based device type checks with the standard device
model type.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The MC bus has different types of devices and this is supported by
device model. This patch adds initial support for device types
(defines them, adds helpers and sets the device type).
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A lot of error checks are doubled by debug WARN_ONs. Given that the
driver was thoroughly debugged and is in a stable state, it's time to
drop them.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These WARN_ONs shouldn't trigger unless something went very wrong.
Since the driver is in a stable state let's remove these debug
WARN_ONs.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

No need to use EXPORT_SYMBOL() so switch to the GPL variant.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bus driver is mixing EXPORT_SYMBOL()/EXPORT_SYMBOL_GPL() usage.
Change it to consistently use EXPORT_SYMBOL_GPL().
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These couple of functions are not yet used so lets remove them
for now and add them back when/if needed.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions are only used within this driver so no need for
EXPORT_SYMBOL().
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There's an unfinished implementation of reference counting for dpaa2_io
structure using atomics. Since it's unused lets remove it for now and,
if needed at a later time, make use of krefs instead of rolling our
own refcounting.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Couple of API functions are not used so lets drop them together with
the associated structures and defines.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The early initialization of val is redundant as the value is never
read and is updated inside a for-loop. Remove the initialization
and move the declaration and initialization to the for-loop scope.
Cleans up clang warning:

drivers/staging/comedi/drivers/usbdux.c:812:15: warning: Value stored
to 'val' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable tmp.

This makes the code easier to read and maintain.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

do_gettimeofday() is deprecated and slower than necessary for the purpose
of reading the seconds. This changes rtl_op_suspend/resume to use
ktime_get_real_seconds() instead, which is simpler and avoids confusion
about whether it is y2038-safe or not.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable ul_enc_algo is being initialized with a value that is never
read, it is being set again in the following switch statements in
all of the case and default paths. Hence the unitialization is
redundant and can be removed.  Cleans up two clang warnings:

Value stored to 'ul_enc_algo' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the issue:

CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt
Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The break statement is indented one level too many, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The CC_REG_NAME macro is unused. Drop it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor cc_map_aead_request() to use local vars for addresses
for better readability of code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the driver would try to queue commands to the HW FIFO but ran out of
slots it would use msleep as a delay until the FIFO would clear. This is
messy and not accurate.

Replace the msleep with a proper completion on the event of command
completion which should indicate at least one slot is free.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Field monitor_null_cycles of struct drvdata was not being used.
Remove it.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unneeded wrapper function to simplify code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the too long  SSI_MAX_HASH_OPAD_TMP_KEYS_SIZE
to SSI_MAX_OPAD_KEYS_SIZE for better code readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the insanely long ssi_ahash_get_larval_digest_sram_addr() func
to cc_larval_digest_addr() for better code readability
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor the queue handling loop using local variables for better
code readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove no longer definitions of enums and forward declaration of functions
dealing with sysfs interface of the long removed ccree cycle counter.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ccree driver did not adhere to the kernel max 80 chars per line limit
making the code hard to follow. Fix this by breaking long lines and
in some cases, moving comments to a separate line from code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace GET_DMA_BUFFER_TYPE with an inline function
variant with type checking.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

After commit b2b49ccb
("PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected")
PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix code ident not following the coding style.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make help string static const
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Document spinlock usage to protect against concurrent
access to HW register which must occur a single
request at a time.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace open coded register writing loop with a for.
Further simplify code by using a local var to precompute
the register address for readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver was issuing a write memory barrier per each
HW descriptor written but these descriptors are written
in groups and we really only need one per group.

White at it, document memory barrier reason.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove uneeded cast from writel_relaxed parameter.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove uneeded empty lines that crept in to code.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move logical continuations to first line for readability.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>