- 23 Feb, 2020 2 commits
-
-
Jani Nikula authored
Ensure const data goes to rodata. Fixes: ff2cd863 ("drm/i915: Correctly map DBUF slices to pipes") Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219154542.19574-1-jani.nikula@intel.com
-
Jani Nikula authored
Pair the irq install and uninstall in the same layer. There are no functional changes in the happy day scenario. The cleanup paths are currently a mess though. Note that modeset probe pre-irq + post-irq install are matched by modeset driver remove pre-irq + post-irq uninstall, together, but not independently. They are not symmetric pairs. v2: don't add a new probe failure point here Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
- 22 Feb, 2020 3 commits
-
-
Colin Ian King authored
Variable dw is being initialized with a value that is never read, it is assigned a new value later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
Upon unregistering the user interface, we mark the GPU as wedged to ensure we push no new work to the GPU, and to flush all current work from the GPU. Move this call to the GT backend. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221235135.2883006-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We mark the vma as active while binding it in order to protect outselves from being shrunk under mempressure. This only works if we are strict in not attempting to shrink active objects. <6> [472.618968] Workqueue: events_unbound fence_work [i915] <4> [472.618970] Call Trace: <4> [472.618974] ? __schedule+0x2e5/0x810 <4> [472.618978] schedule+0x37/0xe0 <4> [472.618982] schedule_preempt_disabled+0xf/0x20 <4> [472.618984] __mutex_lock+0x281/0x9c0 <4> [472.618987] ? mark_held_locks+0x49/0x70 <4> [472.618989] ? _raw_spin_unlock_irqrestore+0x47/0x60 <4> [472.619038] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619084] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619122] i915_vma_unbind+0xae/0x110 [i915] <4> [472.619165] i915_gem_object_unbind+0x1dc/0x400 [i915] <4> [472.619208] i915_gem_shrink+0x328/0x660 [i915] <4> [472.619250] ? i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619282] i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619325] vm_alloc_page.constprop.25+0x1aa/0x240 [i915] <4> [472.619330] ? rcu_read_lock_sched_held+0x4d/0x80 <4> [472.619363] ? __alloc_pd+0xb/0x30 [i915] <4> [472.619366] ? module_assert_mutex_or_preempt+0xf/0x30 <4> [472.619368] ? __module_address+0x23/0xe0 <4> [472.619371] ? is_module_address+0x26/0x40 <4> [472.619374] ? static_obj+0x34/0x50 <4> [472.619376] ? lockdep_init_map+0x4d/0x1e0 <4> [472.619407] setup_page_dma+0xd/0x90 [i915] <4> [472.619437] alloc_pd+0x29/0x50 [i915] <4> [472.619470] __gen8_ppgtt_alloc+0x443/0x6b0 [i915] <4> [472.619503] gen8_ppgtt_alloc+0xd7/0x300 [i915] <4> [472.619535] ppgtt_bind_vma+0x2a/0xe0 [i915] <4> [472.619577] __vma_bind+0x26/0x40 [i915] <4> [472.619611] fence_work+0x1c/0x90 [i915] <4> [472.619617] process_one_work+0x26a/0x620 Fixes: 2850748e ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221221818.2861432-1-chris@chris-wilson.co.uk
-
- 21 Feb, 2020 6 commits
-
-
Matt Roper authored
We need to explicitly set the TLB Request Timer initial value in the BW_BUDDY registers to 0x8 rather than relying on the hardware default. v2: Apply missing REG_FIELD_PREP to ensure 0x8 is placed in the correct bits during the rmw. (Jose) Bspec: 52890 Bspec: 50044 Fixes: 3fa01d64 ("drm/i915/tgl: Program BW_BUDDY registers during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:José Roberto de Souza <jose.souza@intel.com>
-
Chris Wilson authored
As there is a delay before we pin a vma, there is an opportunity for another thread to have closed the vm and its vma (including us). Check as soon as we acquire the vm->mutex and know the vm/vma is stable. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1291Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221121940.2741563-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Call cond_resched() between each freed object in case we have a really, really long list, and we don't want to block normal processes. Signed-off-by:
-
Michał Winiarski authored
Attempting to bind / unbind module from devices where we have both integrated and discreete GPU handled by i915, will cause us to try and double free the global state, hitting null ptr deref in free_event_attributes. Let's move it to i915_pmu. Fixes: 05488673 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Michał Winiarski authored
Attempting to bind / unbind module from devices where we have both integrated and discreete GPU handled by i915 can lead to leaks and warnings from cpuhp: Error: Removing state XXX which has instances left. Let's move the state to i915_pmu. Fixes: 05488673 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by:
-
Wambui Karuga authored
Manual conversion of instances of printk based drm logging macros to the struct drm_device based logging macros in i915/i915_perf.c. Also involves extraction of the struct drm_i915_private device from various intel types for use in the macros. Instances of the DRM_DEBUG printk macro were not converted due to the lack of an analogous struct drm_device based logging macro. v2: remove instances of DRM_DEBUG that were converted. References: https://lists.freedesktop.org/archives/dri-devel/2020-January/253381.htmlSigned-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by:
-
- 20 Feb, 2020 22 commits
-
-
Matt Roper authored
On gen11 we only needed to program MBus credits into MBUS_ABOX_CTL during display initialization, but on gen12 we're now supposed to program the same values into MBUS_ABOX1_CTL and MBUS_ABOX2_CTL as well. v2: - Program registers with rmw to preserve contents of unrelated bits. - Switch to the new display uncore helpers. Bspec: 49213 Bspec: 50096 Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com>
-
Matt Roper authored
It wasn't terribly clear from the bspec's wording, but after discussion with the hardware folks, it turns out that we need to preserve the pre-existing contents of the MBUS ABOX control register when initializing a few specific bits. Bspec: 49213 Bspec: 50096 Fixes: 4cb4585e ("drm/i915/icl: initialize MBus during display init") Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We have to write quite a few registers when programming the pipe scaler. Let's use intel_de_write_fw() for these to reduce the lockdep overhead a bit. All plane registers (including plane scaler) already do this. We already had a few accidental intel_de_write_fw() in there. Signed-off-by:
-
Ville Syrjälä authored
Make the PFIT_PIPE stuff less ugly via parametrization. Signed-off-by:
-
Ville Syrjälä authored
Currently we only set the DRM_CONNECTOR_POLL_{DISCONNECT,CONNECT} bits in intel_connector->polled (the base setting), leading to some confusing looking code to reset drm_connector->polled (the actual setting) to DRM_CONNECTOR_POLL_HPD. Let's set intel_connector->polled = DRM_CONNECTOR_POLL_HPD for all hpd capable connectors, and then we don't need so many special cases in the hotplug code. Signed-off-by: -
Ville Syrjälä authored
No point in looping over all connectors for each hpd pin. Just loop over each connector first and deal with each one's hpd pin. Then loop over all the hpd pins to mark them as enabled again. Signed-off-by:
-
Ville Syrjälä authored
We have a nice little helper to compute a single LUT entry for everything except the 8bpc legacy gamma mode. Let's complete the set. Signed-off-by:
Emil Velikov <emil.velikov@collabora.com>
-
Daniele Ceraolo Spurio authored
We are quite trigger happy in cleaning up the firmware blobs, as we do so from several error/fini paths in GuC/HuC/uC code. We do have the __uc_cleanup_firmwares cleanup function, which unwinds __uc_fetch_firmwares and is already called both from the error path of gem_init and from gem_driver_release, so let's stop cleaning up from all the other paths. The fact that we're not cleaning the firmware immediately means that we can't consider firmware availability as an indication of initialization success. A "LOADABLE" status has been added to indicate that the initialization was successful, to be used to selectively load HuC only if HuC init has completed (HuC init failure is not considered a fatal error). v2: s/ready_to_load/loadable (Michal), only run guc/huc_fini if the fw is in loadable state Signed-off-by:Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> #v1 Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
Now that we can differentiate wants vs uses GuC/HuC, intel_uc_init is restricted to running only if we have successfully fetched the required blob(s) and are committed to using the microcontroller(s). The only remaining thing that can go wrong in uc_init is the allocation of GuC/HuC related objects; if we get such a failure better to bail out immediately instead of wedging later, like we do for e.g. intel_engines_init, since without objects we can't use the HW, including not being able to attempt the firmware load. While at it, remove the unneeded fw_cleanup call (this is handled outside of gt_init) and add a probe failure injection point for testing. Also, update the logs for <g/h>uc_init failures to probe_failure() since they will cause the driver load to fail. Signed-off-by:
Fernando Pacheco <fernando.pacheco@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
To be able to differentiate the before and after of our commitment to GuC submission, which will be used in follow-up patches to early set-up the submission structures. v2: move functions to guc_submission.h (Michal) Signed-off-by:
-
Daniele Ceraolo Spurio authored
To be able to setup GuC submission functions during engine init we need to commit to using GuC as soon as possible. Currently, the only thing that can stop us from using the microcontrollers once we've fetched the blobs is a fundamental error (e.g. OOM); given that if we hit such an error we can't really fall-back to anything, we can "officialize" the FW fetching completion as the moment at which we're committing to using GuC. To better differentiate this case, the uses_guc check, which indicates that GuC is supported and was selected in modparam, is renamed to wants_guc and a new uses_guc is introduced to represent the case were we're committed to using the GuC. Note that uses_guc does still not imply that the blob is actually loaded on the HW (is_running is the check for that). Also, since we need to have attempted the fetch for the result of uses_guc to be meaningful, we need to make sure we've moved away from INTEL_UC_FIRMWARE_SELECTED. All the GuC changes have been mirrored on the HuC for coherency. v2: split fetch return changes and new macros to their own patches, support HuC only if GuC is wanted, improve "used" state description (Michal) v3: s/wants_huc/uses_huc in uc_init_wopcm Signed-off-by: -
Daniele Ceraolo Spurio authored
We want to map uC-level checks to GuC/HuC-level ones. The mapping from the uC state to the GuC/HuC one follows the same pattern for all the functions: uc_xxx_guc() -> guc_is_yyy() So we can easily use a macro to autogenerate the functions via macros by passing in the 2 mapped states. v2: Split this change to its own patch (Michal) Signed-off-by:
-
Daniele Ceraolo Spurio authored
In a follow up patch we will rely on the fact that the status always moves away from "SELECTED" after the fetch is attempted to decide what to do with the GuC. v2: Split this change to its own patch (Michal) Signed-off-by:
-
Daniele Ceraolo Spurio authored
use intel_uc_uses_guc_submission() directly instead, to be consistent in the way we check what we want to do with the GuC. v2: do not go through ctx->vm->gt, use i915->gt instead Signed-off-by:
-
Daniele Ceraolo Spurio authored
use intel_uc_uses_guc() directly instead, to be consistent in the way we check what we want to do with the GuC. v2: split guc_log_info changes to their own patch (Michal) Signed-off-by:
-
Daniele Ceraolo Spurio authored
The log struct is the only thing the function needs (apart from the seq_file), so we can pass just that instead of the whole dev_priv. v2: Split this change to its own patch (Michal) Signed-off-by:
-
Chris Wilson authored
In preparation for making GEM execbuf parallel, we need to be prepared to handle very early declaration of dependencies -- even before our signaler has itself been submitted. References: a79ca656 ("drm/i915: Push the wakeref->count deferral to the backend") Signed-off-by:
-
Chris Wilson authored
While we know that the waiters cannot disappear as we walk our list (only that they might be added), the same cannot be said for our signalers as they may be completed by the HW and retired as we process this request. Ergo we need to use rcu to protect the list iteration and remember to mark up the list_del_rcu. v2: Mark the deps as safe-for-rcu Fixes: 793c2261 ("drm/i915/gt: Protect execlists_hold/unhold from new waiters") Fixes: 32ff621f ("drm/i915/gt: Allow temporary suspension of inflight requests") Signed-off-by:
-
Matthew Auld authored
The real one can be found in i915_scheduler.c. Signed-off-by:
-
Manasi Navare authored
If one of the synced crtcs needs a full modeset, we need to make sure all the synced crtcs are forced a full modeset. v3: * Remove ~BIT(cpu_trans) which is a nop (Ville) * use get_new_crtc_state and remove error check (Ville) v2: * Add tiles based on cpu_trans check (Ville) Suggested-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200214114126.13192-3-manasi.d.navare@intel.com
-
Manasi Navare authored
This patch pushes out the computation of master and slave transcoders in crtc states after encoder's compute_config hook. This ensures that the assigned master slave crtcs have exact same mode and timings which is a requirement for Port sync mode to be enabled. v3: * Make crtc_state const, remove crtc state NULL init (Ville) v2: * Correct indentation * Rename to intel_ddi_port_sync_transcoders (Ville) * remove unwanted debug (Ville) Suggested-by:
-
Ville Syrjälä authored
Add an optional secondary encoder state compute hook. This gets called after the normak .compute_config() has been called for all the encoders in the state. Thus in the new hook we can rely on all derived state populated by .compute_config() to be already set up. Should be useful for MST and port sync master/slave transcoder selection. Signed-off-by:
-
- 19 Feb, 2020 7 commits
-
-
Chris Wilson authored
For dgfx, we do not need to reconfigure the IA/ring frequencies of the main processors as they are distinct devices. Signed-off-by:
-
Chris Wilson authored
Currently, we check that a new context has a clear set of general purpose registers. Add a little bit of hostility by preempting our new context and re-poisoning the GPR to ensure that there is no context leakage from preemption. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200219123418.1447428-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Check that the CTX_TIMESTAMP is monotonic across context save/restore and upon preemption. References: https://gitlab.freedesktop.org/drm/intel/issues/1233Signed-off-by:
-
Chris Wilson authored
Read the rawclk_freq during runtime info probing, prior to its first use in computing the CS timestamp frequency. Then store it in the runtime info, and include it in the debug printouts. Closes: https://gitlab.freedesktop.org/drm/intel/issues/834Signed-off-by:
-
Chris Wilson authored
On dgfx, we only use l3cc and not mocs, but we share the table containing both register definitions with Tigerlake. This confuses our selftest that verifies that both sets of registers do contain the values in our tables after various events (idling, reset, activity etc). When constructing the table of register definitions, also include the flags for which registers are valid so that information is computed centrally and available to all callers. Signed-off-by:
-
Jani Nikula authored
Push irq uninstall further up, by splitting i915_driver_modeset_remove() to two, the part with working irqs before irq uninstall, and the part after irq uninstall. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Split intel_modeset_driver_remove() to two, the part with working irqs before irq uninstall, and the part after irq uninstall. Move irq_unintall() closer to the layer it belongs. The error path in i915_driver_modeset_probe() looks obviously weird after this, but remains as good or broken as it ever was. No functional changes. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
