- 12 Nov, 2014 1 commit
-
-
Karsten Merker authored
On the LeMaker Banana Pi, probing the external ethernet PHY connected to the SoC's internal GMAC module sometimes fails. The PHY power supply is handled via a GPIO-controlled regulator, and the existing regulator startup-delay of 50000us is too short to make sure that the PHY is always fully powered up when it is queried by phylib. Tests have shown that to provide a reliable PHY detection, the startup-delay has to be increased to at least 60000us. To have a certain safety margin and to cater for manufacturing variations between different boards, the delay gets set to 100000us as discussed on the linux-arm-kernel mailinglist. Signed-off-by:
Karsten Merker <merker@debian.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
- 11 Nov, 2014 2 commits
-
-
Chen-Yu Tsai authored
The apb2 clocks are actually the same as apb1 clocks on the other sunxi platforms, hence compatible with "allwinner,sun4i-a10-apb1-clk". Update the dtsi to use the new unified apb1 clk. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Emilio López authored
With the new factors infrastructure in place, we can unify apb1 and apb1_mux as a single clock now. Signed-off-by:
Emilio López <emilio@elopez.com.ar> [wens@csie.org: Change apb1 node label to "apb1"; reword commit title] Signed-off-by:
-
- 07 Nov, 2014 2 commits
-
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Roman Byshko <rbyshko@gmail.com>
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
Carlo Caione <carlo@caione.org> Acked-by:
Olliver Schinagl <oliver@schinagl.nl> Acked-by:
Stefan Roese <sr@denx.de>
-
- 05 Nov, 2014 2 commits
-
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu>
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
- 04 Nov, 2014 1 commit
-
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
FUKAUMI Naoki <naobsd@gmail.com>
-
- 31 Oct, 2014 6 commits
-
-
Chen-Yu Tsai authored
The A80 Optimus board exposes uart4 on the GPIO expansion header. Enable it so we can use it. Also enable the internal pull-ups, as there doesn't seem to be external pull-up resistors for pins on the expansion header. Signed-off-by:
-
Chen-Yu Tsai authored
uart4 only has one possible pinmux setting on the A80 SoC. Signed-off-by:
-
Chen-Yu Tsai authored
The A80 Optimus board has 3 usable LEDs that are controlled via GPIO. This patch adds support for 2 of them which are driver by GPIOs in the main pin controller. The remaining one uses GPIO from the R_PIO controller, which we don't support yet. Signed-off-by:
-
Chen-Yu Tsai authored
i2c3 is exposed on the GPIO extension header. Enable it so we can use it. Also enable internal pull-ups on the pins, as they don't seem to have external pull-up resistors. Signed-off-by:
-
Chen-Yu Tsai authored
i2c3 has only one possible pinmux setting on the A80 SoC. Signed-off-by:
-
Chen-Yu Tsai authored
The A80 has 5 i2c controllers in the main processor block. Signed-off-by:
-
- 30 Oct, 2014 2 commits
-
-
Maxime Ripard authored
Enable the UART0 muxing, as set up by the bootloader. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Maxime Ripard authored
The A80 pinctrl driver is just as usual our pinctrl/gpio/external interrupt controller. Nothing really out of the extraordinary here... Signed-off-by:
-
- 28 Oct, 2014 1 commit
-
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
- 27 Oct, 2014 2 commits
-
-
Maxime Ripard authored
During the GPL to GPL/X11 licensing migration, the GPL notice introduced mentionned the device trees as a library, which is not really accurate. It began to spread by copy and paste. Fix all these library mentions to reflect the file that it's actually just a file. Signed-off-by: -
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
Boris BREZILLON <boris.brezillon@free-electrons.com>
-
- 21 Oct, 2014 15 commits
-
-
Chen-Yu Tsai authored
Now that we have driver support for the basic clocks, add them to the dtsi and update existing peripherals. Also add reset controls to match. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: -
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: -
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
David Lanzendörfer <david.lanzendoerfer@o2s.ch> Acked-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
Maxime Ripard authored
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by:
-
- 20 Oct, 2014 6 commits
-
-
Chen-Yu Tsai authored
The A80 Optimus Board is was launched with the Allwinner A80 SoC. It was jointly developed by Allwinner and Merrii. This board has a UART port, a JTAG connector, USB host ports, a USB 3.0 OTG connector, an HDMI output, a micro SD slot, 8G NAND flash, 4G DRAM, a camera sensor interface, a WiFi/BT combo chip, a headphone jack, IR receiver, and additional GPIO headers. This patch adds only basic support. Signed-off-by:
Andreas Färber <afaerber@suse.de>
-
Chen-Yu Tsai authored
The Allwinner A80 is a new multi-purpose SoC with 4 Cortex-A7 and 4 Cortex-A15 cores in a big.LITTLE architecture, and a 64-core PowerVR G6230 GPU. Signed-off-by:
-
Iain Paton authored
This adds support for the Olimex A20-OLinuXino-Lime2 https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2 Differences to previous Lime boards are 1GB RAM and gigabit ethernet Signed-off-by:
Iain Paton <ipaton0@gmail.com> Signed-off-by:
-
Hans de Goede authored
The Mele M3 is yet another Allwinnner based Android top set box from Mele. It uses a housing similar to the A2000, but without the USM sata storage slot at the top. It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices), 100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expenansion headers: http://www.lemaker.org/Signed-off-by:
-
