- 27 Jul, 2011 40 commits
-
-
Oliver Endriss authored
Driver added to Makefile and Kconfig. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Oliver Endriss authored
Codingstyle fixes Signed-off-by:
-
Ralph Metzler authored
Driver support for Digital Devices ddbridge-based cards: Octopus, Octopus mini, Octopus LE, cineS2(v6) with DuoFlex S2 and/or DuoFlex CT tuners. Driver was taken from ddbridge-0.6.1.tar.bz2. Signed-off-by:
Ralph Metzler <rmetzler@digitaldevices.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
The CHK_ERROR macro does a flow control, violating chapter 12 of the Documentation/CodingStyle. Doing flow controls inside macros is a bad idea, as it hides what's happening. It also hides the var "status" with is also a bad idea. The changes were done by this small perl script: my $blk=0; while (<>) { s/^\s+// if ($blk); $f =~ s/\s+$// if ($blk && /^\(/); $blk = 1 if (!m/\#/ && m/CHK_ERROR/); $blk=0 if ($blk && m/\;/); s/\n/ / if ($blk); $f.=$_; }; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;([^\n]*),\n\1status = \2;\3\n\1if (status < 0)\n\1\tbreak;,g; print $f; And manually fixed. Signed-off-by: -
Mauro Carvalho Chehab authored
One of the problems of the old CHECK_ERROR is that it was hiding the status parameter. Maybe due to that, on a few places, the return code might lead to return incorrect status: drivers/media/dvb/frontends/drxk_hard.c: In function ‘load_microcode.clone.0’: drivers/media/dvb/frontends/drxk_hard.c:1281: warning: ‘status’ may be used uninitialized in this function drivers/media/dvb/frontends/drxk_hard.c:1281: note: ‘status’ was declared here drivers/media/dvb/frontends/drxk_hard.c: In function ‘GetLockStatus’: drivers/media/dvb/frontends/drxk_hard.c:1792: warning: ‘status’ may be used uninitialized in this function drivers/media/dvb/frontends/drxk_hard.c: In function ‘Start.clone.7’: drivers/media/dvb/frontends/drxk_hard.c:1734: warning: ‘status’ may be used uninitialized in this function Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/dvb/frontends/drxk_hard.c: In function ‘SetDVBT’: drivers/media/dvb/frontends/drxk_hard.c:3766: warning: enumeration value ‘BANDWIDTH_5_MHZ’ not handled in switch drivers/media/dvb/frontends/drxk_hard.c:3766: warning: enumeration value ‘BANDWIDTH_10_MHZ’ not handled in switch drivers/media/dvb/frontends/drxk_hard.c:3766: warning: enumeration value ‘BANDWIDTH_1_712_MHZ’ not handled in switch Signed-off-by: -
Mauro Carvalho Chehab authored
The CHK_ERROR macro does a flow control, violating chapter 12 of the Documentation/CodingStyle. Doing flow controls inside macros is a bad idea, as it hides what's happening. It also hides the var "status" with is also a bad idea. The changes were done by this small perl script: my $blk=0; while (<>) { s/^\s+// if ($blk); $f =~ s/\s+$// if ($blk && /^\(/); $blk = 1 if (!m/\#/ && m/CHK_ERROR/); $blk=0 if ($blk && m/\;/); s/\n/ / if ($blk); $f.=$_; }; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;([^\n]*),\n\1status = \2;\3\n\1if (status < 0)\n\1\tbreak;,g; print $f; And manually fixed. Signed-off-by: -
Mauro Carvalho Chehab authored
The CHK_ERROR macro does a flow control, violating chapter 12 of the Documentation/CodingStyle. Doing flow controls inside macros is a bad idea, as it hides what's happening. It also hides the var "status" with is also a bad idea. The changes were done by this small perl script: my $blk=0; while (<>) { s /^\s+// if ($blk); $f =~ s/\s+$// if ($blk && /^\(/); $blk = 1 if (!m/\#/ && m/CHK_ERROR/); $blk=0 if ($blk && m/\;/); s/\n/ / if ($blk); $f.=$_; }; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;([^\n]*),\n\1status = \2;\3\n\1if (status < 0)\n\1\tbreak;,g; print $f; And manually fixed. Signed-off-by: -
Mauro Carvalho Chehab authored
/home/v4l/v4l/patchwork/drivers/media/dvb/frontends/drxk_hard.c:181: multiple definition of `MulDiv32' drivers/media/dvb/frontends/drxd.o:/home/v4l/v4l/patchwork/drivers/media/dvb/frontends/drxd_hard.c:236: first defined here Signed-off-by: -
Oliver Endriss authored
As the CI requires a continuous data stream, the driver inserts dummy packets when necessary. Do not pass these packets to userspace anymore. Signed-off-by:
-
Oliver Endriss authored
Modifications for latest cxd2099. Signed-off-by:
-
Oliver Endriss authored
Codingstyle fixes. Signed-off-by:
-
Ralph Metzler authored
Import latest driver from ddbridge-0.6.1.tar.bz2. Signed-off-by:
-
Oliver Endriss authored
Support DuoFlex CT with Digital Devices CineS2 and Mystique SaTiX-S2. Signed-off-by:
-
Oliver Endriss authored
Fix name of Digital Devices PCIe/miniPCIe. Signed-off-by:
-
Oliver Endriss authored
Fix return code if no demux was found (cineS2_probe). Signed-off-by:
-
Oliver Endriss authored
Codingstyle fixes Signed-off-by:
-
Ralph Metzler authored
Support Digital Devices DuoFlex CT with ngene. Signed-off-by:
-
Oliver Endriss authored
Get DRX-K firmware for Digital Devices DVB-CT cards Signed-off-by:
-
Oliver Endriss authored
Add both drivers to Makefile and Kconfig. Signed-off-by:
-
Oliver Endriss authored
Tons of coding-style fixes Signed-off-by:
-
Oliver Endriss authored
Deleted all unused symbold from drxk_map.h, which reduced the size from 1.1M to 37K! Signed-off-by:
-
Ralph Metzler authored
Driver for the DRX-K DVB-C/T demodulator. Signed-off-by:
Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Oliver Endriss authored
Signed-off-by:
-
Ralph Metzler authored
Driver for the NXP TDA18271c2 silicon tuner. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Kamil Debski authored
Add support for the codec controls to the v4l2 control framework. [mchehab@redhat.com: Fix merge conflicts and removed some hunks that were adding blank lines without a good reason] Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Kamil Debski authored
Add control definitions and documentation for controls specific to codec devices. Signed-off-by:
-
Kamil Debski authored
Add fourcc definitions and documentation for the following compressed formats: H264, H264 without start codes, MPEG1/2/4 ES, XVID, VC1 Annex G and Annex L compliant. Signed-off-by:
-
Sakari Ailus authored
Document V4L2 control endianness as machine endianness. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Sakari Ailus authored
This patch adds the driver for the adp1653 LED flash controller. This controller supports a high power led in flash and torch modes and an indicator light, sometimes also called privacy light. The adp1653 is used on the Nokia N900. Signed-off-by:
Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
David Cohen <dacohen@gmail.com> Acked-by:
-
Sakari Ailus authored
Add documentation for V4L2 flash controls. Signed-off-by:
-
Sakari Ailus authored
Add a control class and a set of controls to support LED and Xenon flash devices. An example of such a device is the adp1653. Signed-off-by:
-
Hans Verkuil authored
[mchehab@redhat.com: Fix a merge conflict and make compat.xml coherent with v4l2.xml] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Fix sleep-in-atomic-context bug in vivi: Jun 28 18:14:39 tschai kernel: [ 80.970478] BUG: sleeping function called from invalid context at kernel/mutex.c:271 Jun 28 18:14:39 tschai kernel: [ 80.970483] in_atomic(): 0, irqs_disabled(): 1, pid: 2854, name: vivi-000 Jun 28 18:14:39 tschai kernel: [ 80.970485] INFO: lockdep is turned off. Jun 28 18:14:39 tschai kernel: [ 80.970486] irq event stamp: 0 Jun 28 18:14:39 tschai kernel: [ 80.970487] hardirqs last enabled at (0): [< (null)>] (null) Jun 28 18:14:39 tschai kernel: [ 80.970490] hardirqs last disabled at (0): [<ffffffff8109a90b>] copy_process+0x61b/0x1440 Jun 28 18:14:39 tschai kernel: [ 80.970495] softirqs last enabled at (0): [<ffffffff8109a90b>] copy_process+0x61b/0x1440 Jun 28 18:14:39 tschai kernel: [ 80.970498] softirqs last disabled at (0): [< (null)>] (null) Jun 28 18:14:39 tschai kernel: [ 80.970502] Pid: 2854, comm: vivi-000 Tainted: P 3.0.0-rc1-tschai #372 Jun 28 18:14:39 tschai kernel: [ 80.970504] Call Trace: Jun 28 18:14:39 tschai kernel: [ 80.970509] [<ffffffff81089be3>] __might_sleep+0xf3/0x130 Jun 28 18:14:39 tschai kernel: [ 80.970512] [<ffffffff8176967f>] mutex_lock_nested+0x2f/0x60 Jun 28 18:14:39 tschai kernel: [ 80.970517] [<ffffffffa0acee3e>] vivi_fillbuff+0x20e/0x3f0 [vivi] Jun 28 18:14:39 tschai kernel: [ 80.970520] [<ffffffff81407004>] ? do_raw_spin_lock+0x54/0x150 Jun 28 18:14:39 tschai kernel: [ 80.970524] [<ffffffff8104ef5e>] ? read_tsc+0xe/0x20 Jun 28 18:14:39 tschai kernel: [ 80.970528] [<ffffffff810c9d87>] ? getnstimeofday+0x57/0xe0 Jun 28 18:14:39 tschai kernel: [ 80.970531] [<ffffffffa0acf1b1>] vivi_thread+0x191/0x2f0 [vivi] Jun 28 18:14:39 tschai kernel: [ 80.970534] [<ffffffff81093aa0>] ? try_to_wake_up+0x2d0/0x2d0 Jun 28 18:14:39 tschai kernel: [ 80.970537] [<ffffffffa0acf020>] ? vivi_fillbuff+0x3f0/0x3f0 [vivi] Jun 28 18:14:39 tschai kernel: [ 80.970541] [<ffffffff810bff46>] kthread+0xb6/0xc0 Jun 28 18:14:39 tschai kernel: [ 80.970544] [<ffffffff817743e4>] kernel_thread_helper+0x4/0x10 Jun 28 18:14:39 tschai kernel: [ 80.970547] [<ffffffff8176b4d4>] ? retint_restore_args+0x13/0x13 Jun 28 18:14:39 tschai kernel: [ 80.970550] [<ffffffff810bfe90>] ? __init_kthread_worker+0x70/0x70 Jun 28 18:14:39 tschai kernel: [ 80.970552] [<ffffffff817743e0>] ? gs_change+0x13/0x13 This bug was introduced in 2.6.39. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
By default no control events are sent to the application that caused the control value or flags change (i.e. the control(s) passed to VIDIOC_S_CTRL or VIDIOC_S_EXT_CTRLS). But if a change in one control causes a change in another control that was not part of the control(s) in VIDIOC_S_CTRL or S_EXT_CTRLS, then the application should be notified. Signed-off-by:
-
Hans Verkuil authored
The new values were never copied to userspace due to this copy and paste error. This was introduced during the rewrite of this part of the code in commit 3219f8a362640b7e4b7e2187b1094c4e46d85aa0. Signed-off-by:
-
