- 12 Jul, 2018 9 commits
-
-
Jernej Skrabec authored
Initial implementation of DE2 planes only supported fixed zpos. Expand implementation with configurable zpos property. Implementation background: Channel in DE2 driver represents one DRM plane, whereas pipe is just mapped channel to known Z position. Pipe 0 will always be at the bottom, pipe 1 just above pipe 0 and so on. If, for example, channel 1 is mapped at pipe 0 and channel 0 at pipe 1, whatever is on channel 0 will appear on top. Before this commit, channel id was used for addressing channel related registers (prefixed with SUN8I_MIXER_CHAN_UI_ or SUN8I_MIXER_CHAN_VI_) and pipe registers (prefixed with SUN8I_MIXER_BLEND_). Additionally, register SUN8I_MIXER_BLEND_ROUTE, which takes care for mapping channels to pipes had fixed value. It mapped channel 0 to pipe 0, 1 to 1 and so on. Consequence of all that was fixed Z order of planes. With this commit, pipe registers are using zpos property as index and channel related registers still use channel id as index. Pipe mapping register is now set dynamically too and pipe enable register is rebuild every time to make sure only active pipes are enabled. Testing was done to confirm that there is no issues if bottom plane contains pixels with alpha value < 0xff and if it doesn't whole screen. Tested-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706164732.24166-1-jernej.skrabec@siol.net
-
Rodrigo Siqueira authored
This patch appends the minimum helpers related to framebuffer and plane to make vkms minimally usable. Changes since V1: - None Changes since V2: - Squash "Add plane helper struct" and "Add helper for framebuffer create" Changes since V3: Daniel Vetter: - Remove atomic_check from plane helper Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/d37807da7d3b39444b4c9abb149fe3c518d07c61.1531402095.git.rodrigosiqueiramelo@gmail.com
-
Arnd Bergmann authored
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in a link error, as we try to access a symbol from the sun8i_tcon_top.ko module: ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun8i-drm-hdmi.ko] undefined! ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined! This solves the problem by adding a silent symbol for the tcon_top module, building it as a separate module in exactly the cases that we need it, but in a way that it is reachable by the other modules. Fixes: 57e23de0 ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs") Fixes: ef0cf644 ("drm/sun4i: Add support for traversing graph with TCON TOP") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jernej Skrabec authored
Currently, TCON supports 2 ways to match TCON with engine (mixer in this case). Old way is to just traverse of graph backwards and compare node pointer. New way is to match TCON and engine by their respective ids. All SoCs with DE2 enabled till now used the old way, which means mixer id was never used and thus never implemented. However, for R40, only the new way will be used. To prepare for that, implement mixer id fetching from DT. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c:228:24: warning: symbol 'sun8i_dw_hdmi_pltfm_driver' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Rodrigo Siqueira authored
This commit adds regular vblank events simulated through hrtimers, which is a feature required by VKMS to mimic real hardware. Additionally, all the vblank event send after pageflip is kept in the atomic_flush function. Changes since V1: - Compute the vblank timer interval per interruption Ville Syrjälä and Daniel Vetter: - Removes hardcoded vblank interval to get it from user space Changes since V2: Chris Wilson - Removes unnecessary algorithm to compute the next period Daniel Vetter: - Uses drm_calc_timestamping_constants to get the vblank interval instead of calculating it manually - Adds disable_vblank helper that turns of crtc - Simplifies implementation by using drm_crtc_arm_vblank_event - Replaces the code in atomic_begin to atomic_flush - Removes unnecessary field in vkms_output Changes since V3: Daniel Vetter: - Squash "drm/vkms: Add atomic helpers functions" into the commit that handling vblank events simulated by hrtimers Signed-off-by:
-
Rodrigo Siqueira authored
This patch adds the struct drm_connector_helper_funcs with some necessary hooks. Additionally, it also adds some missing hooks at drm_connector_funcs. Changes since V1: - None Change since V2: Daniel Vetter: - Remove vkms_conn_mode_valid Signed-off-by:
-
Eames Trinh authored
Signed-off-by:
Eames Trinh <eamestrinh@gmail.com> Signed-off-by:
-
Rodrigo Siqueira authored
VKMS currently does not handle dumb data, and as a consequence, it does not provide mechanisms for handling gem. This commit adds the necessary support for gem object/handler and the dumb functions. Changes since V1: Daniel Vetter: - Add dumb buffer support to the same patchset Changes since V2: Haneen: - Add missing gem_free_object_unlocked callback to fix the warning "Memory manager not clean during takedown" Signed-off-by:
-
- 11 Jul, 2018 13 commits
-
-
Noralf Trønnes authored
Commit 894a677f ("drm/cma-helper: Use the generic fbdev emulation") broke almost all drivers that use the CMA helper. The reason is that drm_client_new() requires that the DRM device has been registered, but the drivers register fbdev before registering DRM. Remove the requirement that DRM should be registered when creating a new client. Fixes: c76f0f7c ("drm: Begin an API for in-kernel clients") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Tested-by:
Icenowy Zheng <icenowy@aosc.io> Reviewed-by:
-
Noralf Trønnes authored
include/drm/tinydrm/tinydrm.h:34: warning: Function parameter or member 'fb_dirty' not described in 'tinydrm_device' drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'crtc_state' not described in 'mipi_dbi_enable_flush' drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'plane_state' not described in 'mipi_dbi_enable_flush' Move struct member docs inline so it's not missed next time. Cc: David Lechner <david@lechnology.com> Signed-off-by:
David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710150518.10528-1-noralf@tronnes.org
-
Vladimir Zapolskiy authored
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel. Note that this aged panel is already found in the kernel sources, for instance in board mach files mach-mx21ads.c, mach-mx27ads.c, mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706185101.31186-1-vz@mleia.com
-
Jernej Skrabec authored
They are currently sorted alphabetically. However, they should be sorted by release date of the family and then alphabetically. Fixes: 03c35dbf ("dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHY") Reviewed-by:
-
Jernej Skrabec authored
Now that R40 TCON migrated to runtime mux configuration, old code can be removed. Reviewed-by:
-
Jernej Skrabec authored
We want to be able to set TCON TOP muxes at runtime. Add helpers for that. Old, static configuration of muxes at probe time is preserved for now. It will be removed when R40 TCON starts using them. Reviewed-by:
-
Jernej Skrabec authored
Includes are not alphabetically ordered. Reorder them. Reviewed-by:
-
Jernej Skrabec authored
If error happens in sun8i_dw_hdmi_find_possible_crtcs(), nodes are not released with of_node_put() before returning. Fix that by calling of_node_put() when necessary. While on it, clean up the code by using of_graph_get_remote_node() which also lowers number of cases where error handling has to be performed. Fixes: 57e23de0 ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs") Reviewed-by:
-
Jernej Skrabec authored
TCON description is expanded with R40 TV TCON compatible. It is a bit special, because it is connected to TCON TOP instead directly to mixer and it needs special handling. Reviewed-by:
-
Jernej Skrabec authored
Function sun4i_tcon_find_engine_traverse() doesn't release node if it needs to traverse of graph deeper than 1 level. Fix this by calling of_node_put(). Fixes: 49836b11 ("drm/sun4i: tcon: Generalize engine search algorithm") Reviewed-by:
-
Jernej Skrabec authored
There is no need to acquire reference to clock just to get its name. This commit just cleans up the code. There is no functional change. Reviewed-by:
-
Jernej Skrabec authored
R40 has versatile display pipeline. It supports two simultanious outputs on various outputs (TVE, VGA, HDMI, MIPI DSI, LCD). Reviewed-by:
-
Jernej Skrabec authored
R40 has pretty unique display pipeline. It supports two outputs at the same time. Possible outputs: - 1x HDMI, - 2x TV output - 1x VGA, - 1x MIPI DSI and - 2x LCD outputs That is the biggest number of possible outputs from all Allwinner SoC. Because of that, add new compatible for it. Reviewed-by:
-
- 10 Jul, 2018 18 commits
-
-
Thierry Reding authored
Use this helper to get rid of some extra boilerplate code. Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Dan Carpenter authored
The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a negative error code, then "ret < ARRAY_SIZE(id)" is false because the negative error code is type promoted to a high positive value. Fixes: 02051ca0 ("drm/panel: add S6E8AA0 driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Nickey Yang authored
The KINGDISPLAY KD097D04 is a 9.7" panel with a 1536x2048 resolution and connected to DSI using 8 lanes. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Acked-by:
-
Nickey Yang authored
Kingdisplay Technology Co., Ltd, established in China Shenzhen in 2006, is a national high-tech enterprise specializing in the R&D, manufacturing and marketing of TFT-LCM and touch panel. Signed-off-by:
-
Lin Huang authored
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse the Innolux P079ZCA panel driver. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - Document source of init-commands - 4 lanes per DSI interface Signed-off-by:
Lin Huang <hl@rock-chips.com> Signed-off-by:
-
Lin Huang authored
The Innolux P097PFG panel is 9.7" panel with 1536X2048 resolution, it reuse P079ZCA panel driver, so improve p079ZCA dt-binding to support P097PFG. Changes in v2: - None Changes in v3: - None Changes in v4: - None Changes in v5: - use separate file for binding - keep power supplies as required Signed-off-by:
-
Lin Huang authored
When panel power down, p079zca need delay between reset and disable power supply, but p097pfg does not need it. Similarly p097zca needs a delay after entering panel sleep mode. So add two delay properties, so we can meet these two panel power down sequence. Signed-off-by:
-
Lin Huang authored
Refactor Innolux P079ZCA panel driver, let it support multi panels from Innolux that share similar power sequences. Panels may require different power supplies so use regulator bulk interfaces and define per panel supply-names. Changes in v2: - Change regulator property name to meet the panel datasheet Changes in v3: - this patch only refactor P079ZCA panel to support multi panel, support P097PFG panel in another patch Changes in v4: - Modify the patch which suggest by Thierry Changes in v5: - use regulator_bulk to handle different supply number Signed-off-by:
-
Colin Ian King authored
Currently, ret is being checked for an error condition however it is not being assigned in the previous statement on the call of function mipi_dsi_dcs_exit_sleep_mode. Add in the missing assignment of ret. Detected by CoverityScan, CID#1470174, 1470178 ("Unchecked return value") Fixes: 26aec255 ("drm/panel: Add Ilitek ILI9881c panel driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Michal Vokáč authored
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480) TFT LCD panel. The panel has 24-bit parallel interface and can be supported by the simple panel driver. Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by:
-
Michal Vokáč authored
DataImage is a Taiwan-based manufacturer of LCD panels. Signed-off-by:
-
Christoph Fritz authored
This patch adds support for Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel. Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by:
-
Tomi Valkeinen authored
Add support for newhaven,nhd-4.3-480272ef-atxl to panel-simple. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Peter Ujfalusi authored
The sync in some panels needs to be driven by different edge of the pixel clock compared to data. This is reflected by the DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags. Add similar similar definitions for bus_flags and convert the sync drive edge via drm_bus_flags_from_videomode(). Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Jyri Sarha <jsarha@ti.com> Signed-off-by:
-
Andrzej Hajda authored
The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the panel-simple driver. The panel is used in Exynos5250-arndale boards. Signed-off-by:
Maciej Purski <m.purski@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
The patch adds bindings to BOE HV070-WSA WSVGA panel. Bindings are compatible with simple panel bindings. Signed-off-by:
-
Boris Brezillon authored
Having a device with a status property != "okay" in the DT is a valid use case, and we should not prevent the registration of the DRM device when the DSI device connected to the DSI controller is disabled. Consider the ENODEV return code as a valid result and do not expose the DSI encoder/connector when it happens. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Boris Brezillon authored
There's no point searching for a drm_bridge or drm_panel if the OF node we're pointing has a status property that is not "okay" or "ok". Just return -ENODEV in this case. Signed-off-by:
-
